Database Info

[Q] Inevitable Newbie questions

Bought a rooted Captivate on ATT with ICS 4.0.4 and cyanogen 9. Tried to unlock it but could not get nv_data.bin to copy to my sdcard. Ended up just calling ATT and they gave me the code.
Forgive me if these answers are here. I looked, I couldn't find them.
Why doesn't cat /efs/nv_data.bin >> /sdcard/nv_data.bin result in the file being copied to the sdcard next to the sim card? Does that sdcard have a different name? I put an apk file on there via my computer (LOST.DIR was there from the phone, btw) but the phone said nothing was on the sdcard, which means I'm looking at the wrong sdcard somehow?
Why does my SGH-i897 have an i9000UGKG3 baseband and does that make the phone a GT-i9000 or is it still an i897?
Why does Google Play not allow registering a second device so that the app store can be accessed? I got the apk for the store downloaded and installed, but it just launches and then immediately closes.
I found KIESAIR-1.apk, downloaded it but that halts with a message "Application not installed." No idea why. Tried two versions of Kies Air. Both installations halted. I did check allow unknown sources. I want Kies Air because I cannot get USB to work with the phone on three different Windows laptops and that's a whole other kettle of fish.
Much appreciate any info you can share.
-Bob

To answer your first question, i think the command would be going to /mnt/sdcard instead of just /sdcard.

I loathe kies air. You can use "Air Droid", it should be on the market. There are other similar applications where you can transfer files via Wi-Fi. Hopefully someone else here will help you with accessing the market.
The baseband is the modem(or radio, not sure what term exactly) your phone is running, which is what the phone uses to get a signal and access the data network People report higher data speeds, better signal, and better GPS reception with different modems. It's still a Samsung Captivate. I'm using an I9000 modem as well.
That's all I can answer for you, I'm sort of a newbie too. Lots of reading and googling helps.

the micro sd card is mounted as
/sdcard/external_sd
the path /sdcard is the internal user storage.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app

Thank you very much. So that I can have better luck with Google searches in the future, can you tell me how you came to know this? All I came up with in my searches was /mnt/sdcard but that turned out to be the system card and I'm lucky I didn't screw up anything.
Found the various wikis on XDA for Captivate and now reading through them.
laughingT said:
the micro sd card is mounted as
/sdcard/external_sd
the path /sdcard is the internal user storage.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse

I had tried that, but forgot to mention it. As somebody else pointed out, that turned out to be the system card.

bobcov said:
Why does Google Play not allow registering a second device so that the app store can be accessed? I got the apk for the store downloaded and installed, but it just launches and then immediately closes.
-Bob
Click to expand...
Click to collapse
Are you sure gapps was ever flashed once CM9 was installed? You might flash it again anyway and see if that helps. I've never known Play to limit registrations.

It has to be part of the firmware? Is that what you mean by it has to be flashed? Where can I read about that? BTW, I now have access to the phone via Android Sync Manager over wifi. Trying to find a way to put contacts into it without using Gmail. Seems I can't see the entire file system. The contacts are supposed to be in a file in this path data/data/com.android.providers.contacts/databases/contacts.db, but that path doesn't show up. How come? I'll be looking back at this post someday chuckling, but for now, I'm mystified.

bobcov said:
It has to be part of the firmware? Is that what you mean by it has to be flashed? Where can I read about that? BTW, I now have access to the phone via Android Sync Manager over wifi. Trying to find a way to put contacts into it without using Gmail. Seems I can't see the entire file system. The contacts are supposed to be in a file in this path data/data/com.android.providers.contacts/databases/contacts.db, but that path doesn't show up. How come? I'll be looking back at this post someday chuckling, but for now, I'm mystified.
Click to expand...
Click to collapse
When you install cyanogenmod Google apps (gapps) aren't included. If the previous owner didn't add them then none of your Google apps nor your sign in will be present. Even if it is already installed a reinstall may help.
Download this: http://goo.im/gapps/gapps-ics-20120429-signed.zip
Reboot to recovery and install zip from sdcard. You'll have to find and choose the file you just downloaded. Reboot and see if things aren't square.
You can also do a nandroid backup from the recovery so you can get back to where you are now if things go awry. Side note, if you want to install the latest cm9 nightly the method is the same.
You can find clearer instructions via the cyanogenmod site should you feel uneasy about proceeding. I'm away from the PC and typing from my phone or I'd try to be more thorough. Good luck!
---------- Post added at 08:28 PM ---------- Previous post was at 08:19 PM ----------
bobcov said:
It has to be part of the firmware? Is that what you mean by it has to be flashed? Where can I read about that? BTW, I now have access to the phone via Android Sync Manager over wifi. Trying to find a way to put contacts into it without using Gmail. Seems I can't see the entire file system. The contacts are supposed to be in a file in this path data/data/com.android.providers.contacts/databases/contacts.db, but that path doesn't show up. How come? I'll be looking back at this post someday chuckling, but for now, I'm mystified.
Click to expand...
Click to collapse
I just checked and found my contacts where you mentioned. You probably just need to copy the file using a file manager and move it to an accessible location you can see from the PC. I like root explorer. ES file manager is good, too, and free.
Since you may not have gapps I'd try that first and it may create the contacts db.

Hi,before I can try what you suggested, I need to straighten out what's up with my file system. I still cannot see my external sd card in file operations, even though the phone shows it is present, lets me mount and unmount it. If I copy something to it from the laptop using a card reader, nothing shows up when it is mounted in the phone. The other mystery is that with ES file explorer, I still do not see the contacts.db file path, so I'm doing something wrong. Once I can see that path and see the external sd, I'll follow your instructions.
-B

Make sure you have root function enabled in es file explorer. It's in settings.
With the external sd , on cm9 you'll find it at /emmc. (or /mt/emmc)
But read up on flashing.... You won't regret it.
Sent from phone with app

i believe the external sd card is called emmc on the ics roms

try opening a terminal emulator, then type:
df
the ouput from df will give you total space and free space for mounted paths, including your sdcard, if it is mounted.
if you want to see rootsystem files, run su before df.
there is a free terminal emulator on google play, aka market, if you need it.
Sent from my SAMSUNG-SGH-I897 using xda app-developers app

bobcov said:
Hi,before I can try what you suggested, I need to straighten out what's up with my file system. I still cannot see my external sd card in file operations, even though the phone shows it is present, lets me mount and unmount it. If I copy something to it from the laptop using a card reader, nothing shows up when it is mounted in the phone. The other mystery is that with ES file explorer, I still do not see the contacts.db file path, so I'm doing something wrong. Once I can see that path and see the external sd, I'll follow your instructions.
-B
Click to expand...
Click to collapse
At this point, how do you feel about starting over? Some people aren't comfortable with a full factory reset and/or starting over with stock gingerbread, but I'd be leaning toward that at this point. I'm not completely sure it's necessary but I've wiped clean for less.

Well, after many days, I am now finally importing 750 contacts without exposing any of them to a 3rd party server such as Google, etc.
1. There's a link here somewhere for version 1.3.450.0 "Samsung USB Driver for Mobile Phones. The filename was SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
2. Forget about Kies. Somebody said it won't work unless it sees Touch Wiz. I don't know if it would work under any circumstances.
3. For my 750 contacts in blackberry, I made an .ipd backup of the blackberry using the RIM software, then used ABC Amber Blackberry Converter which can extract data from IPD backups and exported my contacts as CSV.
4. I used Windows Address Book to read the CSV file created by Amber and saved the file with .WAB as a Windows Address Book file.
5. I used the inexplicably free and astoundingly well-executed Wondershare MobileGo for Android program to link to my phone. On one computer it immediately identified the model and showed all contents. On another computer, it could not see the phone, and went to the web without prompting, downloaded a driver, installed it and loaded the phone into the program. Amazing. All I did was click on contacts on the left and then the small down arrow under the word "Import" on the Import icon. It took me about an hour to realize this was how to get the program to import different formats other than vcard. It somehow immediately found the .WAB file, and imported the 750 contacts where are now on the phone.
6. For the purposes of entertainment for those who know better and education for those who don't, here were some of my downfalls: All the apps may respond to that little funny symbol on the left, below the keyboard adjacent to "Samsung." I didn't know for the longest time that was a critical menu key. Also mirthful, I didn't know that you can just draw downward from the top of the screen and get a kind of status page where you will see "USB connected" which you must press if you want to copy stuff to the phone. I will now read the phone's manual.
It seems that the external card under Cyanogenmod 9 is /mnt/emmc/ instead of where programs expected it to be. I got a program called Directory Bind and tried to make it so that /mnt/emmc/ would automatically be seen as /mnt/sdcard/external_sd but it said that that wasn't a valid target. Any ideas there? Meantime I have done it from terminal but I don't think that will stick beyond a reboot.

Damn you learn quick. When I first discovered the menu key it was like discovering a while new world.

[Q] eMatic oem folder

Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.

Ematic: What is the browser?
What is the browser that is install from factory.. on Ematic devices ..as it is not "Chrome" [It almost looks like Dolphin], when I tried to do a regular .apk install of "Chrome" from the Google store it dies which almost tells me that it need to be pushed into the device. So am I correct that I need to find a downloadable .apk of "Chrome" for Android 4.0.3 ?

bfrench1990 said:
Hey xda. Sorry if this post has been misplaced, but I noticed there is no device forum for the tablet I am asking about today, and that is understandable. My girlfriend recently got an eMatic eGlide Pro II XL tablet for her birthday and it is running Android Ice Cream Sandwich 4.0.3. I noticed that it had a lot of bloatware and no google play store on it, and she wanted the play store, so I rooted the device for her and installed the play store and it works like a charm. The only problem I seem to have run into is this read only folder called "oem". The path for this partition is /oem/ and there are a few bloatware apps in there. For some reason though, I cannot edit or delete anything in that partition as it says it is read only even though i am using the root functions of ES File Explorer. I am able to modify other system apps though root explorer. I even tried using terminal emulator commands to remove the items but it still didn't work. Is there a way I can mount this folder as read/write? If I can, that would be a blessing, as I could delete the crapware that came with the tablet and the old version of YouTube that is buggy and not updateable thanks to being placed in the oem folder. Thanks for reading all this guys, I know it's a wall of text, haha.
Click to expand...
Click to collapse
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)

fsuinnc said:
How did you root the tablet? it seems there are several Ematic tablets being sold at wal-mart and I think people would like to know how you rooted it. (I know I would.)
Click to expand...
Click to collapse
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.

bfrench1990 said:
I used a tool called Root with Restore by Bin4ry. It took me a couple times. The first time I did it, all it managed to do was slow the tablet down, then i just performed a factory reset and tried again using the same process until it worked. It didn't take all that long. The hardest part is getting the adb drivers to recognize the tablet. I will attach my adb drivers so you don't have to go through all the rigamarole.
Navigate to wherever your android sdk folder is. Mine is at C:\Program Files (x86)\Android\android-sdk
Within the android-sdk folder, look for extras, then google, then usb_driver. Make a backup of everything in your usb_driver folder, just in case.
Next just extract the contents of the zip I attached to this post. Make sure USB debugging is on, and plug it in. It should be recognized assuming there isn't some other problem i haven't encountered or forgot to mention.
Once your computer recognizes the adb interface for your tablet, use the Root with Restore tool until it works.
Click to expand...
Click to collapse
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)

fsuinnc said:
Thanks, that's great info. I will try it out. (I have a Ematic egs005 7" on it's way to me. they seem to be very cheap right now at under $60)
Click to expand...
Click to collapse
I'll bet that you can get it rooted. You may have to edit those drivers though since I don't think my girlfriend's tablet isn't the same as the one you mentioned.
If the drivers I posted don't work for you, then open up "android_winusb.inf" from that zip file in your favorite text editor.
Somewhere under the "[Google.NTx86]" and "[Google.NTamd64]" sections, add this:
;eMatic egs005
Remember where you put those, cause what goes under those entries is the hardware ID of your tablet. You can get that by going under device manager and right clicking on your tablet, if it is unrecognized it should have a yellow triangle on it or something like that. Go to properties and go to the details tab, then from the drop down menu, select hardware IDs. In my case, two came up. Just pick one. If that one ends up not working later, use the one you didn't try.
Now, your entries should look like this:
;eMatic egs005
%CompositeAdbInterface% = USB_Install, (your hardware ID)
Next, try to update the drivers on your tablet via device manager. Right click on your tablet like we did last time, and click properties. Go to the driver tab, and hit the update driver button. You'll have to manually navigate to where your drivers are. Select the folder where you extracted the zip to (make sure you have the edited file in there!) and follow the procedure to update the driver.
Next, open up an adb window and type in adb devices. If you have something showing up, congrats! You should be able to try the root tool now. As always, be careful!

eglide pro ll xl
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z

Livinbad said:
I just bought the eglide pro ll xl also. From what I have read and done to my tab so far, it is already rooted from the factory. It sounds like a lot of the ematic tabs are. I've been researching different operating systems to put on my tab but there isn't anything that says it is specifically for mine. They pretty much just list the types of tablets the ROMS will work for. The question I have is what type of tablet is this. Allwinner a10? LY F1? TREQ? I would really like to know this and a good way to back up my current system so if I screw it up I can go back and try again.
-Z
Click to expand...
Click to collapse
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.

bfrench1990 said:
I didn't add most of those entries in the drivers file, it originated as a sort of "fix all" driver that was posted on xda to connect many many types of different devices to adb without hassle. I added a few of the entries using the hardware ID method I described above to accommodate some less popular devices that my friends and family asked me to root.
I think I heard talk somewhere about custom roms for the eGlide, but I have no clue how to flash them, and seeing as how that tablet wasn't mine, I did not want to try to flash one and brick it, lol. I couldn't find any recoveries or any other tool to flash things to it. If you do find a way, all I can say is be careful.
As far as backing up goes, root with restore supports unrooting as well. I never performed that function though, since root hasn't done anything bad for the tablets I put them on, haha. I'm not certain there is an easy backup method since as I said a second ago, no custom recoveries. To be safe, I would recommend a factory data reset before attempting any rooting/unrooting of this tablet.
I hope I helped with my feedback.
Click to expand...
Click to collapse
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.

Livinbad said:
I actually installed CWM 6.0.1.2 by Flowish on to my tab and it works great except for the process he has to get in to the recovery. I have to use the terminal emulator to launch it. That's why I am leery about installing a different ROM. If I can't get the thing to boot up properly I then can't get to the terminal emulator to get to recovery to restore my backup. I'm still searching and learning though. I'll figure it out eventually.
Click to expand...
Click to collapse
Check if there's fastboot for this tablet. There's a fastboot command to boot into the recovery. If not, then I would just not flash a Rom

[Tutorial] Proscan PLT-7035-PL Root and install GAPPS

Rooting and installing Google Play on the Proscan PLT7035-PL ** UPDATED **
*** Disclaimer ***
I am not responsible for bricked tablets, voided warranties, crashed computers and/or global thermonuclear war! This is what worked for me if you are unsure of anything in the following steps STOP NOW! There is no factory rom released for this tablet. If you brick it your possibly stuck until if and when they release an update!
These instructions assume you are competent to do the folling: get files on and off of your device using the mass storage driver, able to edit and understand changes to inf files, use command prompt, edit system user files and have enough patence to read all of the steps without skipping any. There are a few gotcha's that if are skipped will leave you pulling your hair out. Also these instructions are written for Windows. If your using Linux you shouldn't need my help anyways ..​
Click to expand...
Click to collapse
This tutorial may also work on other Chinese generic tablets. You would only need get the hardware vendor and product ID's from the device info for step 2. For the purpose of this post I wont be getting into that but the information is out there.. GOOGLE IS YOUR FRIEND
Introduction
Its likely if you are reading you have recently visited Big Lots and scored a $69 7" tablet. Only to get home and find virtually NO information on rooting it or installing Google Play or GAPPs. I know I was in that boat but after a few hours of messing around I got it. I am writing this to hopefully help the hundreds of others I see out there asking for help on this.
Step 1 Download Stuff (Things to round up before you even think about starting)
Root with Restore by Bin4ry v15 - http://forum.xda-developers.com/showthread.php?t=1886460 .** UPDATE ** I attached the version I used to this post
ADB Drivers - You have several options here, milage may very.** UPDATE ** I attached USB drivers to this post. I had to seperate the 64 and 32 bit drivers to get the files under the 8 mb limit for uploads
install android SDK http://dl.google.com/android/android-sdk_r21-windows.zip and follow instructions to get the google usb drivers. Search XDA there are several guides, I couldn't find the one I used as of writing this article but there are many out there.
Search google and find a zip with just the ADB drivers.
Download Super One Click Root and use the drivers in the tools directory of the zip. http://forum.xda-developers.com/showthread.php?t=803682
Root Explorer - quick way to move and remount file systems rw with ease. I used v2.13.1. Google around and find an APK to install, just be careful there is another completely differnent package out there called "rooted explorer" it may work but I have not tried it. ** UPDATE ** I attached the version I used to this post
Google Apps for ICS - gapps-ics-20120429-signed.zip is what I used from http://goo.im/gapps/gapps-ics-20120429-signed.zip ** Update ** I replaced the URL with a direct download link from goo.im enjoy!
**NOTE** SUPER ONE CLICK ROOT WILL NOT ROOT YOUR TABLET SO DON'T BOTHER TRYING!
Step 2 install and configure your ADB USB Drivers (Let the fun begin)
Extract your zip file containing the ADB USB drivers or Install the Android SDK and follow instructions on how to use the SDK manager to download the lastest drivers from google.
Once downloaded edit the inf file (usually named android_winusb.inf)
Add the following under the [Google.NTx86] heading and again under the [Google.NTamd64] heading: (one is for 32bit systems and the other is for 64 bit Systems)
Code:
;ProScan plt-7035
%SingleAdbInterface% = USB_Install, USB\VID_2207&PID_0010
%CompositeAdbInterface% = USB_Install, USB\VID_2207&PID_0010&REV_0222&MI_01
After saving and exiting. Turn on USB Debugging on your tablet. It is under Settings => Developer Options and is the first option at the top make sure it has a check in the checkbox. Exit the developer screen by pressing back or the home key and plug in your tablet to a usb port on your computer using a micro-USB cable.
Device detection should at this point detect a few devices but at least 1 will fail without drivers. Possibly more on XP systems..
Under Device Manager => Other Devices you should have a device called "PLT7035-PL" use the usb drivers modifed above to install the ADB USB Drivers.
*** Important Note ***
At this point even with the ADB Driver installed ADB will not see the tablet. We have to create or edit the file c:\users\whatever your username is\.android\adb_usb.ini
If you have already run ADB at any time on your system the file and directory should already exist. If not you will need to create the directory and the file.
on a single line simply add this to a blank line in the file and save and exit:
0x2207
This tells ADB to look for that vendor code. (if you allready have ADB on your computer 'adb devices' should now show your tablet.
** UPDATE ** This is still necessary even if using the drivers attached to this post!​
Click to expand...
Click to collapse
Step 3 Root your Tablet!
*** Warning ***
I almost bricked my tablet on this step due to an error with a faulty PlayStore I had tried to install just using the APK. It kept the tablet from rebooting properly during the root process! I recommend erasing all user data before continuing YOU HAVE BEEN WARNED!
Click to expand...
Click to collapse
Extract Root with Restore by Bin4ry v15 to the directory of your choosing.
From explorer on your pc double click the RunMe.bat and select option one.
This particular root uses the system restore function to gain root access. If everything goes right you should get a prompt on the table to restore an image.
Click to expand...
Click to collapse
Press restore ON THE TABLET without entering a password or changing anything else and after a minute or two (maybe more) it should reboot.. Do some more stuff then reboot one more time and you should now have a rooted tablet.
Step 4 Copy root explorer and gapps-ics-20120429-signed.zip to the internal storage of the tablet.
Make sure the tablet is plugged into your computer and turn On USB Storage.
Copy rootexplorer.apk and gapps-ics-20120429-signed.zip to the Downloads folder via windows explorer and the removeable drive from the tablet.
Step 5 Install root explorer
ON THE TABLET: to applications => explorer => Internal memory => Download => rootexplorer.apk
This should bring up the apk installer and ask for permission to install rootexplorer. Follow the prompts until rootexplorer is installed.
Open root explorer. The first time you open it if everything is right you should get a prompt from SU to allow root access, hit grant. After that you might get a message that you need to close and reopen root explorer again, this is completely normal.
Step 6 Remount File Systems r/w
Once root explorer is open and has root access you should be in the root directory of the device.At the top you should see a message that says "Mounted as r/o" and a button to the right of it that says "mount as r/w".
Click to expand...
Click to collapse
Click the button to mount / as rw.
The message at the top should change to "mounted as r/w" and the button should change to "mount as r/o"
Click to expand...
Click to collapse
Scroll to the system folder and open it.
At the top you should see a message that says "Mounted as r/o" and a button to the right of it that says "mount as r/w".
Click to expand...
Click to collapse
Click the button to mount /system as rw.
The message at the top should change to "mounted as r/w" and the button should change to "mount as r/o"
Click to expand...
Click to collapse
Now click on the ../ Parent Folder icon on the top to go back to the root directory,
Step 7 Extract GAPPS
Scroll to and tap sdcard
Scroll to and tap Download
You should see the google apps file we copied earlier.
Click to expand...
Click to collapse
tap and hold on gapps-ics-20120429-signed.zip until the menu comes up and select "extract all" this will extract the zip file to /sdcard/extracted/gapps-ics-20120429-signed/
Step 8 Copy Google APPS to /system
Scroll to and TAP .. Parent folder at the top to go back a directory to /sdcard/
Scroll to and TAP extracted
Scroll to and TAP gapps-ics-20120429-signed
You should see 5 items, install-optional.sh, META-INF, optional, system and the ../ Parent Folder link.
Click to expand...
Click to collapse
*** WARNING *** Do not click on the install-optional.sh bad things might happen!
Click to expand...
Click to collapse
TAP and hold on the system folder until the menu comes up and select copy.
This will place a paste button on the bottom of the screen be careful not to hit it yet or you will have problems.
Click to expand...
Click to collapse
TAP ../ Parent Folder until the directory at the top says / (you should have to go back 2 or 3 folders)
You should now see a bunch of folders in the root directory as well as the tablets system folder. There should NOT be a ".. Parent folder" visible.
Click to expand...
Click to collapse
Now hit the paste button on the bottom left. You should get a warning massage saying "system already exist. Do you want to overwrite it?" hit yes
The file copy takes 1 to 2 minutes when it is done all that is left is to remount the / and /system folders r/o and reboot the tablet
Click to expand...
Click to collapse
Step 9 Remount file systems r/o
At the top you should see a message that says "Mounted as r/w" and a button to the right of it that says "mount as r/o".
Click to expand...
Click to collapse
Click the button to mount / as ro.
The message at the top should change to "mounted as r/o" and the button should change to "mount as r/w"
Click to expand...
Click to collapse
Scroll to and TAP system
At the top you should see a message that says "Mounted as r/w" and a button to the right of it that says "mount as r/o".
Click to expand...
Click to collapse
Click the button to mount /system as ro.
click the back icon on the bottom left until you have exited root explorer.
Press the power button on the top of the tablet and turn it off and back on.
If everything went right you should now have a fully functioning rooted tablet with Google Playstore...
Click to expand...
Click to collapse
WASN'T THAT FUN!!?!?!

Ive tried this several times. It hasn't worked yet. Maybe I am doing it wrong, not sure. Ill keep trying but I am losing hope.
I am trying with a Proscan PLT7035-PL

worked ... Many thanks to amjtech ...
Here's how to do it:
Install Android SDK, then install Android SDK Tools, Android SDK Platform-Tools, Google USB Driver (download from google)
Install PdaNet for Android on PC.
Attach Proscan pad, check Settings->Developer options->USB debugging to on
XP install adb driver - if unsuccessful, need modify registry
regedit under HKLM/SYSTEM Permissions -> Advance, check replace permission entries on all child
(http://www.tomshardware.com/forum/252428-45-installation-failed-access-denied)
Install USBDeview, run to see usb device attached, get device ID of PROSCAN pad (0x2207)
Add device ID to file adb_usb.ini in c:\docume~1\<user>\.android, also add google's id:
0x2207
0x18d1
(http://forum.xda-developers.com/showthread.php?t=1479311)
(http://androidforums.com/kindle-fir...k-how-get-adb-running-root-superoneclick.html)
Now device will show running
Install ICS Root Unlocker 1.0, run ... got rooted.
Download Root Explorer (2.21.1).apk, Google Play Store (3.8.16).apk, and gapps-ics-20120429-signed.zip from 4shared
http://www.4shared.com/folder/k86VyEKK/_online.html
follow the rest of the instruction (http://forum.xda-developers.com/showthread.php?t=1993013)
... reboot proscan ... voila !!!

Help me!! please!!
I pushed the reset button then right now it's stay at recovery mode ever and I don't what firmware name it's using.. Someone help me find the link to download firmware and teach me how to restore it!! thanks very, very much!!

Factory ROM
tnan0906 said:
I pushed the reset button then right now it's stay at recovery mode ever and I don't what firmware name it's using.. Someone help me find the link to download firmware and teach me how to restore it!! thanks very, very much!!
Click to expand...
Click to collapse
Unfortunately as stated above there is no factory rom available for these tablets yet... I am looking into using rkflash or rkflashtool to download my rom prerooted so I have a backup and also can post a rooted rom for everyone. Most likely later this week I should have some time to figure out the rkflashtool and get it dumped.
I will post it here once it is done.
I'm going to say this now. I have a very busy schedule so I cannot guarantee when I will get this accomplished.
Also if this works for you please hit the thanks button.

Stuck
Humphrey1989 said:
Ive tried this several times. It hasn't worked yet. Maybe I am doing it wrong, not sure. Ill keep trying but I am losing hope.
I am trying with a Proscan PLT7035-PL
Click to expand...
Click to collapse
How far are you getting? Were you able to get root?

Rom Backup
amjtech said:
Unfortunately as stated above there is no factory rom available for these tablets yet... I am looking into using rkflash or rkflashtool to download my rom prerooted so I have a backup and also can post a rooted rom for everyone. Most likely later this week I should have some time to figure out the rkflashtool and get it dumped.
I will post it here once it is done.
I'm going to say this now. I have a very busy schedule so I cannot guarantee when I will get this accomplished.
Also if this works for you please hit the thanks button.
Click to expand...
Click to collapse
Thanks thanks thanks!! Please upload your backup from you for me! I think it will work because same products!! please as soon as possible!! Thanks you, thanks you very very much!!!

Confused as heck !!
OK, I am confused as heck here. I have the SDK installed. I have the USB Drivers installed. The PC sees the phone just fine, I can browse the internal storage and the external sd card with no problem. Windows XP Device Manager shows Android Phone, and under that the Android Composite ADB Interface.
PDANet works with the phone, no problem. However, adb devices never shows the device, and the Root program cannot find it either. At this point, I'm stumped. Any ideas what I need to do? I have put the android_usb.ini file in c:\Documents and Settings\myusername\Android with the necessary hex codes for the device and for Google. I'm going nuts here!
I know ADB is installed properly, because I can plug my phone into the PC and run adb devices, and it's detected just fine. It's just this tablet it can't find.
FIX: Not as obvious as it might have been, but here is the solution to my problem. I used the Search function to find the adb_usb.inf file - umm... it's in .android, not android. Once I added those ids, everything was fine.

No Market?
Achieved root, copied over the system folder from the zip, but no market. Did I miss something?

What about Recovery?
Just wondering if there is a recovery option as yet? That would be so helpful!
---------- Post added at 08:13 AM ---------- Previous post was at 07:28 AM ----------
spycom773469 said:
Achieved root, copied over the system folder from the zip, but no market. Did I miss something?
Click to expand...
Click to collapse
Yeah, this happened to me too. And for some reason, when you go to the \system folder and look in apps there is another apps folder in there. I think there is something really odd going on with root manager possibly. I don't know what the deal is, but none of the Google Apps are running.
I've tried several older 4.0.x versions of GAPPS, and I will be danged if I can get any of them to work. I'm rooted OK, but that's all that worked thus far.

Good instructions! But failure... and then success
The instructions were great above! The pointer to the version of google play was bad, but I found this link http://forum.xda-developers.com/showthread.php?t=1934441 and after using Root explorer to do the appropriate permissions at / and /system, and on the renamed file, it works!
---------- Post added at 06:17 AM ---------- Previous post was at 06:06 AM ----------
Now that I got Google Play to work...
I am having an odd problem however - the installation of apps stalls at 0% for about 30 seconds, and then continues. And as the percentage is updated, I see app screens cycling. And little google play shopping bags start to stack up in my "task tray" area of the tablet.
Does anybody else have that problem? It's very annoying! It seems like the downloaded apps not only install but open, eating up precious memory.
Speaking of which, how is the flash memory used? (4 GB), and not having apps take up the 500 MB that's available?

jmasters said:
Speaking of which, how is the flash memory used? (4 GB), and not having apps take up the 500 MB that's available?
Click to expand...
Click to collapse
It is 4GB shared. I haven't tried looking at the partition table.
There is only 2GB usable, it's on the TF card, I moved the apps there.
Not sure how to access the SD card to put apps there.
netizenmt said:
Yeah, this happened to me too. And for some reason, when you go to the \system folder and look in apps there is another apps folder in there. I think there is something really odd going on with root manager possibly. I don't know what the deal is, but none of the Google Apps are running.
I've tried several older 4.0.x versions of GAPPS, and I will be danged if I can get any of them to work. I'm rooted OK, but that's all that worked thus far.
Click to expand...
Click to collapse
My GAPPS are working fine. I thought about killing that /system/system folder and manually placing the files via adb.
Try checking the permissions too, I think they need to be 644 or better.
I've put the Tablet away for now, I will tinker again later probably.
Sent from my DIRTY Jelly Bean EVO 3D

How to move apps internally to TF card?
spycom773469 said:
It is 4GB shared. I haven't tried looking at the partition table.
There is only 2GB usable, it's on the TF card, I moved the apps there.
Not sure how to access the SD card to put apps there.
How do you move your apps there? I'm aware of the app called something like app2SD, but the TF card isn't an SD card.
Click to expand...
Click to collapse

jmasters said:
spycom773469 said:
How do you move your apps there? I'm aware of the app called something like app2SD, but the TF card isn't an SD card.
Click to expand...
Click to collapse
If you go to the Apps tab under the system settings you will see a button that says "Move to TF Card"
Sent from my DIRTY Jelly Bean EVO 3D
Click to expand...
Click to collapse

netizenmt said:
Just wondering if there is a recovery option as yet? That would be so helpful!
---------- Post added at 08:13 AM ---------- Previous post was at 07:28 AM ----------
Yeah, this happened to me too. And for some reason, when you go to the \system folder and look in apps there is another apps folder in there. I think there is something really odd going on with root manager possibly. I don't know what the deal is, but none of the Google Apps are running.
I've tried several older 4.0.x versions of GAPPS, and I will be danged if I can get any of them to work. I'm rooted OK, but that's all that worked thus far.
Click to expand...
Click to collapse
You have to extract the zip file, remount the file systems as rw and copy the /system folder from the zip into the / of the device so that all the files goto their proper places... if you have /system/system it was not copied correctly...
as far as those not getting ADB to reconize the tablet.. a) make sure you have usb debugging turned on and b) you put the hardware id in the adb_usb.ini file.. See the ** important note ** in Step 2!

Unzipping Files
I have read and followed your directions to download the files, but, my unit keeps saying it can not open any zip files.
Do you have any idea why it may say this or how to get around this problem so I can continue as instructed?

unzip on your computer and transfer over, or use root explorer
bluetxsteel said:
I have read and followed your directions to download the files, but, my unit keeps saying it can not open any zip files.
Do you have any idea why it may say this or how to get around this problem so I can continue as instructed?
Click to expand...
Click to collapse
You can unzip them on your computer and then transfer them over, or use root explorer on your tablet. You'll have to hold your finger on the .zip file for a few seconds and then the unzip option pops up.

Well, everyone be careful! When my Google Play would not install properly, I tried to clean the tablet up, ie, put it back to its original condition. Somehow, I managed to cause something to crash, and from then on, the tablet won't boot past the Android startup screen, although I can adb into it and it is still rooted, etc. What I've got now is a project tablet - HOW TO UNBRICK THE BRICK.

my bricked too
netizenmt said:
Well, everyone be careful! When my Google Play would not install properly, I tried to clean the tablet up, ie, put it back to its original condition. Somehow, I managed to cause something to crash, and from then on, the tablet won't boot past the Android startup screen, although I can adb into it and it is still rooted, etc. What I've got now is a project tablet - HOW TO UNBRICK THE BRICK.
Click to expand...
Click to collapse
I hope you do so or some body find a way to unbrick this thing as for me i still have 26 days to return mine.i got to the part where I was about to paste the system I hit yes then everything locked up. I noticed before I hit yes it said do you want to merge and copy the files over not do you want to overwrite it but I still hit yes bad idea. can anybody tell me why I said merge and copy. well this is the second one I have bricks follow the steps perfect got all the way to the end and this is what happens so I took the first 1 back guess I'm going to take a second back also and try again until i figure out what I'm doing wrong.has anybody maked a rkimage or a .zip. update that will work to re cover this thing. I would be willing to try it out for you because I can.

netizenmt said:
Well, everyone be careful! When my Google Play would not install properly, I tried to clean the tablet up, ie, put it back to its original condition. Somehow, I managed to cause something to crash, and from then on, the tablet won't boot past the Android startup screen, although I can adb into it and it is still rooted, etc. What I've got now is a project tablet - HOW TO UNBRICK THE BRICK.
Click to expand...
Click to collapse
try doing an ADB shell
then the following commands
su
wipe data
this will reset the user partition. I had something similar happen on mine.. BTW 'wipe all' will definitly brick your tablet so be carefull
If you still cannot get it I was almost in a car accident yesterday and my tablet went flying and broke the screen... If you confident with a soldering iron I now have a plt-7035 mainboard prerooted and playstore installed for sale for $25 including shipping.. it would involve soldering 6 wire and the wifi antenna if your up to it pm me,, I know its good as I was able to ADB into it and run su and wipe data to reset it..
-Andrew

[Q] At the end of my rope.

Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.

TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
Ok, Can you boot to Odin mode (dowload mode)?

TwistedPoet said:
Hello everyone, I am in need of serious help. I have the Verizon Galaxy S3 4.3 and I have hardbricked the device. The phone is completely unresponsive.
I will attempt to give all the details of how I came to this without boring everyone to death with inane facts. So here goes; I first rooted the phone around November. Used Odin, had ClockworkMod installed and even managed to teach myself (with the help of folks like you all here), how to circumvent Verizon's pesky bootloaders (both unlocked and then relocked). Everything was running smoothly until I had left my phone unattended and plugged into my computer. The Verizon updater forced 4.3 on me leaving me scrambling to figure out to to regain root access. I did manage to gain the root access (although, I'm not 100% sure how so) and once again, everything was fine.
I began using TitaniumBackup to starting removing some bloatware and moving system apps to the SD card. I decided that I had no use for the "Samsung Link" app and I removed it. Once I returned from the reboot, I noticed that the icon for the bootloader was on the screen indicating that it was unlocked. I the did a quick search and app file for the "EZ Unlock" app. I installed the file, ran the program, did and reset and DEAD. Nothing. I've sat at the PC for the better part of the last 24 hours, have read hundreds of posts and tried more methods than I care to count. So far nothing has worked.
I'm desperately hoping that I will be able to find my answers by reaching out to the community as I have no funds to send my phone anywhere and I am past the warranty period. You guys are probably my last hope. Thanks in advance to anyone who helps out. It means a lot.
Click to expand...
Click to collapse
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.

buhohitr said:
Ok, Can you boot to Odin mode (dowload mode)?
Click to expand...
Click to collapse
No. Once I used EZ Unlock, I was bricked.

SlimSnoopOS said:
I doubt you'll bore us here, after all we dwell in the minutiae and tiniest of details for fun. Hmm, from what I see you have a bootloader hard brick since you tried using EZ Unlock. TW 4.3 prevents downgrading the rom to pre-4.3, flashing an unlocked bootloader, and installing a custom recovery using 4.1.2 methods. Your best option will be to try the steps detailed in this bootloader/hardbrick thread by SpyroDazee.
Click to expand...
Click to collapse
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.

I also have bricked S3 different circumstances but still hard bricked. Nothing I've tried here on xda or anywhere else has worked. I'm going to try this http://www.ebay.com/itm/281217379767?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 . It is probably the cheapest and easiest way.

TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img. http://angelfirenetworks.servegame.com/XDA/S3 Debrick IMG_s/
And then I can seem to make that run either.
Click to expand...
Click to collapse
It usually takes a few tries to get it to work, but if you really can't then you can always send it in for a jtag repair.
Mobile tech videos will do it, and there's someone on eBay who will do it for $30. Not too expensive.
Sent from my SCH-I535 using Tapatalk 2

TwistedPoet said:
I've looked at this particular guide the most. Where I fail there is the post calls to use Win32diskimager with the unzipped debrick.bin. I cant get Win32 to recognize the file and get error code 5: need permission (or something like that) and I run the program in Admin mode.
The only file I've found so far that Win32 does actually write to my SD card is Debrick-i535.img.
And then I can seem to make that run either.
Click to expand...
Click to collapse
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.

SlimSnoopOS said:
So I just downloaded the debrick.zip and Win32 program from my link onto my laptop. I saved the unzipped debrick folder onto my desktop and found the debrick.bin once I switched the "Files of type" to "." then I just wrote the debrick.bin to a 512 mb sdcard with no problems. I'm not going any further cuz I have no need for this though. Are you saying that Win32 doesn't find the bin file at all?
Edit: I just ran it again and it worked a second time. My backup laptop is a 2006ish (maybe older) with a very outdated version of Windows and my sdcard has been unused since 2008. I don't know what else to tell you but it worked surprisingly well for me.
Click to expand...
Click to collapse
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Follow Up: I figured out what I was doing wrong. I was attempting to pull the "bin" file through Win32 and should have been pulling the "zip" file instead. I was able to write the debrick.zip file onto my SD card but wasn't (on first attempt) able to load my phone. Are there any other steps I may have misunderstood or overlooked?

TwistedPoet said:
The Win32 program finds the debrick.bin file when I switch to "." as well. But when I click WRITE, I get an error message and the file doesnt't write to the sd card. I'm using a HP Windows 7 Pro (2009) and I have a 32gb, class 10 sd card. I will run it again to double check.
Click to expand...
Click to collapse
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.

SlimSnoopOS said:
Have you tried formatting the sdcard and running the program again? Set it to Fat32. I'm thinking it may be the sdcard and not the program itself but I'm not certain.
Click to expand...
Click to collapse
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).

TwistedPoet said:
VICTORY!!!!!!! - I made several mistakes in getting to this point but i have successfully retrieved my phone from it's previous HardBrick status. The steps it took me to get to this point were, make sure the sd card is formatted (FAT32) and empty, unzip the debrick.zip file, run the Win32 program, select the unzipped debrick.bin file and upload it to the F drive, then click Write. So, more or less, exactly what the instructions told me to do. Sometimes, it's the simple things that we're most often missing or not understanding.
THANK YOU to everyone and especially SlimSnoopOS for talking me through it and SpyroDazee for making such a comprehensive guide to work with. (although, it's simplicity was too complex for me. ).
Click to expand...
Click to collapse
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4

SlimSnoopOS said:
Haha I love the enthusiasm my friend! Great way to start the weekend! All it took was another perspective, it's all good. You are most definitely welcome.
Edit: and while I'm here, if you have any inquiries about TW 4.3 or want to read up on some info then here's our TW 4.3 discussion thread:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I'm not turning away knowledge. I'm still very new to this and obviously have a hard time following directions. I was looking at the next steps on that guide and am all ready confused enough to not do anything yet.

What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip

Always_Jonezen said:
What is your phone doing after you inserted your sdcard and what size card and class were they. If you got it to go into download mode or some call it Odin mode by pressing volume down, home button and power button then your off to a great start to bringing your phone back from the dead. If only it worked for mine
Where did you get the debrick.zip file? Every time I download the file it comes as debrick.img not a .zip
Click to expand...
Click to collapse
Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly, I put the SD card back into the phone, put the battery in, and plugged phone into computer. Pushed the power button and the phone came back on.
When you go to download that file with Win32, change the file type to "." - then you'll be able to select the debrick.zip
All files were obtained here - http://forum.xda-developers.com/showthread.php?t=2581166
I hope that helps.

TwistedPoet;49543890. Edit: My SD Card is a 32gb class 10. Once I got Win32 to extract the file properly said:
http://forum.xda-developers.com/showthread.php?t=2581166[/url]
I hope that helps.
Click to expand...
Click to collapse
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32

Always_Jonezen said:
Thanks I hope it works too. Am I supposed to change the file type of the debrick.img to debrick. and or change the file type in win32
Click to expand...
Click to collapse
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4

SlimSnoopOS said:
They did exactly what I posted, which was: unzip the debrick.zip, open Win32 and change the file type to ".", find the unzipped debrick folder and select the debrick.bin, and write to the sdcard.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something

Always_Jonezen said:
As stated earlier when I download the debrick file it downloads as debrick.img not a zip file am I missing something
Click to expand...
Click to collapse
Did you brick BEFORE 4.3? I hovered over this link in SpyroDazee's post: "Debrick if you bricked before 4.3 OTA" and that's the only one that would download as an IMG. Press "Debrick if you took the 4.3 OTA" and it will download as a zip.
Or change the browser that you're using. I downloaded it using Chrome on my MBP.
Sent from my SCH-I535 using Tapatalk 4

I did brick on 4.1.2 and I am using chrome as my default browser

Bought on Craigslist, Factory reset it, Many default apps are gone, Lots of issues?

Hey Guys,
Brand new to XDA and new to messing with my phone in anyway, I looked through some threads, but am not sure if I can mess something up worse by not following the right steps,
I basically bought a used phone on craigslist, AT&T LG G FLEX 2 - LG-H950 and when I factory reset it, many of the default apps are not installed, cannot use my calendar and the phone is just a little off all together.
Not sure if the phone is still rooted or if the factory reset cleared it, and I am all together worried that the only reason the kid sold it to me was because he messed it up and couldn't fix it and just pawned it off to my dumas
I know its frowned upon to start new threads when the answers are out there, but i need this for work ASAP and if I screw it up and cant use it all Ill have to go back to my work iPhone (last resort, i hate it)
I started to follow hyelton's video http://forum.xda-developers.com/showthread.php?t=2785089
but got cold feet when i couldnt find my exact model the h950
It is currently on the android 5.0.1 and when i tried the update before i reset it, it said i couldn't update it something about the root. So i reset it and everything is the same as when I bought it on CraigList.
How do I get it back to square one, like it came in the box. I am interested in learning how to root and be in control of my own property, but I just want to get back to the start safely without bricking it so I can follow the forums and not feel so helpless.
im sorry if the first response to this just point me to another thread, but I will appreciate even that much guidance so at least i know i am headed in the right direction
Thanks a lot xda community
Branden

Factory reset won't remove root BTW. Recent Android phones seem to perform an integrity check prior to updating that fails when root is present.
http://forum.xda-developers.com/showthread.php?t=3171550
Just read that to get the phone back to stock, then you'll be able to upgrade to 11x (5.1.1) and eventually 11z.
Sent from my LG-H950

cool, thanks, one more question
I made an account with MEGA
downloaded the Flex2Tool 1.4.1 and unzipped
downloaded the system.img.gz
Started watching your video. however i am not bricked.
it has missing default apps and it says this device is suspected in rooting, software update is not available for rooted device.
so what is my first step after downloading these files. do i connect phone to my computer and open up the flex2tool and
select variant 1 which is H950 v10d etc
then do I select 1 , ( i do not need anything on the phone.)
or move straight to variant 2. restore unroot stock system.
if i do that next where do I put the system.img.gz file on my phone. anywhere in the internal memory and before or after I reset it?
sorry for all the questions and thanks for all the help. i am very new to doing anything besides calling or texting on my phone
Branden

koronab said:
I made an account with MEGA
downloaded the Flex2Tool 1.4.1 and unzipped
downloaded the system.img.gz
Started watching your video. however i am not bricked.
it has missing default apps and it says this device is suspected in rooting, software update is not available for rooted device.
so what is my first step after downloading these files. do i connect phone to my computer and open up the flex2tool and
select variant 1 which is H950 v10d etc
then do I select 1 , ( i do not need anything on the phone.)
or move straight to variant 2. restore unroot stock system.
if i do that next where do I put the system.img.gz file on my phone. anywhere in the internal memory and before or after I reset it?
sorry for all the questions and thanks for all the help. i am very new to doing anything besides calling or texting on my phone
Branden
Click to expand...
Click to collapse
1. You first need the LG USB drivers for the Flex to be installed
2. The system image file (gz) will have a .img file inside that's about 4GB, so unzip the one you downloaded with 7zip, preferably from a PC. Put the .img file on the root of the phone's internal memory before proceeding. You'll also want USB debugging enable and disable the verify over USB option
3. Once file is on phone you can continue with the tool, it will eventually go into download mode & show ## when finished
Sent from my LG-H950

okay i did that but
I dont understand your last thing >>>>"You'll also want USB debugging enable and disable the verify over USB option"
when i have my usb connected the phone gives three options
1.Charge Phone
via usb
2.Media Sync (MTP)
3.Send images (PTP)
When restarting the recovery tool after img. has been installed to root of internal storage. do i just start program or do i need to turn off phone or reset it or just run it with the MTP

koronab said:
I dont understand your last thing >>>>"You'll also want USB debugging enable and disable the verify over USB option"
when i have my usb connected the phone gives three options
1.Charge Phone
via usb
2.Media Sync (MTP)
3.Send images (PTP)
When restarting the recovery tool after img. has been installed to root of internal storage. do i just start program or do i need to turn off phone or reset it or just run it with the MTP
Click to expand...
Click to collapse
http://i.imgur.com/ynGFv1j.jpg
Like that. Check that the USB debugging icon shows in the notification area while USB is connected as MTP. Then you can start the tool. Be sure that the .img is present on the root(sdcard0) prior to letting the tool reboot the phone.
Sent from my LG-H950

i dont see developer options
under system there is
shorcut key
date and time
accessibility
quick circle case
printing
about phone

figured it out, thanks
got it

firmware update
I am on a screen that says
FIRMWARE UPDATE
sync symbol with usb symbol
don not unplug the USB connection until the process is complete
status bar has read 0%
then there is box and in it says USER B99
the black window on my pc has the "##" and says that i can disconnect the USB cable
should i do this now or wait till something happens in the status bar on the phone

nevermind, phone stared back up
Thanks ACE I appreciate it

koronab said:
Thanks ACE I appreciate it
Click to expand...
Click to collapse
Did you remove the USB cord, then re insert after ##? The tool will reboot for you, and are you back into the OS now?
Sent from my LG-H950

yes it worked do i factory reset it now to get all the default apps working again

koronab said:
yes it worked do i factory reset it now to get all the default apps working again
Click to expand...
Click to collapse
Probably a good idea. I think the previous owner was trying to delete some of the bloatware and didn't properly restore the phone before selling it, not sure if that was done purposely or not.
Sent from my LG-H950

okay, i reset it but still dont have default apps
the default apps for the calendar which was my original issue still is not there, just a generic Android icon. because there is no default it will not allow me to sync calendars, also no default messaging app.
not sure if this just put me back to 5.0.1 which is where already was but i am still missing default apps to make the phone run smoothly,
any ideas on what i may have done wrong

koronab said:
the default apps for the calendar which was my original issue still is not there, just a generic Android icon. because there is no default it will not allow me to sync calendars, also no default messaging app.
not sure if this just put me back to 5.0.1 which is where already was but i am still missing default apps to make the phone run smoothly,
any ideas on what i may have done wrong
Click to expand...
Click to collapse
In settings -> apps -> disabled is calendar listed?
Sent from my LG-H950

7zip
i believe what is happeneing is the img file is not unzipping. i had originally just copied the img.gz file over witout unzipping it. now i am trying to unzip it but no success
do i unzip before or after i copy to root storage

koronab said:
i believe what is happeneing is the img file is not unzipping. i had originally just copied the img.gz file over witout unzipping it. now i am trying to unzip it but no success
do i unzip before or after i copy to root storage
Click to expand...
Click to collapse
Dude , you are new in Android? XD
Yes you need to unzip that file before run the tool
Sent from my Redmi Note 2

Super noob
Looks like it came unzipped when I downloaded from Mega. Icon is a blank paper folded too right corner and reads system.img.gz and 1.6 gb which is what I copied to the root storage and then followed everything else and did it again starting from scratch and still have generic icon without the default apps like calendar, browser, and messaging. I'm trying tho. Been reading forums since last night with no luck
I do appreciate everyone's help tho,
And ace there is no calendar under apps

koronab said:
Looks like it came unzipped when I downloaded from Mega. Icon is a blank paper folded too right corner and reads system.img.gz and 1.6 gb which is what I copied to the root storage and then followed everything else and did it again starting from scratch and still have generic icon without the default apps like calendar, browser, and messaging. I'm trying tho. Been reading forums since last night with no luck
I do appreciate everyone's help tho,
And ace there is no calendar under apps
Click to expand...
Click to collapse
You need to unzip that file
.gz like .rar or .zip are different types of compression, so download the latest version of winrar or use 7zip, you need the system.img file (4gb)
Sent from my Redmi Note 2

THANKS
Sj12345 said:
You need to unzip that file
.gz like .rar or .zip are different types of compression, so download the latest version of winrar or use 7zip, you need the system.img file (4gb)
Sent from my Redmi Note 2
Click to expand...
Click to collapse
finally did it. Thanks alot you and ace were a life saver