Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
I ran the Hard-SPL on my HTC and it worked as it should. I'd say give that a shot, THEN try flashing the ROM of your choice.
-Mc
Problem is, when I run hard spl it expects activesync to be running, but in bootloader mode AS doesnt connect so Hardspl wont load =/
- Disable activesync usb connections
- Connect to bootloader with mtty and type the following commands to know your CID and Model ID:
Code:
Cmd>task 32
Cmd>info 2
Cmd>getdevinfo
Paste the output here, and also tell me which SPL version you have on your device.
Also, does the tri-color shows "RUURUN" or similar in the screen?
You should flash a ROM matching your CID to fix it.
Cmd>task 32
No card inserted
Level = FF
Cmd>info 2
HTCSCWS__001Ùü¤HHTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1*00CS_0HTCE
Cmd>
Device screen says
RUUNBH
KAIS1*0
SPL-1.56.0000
CPLD-8
Flash this ROM, should bring it back to life.
I'm leeching it now, 40% done, also FYI, I've posted on the Official ROM forum new links to most utilities and ROMs hosted on my servers off the rapidshare, to share free of charge.
Ahh, life saver =) Thanks, I'll be sure to add that rom to my list of full Kraiser roms on my web server, now to correctly flash it back with the HTC rom.
Thanks!
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Lukstra said:
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
Click to expand...
Click to collapse
ludovich said:
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
Click to expand...
Click to collapse
Run the Hard-SPL utility on your PC, and follow the instructions (sticky on this forum)
It will allow you to flash any ROM after that, I've flashed the AT&T Rom, the HTC rom and back and forth, pulling cabs out of the AT&T rom for the items I like (IM utility etc)
Palmore said:
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
Click to expand...
Click to collapse
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
andydempsey said:
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
Click to expand...
Click to collapse
LIFE SAFVER
nispen said:
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Click to expand...
Click to collapse
Hi Wouter,
I bought a new Kaiser today (yes now I have two of them ).
I will see if I can dump the Dutch ROM myself and see what happens next.
Thanks for your help anywhy!
- Lucas
Bricked
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Vista Problem.
First off, i had the same problem as you so i just found an XP box to use.
Second, even with XP i still managed to **** up because i did not read the directions all the way through. This device is totally different so make sure you read all the directions.
If you have no access to an XP machine then u can just "obtain" a copy of XP and dual boot just for flashing your device.
If you have no idea what I am saying then read some more. the hermes forums have some great information when it comes to flashing via Vista.
For all you guys that just saved between $300.00-$500.00. How about sending POF like %5 or %10 of what he just saved you...
I'm just sayin'
Later, Lew
Have you installed the XP activesync drivers under Vista? The Hermes Wiki mentions somewhere how to do that.
Jabbs19 said:
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Click to expand...
Click to collapse
Best Forum Ever
I
I got it working. I had to pull the battery out of the phone to get it out of bootloadr, it was just plain stuck. Then, in Vista, I needed to F8, disable driver enforcement, I replaced the wceusbh.inf in device manager, and relaunched HardSPL and there she was! Now for the BigStorage.
Thanks to all that helped, I will be donating pof for sure
My friend was playing around with my Imate Kjam and did the software up date and installed some security update. Now my phone locks up and say device authentication failure. I know I need to reinstall again but I can't get pass that device authentication failure, and without getting pass that my pc wont see my phone to allow me to install a new rom. Did a hard reset already and thought maybe that would get me by, but no stuck at the same screen again. Hope someone can help me get pass this and upgrade to a new rom.
Many Thanks,
Joker
Get to boot loader mode (4 color screen) and flash as usual.
AS will will not "pop-up" but if you look in the lower left of your device you will see USB meaning the drivers a communicating.
Thanks for the reply . When I try and run the enter bootloader it comes up with an error message. can I get into the bootloader any other way.
ok I', able to get into bootloader but when I run the rom is errors out saying can't find device. Any idea I'm trying to do this from a vista pc.
cant do it in a vista pc. get a XP or below.
ok, so i lost usb connection during the upgrade process I have a boot loader but it won't pick with the update exe.
ok so I was able to find the recovery tool and run that but it stops loading? it doesn't allow me to get to the device setup or setup this device.
i fixed it. please delete thread.
Hello all. I have followed the instructions to get wm6 and got stuck on step 9 of Karhoe's guide. Activesync will no longer see my device. so i cannot move forward. my phone is stuck on bootloader screen. After 'resetting device' in terapro. i saw the splash screen on my device then it went immediately to the bootloader color bars. everything else showed exactly what was on Karhoe pics. i just need activesync to see my device so i can proceed. any suggestions please. Thank you very much.
Activesyn will not see your device as it has been wiped clean of windows. Since you will need to be in booloader screen to install wm6, it doesn't matter if your activesyn sees your phone or not.
I ran into the same issue, i had to actually disable the 'allow usb...' option in activesyn so the romupdater utility can see the phone. So try it both ways.
enable it as suggested and just run the next step of installing the wm6gsmupdate...if you get some message saying connection error, then disable it and try again.
no activesync. Error [264]: Connection
thanks for the reply flashhsalf. it has not worked out for me tho. i tried both ways several times. enable/disable usb. i get same ERROR [264]: Connection.
im going to try it with a different laptop.thanks again.
Once I have this error too. Just reboot my PC and format BINFS one more time and all became fine. Don't know that is the reason, but this trick was helpfull
Have You re-enabled "Allow USB connection" @ connection options in Your Activesync??
got it to work...!!!
thanks all. i tried what was suggested all day...then when i went home i tried again with no success. to the point where my battery just died. i thought it was a paper weight at that point. but i decided to plug into the charger and the bootloader came up again. this time without the USB indication in the lower left corner. after a 2hr charge i took it to the same laptop which i rebooted. enabled usb then it worked! strange but glad i got it to work. Thanks again folks!
i updated to 6.1 but im experiencing issues with internet. ERROR
the remote party has ended this connection. this is the case with MMS as well. anyone experience this?
xdabe said:
Hello all. I have followed the instructions to get wm6 and got stuck on step 9 of Karhoe's guide. Activesync will no longer see my device. so i cannot move forward. my phone is stuck on bootloader screen. After 'resetting device' in terapro. i saw the splash screen on my device then it went immediately to the bootloader color bars. everything else showed exactly what was on Karhoe pics. i just need activesync to see my device so i can proceed. any suggestions please. Thank you very much.
Click to expand...
Click to collapse
i am also stuck to the same point ..
please help me what to do , why does this happens ..
i am very nervous ...as i cant make it a paperweight...
please help ..
thanks
my device is IMATE SP5M
and i have correctly done steps upto 8...
and when i try to do step 9 i only get three color boot loader screen
my device is super CID
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x7820000 Bytes
HTCSSuperCID ' HTCE
Xdabe if you actualise Radio ROM, before upgrading to WM6.1 you wouldn't notice that problem with an Internet.
Try upgrading Radio ROM for your device.
Gsmsikar once you are in bootloader, and have SuperCID, just start installing Radio ROM first, then OS.
Jinx011706 wrote:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I am getting this error message when I am trying to Flash an Android update to my HD2. There is a bootloader that I am using made by Cotulla. I shut down the phone, boot it up into the loader, select Flash USB, connect to computer, it connects to the phone but when I run DFT as admin, it does not find the USB connection and gives me the following error message above.
Is there another way for me to Flash a ROM to my phone or am I missing something. I am using Android only, Windows is no longer on my HD2. Running Rom Build NexusHD2-Froyo V1.9a NAND. Trying to update.
Thanks for any help with the matter.....and sorry if I posted in the wrong place.
Micki