ok, so i lost usb connection during the upgrade process I have a boot loader but it won't pick with the update exe.
ok so I was able to find the recovery tool and run that but it stops loading? it doesn't allow me to get to the device setup or setup this device.
i fixed it. please delete thread.
Related
My friend was playing around with my Imate Kjam and did the software up date and installed some security update. Now my phone locks up and say device authentication failure. I know I need to reinstall again but I can't get pass that device authentication failure, and without getting pass that my pc wont see my phone to allow me to install a new rom. Did a hard reset already and thought maybe that would get me by, but no stuck at the same screen again. Hope someone can help me get pass this and upgrade to a new rom.
Many Thanks,
Joker
Get to boot loader mode (4 color screen) and flash as usual.
AS will will not "pop-up" but if you look in the lower left of your device you will see USB meaning the drivers a communicating.
Thanks for the reply . When I try and run the enter bootloader it comes up with an error message. can I get into the bootloader any other way.
ok I', able to get into bootloader but when I run the rom is errors out saying can't find device. Any idea I'm trying to do this from a vista pc.
cant do it in a vista pc. get a XP or below.
First i want to apollogize for my bad english, it's only what i've learned at school.
So here's my problem: Today I got my new prophet. I wanted WM6 on it, so I tried to Update. I followed this guide: http://forum.xda-developers.com/showthread.php?t=350033
When I clicked on Hardspl.bat to install hardspl. First there everything was right. after some time an update window appeared. I continued up to the part where the wizard tells from which version to which version the phone will be updated. There was a empty field at both, so I think the wizard didn't rekognize the phone or the System version. I cancelled and disconnected the phone. Then I connected it again and updated it manually by clicking on the file ROMUpdateUtility_NV_G4.exe which was in the same folder as the coffie rom i downloaded. Everything was allricght and the wizard tells that the update was succesfully. But after disconnecting the phone It didnt start. It shows the O2 logo. then there is a colorful scrren with the spl and ipl version. there it hangs. I can't connect via Active Sync. It says "not connected". is there anyone who can help me?
@dit: OK, its back alive, Sorry for the unnecessary Posting.
tXX
try download and flash with this rom http://www.mrpalm.com/dopod818pro_rom.zip
If the ROM version does not appear when using the utility wizard you have NOT completed the HardSPL process. When you HardSPL the screen will turn white and the USB will disconnect. Unplug and reconnect the USB and then follow through with the wizard steps. Make sure you new SPL ver. upon boot-up is actually changed before you proceed to the actual ROM upgrade. Took me a while to figure out. Good Luck!
tXX said:
First i want to apollogize for my bad english, it's only what i've learned at school.
So here's my problem: Today I got my new prophet. I wanted WM6 on it, so I tried to Update. I followed this guide: http://forum.xda-developers.com/showthread.php?t=350033
When I clicked on Hardspl.bat to install hardspl. First there everything was right. after some time an update window appeared. I continued up to the part where the wizard tells from which version to which version the phone will be updated. There was a empty field at both, so I think the wizard didn't rekognize the phone or the System version. I cancelled and disconnected the phone. Then I connected it again and updated it manually by clicking on the file ROMUpdateUtility_NV_G4.exe which was in the same folder as the coffie rom i downloaded. Everything was allricght and the wizard tells that the update was succesfully. But after disconnecting the phone It didnt start. It shows the O2 logo. then there is a colorful scrren with the spl and ipl version. there it hangs. I can't connect via Active Sync. It says "not connected". is there anyone who can help me?
@dit: OK, its back alive, Sorry for the unnecessary Posting.
tXX
Click to expand...
Click to collapse
open and read at http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet hopefully can help u, if usb cannot detect to PC, remove your battery arround 1 minutes then plug again.. try it..
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
I have similar problem, can't connect to PC anymore, but flashing with SD card works for me
have you tried different ROM images?
TQY said:
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
Click to expand...
Click to collapse
It sounds like you did not carefully read this.
That is also where this should have been posted. A new thread should not be started for this type of issue. I understand you are panicing. However, in almost all situations the phone can be recovered.
That said, Hold volume down and hit the reset button. It will put you in the tricolor screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom.
be sure that battery over 50% then follow arupphental's
I have a friend with a kaiser and the same problem. can this be applied to it? i dont want to search through the forum forever...
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
X2D said:
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
Click to expand...
Click to collapse
ok i thought someone would say that. was just wondering off hand. thanks x2d
A.creature said:
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
Click to expand...
Click to collapse
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
I had the same problem after a faulty ROM from Vodafone NL, what I had to do is before I wanted to flash my ROM do a hard reset on my device (please back-up your personal data before doing this). After the hard reset, I could get a stable connection with activesync and flash my ROM
While the circumstances are different, my advice is still the same: http://forum.xda-developers.com/showthread.php?t=481527
longnguyen30 said:
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
Click to expand...
Click to collapse
Stumbled upon this.. and yes the advise is good, when you run the flashing utility (i.e. CustomRUU.exe), it says you need an Active Sync connection, but you really dont, you can flash it anyway, it seems to find the device via USB regardless.
ufff!!!! to me yes found right, thank you thank you to first post. (flashing from SD)
Undetected
Well i had the problem where my phone wasnt getting detected at all.... i put the stock rom and radio but couldnt put stock spl on the phone with sdcard.... after trying different computers/usb wires/settings i returned it for a new one and this one works fine.
I finally got connect between my HTC Touch Pro and OSX (parallels + Activesync)
I am trying to run RaphaelHardSPL-Unsigned_190_1_3 and everything goes well, but when it trys to connect to the device to start the mod, i get Error [202] Connection. I have tried enabling/disabling Advaned Network Funtionality in Connection settings, but that did not help. I have tried manually going into bootloader (when the transfer is about to start, I hold VolDown, and reset, and wait for Bootloader to go into USB mode). That didn't work for me.
My question(s) are, how can I get the HardSPL running, or how can I get my deviced flashed in general (SD method didn't work)
AND: My version in HARDSPL is stated to be 1.95.502.5. Is it OK if I downgrade to 1.90.1.3 in order to allow custom ROMs?
Thanks in advance.
Parallels doesn't play nice with the USB bridge.
Try boot-camp (works for me).
I crashed my first Kaiser, flashing with Parallels. Couldn't recover it after the usb connection cut out mid flash. I sent it in for warranty exchange, telling them it crashed while doing an " official " rom update. luckily no one looked too close and they sent me a replacement.
Now I only use Bootcamp and xp. And after more flashes than I can count, I have never had a problem.
I'm trying to flash mr4r4n's ROM onto my Apache but don't know which program to use. I'm using the v1.00 bootloader. thanks!
http://rapidshare.com/files/229309833/21202_apache_100.rar links for you guys enjoy and please post any qustions or comments on my thread
The Link
The link you posted works and Im able to download, but when I try to use the ROMUpdateUtility all I'm getting is a connection error 264. It goes through a step 'verifying the information your PDA phone... please wait...' and then it goes to a screen giving me the error code 264 saying connection error. i have tried on both vista and xp machines.
phone is successfully changed to usb on boot loader screen status, computer recogizes it... not sure what else can be issue.
btw its a sprint phone with 1.00 boot loader. thanks for any help!