Hi everybody,
I seem to have quite a (big?) problem with my ASUS P535: it won't boot anymore. It simply doesn't react at all, nothing can be seen on the display. When connecting the P535 to my notebook, the red LED blinks red (probably not the best thing).
Resetting doesn't help, neither does pressing Power+Camera+Record+Reset buttons.
Any ideas on this?
Thanks a lot!
Daedalus3
Sorry for gravedigging this thread, but in case someone comes here searching for a solution - The blinking red led indicates a dead battery (it simply does not charge, thus blinking the led led) Just find or order online a replacement SBP-06 Asus battery and that should fix it.
Related
Hello, i've been searching around, and cant find anyone with the same problem, so i'll go ahead and make a new post.
Today i got my new phone, and i have a problem turning on the phone after just 40-50min use.
My problem is that every time i try to boot the phone, the screen just lights up really bright white, and then shuts down (this happens no matter what battery i use, it came with 2)
The same white screen appears when i connect the poweradapter. While its running from the poweradapter (not running, just making a fan-sound, tho i doubt its any fans in there) it doesnt react if i press the power button, so i am suspecting the batterie(s)' are the problem.
Thanks for any help
Hi I am having a few hassells with my cruise
1) when I charge it the red light stays red but does charge to yellow but battery charges - phone boots etc
2) as I said in an earlier post the soft reset button doesnt do anything at all - i did try swapping the reset button/button board for another - no effect
3) the camera isnt working
I have been through all the posts here but dont see solutions - any thoughts chaps/chappetts
I also tried updating to HDSPL and new roms and they work but dont help problems
I have two batteries I dont know the history of and am thinking its maybe them? But they doo appear to hold charge so??/
Kind regards
John
Hi XDA-devs!
I've been going through this forum for quite a while now, but sadly I haven't been able to find the answer to my problem
I got a Kaiser 130 which isn't performing very well, actually it isn't performing at all.
Here is the problem:
Fully charged battery (not the problem)
I go push the powerbutton
Green light comes on and no more than that.
What I've tried so far:
Pulled the battery
Pulled the battery and pressed Power for more than 30 seconds.
Pushed the reset button while on (Turns out the green light)
Reset + Cam + Power (Turns it on again)
Power + Softkeys (Turns out the green light)
All sorts of battery dismounting and mounting, which suddenly gave a blink of a red light for a change.
Well this can be fixed! (initial thought)
BUT
I am unable to make the device do anything at all when it comes to USB connections in the way that the device gives no indication to Windows or Linux at all, so how am I supposed to get through to the device with frankenkaiser, MTTY or anything else?
It gives no indication to Active Sync, Windows Mobile Device Center or "The upgrade to WM6.1" HTC program.
The USB-connection is just not working!
The phone looks perfect and has never been used, but has been bricked for more than 2 years before I got my hands on it. It comes from an institution and was never used because it didn't work, so no damage has occoured.
It holds the original rom and has never been modded or anything.
So is this device simply out of my reach or am I missing something?
Derduden said:
Hi XDA-devs!
I've been going through this forum for quite a while now, but sadly I haven't been able to find the answer to my problem
I got a Kaiser 130 which isn't performing very well, actually it isn't performing at all.
Here is the problem:
Fully charged battery (not the problem)
I go push the powerbutton
Green light comes on and no more than that.
What I've tried so far:
Pulled the battery
Pulled the battery and pressed Power for more than 30 seconds.
Pushed the reset button while on (Turns out the green light)
Reset + Cam + Power (Turns it on again)
Power + Softkeys (Turns out the green light)
All sorts of battery dismounting and mounting, which suddenly gave a blink of a red light for a change.
Well this can be fixed! (initial thought)
BUT
I am unable to make the device do anything at all when it comes to USB connections in the way that the device gives no indication to Windows or Linux at all, so how am I supposed to get through to the device with frankenkaiser, MTTY or anything else?
It gives no indication to Active Sync, Windows Mobile Device Center or "The upgrade to WM6.1" HTC program.
The USB-connection is just not working!
The phone looks perfect and has never been used, but has been bricked for more than 2 years before I got my hands on it. It comes from an institution and was never used because it didn't work, so no damage has occoured.
It holds the original rom and has never been modded or anything.
So is this device simply out of my reach or am I missing something?
Click to expand...
Click to collapse
try HARD RESET after power on. tat saved mine two days ago
Hi everyone! Bad news :
I did an upgrade from WM 5.2 to 6.5 on my VOX/S710 and everything was ok, except for the rom wich was in English/German. I was looking for a Spanish one.
I've found a rom I thought it was the correct one but when I did the flash procedure the cellphone suddenly turn off. I've pushed the "on" button and nothing, i put to charge the battery (USB and main power cable)but there's no led activity, it's completely dead.
I've tried to enter the 'bootloader' mode but it doesn't work and the same thing for the soft reset.
The battery was fully loaded before that happens.
Extra: sometimes when i plug the usb, the red led shines for less than a second. I've read that maybe a fuse is broken but i couldn't find any info about it, where's placed, etc.
¿What can i do? Thanks.
Hello folks.
I was doom(Dumb)scrolling Instagram when my X3 pro showed me a white screen with blue dots then shuted down.
Now tt won't turn on, (tried every method known) it isn't recognized by computer while maintaining powder+up pressed.
But, the notification light give life sign by flashing when I plug the phone.
Any idea about the origin ? What can I do to save it, my life is on this phone
Thanks a lot for reading
Kostorn said:
Hello folks.
I was doom(Dumb)scrolling Instagram when my X3 pro showed me a white screen with blue dots then shuted down.
Now tt won't turn on, (tried every method known) it isn't recognized by computer while maintaining powder+up pressed.
But, the notification light give life sign by flashing when I plug the phone.
Any idea about the origin ? What can I do to save it, my life is on this phone
Thanks a lot for reading
Click to expand...
Click to collapse
That's indicates your mainboard is broken. claim your warranty for mainboard replacement or new phone replacement(in some region)
go to nearest service center and bring your receipt/warranty card. It's the ultra problem of vayu/bhima, deadboot.
Thanks for your quick answers, any chance I get my data back ?
If they Replace the main board then Storage is gone.