Database Info

password/pin lock by power button

is there any way to password lock the phone by pressing power button? maybe registry settings, application, or other way? if some1 can explain how, it'll be really great.
tray icon application will be fine too.

If you enable the password feature, and set the time-out to 0, it should ask for a password every time you turn it on.

no, its not suits me, i have 2 minutes phone turn off setting, and i dont want phone to be locked in 2 minutes. all i need is to lock it with power button and auto lock set to 15 minutes.

__s said:
no, its not suits me, i have 2 minutes phone turn off setting, and i dont want phone to be locked in 2 minutes. all i need is to lock it with power button and auto lock set to 15 minutes.
Click to expand...
Click to collapse
Try this:
Kai's Device PIN on/off 1.2
Application Description
Do you protect your device with a password? Then you need this program. Assign it to a button and switch the device PIN comfortably on an off.
User-friendly in 3 steps explained
Deposit (save) the password (encrypted)
Recall by hardwarebutton: ON/OFF of device PIN (without new entering)
Example of use:
You were the hole day away on business and your device PIN is activated. When you get home and you do not want to enter always the device PIN . With this progam you can switch off the PIN easily and quick. On the next day, when you got to work, activate the PIN comfortably by a keystroke without reentering the PIN.
System requirements:
System: Windows Mobile for Pocket PC 2003, 2003 SE, WM 5, WM 6
Screen: 240x320 Pixel or higher
Processors: Samsung, Intel® PXA XScale, StrongARM, OMAP
Its cheap, less than $5.
If it does not power the device off you could use mortscript to run this .exe & a power off .exe & map a script link to a button or an icon or voice command.
Hope this helps.
http://www.pocketgear.com/software_detail.asp?id=22932

1. No trial version
2. I don’t think that utility will satisfy my needs

__s said:
1. No trial version
2. I don’t think that utility will satisfy my needs
Click to expand...
Click to collapse
This program would meet your requirements by having a tray icon or launcher icon.
Mapping it to the power button may not be possible but it could be mapped to any other button if wanted.
This is the only password auto locking software using the standard device lock available.
Your only other option is to create a password on/off MortScript to run Settings/Password and auto input your 4 digit code,tick the required boxes & then run a device off.exe, done this on my old Magician a few years back., works well but its a bit crude compared to Kia's software.

i've download similar application(PSShut XP), but this app doing same as u describe, its runs settings\password lock, and then password promt appears, and u can simply click menue\cancel ). maybe this was working in windows 2003 or wm5, but im using wm6. only thing i've found for that case is vb function SHDeviceLockAndPrompt(), and i need to download SDK and compile an .exe, but im looking easier solution for that problem

clarification
I believe I am also looking for the same functionality:
-scenario: you power off the phone via hardware button and put it in your pocket. In your poocket, the button is pressed accidentally, and because the password lock has not yet auto-activated, the screen is active and you accidentally call your boss, or a total stranger
If this is your scenario, there is a 'screen saver' called MortSaver that can prevent this situation: it requires you to press a 2nd hardware button (user defined) to fully close the screensaver. unfortunately it will not instantly enable the password lock.
this does seem like nothing more than a simple api call, but i would be surprised if there isnt an .exe somewhere to do it aready. will have a look around.
-nate

clarification
I believe I am also looking for the same functionality:
-scenario: you power off the phone via hardware button and put it in your pocket. In your poocket, the button is pressed accidentally, and because the password lock has not yet auto-activated, the screen is active and you accidentally call your boss, or a total stranger
If this is your scenario, there is a 'screen saver' called MortSaver that can prevent this situation: it requires you to press a 2nd hardware button (user defined) to fully close the screensaver. unfortunately it will not instantly enable the password lock.
this does seem like nothing more than a simple api call, but i would be surprised if there isnt an .exe somewhere to do it aready. will have a look around.
-nate

Are there any news about such an app?
I wanted my Artemis pin looked, when i switch it off manually or when 5 min have passed.

try AC's S2U

deedee said:
try AC's S2U
Click to expand...
Click to collapse
I know S2U2, but it's "too big" for my artemis! I'm looking for a small tool. And I want the device locked securely. Slide is not enough.

Stuhl_im_Orbit said:
I know S2U2, but it's "too big" for my artemis! I'm looking for a small tool. And I want the device locked securely. Slide is not enough.
Click to expand...
Click to collapse
S2U2 has a PIN lock, but yes it is a tad on the big side.

Backlight when keyguard activated

Any ideas how I get the backlight to come on when the keyguard is activated? Its really hard to see the keys.
Also, in windows mobile 5 on my XDA mini s the keyguard deactivated when the passcode was entered. on this version the 'enter' button has to be pressed before the pass code is accepted. Can this be switched off?
Cheers!
James

I have the same questions... can anybody help us?

I did find reg hacks on the upgrading forum section - didnt work for me though

This is a big problem. Today I was outside and the sun was shining. I could not enter the passwort because the screen was too dark... I need some help.

underzone said:
I did find reg hacks on the upgrading forum section - didnt work for me though
Click to expand...
Click to collapse
Hi there, could you tell me where you found the reg hacks? I would like to give it a go since I am desperate enough to try anything to sort this problem out.

This Registry entry swichtes on backlight when device is suspended and blocked:
Rename folder HKCU\ControlPanel\Backlight\LockLevel to:
HKCU\ControlPanel\Backlight\LockLevelX
OK, accept = yes, Soft-Reset
It's somewhere in tricks thread, for me it works like a charm.
Rgds,

francescrm said:
This Registry entry swichtes on backlight when device is suspended and blocked:
Rename folder HKCU\ControlPanel\Backlight\LockLevel to:
HKCU\ControlPanel\Backlight\LockLevelX
OK, accept = yes, Soft-Reset
It's somewhere in tricks thread, for me it works like a charm.
Rgds,
Click to expand...
Click to collapse
It's not working. Although I renamed HKCU\ControlPanel\Backlight\LockLevel
-> HKCU\ControlPanel\Backlight\LockLevelX
After soft reset, HKCU\ControlPanel\Backlight\LockLevel come back again & HKCU\ControlPanel\Backlight\LockLevelX appear to be a new registry entry.

calvin_M said:
It's not working. Although I renamed HKCU\ControlPanel\Backlight\LockLevel
-> HKCU\ControlPanel\Backlight\LockLevelX
After soft reset, HKCU\ControlPanel\Backlight\LockLevel come back again & HKCU\ControlPanel\Backlight\LockLevelX appear to be a new registry entry.
Click to expand...
Click to collapse
Yes, that is right, both folders are there now. When creating LockLevelX, did you click in ok on the top / right side of screen ?
Rgds,

Yes I did that.
I thought your suggestion will turn the backlight on when we press the key while the key is locked.
Anyway your suggestion can help in the following scenario
http://pdaphonehome.com/forums/656913-post81.html

calvin_M said:
Yes I did that.
I thought your suggestion will turn the backlight on when we press the key while the key is locked.
Anyway your suggestion can help in the following scenario
http://pdaphonehome.com/forums/656913-post81.html
Click to expand...
Click to collapse
I feel sorry when it's not what you were looking for. Anyway, "my suggestion" comes from HTC Polaris tweaks and tricks
Rgds,

Hi I found this 'fix' on google, i think it was on an HTC forum (i.e. via htc website).
I have O2 Orbit2 and had the dim screen on keylock/password lock. (While those who don't have it may not see the problem i couldn't actually tell if the machine was on or not, in sunlight, to unlock!)
The solution was to goto HKCU\ControlPanel\Backlight\LockLevel
and change the value to 00000003.
The only issue is that on my Orbit2, using PHM regedit, this immediately 'fixes' the issue but reverts on reset!
Just means I have to re do the reg edit after every reset.
BTW have been very annoyed at the '10 second' backlight bug so am hoping locklevelx will fix that.

Very glad to say that renaming lock level to locklevelx has sorted out both problems! I now have both folders HKCU\ControlPanel\Backlight\LockLevel&HKCU\ControlPanel\Backlight\LockLevelx
The backlight now goes off after 30 seconds when the keys are unlocked.
When the keys are locked the backlight stays on for ten seconds, it will then come back on for ten seconds with any button press or screen tap.
On resume from standby, locked or unlocked the backlight is on.
Step by step of what edits I made.
HKCU\ControlPanel\Backlight\LockLevel; value set to 00000003;
then
HKCU\ControlPanel\Backlight\LockLevel renamed to HKCU\ControlPanel\Backlight\LockLevelx
HKCU\ControlPanel\Backlight\ string battery timeout; value set to 30
SOFT RESET
Then looking at the registry
HKCU\ControlPanel\Backlight\LockLevel; has value 0
HKCU\ControlPanel\Backlight\LockLevelx; has value 00000003 (displayed as 3)
HKCU\ControlPanel\Backlight Battery timeout = 30

As previously mentioned the renaming of the folder worked on my orbit II
http://forum.xda-developers.com/showthread.php?t=351709

HELP!! a bricking - how can I hard reset?

I know it is my fault, I was using the Advanced Configuration Tool and thought I could make the screen on the x7510 more sensitive. The result was the opposite and the screen now won't respond to taps at all. So no possibility of screen input.
Without that, I can't use the same tool to put the settings back to what they were before, as it requires a screen tap to commit changes before re-booting. The absence of soft keys on the keyboard makes for problems here.
For the same reason, I can't hard reset using the Clear Storage tool, as that also requires a screen tap. I can't use Resco Registry Editor as that requires screen taps too.
So I am in somewhat of a quandary, happy to hard reset and start again, but no way of doing it that I can see.
Could I re-load the ROM? Someone uploaded the WWE version, but it unzips to three .raw files, which I have no idea what to do with.
Help please!! I need this as I am on holiday, I may be slow coming back to any replies, we are in Laos, where comms are, shall we say, a little slow, and we are travelling about. the first chance i get to sort this out I will use though.
Thanks for any help anyone can give.
rjstep3

If you have access to a PC onto which you may install software, then you can download and install MyMobiler, which is freeware. Get it here: www.mymobiler.com.
This will allow you to control your device from the PC, using the mouse, so you'd be able to make the changes you need to make.
Good luck!

rjstep3 said:
I know it is my fault, I was using the Advanced Configuration Tool and thought I could make the screen on the x7510 more sensitive. The result was the opposite and the screen now won't respond to taps at all. So no possibility of screen input.
Without that, I can't use the same tool to put the settings back to what they were before, as it requires a screen tap to commit changes before re-booting. The absence of soft keys on the keyboard makes for problems here.
For the same reason, I can't hard reset using the Clear Storage tool, as that also requires a screen tap. I can't use Resco Registry Editor as that requires screen taps too.
So I am in somewhat of a quandary, happy to hard reset and start again, but no way of doing it that I can see.
Could I re-load the ROM? Someone uploaded the WWE version, but it unzips to three .raw files, which I have no idea what to do with.
Help please!! I need this as I am on holiday, I may be slow coming back to any replies, we are in Laos, where comms are, shall we say, a little slow, and we are travelling about. the first chance i get to sort this out I will use though.
Thanks for any help anyone can give.
rjstep3
Click to expand...
Click to collapse
hi
To make a Hardreset hold the volume slider down and press the reset button.
see wiki
http://wiki.xda-developers.com/index.php?pagename=Athena_Resets
but keep it in your mind that all your data (in rom) will be lose after hardreset
saied

thanks guys, just back from the Far East, appreciated your help and everything now restored.
rjstep3

For reference, I had this same problem yesterday. Didn't know of this thread at the time but managed to sort it out. It is completely possible to use the "clear storage" option in Settings>>System navigating using the keyboard. Fn>>OK brings up the start menu..navigate to settings using the cursor keys..press enter to select. Use TAB and cursor keys to navigate around across the tabs to "System" and again from there to "Clear Storage". Select whether to wipe the data stored on the device, on the flash disk or both using cursors/TAB, type "1234" and press the "OK" key. Done.
I had even managed to configure hardware buttons to the left/right soft keys to try to revert the settings in Advance Config, but it seems the effect of completely losing touch screen functionality is irreversible
Or you could obviously use the other method above which I didn't think to look for!! Like I said, just for reference. Might be useful to someone.
TIP: Don't change "Pressure Threshold" in Advanced Config to "Very High" as it will cause your touch screen to stop responding and the only way to get it back is by a hard reset.

Disconnect DataConnection via code.... (Eg: Mortscript)

How to disconnect GPRS via code? (eg Mortscript)
I mean just launching a script, without use CommManager or the "bubble"...
There must be a way. Some people have written software that turns 3G on/off, so there must be a similar way (without using something that switches the connection off after a few time)...
Thanks in advance for any answer...
Cheera

Any help?

Check the manual, page 55.

Zoltair Wright said:
Check the manual, page 55.
Click to expand...
Click to collapse
Thanks for you help...
I knew that command, but it doesn't work on my device (and in others too)...
Please help!

If i'm not mistaken, in the main Mortscript Examples thread in the dev&hack section there's a script to automatically download emails using a data connection. you can see if it contains that script.

cant you use long press key and choose disconnect data? works for me no probs?

timmymarsh said:
cant you use long press key and choose disconnect data? works for me no probs?
Click to expand...
Click to collapse
For me it doesn't work....
Long-press red key just locks my device....
Any other idea?

ah but you can change long press key settings. its in settings/buttons/end key or sometimes in settings/system/.

timmymarsh said:
ah but you can change long press key settings. its in settings/buttons/end key or sometimes in settings/system/.
Click to expand...
Click to collapse
Thanks for this trick....
Do you know what is the reg key which is editet with this simple operation?
Is there any possibility to simulate long press red button to disconnect GPRS via code?

I too would love to find a key button way or larger touch screen way to manually disconnect the data connection. The 3G sign is so small - I have to take out the stylus.

YoungOldDude said:
I too would love to find a key button way or larger touch screen way to manually disconnect the data connection. The 3G sign is so small - I have to take out the stylus.
Click to expand...
Click to collapse
well depending on the build of your rom, the long press end key will end data connection if yoyu so wish, you just have to select the item in the settings as decribed above. I dont see the need for script or code to do this if your rom supports the function anyway?

That's great advice - thanks but my rom is obviously different.
ie. In the pulldown menu for button functions - there is no end option. The nearest thing is OK/Close but long holding that changes the speaker/vibrate - it doesn't effect the data connection..

Sorry I was assuming we needed to add a different function to one of the hardware keys. In which case an `end' was not in the pulldown options for button assigning. I finally realized that simply pressing the call end key itself does indeed disconnect the data connection.
Thanks a lot for your help.

no problems my friend

Wake up the phone with every button

Hi all.
I know there's a registry hack to wake up the phone with every button, not only with the ON/OFF button but I'm not able to find the topic. I can't find the right words to search...
Can someone help me? Thank u very much for all u do here. Bye

mylostnick said:
Hi all.
I know there's a registry hack to wake up the phone with every button, not only with the ON/OFF button but I'm not able to find the topic. I can't find the right words to search...
Can someone help me? Thank u very much for all u do here. Bye
Click to expand...
Click to collapse
It is just a windows mobile setting:
Start -> Settings -> System -> Key lock -> do not lock keys (or something like that, I have a dutch phone).
Make sure you have a good locking solution, like TouchLockPro, because your phone will awake regularly when the keys are pressed.

Hi ZuinigeRijder.
First of all thank u for ur reply.
Then, unfortunately I can't find these options on my phone (in the latest three different ROMs I've tried these options are no more in the settings, one 6.1 and two 6.5 ROMs).
Some times ago I've found a post with a registry hack to obtain that result.
But now I can't find that post anymore.
Thank u very much

Sorry, I've found it!!!
And here it is for all who need it:
Code:
HKEY_CURRENT_USER\ControlPanel\Keybd\DefaultKeyLock
set it to 0 and all the hardware keys will wake up the phone.
Thank you for all.

Actually here is the easier way. Install this control panel app, to control the key lock. Its made by HTC, and has been included on their devices for a looong time now. But I do believe certain OEM's/Carriers remove this for some unknown reason.

doesen't work

I'm trying to do the opposite...I'm trying to disable all keys wake up...but that registry entry and HTC key lock app doesnt work for my HD2.

RelicXII said:
Actually here is the easier way. Install this control panel app, to control the key lock. Its made by HTC, and has been included on their devices for a looong time now. But I do believe certain OEM's/Carriers remove this for some unknown reason.
Click to expand...
Click to collapse
Thank u for this info!
This explains why I had this tool in the original ROM but I haven't found it in the next cooked ROMs I tried!
Bye-

sakana said:
doesen't work
Click to expand...
Click to collapse
Did you soft reset after installation?
And I would have no idea why it doesn't work on the HD2??

Confirmed - Key Lock Cab on HD2 Does not Work
Confirmed, loaded the Key Lock cab, reset phone.
Start>Settings>All Settings>System>Key Lock -
elected <Lock all buttons except for power button>
Reset the Phone
Phone can still be powered back on by any hardware button
Would appreciate any assistance.

Hennyb said:
Confirmed, loaded the Key Lock cab, reset phone.
Start>Settings>All Settings>System>Key Lock -
elected <Lock all buttons except for power button>
Reset the Phone
Phone can still be powered back on by any hardware button
Would appreciate any assistance.
Click to expand...
Click to collapse
What device are you using? As far as I know this should work on most if not all HTC Winmo devices.

Key Lock does not work with HD2
RelicXII said:
What device are you using? As far as I know this should work on most if not all HTC Winmo devices.
Click to expand...
Click to collapse
It is an HD2. Several people have advised that Key Lock does not work with HD2.