im stumped. I have v1.00 bootloader and I have tried to flash it but when the ruu kicks my phone into the bootloader I get an connection error and the phone is stuck in the botloader. I don't understand why it won't update. my frst apache was a 2.04 and I had no problems. any suggestions?
i think i'm having the same problem with my apache. which RUU are you using?
http://rapidshare.com/files/229309833/21202_apache_100.rar links for you guys enjoy and please post any qustions or comments on my thread
mine is doing the same. I can't seem to fla h from any source. Connection errors from ppckitchen, even country code error from pdaj's clean roms/ruu. Help? XV6700 Verizon, aku 3.3, bl 1.04, Vista
Related
Hi all,
yesterday, i thought it's a nice day to do the official german t-mobile 1.12 upgrade on my official german t-mobile mdac. It wasn't.
After the upgrade (no errors) the bootscreen shows:
no gsm, and only one Version number: 1.12.01 Ger
on the bottom line.
After it bootet, i get no gsm and no bluetooth working. When i connect by usb, active sync hangs for about 3-5 minutes. If i try to repeat the upgrade, i get something like wrong device, and it shows empty fields on the version screen. I tried to do the update by extracting the official update rar and start the update by MaUpgradeUT_noID.exe, but it says something like wrong device.
I tried this to the same with the 1.13 upgrade from the xda ftp, same thing. I tried a rombackup from sd-card that i found somewhere on the net, but the bootloader says wrong section=1 not allowed.
Is there anybody wo could help me to resurrect my poor little mdac?
Thanks alot,
J
Hi J.
Don't know how to solve all your problems with upgrading, but did you copy the first bytes of your own romdump to the downloaded rom? Otherwise your device won't accept it, you can find a lott about this in other threads. try searching for BigStorage and you will everything about rom upgrades.
Good luck, M
Upgrade your device with the imate rom 1.12 wwe using MaUpgradeUt_noID.exe ,it should work ,then try to upgrade to the german rom upgrade.
Good luck
ongoing revival
Ok, i tried that big storage thing, i replaced the id in the new image from my backup (broken) rom, and when trying to upgrade from sd-card, i get Section = 1 not allowed update.
I'm trying to upgrade the radio stack from the bootloader screen with MaUpgradeUT.exe, but it seems that the usb port doesn't work: for 10 minutes, the update screen stands at 0%, then an error appears:
Radio Rom Update Error.. i should reset, reconnect and retry.
Any more ideas? Is there a possiblity to do the normal "online" update (not via bootlaoder/backup-image) just from sdcard?
Please Help
J,
Last night I did a BigStorage in a very easy way. I followed the description in the thread about upgrading to radio 1.13. You'll have to unzip the shipped rom, decode nk.nbf it with dnbf. Then you replace the usual bit pattern and encode nk.nb1 again. After that you can use maupgrade with or without the noid function like a regular apgrade.
Hope it helps you, M
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Hello all,
I have been reading xda-developer forums for a last couple of weeks, but I didn't managed to find a "proof" that someone succeded in installing hardSPL on a TyTN II device with SPL-1.93.0000, and successfully flashed one of 6.1 ROMs.
I have HTC branded TyTN II (NOT locked to any network SIMs - tried with 3 different SIMs from 3 different operators and they work) with following information:
ROM version: 1.56.405.5
ROM date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
CE OS 5.2.1620 (Build 18125.0.4.2)
Soft-reseting device with cammera button pressed (NO USB connection - cable not connected to PC) leades me to a tri-color screen which shows:
KAIS130
SPL-1.93.0000
CPLD-8
and a text "Serial" on the screen.
My question is: is there anyone who managed to install HardSPL on a device with same SPL 1.93.000 and with what tools (HardSPL, JumpSPL, SSPL .... )?
Also, does anyone have this version of original (shipped) ROM - it seems that there are (very) similar ROMs around, but I didn't manage to find exactly the same version ?
Thanks for any help on this.
Nenad
Same here: http://forum.xda-developers.com/showthread.php?t=372134
I installed with same version, seems there is a problem in the USB driver of the computer so that some people get failed~~~
Dragonet said:
I installed with same version, seems there is a problem in the USB driver of the computer so that some people get failed~~~
Click to expand...
Click to collapse
Thanks for info ! Can you, please, tell me did you have to use JumpSPL, and if you used it, did you use JumpSPL_1.56 or some other version (I think I have seen some other versions posted, but I cannot find thread anymore) ?
Nenad
nenadr said:
Hello all,
My question is: is there anyone who managed to install HardSPL on a device with same SPL 1.93.000 and with what tools (HardSPL, JumpSPL, SSPL .... )?
Nenad
Click to expand...
Click to collapse
I am sorry I do not remember the SPL version I had originally, however it seems most problems experienced seem to be related to the device not being detected correctly by the PC when in TriColor screen mode.
If you are using Vista the above problem seems all too frequent.
I did not have any problems the first few times, Vista worked just fine but then one day I started having problems and Vista could not detect the device correctly. (even though "USB" appears on the TriColor bootloader screen does not mean it is correctly detected)
If you are using Vista then you could try the following instruction - this worked for me...
http://www.modaco.com/content/Windows-Mobile-News/252977/RUU-on-Vista-It-can-be-done-the-ultimate-guide/
As I say there are probably other ways, but since I installed these ActiveSync 4.5 drivers I have never had any problem.
There are 2 methods to flash HardSPL, if you get stuck in "White Screen" using the traditional method, then you will need to use JumpSPL fom the alternate "White Screen" method.
nenadr said:
Thanks for info ! Can you, please, tell me did you have to use JumpSPL, and if you used it, did you use JumpSPL_1.56 or some other version (I think I have seen some other versions posted, but I cannot find thread anymore) ?
Nenad
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=354061
Read this post CARFULLY and the everything will be solved easily,I installed HardSPL and always flash any rom without my very bad Vista,you can also do that,it is very easy, brother~~~
Redundant...
Colossal Hammer of Closure
[Thump]
Help!!!
I have a sprint 6700 and have tried to flash to VZW with zero success. I have tried everything I could think of...
Found the sprint msl with getspc no problem.
Downloaded the vzw latest aku3.3 rom, won't install.
Tried to install in bootloader and not in bootloader mode.
Tried different roms and none work (official sprint ROM loads fine)
Tried BuildOS with noid and get the same error.
I have ver 102 bootloader and have tried with activesync on and tried with activesync disabled.
I never get past the first screen. I get "Error 120 Country ID Error" window and only option is exit. I looked here, ppcgeeks, pdaphonehome, and google and have not come up with any solutions....
This seems to be an impossible thing, to change from sprint to verizon....
Any thoughts or ideas????
Thanks
T
Same Here ! Help !!
I have the same problem with you all,, but it seems no one relpies to this thread. So what i should then using rom for sprint or what?
ive got a t-mobile wizard 200 dutch edition
i had a win 6.5 rom loaded and it worked fine
but for some wierd reason i wanted to downgrade it to the original win5 rom
when i was at 55% my 1 year old sun pulled the usb cable
now i can't get any new rom in the phone that works
is there anyone that could help me
everytime i get the bootloader screen and that's al
Don't give up hope. As long as you can get the bootloader screen, you should be able to burn a rom. Try the CR96 WM6.5 ROM, in my signature, which if I remember right comes with a Vista RUU. If it doesn't, search this forum for Vista RUU, which I have found to work well for installing ROMs from the bootloader, in XP or Vista. I don't know about Windows 7, since I have never had it.
i've tried the link you sugested
after running the update the startup screen of the phone changed from t-mobile to a HTC logo and after that it shows the bootloader and nothing more
ipl 2.18.001
spl 2.26.001
is there anyone with an original rom for this phone becouse the one i thought was original is damaged and maybe an original rom can repair this phone
or is there anyone with different idea to solve this problem ?
edit: i found an original german ship rom but when i try to laod that on the phone he gives a error
something with wrong phone id
edit: i found a file with t-mobile g4 ipl/spl after i loaded that one
ipl changed to 2.26.001 spl stayed 2.26.001 but stil no respnce to loading roms
i found a threat where they where talking about the love rom
i downloaded it and uploaded it to the phone and everything was back online and i could do anything again with the phone