Hello all,
I have been reading xda-developer forums for a last couple of weeks, but I didn't managed to find a "proof" that someone succeded in installing hardSPL on a TyTN II device with SPL-1.93.0000, and successfully flashed one of 6.1 ROMs.
I have HTC branded TyTN II (NOT locked to any network SIMs - tried with 3 different SIMs from 3 different operators and they work) with following information:
ROM version: 1.56.405.5
ROM date: 08/28/07
Radio version: 1.27.12.32
Protocol version: 22.45.88.07H
CE OS 5.2.1620 (Build 18125.0.4.2)
Soft-reseting device with cammera button pressed (NO USB connection - cable not connected to PC) leades me to a tri-color screen which shows:
KAIS130
SPL-1.93.0000
CPLD-8
and a text "Serial" on the screen.
My question is: is there anyone who managed to install HardSPL on a device with same SPL 1.93.000 and with what tools (HardSPL, JumpSPL, SSPL .... )?
Also, does anyone have this version of original (shipped) ROM - it seems that there are (very) similar ROMs around, but I didn't manage to find exactly the same version ?
Thanks for any help on this.
Nenad
Same here: http://forum.xda-developers.com/showthread.php?t=372134
I installed with same version, seems there is a problem in the USB driver of the computer so that some people get failed~~~
Dragonet said:
I installed with same version, seems there is a problem in the USB driver of the computer so that some people get failed~~~
Click to expand...
Click to collapse
Thanks for info ! Can you, please, tell me did you have to use JumpSPL, and if you used it, did you use JumpSPL_1.56 or some other version (I think I have seen some other versions posted, but I cannot find thread anymore) ?
Nenad
nenadr said:
Hello all,
My question is: is there anyone who managed to install HardSPL on a device with same SPL 1.93.000 and with what tools (HardSPL, JumpSPL, SSPL .... )?
Nenad
Click to expand...
Click to collapse
I am sorry I do not remember the SPL version I had originally, however it seems most problems experienced seem to be related to the device not being detected correctly by the PC when in TriColor screen mode.
If you are using Vista the above problem seems all too frequent.
I did not have any problems the first few times, Vista worked just fine but then one day I started having problems and Vista could not detect the device correctly. (even though "USB" appears on the TriColor bootloader screen does not mean it is correctly detected)
If you are using Vista then you could try the following instruction - this worked for me...
http://www.modaco.com/content/Windows-Mobile-News/252977/RUU-on-Vista-It-can-be-done-the-ultimate-guide/
As I say there are probably other ways, but since I installed these ActiveSync 4.5 drivers I have never had any problem.
There are 2 methods to flash HardSPL, if you get stuck in "White Screen" using the traditional method, then you will need to use JumpSPL fom the alternate "White Screen" method.
nenadr said:
Thanks for info ! Can you, please, tell me did you have to use JumpSPL, and if you used it, did you use JumpSPL_1.56 or some other version (I think I have seen some other versions posted, but I cannot find thread anymore) ?
Nenad
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=354061
Read this post CARFULLY and the everything will be solved easily,I installed HardSPL and always flash any rom without my very bad Vista,you can also do that,it is very easy, brother~~~
Redundant...
Colossal Hammer of Closure
[Thump]
Related
hi all,
I installed 5._Underground_edition_Crossbow_ROM.exe
on qtek 9100 for tmobile.
Before installing this rom I installed custom_ruu_wizard_1050412....... bin and unlocked CID and phone.Now after successfully installed 5._Underground_edition_Crossbow_ROM.exe, I cannot make a call and I cannot sync with active sync v4.5. What should I do? How do I make activesync work sothat I can try another ROM? Whenever I try to goto phone or activesync setup it gives me error "a problem has occured with device.exe".
Please help me out.....
before update
IPL : 1.08
SPL : 1.08
OS : 1.8.10.2
after crowbow update
IPL : 1.01
SPL : 1.01.0000
OS : 10.1.6.811
my mistake was I didn't update my 9100 to 2.26 before updating to Crossbow.So looks like communication cab has been not installed.Is there any way my 9100 can communicate with Activesync?
thanks in advance.
u shd hv read the threads here and then updated it..to upgrade to wm6 underground edition u shd hv SPL greater than 2.xx..due to which GSM is not flashed as it has 2.47 version..u need to upgrade now to a rom which has SPL 2.xx and then do the underground edition
but how do I upgrade ? ,because when I connect usb cable to the phone nothing happend. i.e. activesync cannot start.
You should take time to read and search the forums. There are numerous posts with similar issues...
You need to get to the bootloader. Turn off your phone, then hold down the camera button while you turn it on, and you will be at the rainbow (bootloader) screen. Now you can flash.
Read the thread by Dr. P in the Wizard Upgrading forum. You have to follow every step exactly as it says (the last step is to upgrade to a 2.x official ROM).
thanks mfrazzz, you saved my $200, I installed 2.26 rom and then upgrade and now its working like a charm.
Thanks once again.
So I been trying to upgrade my OS to the tnt 1437, however every time I try my old OS keeps popping up (OS: 5.1.xxx (Build 15671FARIA.3.5)) ... so for the last 3 days I been trying to search this site for any answers, however all I get is that only happens if the CID is locked, but my phone isn't 1) I unlocked it before to upgrade it in the first place to the above mentioned OS and 2) I checked its status with the Wizard Service Tool (which is AWESOME). So i'm at a lose here as to why every time I either upgrade or downgrade the ROM the same OS keeps showing up. BTW Everything else I can upgrade except the OS. Any help is appreciated. thanks!
Anyone? Anything?
Did you remember what version of IPL and SPL when you unlock your Wizard? It is only unlockable when IPL and SPL is 1.xx (i.e. Downgrade to Button's ROM first). You may post your WST log here for more chance to know what the problem is.
Here you go here is the log:
Wizard Service Tool v4.2.1
12/11/07 23:07:22
CPU Manuf. FAILED
MODEL: Wizard
=> Bootloaders:
IPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
Getting more info...
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio values FAILED
=>Extended_ROM:
Version: faria V4.0
Name: Extended_ROM
Status: hidden
Getting drives,disks and partitions info...
=> Drives and partitions:
|--Handle--|---Size---|
6e9d5352 - 9.99M (0x9fd800)
eea9813a - 48.23M (0x303c000)
2fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
cfb23fb6 - 3.06M (0x30fc00)
All Done.
Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?
kegobeer said:
Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?
Click to expand...
Click to collapse
Yes I tried both the button ROM and the love ROM with no change ... On another note I can change the IPL and the SPL with no trouble however the OS always stays the same.
Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?
kegobeer said:
Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?
Click to expand...
Click to collapse
I just tried what you mentioned however I got the following error when I was doing the ROM update .... fyi I got it from the tmobile site ... when I ran the rom update I got:
error [326]: invalid command
this nbf file cannot be used for your pda phone. please check your nbf file.
It looks like you originally skipped the 2.26 rom. I did the same thing the first time I flashed a rom. Try flashing back down to the Button rom, then to the 2.26, then the tnt 1437. It worked for me.
Am I doing something wrong here cause every time I try some downgrade its always the same OS that shows up ... 3.3.0.0 that NEVER changes, everything else does.
i have the same problem..
8125hacker said:
i have the same problem..
Click to expand...
Click to collapse
What OS does your phone boot with?
bad flash rom, you need junk the phone or donate to XDA-developers
first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys
da_jojo said:
first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys
Click to expand...
Click to collapse
Out of curiosity when I downgrade to any of these roms am I looking for the OS to downgrade or just the IPL/SPL?
cgigate said:
bad flash rom, you need junk the phone or donate to XDA-developers
Click to expand...
Click to collapse
how is it a bad flash rom if the IPL/SPL and GSM all change everytime i change roms. The only thing that doesn't is the OS.
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
ashtrays said:
Hi, i have a problem with my qtek 9100.
I want to install a touchflo rom with a cube, i have tryed with a lot of roms
I have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613
to flash my wizard and unlock CDI and that worked fine, so i can install a rom.
Everythning has gone fine untill step G3.7, i have ipl/spl 1.01 when i trying to install "T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe.html but an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues.
i restart my PDA phone, then i came to the 3 colored mode again and my IPL is 1.01 and SPL is 2.26. What it wrong? how do i fix so i can install a wm6 touchlo rom? Most of all i want a swedish wm6 rom.
Please help, it would be so nice, i have serached on this forum for many days and many many hours and i have reinstalled the roms and begin from the beggining at the guide many many times but i cant find a sullution that works please help me.
Sincerly yours// Johan
Click to expand...
Click to collapse
i would flash back down to the button rom to get your ipl/spl back to 1.01, then try the Xda_MiniS_LaunchROM_v154102 that is listed in the guide if you havent already. were there any errors when you were doing the CID unlocking?
download the wizard service tool if you dont have it (Wizard Upgrading forum) and see what the CID Actions button says when you choose read CID block.
okey, thank you so very much i will try that now and i come back with an answer how it work later there were no errors due the CDI unlocking haha my english is very bad
Edit: now i have installed the Xda_MiniS_LaunchROM_v154102 but i get stuck every time in the customization "installed signed_discobutton8.sa" i get stuck there, does it matter? Can i restart my PDA and it works as i schould do?
Sincerly yours// Johan
Now i have installed wizard service tool v4.2.1.. and it says that is CID unlocked and SIM unlocked. What do i do now to install wm6 touchflo with cube. I have download this rom: Artemis Touch 3.01 full. How should i do now?
Best regards// Johan
Edit: do i have to install windows mobile 6 so i can install a touchflo and cube rom?
best regards // Johan
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
I have the same Problem. But it's not just that I can't upgrade to 6.1... I can't do anything. I tried to get different Roms on my Magician. The original Rom too...but nothing works. All that since I tried the 2.03TX Rom... The 2.03TX is working nice at the moment but I would prefer the original one or WM6.1 Please help!!!
I had no problem switching between tx and 6.1 - both directions.
The only thing I had to be aware of is the radio version. 2.03tx doesn't install it's own radio and last cotulla rom requires radio 1.12.
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
phamhien said:
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
Click to expand...
Click to collapse
Check following 3 points:
1. Make sure your device is a "Magician"
2. Make sure the downloaded ROM is one of Cotullas WM6.1 (O1 , O2 or O3)
3. Befor flashing make sure the Radio on the Magician is version 1.12
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
targets said:
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
Click to expand...
Click to collapse
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
kamillo-s said:
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
Click to expand...
Click to collapse
Maybe you have a problem with your PC, maybe you are doing wrong, or maybe your Magician is corrupted.
I don't know much about the bootloader, guess it is on his own chip and not changeable at this time, otherwhise it could be a part of the rom but i have never seen a Magician bootloader-file for itselfs.
hubie53 said:
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Click to expand...
Click to collapse
try to change the usb port to another....
or make sure u have the newest activesync...
Thanks for your help! i 've upgrade succesed for my magican!
I try update on other magican, and was succesfuly. I think I cant update rom after instaling 2.03 tx that something was broken or its something wrong witch magicans software. I have this same model of magican ,and other rom, and I can flash it.
same same here
i had the same problem with my magician i think it happens with some devices not all of them i couldn't find any way yet to solve it.
WM 6.1 for Magician-a fake?
Managed to flash my device with Windows XP. Works fine, thanks to all helpers!!!
dead.....!!!!
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
learnig said:
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
Click to expand...
Click to collapse
thx the problem was solved.thx
hubie53 said:
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
Click to expand...
Click to collapse
i Have flash my jam with 2.03 TX WWE and then downgrade to original i mat jam
after a month i flashed it again and can't downgrade or upgrade or do anything for 1 1/2 year
i tray many things like sd flash and many roms but it didn't work
may be Mr.Cotulla have a solution for it or any one have it share it to us
the only thing we can made is to inter the boot loader mode
Thanks