Fastboot question - G1 Android Development

Is there anyway to transfer files while in fastboot mode? I have no idea where the F*** my usb adapter went but I flashed haykuros SPL and I'm stuck at the G1 screen, I can enter recovery mode and can enter fastboot mode. Help would be appreciated.

wow if only there was a thread related to the SPL you attempted to flash that you could post your problems in. if only there were instructions when you found the new SPL that you could have followed. if only there were some way you could quickly and easily sift through hundred of thousands of posts looking for key terms or words that are commonly used by n00bs with problems

Dude with all the effort you took to just write that you could have easily answered my question. I did search for this before I posted this thread. Please people don't be rude, I didn't really screw your day up by posting this thread. Its simple and concise, so how about now?

what do you want to transfer? to transfer files to your phone, use adb. Read this, but since you can't start up the phone, just make sure your bootloader says "FASTBOOT" (if it doesn't, hit the back button on your g1) and follow the instructions: http://forum.xda-developers.com/showthread.php?t=502010

Related

Noob question about flashing (sorry, I DID read the stickies!)

Ok here goes. Be nice, I'm new...
I have a Stellar in front of me (or Kaiser, TyTynII etc) which has managed to get itself into Boot Loader. I'm usually pretty good at getting these out of it but this one has me stumped, and I'm hoping someone may be able to give me some suggestions, or confirm my suspicions that it is kaput.
It's in Serial mode at the moment, showing
KAIS130
SPL-1.82.0000
CPLD-8
on the top of the screen.
So I plugged it into the computer and it nicely popped into USB mode which then let me flash it, using the file: RUU_Kaiser_O2_UK_1.82.206.1_radio_sign_22.45.88.07_1.27.12.32_Ship
This appeared to take, started the process, splash screen loaded, windows mobile loaded OK and for all intents and purposes was back at the factory reset (which is what I wanted). HOWEVER.....when I performed a soft reset it went back into Boot Loader and I'm now back at square one.
Any ideas? I can't install any homebrew ROMs on this, it HAS to be the standard ROM for reasons I'm not at liberty to post here (don't worry nothing illegal is going on, suffice to say, I shouldn't really be here!)
I have at least 2 others that are doing similar as well and would like to get these fixed also. All help/comments gratefully received and I apologise again if this is covered somewhere else.
It seems you have not done any SPL hard flashing yet.
Did you really read the Flashing for Noob sticky ? It's there .. first you need to do hard SPL, SIM/CID Unlock, then only you can change your ROM to anything.
Please go back and re-read.
Sorry. Will this do anything bad to the device, only I've never done anything like that before, I've just run the ROM flash file. I've never had to do anything like you suggested before. It needs to be put back to factory as it is going to get allocated to someone - which means I then have to install a clone over the top of this.....sorry if I'm being thick. I did read the document you suggested but that resulted in me getting more confused.
If this is not the right place for me to be, please feel free to close this thread and I'll keep looking elsewhere. Cheers.
Hi,
First of all: what do you want to do? Read this to clarify your intention
Take your time, read through the WIKI first.
After that, if you still want to flash, go to the Noob sticky.
If you don't have the passion, I'd suggest just use the phone as from factory. Reading the Wiki still will give you insight and many good tips/tricks without flashing.
Edit to addI apologize.
After re-reading again, it seems that what you're trying to do is reviving the dead Kaiser. From the SPL version, it's not yet 6.1. You can check out here to see any other official ROM matches, which what you currently use seemed to be correct.
Mod, please merge this with Kaiser stuck at Bootloader thread ..
Good luck.
Edit 2
It seems that when you did a soft reset (by pushing at the small hole using stylus?), the other two buttons (camera + power) are still pressed (or due to hardware, kept being pressed), thus resulting in boot loader displayed again?
Well that's why I couldn't work out why I couldn't get the ROM to stay.....this has never happened before! So yes, I am trying to revive a seemingly busted Kaiser. The customer handed it to me in Boot Loader mode. Usually running the RUU fixes this and we can then go about rebuilding it. However in this case it really doesn't want the factory ROM but I need it to! I can quite easily get it into USB mode and flash it by running the .exe file on my desktop - but then that's about all I can do. I can't give it back to the customer as the next time he performs a soft reset or switches it off, it'll be back in Boot Loader...ARGH!
Oh, and apology accepted!
And another thing, I just tried running the exe file again and got as far as the screen alignment and the poxy thing just locked....cue soft reset and back to Boot Loader. Me not happy.
Edit: A quick check of the Hardware and all the buttons appear to be OK - nothing looks like it's stuck down
If you want to take the looooong road, perhaps you can do flashing Hard SPL, unlock SIM/CID and then flashing any other ROM/Radio. Once you get a stable working device, you can flash back the OEM using this method
I'm not sure if this custom RUU can help: http://forum.xda-developers.com/showthread.php?t=334890
I haven't tried that, so it's just an idea for now.
Thread closed.
If you are still having problems with the bootloader check out my sticky.
If you need help with the flashing process check out mskip's sticky.
Only create a new thread for new issues that have not been discussed before.
Good luck
Thanks
Dave
OK, I too skim read (I read a lotta threads ).
PDA-Princess
I've sent you a PM.
Dave

Read this before starting a thread, Most Question Asked are Answered

Mods can we make this a sticky to stop further irrelevant threads
Please categorize your question accordingly, Anaylize which forum to post it
Development forum is only for development of phone OS related stuff
Q- My phone is stuck and the android loading or the second screen
A- your ROM flash went wrong or some system files are missing
Remedy- Flash the ROM again or try flashing some other ROM, check your SD card if its inserted properly(If you have Linux-swap or apps 2 sd activated)
Q- I cant go past the first splash screen and i cant move into recovery or bootloader
A- Say goodbye to your phone, it is bricked.
Remedy- PM me maybe i can help you get a new phone (already got a new phone after bricking)
Q- I cant go past the first screen but can enter recovery or SPL
A- Your ROM is not flashed properly or check your SDCARD maybe its not inserted (SDCARD step only if you have apps 2 sd , linux-swap or data 2 sd)
Remedy- flash a new ROM, use nandroid and and try reformatting the ext partition
Q- My phone is slow
A- Your phone is overloaded
Remedy- Try wiping, removing some apps and increase linux swap
Q- Home screen reloads after quitting Application
A- Your RAM is not enough, phone quits Launcher or Rosie to make some RAM free
Remedy- Use or increase linux swap or try increasing swappiness
Q- Sdcard says update.zip not found
A- maybe you renamed the update.zip as update.zip.zip .If you have enabled show file extensions for know file types then rename it as update.zip and if not then rename it as update
Q- Which ROM is best for me/ Which ROM is the best for 32A/B?
A- Take some time on the forums, look at the ROMs available for your device and individually assess what works for you by reading the various issues affecting them and make a decision. If that still doesn't work out for you, hey, that's what makes XDA great, try a different one and so on, till you find one that YOU'RE happy with. It's very subjective since what my needs are could be totally different from what yours are.
Q-What will/is released, When will be released, New is released
A- Post is General Forum, leave this forum for Phone Development by Developers
Any other questions or suggestions welcome
Q- Which ROM is best for me/ Which ROM is the best for 32A/B?
A- Take some time on the forums, look at the ROMs available for your device and individually assess what works for you by reading the various issues affecting them and make a decision. If that still doesn't work out for you, hey, that's what makes XDA great, try a different one and so on, till you find one that YOU'RE happy with. It's very subjective since what my needs are could be totally different from what yours are.
Q- ADB doesn't find or see my device?
A- I suggest reading the Sapphire Wiki as it contains a lot of information about troubleshooting when you're stuck
Q- I have no data/ 3G connection
A-Check under settings ->wireless controls->mobile networks->access point names, If you have no APN set then add your carrier APN settings from this list here
anybody with a new no thread start wiki
charnsingh_online said:
...
Q- I cant go past the first splash screen and i cant move into recovery or bootloader
A- Say goodbye to your phone, it is bricked.
Remedy- PM me maybe i can help you get a new phone (already got a new phone after bricking)
...
Click to expand...
Click to collapse
Not 100% correct: if you can still load in fastboot mode (vol DOWN+POWER) you can still boot a recovery image and flash it on the device:
1. fastboot mode
2. fastboot boot myrecovery.img
3. (in the recovery) adb shell mount /sdcard
4. adb push myrecovery.img /sdcard/recovery.img
5. adb shell flash_image recovery /sdcard/recovery.img
myrecovery.img: whatever the file is called.
Bootloader is same as fastboot mode
Hey...
How do I know if I have a 32a/32b phone?
I've got a myTouch 3g and I just got it a month ago.
Is rooting illegal? I know it voids your warranty but do you get apps for free and stuff?
juiceaccts said:
How do I know if I have a 32a/32b phone?
Click to expand...
Click to collapse
Boot your phone into fastboot mode:
Power phone off
Hold Back key and power phone on
It will bring up a screen which either says
SAPPHIRE PVT 32B SHIP S-ON G
or
SAPPHIRE PVT 32A SHIP S-ON H
There will be instructions on the screen to power the phone off so you can boot as per normal.
elegos said:
Not 100% correct: if you can still load in fastboot mode (vol DOWN+POWER) you can still boot a recovery image and flash it on the device:
1. fastboot mode
2. fastboot boot myrecovery.img
3. (in the recovery) adb shell mount /sdcard
4. adb push myrecovery.img /sdcard/recovery.img
5. adb shell flash_image recovery /sdcard/recovery.img
myrecovery.img: whatever the file is called.
Click to expand...
Click to collapse
Yeah but charnsingh says, if we CAN'T go into recovery.. You're assuming we can
The post is a bit misleading, cos we don't expect physical damage to the device (in which case, you get to the first splash, but can't reach recovery.. i.e. your Back/Vol. down buttons don't work)
Q: What's Goldcard? and how to make a Goldcard
minhzc said:
Q: What's Goldcard? and how to make a Goldcard[/QUOTE
damm - i understand all, but what is a goldcard and how to create?
Click to expand...
Click to collapse
Goldcard, a special sd card that ur phone spl accepts, search the dream forum
Whenever I flash a new ROM I backup my data and apps using either Backup To Root or MyBackup Pro. When I reinstall my apps it never puts the apps back into the Market under my Downloads so that if the app developers update their apps it shows that there is an update. IN fac the only apps shown are the ones I've purchased.
What do I need to do, besides reinstalling each one individually, in order to have the Market get all my apps in the Downloads the way I want them?
Thanks
can someone explain what SPL refers to?
and then i hear terms like perfected SPL, eng SPL....
ive flashed some ROMs earlier...without worrying too mmuch about this SPL business, and now with a mandatory rogers update out, people are talking about SPLs (see rogers thread)
cheers
So what is an SPL anyway? What does it do?
The SPL, or Second Program Loader, is essentially the Android bootloader. It's job is more than just loading the Android OS - it also offers several other boot options, including Recovery mode, Fastboot, and HBOOT modes, and ultimately it's the SPL that allows manipulation of the flash nand on your device. Part of the SPL's job is to ensure that the data flashed to the device is correct. Most of the current shipping SPLs (apart from the "Perfect SPL's) let us flash a complete ROM image, but don't let us flash a recovery rom or boot image as it checks the verification signature. Haykuro has modified the SPL's available to remove this check and this is what the Engineering SPL's available offer. As the SPL is so crucial to the handset though, you have to be very careful when flashing it as if it's updated incorrectly then you may be incapable of restoring it without specialised hardware and knowledge. You essentially have a very expensive brick
Click to expand...
Click to collapse
From the xda HTC sapphire wiki
remap "search" button on MyTouch
I have searched the forum and only found results for the G1 or remapping the soft keyboard...
Can the search button (magnifying glass) be ramapped as hard key to the camera?
If this has been discussed and i missed it, links are appreciated.
If it's a kernel-level issue, i'm on enomther's TheOfficial 2.5.1 AOSP.
Thanks in advance
[Sorry mods if this isnt the right place to ask this, tired, at work and pretty much I was asleep at the wheel. Please move this to the appropriate subforum if need be. ]
if i download a rom using my phone can i rename it and apply it or do i need a computer. im already rooted and ive got the requirements for the rom already on my phone. i just want to know if its possible or not.
it will work without computer
ROM Development
Hi, I have been Googleing for a while now and cant find any info on how to remove my current Android keyboard from my current ROM and replace it with the Hero keyboard – does anyone have any links relating to ROM modification. I a have come across how to download the Hero keyboard and load it into your current setup but I kept on getting FCs plus I want to learn how to modify any part of a ROM not just the keyboard.
Thanks.
Does my new mytouch with the more ram and 3.5mm jack have an actuall name?
Hello, I recently purchased my first smartphone. The mytouch3g with 288 ram and 3.5mm jack. For two weeks now I have been researching about rooting and roms. Most of the info that i am reading/viewing is on the oringinal mytouch3g...does this stuff still apply to mine? Will installing a custom rom give me more ram? Obviously I am completely new to all this but I am finding all this stuff to be quite fascinating...Any help would be greatly appreciated.
Thanks
As a solution to the brick issue and not getting past the bootscreen or not beeing able to load fastboot or recovery here's a solution which I had tried on my magic after I lost all hope and it worked ..Thanks to God and google
while on the bootlogo screen stuck, insert your datacable. it will show fastboot in red color on top corner.
run the android sdk cmd from dos prompt and enter "fastboot boot recovery_image_name.img" provided you can find the appropriate recovery image for your phone.
after updating, it will restart and you will bt good to go

Please help!!!!

Hello all,
I followed the instructions provided on the cyanogen website to upgrade to 4.1.999 on my tmobiel my touch.
However once I got to the last step and needed to go to console and hit enter, I can not hit enter on my my touch!!!
I tried to hold down menu and all the buttons but nothing. The screen is just stuck in this position.
If I just take out the battery, will I brick the phone. WHAT CAN I DO???
worth to start a new thread? How about go back to the cyanogen thread and ask the question again? :-/
I tried searching through the thread, but it did not find what i was looking for and its 100+ pages, so i thought it would be easier to ask.
Sorry to bother you
Can I please get one question answered at least.
Would it be safe to remove the battery and try to get to the main menu?
Try asking this in the magic forum. This is in fact the dream forum.
must follow 4.1.99 directions first
abw1111 said:
Hello all,
I followed the instructions provided on the cyanogen website to upgrade to 4.1.999 on my tmobiel my touch.
However once I got to the last step and needed to go to console and hit enter, I can not hit enter on my my touch!!!
I tried to hold down menu and all the buttons but nothing. The screen is just stuck in this position.
If I just take out the battery, will I brick the phone. WHAT CAN I DO???
Click to expand...
Click to collapse
I bet you did not upgrade from 4.1.99 (which is required)......If you tried upgrading from 4.1.11.1 or any other, it gets stuck on the g1 screen......removing the battery is your only choice, and it should not brick the phone.....but you need to check your spl, radio and then follow the 4.1.99 directions (from cyanogen.com...you need to do three zip upgrades (first the original adp 1.6, second 4.1.99 and then finally third 4.1.999)
Start asking your questions in the right sub-forum (Q&A) (Theme) or even in (General), or simply search.......Final result will be a ban for you up too 3 days.
Thanks
Thread Trashed!!

[GUIDE] Noobs guide to Rooting and ROM flashing

Hello everyone,
I'm am pretty sure there are many guides in rooting your htc phone as well as flashing a custom ROM. I am also pretty sure that there are guides out there that uses BIG words with not enough Lament words, so here is a simple noob friendly guide to basically make your life easier.
1. Download and install HTCDriver3.0.0.007.exe from http://unrevoked.com/rootwiki/doku.php/public/revolutionary
2. Download revolutionary-0.4pre4.zip for windows from http://revolutionary.io
3. Extract it and run revolutionary.exe
4. Connect HTC Sensation to PC and select HTC Sync.
5. revolutionary.exe should detect your HTC Sensation phone and provide your with details about hboot and serial number.
6. select the hboot version and type the serial number into the box and hit enter.
7. It will now try to root phone. Wait and the phone will restart a few times.
8. When it's done, it'll ask to install clockworkmod recovery (cwm). Choose Y for yes or N to refuse. Install recovery based on what the ROM suggests. For ARHD, it suggested EXT4 touch recovery, so press N.
9. Press volume button up or down to navigate and select reboot phone by pressing power button.
10. Download EXT4 touch recovery at http://forum.xda-developers.com/showthread.php?t=1377759 (thanks to Madmaxx82)
11. Read the Read Me to learn how to install EXT4 Touch recovery.
12. Download firmware 3.32 for the related CID and MID. Be sure to check your phone's CID and MID
13. Download Super Wipe at http://xda.androidrevolution.nl/db_...ndroid_Revolution_HD_Super_Wipe_Sensation.zip
14. Download the ROM found at http://forum.xda-developers.com/showthread.php?t=1098849 (credit to Mike1986)
15. Copy the file PG58IMG.zip to the root of microSD. (root - meaning not in a folder)
16. Copy the super wipe and 6.6.3 ROM zip files to the root of microSD.
17. Power off your phone/ Remove battery from phone
18. Hold volume-down and power button simultaneously to get into bootloader mode.
19. When in Bootloader, it will automatically ask you to update your firmware, press 'yes.'
20. Once the update is complete, immediately take out your battery. (it may sound scary, but it's actually quite safe)
21. Take your MicroSD out and connect it to your pc to remove the PG58IMG.zip and insert it back once completed.
22. Get into boot loader once again (volume down + power button)
23. Now your bootloader screen should read:
-revolutionary-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.22.3504.07M
24. Select 'recovery' and it will automatically lead you into 4EXT recovery (the one you installed earlier)
25. Install 'superwipe' script.
26. Select 'install from sd card' and look for the Custom ROM you have copied into the root of your Sd card.
27. During the installation you will be asked the following questions:
-Do you have a TMOUS sensation 4g?.
-Do you want to flash the sony bravia engine support?.
-Do you want to flash Stock or Custom Kernel?
-If you picked custom then you will be given a choice between Faux or Sebastian Kernel
-Do you want to flash HQ camera?
Once again this is all your choice, please read up on what each of them does.
28. When the ROM is fully flashed select back
29. Select reboot from 4ext recovery
30. Done, enjoy ICS with Beats Audio, the first boot should take around 5-10 mins
HAVE FUN ROOTING AND FLASHING CUSTOM ROM NOOBS :-D
Just remember, do this at your own risk, I will not take any responsibility for you Bricking your phone***
Good job!
Prinz069 said:
Good job!
Click to expand...
Click to collapse
Thanks, just want other HTC sensation newcomers to enjoy their sensation just as much as i have.. Buying the sensation/xe is the first step.. Rooting and flashing ROM is the next step Cheers~ and happy rooting!
Some feedback to your thread
Hi, i wanted to give some feedback about this.
Regarding the content of your post, you might want to correct some things you've wrote that make the guide not so simply but confusing and inaccurate... sheer constructive criticism.
"Download firmware 3.30 for the related CID and MID.". If you are pretending to guide someone on how to flash any "newly" released ICS ROM you need to download and flash 3.32 firmware, not 3.30.
"This phone MID is modelid: PG5813000 and CID is cidnum: HTC__044. So if new kernel appear in the future, be sure to download from this category only.". You meant your specific phone, right?. Every guy out there has a different phone and more likely a different CID. There is a CID thread just in case you want to check out some of the available CIDs. Also, (and even more confusing) CID and model aren't related in any ways to kernel or firmware, what do you mean with "a new kernel appear in the future"? we have new kernels almost every 2 days from faux, sebastian, show-p and other developers, and what category are you talking about specifically?
In the third point you wrote It will now trying to root phone. Wait and the phone will restart a few times. Revolutionay tool is intended to S-OFF the device, not rooting. Then your guide isn't about how to root the phone as the thread title says ... i think this is the guide noobs are actually looking for.
If you are quoting or using content from others posts the correct thing to do is to give proper credit to the author i.e: Mike1986., authors of revolutionary tool, madmaxx among others.
I'm speaking for myself here and i want to ask you kindly to credit my work in the things you've pretty much copied literally from my thread [GUIDE][APR.16.12] How to flash ICS 3.32 firmware | flash/update ARHD 6.6.x ICS ROM, first post, steps 4 and 5.
I'm reffering to steps 18 to 37 in your guide which are 99% the exact same words i've wrote in my guide. I've spent some time and effort writing that guide, While i don't see why you wanna re-write my guide If you want to use my work it's ok, i don't mind, but please at least give proper credit and don't go around saying is your guide and your work when 50% of it's copy-pasted from my thread.
Also i've taken down the download link of 4EXT recovery touch flashing tool (steps 11 and 12 in your post) which i've modded and packed myself and it's also posted in my guide, if you want the dropbox download link i can give it to you, but again, proper credit.
You've open a thread in Android development section, and this is clearly not a development thread. Pleas ask a mod to move your thread to the correct section. Nevermind, thread has been moved already. Thanks to the mods.
Thanks
Couldn't agree more, it's not that we don't appreciate the effort but there are enough guides on this forum and all the info is there for grabs, you just have to find it. There's no need to create new guides because people don't use the search button.
Hello everyone.. Not that i wanted to copy any of your work and take credit for it, as i have never seen your guide.. I am sorry if i have offended you in any way.. I practically just wrote down what my friend told me over the phone, as he was explaining to me the proper way to root as well as put in a custom ROM on my sensation. I did not in any way meant or did not know that i was copying anybody's work. As far as i know, i only wrote this guide to help beginners, as i was once one. The only guide i have read was mike's guide on the front page of the ARHD thread, which at first i did not really understand. Another thing, it's not that i didnt want to give mike credit and take all the credit for my own, as you can see i am using's Mike's ARHD banner as well as i have given links to his thread. As for your guide, i will rephrase everything if it makes you feel better cheers mate~ The most important thing for me is to expand the sensation community.
Keupie said:
Couldn't agree more, it's not that we don't appreciate the effort but there are enough guides on this forum and all the info is there for grabs, you just have to find it. There's no need to create new guides because people don't use the search button.
Click to expand...
Click to collapse
Brother, if there is enough guides on this forum, why do new beginners always ask the same questions? ..well let me tell you my experience, understand certain guides is a bit difficult as they contain words not familiar to beginners. Once again, i made this guide so i wouldnt have to refer to anyone else's guide if someone else needed my assistance/help. cheers mate~
Would like to once again apologize for my premature posting of this thread. I should have asked my friend what his sources were. Thanks again all for the heads up
Keupie said:
Couldn't agree more, it's not that we don't appreciate the effort but there are enough guides on this forum and all the info is there for grabs, you just have to find it. There's no need to create new guides because people don't use the search button.
Click to expand...
Click to collapse
Well there is no absolute need, but then again he is free to do as he pleases.
If he (or ANYONE for that matter) is simply trying to help the noobs that come on here every day asking, "How i root plzzz help thx", then I am all for it.
But I don't think anyone should be denied the right to create these sorts of guides. Plus, the poorer written ones eventually die anyway, its the way a forum works.
Leemur89 said:
Would like to once again apologize for my premature posting of this thread. I should have asked my friend what his sources were. Thanks again all for the heads up
Click to expand...
Click to collapse
No problem, but next time read up a bit more, and be more precise. Also, remember to give credit to the required people, as somebody stated earlier.
Leemur89 said:
Brother, if there is enough guides on this forum, why do new beginners always ask the same questions?
Click to expand...
Click to collapse
Sometimes it's just sheer laziness. Other times they may not understand other guides or just need reassurance.
Either way, I appreciate you taking the time to create this.
Like i said, offcourse we appreciate the effort! What i'm trying to say is that people need to use the search function more. There are enough guides, If you don't understand something in the guide than ask it in the thread, no need to make a new thread about it.
Also, my experience is that If you use the search function enough, you will learn a lot about your phone and the ways to modify it. With that knowledge you can help other people. It's a vicious circle ;-)
Sent from my HTC Sensation using XDA
Simple way... just use hasoon2000's all in one toolkit from dev section
Im lost
OK guys, I have never rooted a phone but decided today to give it a try, why.. first cause I dont wish to wait till June for ICS and second becuase I saw this simple looking step-by step guide......so I thought simple.
First off I am PC savy but NOT at all cell phone hacking savy. All of this jargun you all use CID, MID, RUU, 4EXT means nothing to me and I have gotten lost.
I started with the instruction on this thread but then got the bright idea of seeing if there were some youtube step-by-steps how to's and there were. But the two videos I watched must have been older cause they had one major step differnt.
They say to type Y to Install recovery mod after S OFF, and I did. so now the next steps in the video dont work and I have veired off track what you all say to do.... I'm scared and lost.
I'm a realtor and my phone is my money maker, I can't brick it.
Someone help please.
Jerry
954-214-6104
Thanks!
Hey man thanks for the easy guide man! Helps heaps!
hortaja said:
OK guys, I have never rooted a phone but decided today to give it a try, why.. first cause I dont wish to wait till June for ICS and second becuase I saw this simple looking step-by step guide......so I thought simple.
First off I am PC savy but NOT at all cell phone hacking savy. All of this jargun you all use CID, MID, RUU, 4EXT means nothing to me and I have gotten lost.
I started with the instruction on this thread but then got the bright idea of seeing if there were some youtube step-by-steps how to's and there were. But the two videos I watched must have been older cause they had one major step differnt.
They say to type Y to Install recovery mod after S OFF, and I did. so now the next steps in the video dont work and I have veired off track what you all say to do.... I'm scared and lost.
I'm a realtor and my phone is my money maker, I can't brick it.
Someone help please.
Jerry
954-214-6104
Click to expand...
Click to collapse
Bro, i understand what you're saying.. haha trust me.. My only advice to you is.. If i were you and my phone was of great importance. Don't root your device.. Even if the process is quite easy and most of the time people don't brick their devices, there is still a small percentage.. The best thing you could do is update to ICS via official HTC release, which if i am not mistaken, has already been done in many countries. Cheers mate.
hortaja said:
OK guys, I have never rooted a phone but decided today to give it a try, why.. first cause I dont wish to wait till June for ICS and second becuase I saw this simple looking step-by step guide......so I thought simple.
First off I am PC savy but NOT at all cell phone hacking savy. All of this jargun you all use CID, MID, RUU, 4EXT means nothing to me and I have gotten lost.
I started with the instruction on this thread but then got the bright idea of seeing if there were some youtube step-by-steps how to's and there were. But the two videos I watched must have been older cause they had one major step differnt.
They say to type Y to Install recovery mod after S OFF, and I did. so now the next steps in the video dont work and I have veired off track what you all say to do.... I'm scared and lost.
I'm a realtor and my phone is my money maker, I can't brick it.
Someone help please.
Jerry
954-214-6104
Click to expand...
Click to collapse
Ok pal paste us a link to the video you followed. Now, does your phone still start up properly? If so then this should be easy. Power off the device fully. Remove the battery for around 20 seconds or so then reinsert. While holding down volume down also hold power until the device boots to bootloader. (Bootloader is equal to BIOS for a PC). It will give you some information. Post that Info up here. If it says s-off then using the volume buttons scroll down to recovery and push power. If you see a red triangle and/or exclamation mark then you have a stock recovery. If it says clockwork mod recovery then you are s-off with a custom recovery and all seemingly has went well
Also Cid stands for carrier identification and is used for carrier information and software I think. Mid is used to reference the country/ area you are in, for software as well as networks. They are both used together. Ruu stands for rom utility update and is a HTC program for updating HTC phone software and ext4 is a custom recovery that uses an exit4 partition on the sdcard I believe
sent from my android powered beast!
hortaja said:
OK guys, I have never rooted a phone but decided today to give it a try, why.. first cause I dont wish to wait till June for ICS and second becuase I saw this simple looking step-by step guide......so I thought simple.
First off I am PC savy but NOT at all cell phone hacking savy. All of this jargun you all use CID, MID, RUU, 4EXT means nothing to me and I have gotten lost.
I started with the instruction on this thread but then got the bright idea of seeing if there were some youtube step-by-steps how to's and there were. But the two videos I watched must have been older cause they had one major step differnt.
They say to type Y to Install recovery mod after S OFF, and I did. so now the next steps in the video dont work and I have veired off track what you all say to do.... I'm scared and lost.
I'm a realtor and my phone is my money maker, I can't brick it.
Someone help please.
Jerry
954-214-6104
Click to expand...
Click to collapse
oppps. XD guess i didnt answer your questions properly..sorry i misread.. The first thing we need to know is whether or not your phone can start up and does not just blank out when you turn it on.
Hey guys, thank you for the quick replies. Yes thank goodness it does power up.
ok here is the youtube video i followed, opps.
http://www.youtube.com/watch?v=kvg0i8in96M
All I got was to turn the phone to s-off but not rooted.
So yes the phone functions, but not my voicemails. It now say
"This phone was associated with a different account. Do you want to delete the exsisting voicemails?"
So I would like to proceed with the upgrade to ICS, unless becuase I am SUCH a noob you all think I should just some how revert back to S-on and leave my phone alone?
I just read here all the time, you should root, its SOOO easy... and it not if you are a noob..
Thank you all for your time, and I love this site.
Jerry
954-214-6104
hortaja said:
Hey guys, thank you for the quick replies. Yes thank goodness it does power up.
ok here is the youtube video i followed, opps.
http://www.youtube.com/watch?v=kvg0i8in96M
All I got was to turn the phone to s-off but not rooted.
So yes the phone functions, but not my voicemails. It now say
"This phone was associated with a different account. Do you want to delete the exsisting voicemails?"
So I would like to proceed with the upgrade to ICS, unless becuase I am SUCH a noob you all think I should just some how revert back to S-on and leave my phone alone?
I just read here all the time, you should root, its SOOO easy... and it not if you are a noob..
Thank you all for your time, and I love this site.
Jerry
954-214-6104
Click to expand...
Click to collapse
i cant see it being an issue bud firstly, i am yet to own this device (but soon! roll on payday ^^) so i can only take you as far as rooting and custom recoverys, but for ics updates youd best ask others go to this guide http://forum.xda-developers.com/showthread.php?t=1192300 and follow steps 2 through to 4 and then you will have a custom recovery, full root and supercid ^^ after that if you want to try an ice cream sandwich rom look
at the dev thread here. http://forum.xda-developers.com/forumdisplay.php?f=1112&order=desc&page=2 always double check that you understand what your about to do before you do it, and all threads *should* have full instructions on how to flash them. remember that installing a custom rom will WIPE ALL YOUR DATA so remember to do a nandroid back up from your recovery good luck pal and enjoy
OK guys, well I did not chicken out. I followed the video once again, but this time used my original stock SD card and everything worked. I am rooted! so now to the next steps...
wish me luck.
Jerry

[Q] update tmobile firmware with custom rom?

newb here. I just rooted, s-off, and installed a custom rom on my tmob htc one s as instructed in the thread linked below
http://forum.xda-developers.com/showthread.php?t=2250573
My question is in regards to "Complete Firmware From Update / Radio " as stated in the thread, I haven't done that part yet and I'm wondering if I need to. Everything seems to be working well and I'm wondering if it's a "if it ain't broke don't fix it" type of situation, or is there some underlying reason I should do it?
please forgive me if this is something obvious, I've done a ton of reading and searching the forums, trying to understand all of it.
If it turns out I should do it, can someone please explain this line in detail from the post linked above.
1. fastboot oem rebootRUU
Thanks
tacotim said:
newb here. I just rooted, s-off, and installed a custom rom on my tmob htc one s as instructed in the thread linked below
http://forum.xda-developers.com/showthread.php?t=2250573
My question is in regards to "Complete Firmware From Update / Radio " as stated in the thread, I haven't done that part yet and I'm wondering if I need to. Everything seems to be working well and I'm wondering if it's a "if it ain't broke don't fix it" type of situation, or is there some underlying reason I should do it?
please forgive me if this is something obvious, I've done a ton of reading and searching the forums, trying to understand all of it.
If it turns out I should do it, can someone please explain this line in detail from the post linked above.
1. fastboot oem rebootRUU
Thanks
Click to expand...
Click to collapse
If everything works as it should, there is no need to do anything else, as this is no problem for all devices, just some of them.
The fastboot command mentioned above switches your phone into a certain flashing mode, preparing it for flashing RUUs. Usually it's invoked by the RUU itsself, when the flashing process starts, but it also can be executed manually for some reasons, e.g. writing information to certain memory partitions of the phone.
tacotim said:
newb here. I just rooted, s-off, and installed a custom rom on my tmob htc one s as instructed in the thread linked below
http://forum.xda-developers.com/showthread.php?t=2250573
My question is in regards to "Complete Firmware From Update / Radio " as stated in the thread, I haven't done that part yet and I'm wondering if I need to. Everything seems to be working well and I'm wondering if it's a "if it ain't broke don't fix it" type of situation, or is there some underlying reason I should do it?
please forgive me if this is something obvious, I've done a ton of reading and searching the forums, trying to understand all of it.
If it turns out I should do it, can someone please explain this line in detail from the post linked above.
1. fastboot oem rebootRUU
Thanks
Click to expand...
Click to collapse
I had the same feeling as you. I'm running the same ROM. I ended up flashing the new firmware. I'm not sure if it made a difference or not, but I remember someone mentioning that it has potential to improve signal.
To flash:
1. fastboot oem rebootRUU
2. fastboot flash zip firmware.zip
3. do step 2# twice when you get an error.
Goodluck.
Nick

Categories

Resources