Hello,
i have installed iGo 8.3 on my TD2 and it works great. But when the phone is connected with my handsfree kit (Bury CC9060) there is no sound from the navi. It looks like the phone is muted.
Did anyone know a solution? I think it is normal, that i use the navi in the car and it is normal to use a handsfree-kit in the car!?
Thx
MyPass
Solved: I had to turn off the A2DP profile! Now it works!
Related
Hi,
I've got a problem with my carkit (O2 XDA-Carkit) after I upgrade to the new ROM-Version of T-Mobile (1.60).
With the old Rom-Version, the carkit works as a loadspeaker for all kind of sound. The voice-instructions from tomtom for example, came out of the carkit-speaker loud and clearly. Each kind of sound, the device made, came out of the speaker of the carkit.
Now, after upgrading to the new ROM, only the telephone works with the speaker of the carkit. With Incoming or outgoing calls I can use the carkit as usual...the speaker works and the mikro works also. But every other sound (e.g. tomtom voice-instructions) came direktly out of the speaker of the mda2 in a poor quality.
Some hints, how I could use my carkit again as a speaker for all kind of sound without goinig back to the old ROM ?
Any other kind of hints...maybe to use a bluetooth headset therefor (so that all kind of sound came out of the headset....not only telephone...I've got a Plantronics Headset...but also only the telephone works)
thx for help
best regards
rob.
Yep.......I have the same problem here.......don't know why they changed settings on the handsfree profile here.
Another thing you will find out is that the charging is very slow on the XDA carkit with the XDA II. If you run TomTom, Yeti and a bright screen the xda II will not charge, but drain!!
It has something to do with the wiring of the interface, but unless someone will come up with a solution I will go for a new carkit or a BT solution. (It's a bloody shame though it doesn't work properly with the XDA carkit! :evil: )
Hi,
the charging-problem is also a mess.
I think, the problem is only the GPS-driver from tomtom. In my tests, only when the GPS-driver is loaded, the battery-power goes down. With stopping the GPS-driver, the battery will charge again, but only, if the battery-power is more than about 75 - 80%.
If the battery is less than 75%, it will not charge at all, even if, there is no App runnung and the screen is off.
You said, you will go for a new carkit or bluetooth-solution. Do you know a carkit or bluetooth-solution, wich offers the feature, that all sounds (tomtom instuctions...etc.) came out of a loadspeaker or thru a headset (without connecting the wired headphone ;-)
As far as I know, at the moment all devices works only with the telephone-funktion....
best regards
rob.
Same here,
i have build my own carkit, and have put ground to pin 19,
sound was normally going though the connector to my car stereo
now it doenst anymore :evil:
I am sure this isnt a hardware thing it is software
could be the settings on the handsfree profile. on the xda2...
this is very very frustrating. just being finished with my carkit and now i cant use it anymore
also you cant set the phone to speakermode anymore..
I am sure this isnt a hardware thing it is software
could be the settings on the handsfree profile. on the xda2...
Click to expand...
Click to collapse
Does anybody know how to change this back?
I found that the registry points to a certain file in your windows directory: HandsFree_Dll.dll
(I found this here: HKLM\Services\Handsfree)
Can someone with the old 1.03 ROM please upload this file so i can try if this solves the problem...
TIA,
Max
Akira, Max :
I am building my own car kit, and have no success.
I do not obtain audio out with or without grounding pin 19.
I'm running Rom 1.60.00WWE.
Did you solve your problem ??
I must correct my last update.
I obtain audio when in phone mode, but not during playing waves or TomTom directions. Even Ring Tones do not go out trough the bottom connector.
So is it a software problem ?
Can it be corrected ?
Hello,
I have the XDA2 and in the car the Parrot CK3000, this bluetooth handsfree works perfect with my nokia telephone, but not with the XDA2.
There is any solution or I have to buy another handsfree.
Thanks
wait for the parrot 3300 see: http://www.driveblue.com/(f0gkmn45tjydzkbegxdagvvj)/Default.aspx?root=ck3300
renzie
Mine works fine. ~it did not at first as I nocked out all the o2 software on the XDA but after a hard reset and removing all o2 software except for "Ultra Profiler" which allows you to turn on the BT handset it worked fine
Sam
The solution seems to be to activate the "profile" in the today´s menu.
But the spanish instruction manual (TSM500) do not say anything about this. :evil:
I have to test it,
Thanks all.
Tested following:
Headsets
Sony Ericsson:HBH-610a: Works without any problems
HBH-IV835: Works without any problems
HBH-DS970: Works without any problems. Music-buttons(pause, play, skip) worked with pocket music(have not tested with any other), and the display on the headset shows the number calling.
HBH-GV435: Works without any problems
Nokia:
BH-300: Works without any problems
BH-800: Works without any problems
Others:
MBW-100: (Bluethooth watch) Will not pair
MTU TECH Virtual Bluethooth keyboard : Able to pair and discover services, but having some issues with the software that is needed for it to work... Will post a update soon
... To be updated.
Edit: Added BH-300, 800 and HBH-GV435
Audio
Motorola HT820 works fine
works fine on Samsung WEP200
Audio -
Works great with Motorola H700
Nokia HDW-3: works fine
Motorola H350 also works fine.
Compatability
Scala 700 works fine
Nokia hs-12w is also working fine.
With my SonyEricsson k800i I can use HID and control the P3600.
Plantronics 590A - perfect. It even switches from TV source to phone when somebody is calling. Previous/next track works. Redial works. All features fully work with Trinity. EXCELLENT
One strange thing though: I was listening to music on Trinity and paused it from the headset. After one minute Trinity went to sleep, screen went off. I pressed resume on headset and the music started again with screen remaining COMPLETELY OFF. However, a few seconds later the music stopped just when I was beginning to think I discovered a way to keep music playing with screen light off .
Next few tries whenever I press resume on headset screen starts and music resumes normally.
Successfully tested with a samsung WEP185 !
Motorola
H-350 - working great
H-500 - working great
HS-830 - working great
HT-820 - working great
Nadavi
neofix said:
HBH-DS970: Works without any problems. Music-buttons(pause, play, skip) worked with pocket music(have not tested with any other), and the display on the headset shows the number calling.
Click to expand...
Click to collapse
Music buttons work also with Windows Media Player.
Hi All,
I also have the DS970 bluetooth kit, and it works like a charm, but i have a question. Anyone managed to have the current music playing displayed on the screen? And the name of the called, instead of the caller id? Anyone?
thanks,
Luís
JABRA BT-320s Stereo Headphone.
I bought this 2 days ago and I struggled to connect it with the Trinity. Here are the problems I came up against.
1. Mono (not stereo) sound using Media Player (WMP). Found this registry hack in other threads ---> Set HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/[UseJointStereo = 0] (was 1 decimal).
2. WMP stalls briefly from time to time. From the same thread:
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/[BitPool = 45] (was 30decimal).
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/[MaxSupportedBitPool = 45] (was 30 decimal).
3. When handsfree to phone, the bt320s would drop out while the caller was connected. I tried a hard reset of Trinity in case there was a conflict with other software. This didn't help. I then found an undocumented way to reset the bt320s and that fixed it. It is now working well for listening to music, handling calls or using the Voice Speed Dial . To reset the bt320s:
a. Turn off the bt320s.
b. Connect and disconnect the bt320s to its charger 3 times leaving it on the charger for 3-5 seconds each time.
c. Delete the bt320s partnership on the PDA
d. Pair the bt320s to the PDA again.
Big thanks to all others on this forum and other forums for their help.
lmbranco said:
Hi All,
I also have the DS970 bluetooth kit, and it works like a charm, but i have a question. Anyone managed to have the current music playing displayed on the screen? And the name of the called, instead of the caller id? Anyone?
thanks,
Luís
Click to expand...
Click to collapse
Unfortunately these features are not supported.
I THINK that the A2DP profile doesn't cover sending music file metadata at all (I am not sure)
Thanks for your help, but i am curious about this functionality. Does anyone know if these headset show the song playing when used with a sony mobile?
thanks,
Luís
lmbranco said:
Hi All,
I also have the DS970 bluetooth kit, and it works like a charm, but i have a question. Anyone managed to have the current music playing displayed on the screen? And the name of the called, instead of the caller id? Anyone?
thanks,
Luís
Click to expand...
Click to collapse
This doesn't work with the Nokia HS-12W either on any of the Windows Mobile BT stacks and versions I've ever tested.
Did anyone successfully manage to listen to music via A2DP on the Plantronics Pulsar 260?
anonimo said:
Music buttons work also with Windows Media Player.
Click to expand...
Click to collapse
And with mortplayer, with coreplayer in a future revision and with 40th iplay.
By the way, I have a DS970 too, and when I receives an incoming call I can see the caller ID but then the handsfree hangs up. Do someone has the same problem? I have this problem when I'm listening music and when I'm only connected waiting a call.
G'Day ,
Just purchased the BlueAnt Micro X3 Bluetooth Headset for my Dopod D810. So far very nice, works extremely well, great range and no static. Only very slight echo. I will be sending Blueant an email to see if they have a solution or fix.
Here is a link:
http://www.blueant.com.au/X3_micro_Bluetooth_Headset.htm
The unit itself is very small, but comfortable a lot nicer than my previous Nokia 202 which produced a lot of static.
Regards,
BIQ
Hi,
I have an orbit 2 device which works nicely except a problem with my bluetooth car kit (sony ericcson HCB-300).
i can pair them and they make connection after that each time i get into my car but i cant use the voice dialing feature more then once or receive more then one call.
After the first incomig/outgoing call the car kit is unusable.
I found here some thread about afix to BT problem but it didnt work.
The voice commander works ok when the phone is not connected to the car kit.
Any suggestions will be appreciated.
looks like the problem was with the rom (khanx).
installed 3lit3 latest rom and now it works great.
Android Froyo, HTC Desire HD with Navigon Mobile Navigator.
I can connect the phone to my car stereo through Bluetooth. Everything works fine. I can receive and make calls and music routed through to Bluetooth perfectly. When I use Mobile Navigator the turn-by-turn instructions come through the phone speaker, then a second later they also come through the bluetooth connection to the car. The beginning of the bluetooth instruction is also cut off. I can't find anywhere to explicitly disable the phone speaker when audio is routed to Bluetooth, although other apps don't seem to suffer from this. Anyone know a hack?
Same Problem here. sound is routed through bluetooth and phone speaker while bluetooth is cut off. I assume the Navigon software has a bug here. I hope they fix it soon
unfortunately I did not find any workarround or fix till now
anyone?
I had a workaround using car UI by beemer. Unfortunately after upgrading to android 2.2.1 I can't make it work anymore but am not sure where the problem lies as even downgrading again through backup-restore left the same problem. I'd be interested to hear if anyone has a magic trick for producing the right combination of settings as I know this was working before with a 2.2.0 based rom and car UI.