Related
So I know this is a known bug from what other threads have said. In my case I don't even need to use the slider, but guranteed my phone sounds will all stop working at least once a day, even the vibrate does not work.
Soft reset solves the problem till the next time.
Should I consider reporting and getting my unit changed ?
I am testing one thing right now, normally I have my pushmail running 24x7, I think this might be the cause somehow. It's not direct push, its Oracle Pushmail plugin with works with pocket outlook.
Is this normal ?
Voicecommand is the problem, disable it and you will never have that problem again!
ok I will try this out and get back
that did not work, i disabled and left push email running overnight and sure enough in the morning the sounds no longer worked.
Tonight I will turn push mail off and see what happens I am pretty sure the sound will work in this case.
i had this issue earlier this week and i've seen numerous threads about other having the same issue. NO true, duplicated scenario or solution has been found (or i haven't seen one). After several soft resets i had to do a hard reset and reinstall everything. That was the only way i got the sound back.
so in your case are you saying a soft reset did not bring the sound back ?
in my case soft reset always brings the sound back.
I have kept my email turned off and so far no problems with the sound, I think mine has got something to do with oracle pusmail plugin, which is a real pain as I need that.
Unless this occurs in a clean device [no installed 3rd party apps] it might be a software issue. Maybe you should try and weed out the offensive app/s?
So I know which app causes it, for me its the oracle pushmail plugin for outlook that we get from work, but I can't really remove this, after all this is the reason I have this device :-(
When you lose the sound on your device does the camera also die at the same time?
Will have to check that out next time. I have had the camera go a few times, needed to soft reset. Next time the sound goes I will check the camera and report back.
Camera was ok when the sound went.
Are you SURE you have voicecommand COMPLETELY disabled? (NO checkmarks on NO options AND!!!! NO SHORTCUT TO VOICECOMMAND ON ANY BUTTON)?
Regards,
Ingo
Will have to try again, today I noticed the voice command was enabled, very weird I never set it on.
Will see how it goes this time.
OF COURSE!
The sound goes away.... it also came back once, without softresetting. I am not sure the VC is directly connected to this... I spent a good amount of $$$ to buy this phone for my wife, on the wave that she loved the 650... but what a bad idea!! Is something going to be done in order to fix all these bugs? By the way, my 750 is unlocked, but I guess it doesn't make any difference, or does it? Thank you guys, Paul.
If I checked TTY/TTN in phone options, all phone sound ceased. Uncheck and its back. Nothing in Help about this feature - what is it?
Chris
the innocent Treo...the silence of the Treo...
Waht is it? It is a shame!!! After almost one year that this model is out, still no fix for the problem! I spent $600.00 for this phone...it is really a shame.
iloveheat said:
.. I spent a good amount of $$$ to buy this phone for my wife, on the wave that she loved the 650... but what a bad idea!!
Click to expand...
Click to collapse
Funny - same here. She loved her TX, I bought her the 750.
Ringer gone. Comment "Isn't ringing a basic feature of a phone honey?"
Just had to hard-reset, all others failed.
Not nice.
Same story here. She loved the 650, it got to the end of its life, so I bought her the new 750. Even worse, it doesn't even vibrate for her....lol...
Silent 750
Seems that a lot bought the 750 for the wife.
Even more reason to get the sound issue fixed
Any news yet on this - any word from Palm?
Every day i have to reboot my phone, even when i receive a call the phone don't vibrate.
Is there any mortscript that screen on screen off the phone when you receive a screen ?
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just have to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
Click to expand...
Click to collapse
Tweaks enough around
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
Click to expand...
Click to collapse
I don't have that problem?
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
never had that either
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
Click to expand...
Click to collapse
try this solution
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
Click to expand...
Click to collapse
Did you try a different alarm already?
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
Click to expand...
Click to collapse
Don't have that problem
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Now you mention it, yes, that is annoying... Would love to see a tweak for that as well!!
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just has to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
A lot of these problems though, are mentioned throughout this forum, and can be solved. Either by ROM updating, or tweaks... What Rom are you running?
I understand completely. I feel differently though. My TP is the best phone ever. The issues I have were seen on my previous devices (HTC devices for the US). The faster processor, increased storage, and TF3D make me happy. Don't get me wrong, I have cussed at this phone, missed inportant business calls, and missed a flight thanks to the alarm. I soft reset 1 - 5 times a day to proactively minimize these issues. But overall, the TP is a huge improvement over my Wing. So long as my new devices are improvements to the one before, I am happy. I can't live with a standard cell phone, and love my Raphael.
joeltje said:
I don't have that problem?
Click to expand...
Click to collapse
Try calling your phone from a land line phone.. how long does it take before your cell actually start ringing?
joeltje said:
Did you try a different alarm already?
Click to expand...
Click to collapse
Yes, but it happens so rarely I can't say if its the sound. Besides, it's the rooster sound that came with phone. No matter what it should never happen. It happened on my TYTN II too.. So I guess it's probably a windows thing.
joeltje said:
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
Click to expand...
Click to collapse
Hmm.. I might try that.. but I often see people start having entirely different problems with their phone then (lock ups and strange behaviour). If there is a stable ROM that fixes these issues and doesn't break down hard once every week. I'm all for it!
I'm running the standard ROM that came with the phone. Ver.: 1.90.403.6 DAN (Danish) ROM date 08/23/08, Radio: 1.02.25.19, Protocol: 52.33.25.17U
If I call my cellnr. from the home phone, it starts ringning as quickly as all my other mobile phones... So no, I really don't have that problem, thoughj I did just see another topic from somebody with exactly you problem: http://forum.xda-developers.com/showthread.php?t=432415
You might want to follow that.
On the alarm, I have 2 kids, so I don't use an electrical alarm Sorry...
The different ROM may be something you can test at least. It fixed a lot of annoyances for me anyway. Look in the Wiki for different Custom Roms, there are a couple out there, and for me, DCS worked best. You can always go back to original, should you not like the ROM. I'm running DCS now for three days, no resets, and it is still fast....
ssndk said:
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
The issue above really annoying. Normally that will cause my TP to go mute and can't hear each other. Have to soft reset. This issue is discuss in another thread here. Since I'm overseas for at the moment, can't go complain to my vendor.
ssndk said:
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
joeltje said:
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
Click to expand...
Click to collapse
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
you can extract the stylus but the you have to juggle around with it OR you can press the standby button on top to unlock it. It's a pain I know but the problem is that it is a touch screen so pressing a button to unlock is less worse than without it.
So functionality actually remains as it is now... That's good, I'll give it a try!
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
It unlocks when the stylus is extracted..
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
ssndk said:
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
Click to expand...
Click to collapse
Try SensorLock. It's a great little utility that unfortunately has stopped working for me. Must be something I poked somewhere. lol
As for the alarm, mine works fine... but I do notice the ringing a couple of times on the sending end before the phone starts to ring. I'd sort of passed that off to a network thing, not a phone thing.
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Quote:
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
TRY G-Alarm. It works well for me.
Klaxon (sp?) alarm looked cool and would have also been practical, but it would crash - totally unreliable.
[email protected] said:
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
Click to expand...
Click to collapse
No, in my TPro the delay is exactly the same (oviously using the same mp3 file in memory card or in the device)..i've reduced delay sound installing Diamond tweaks and setting "without delay" in ring tone..then i've erased diamong tweaks because use too much battery now i have only 1 ring with light (and identified call incoming on the screen) and without sound, and BEFORE the second ring my device correctly sound
bugsykoosh said:
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Click to expand...
Click to collapse
If your referring to this one,
108-Allow users to disable the 3 seconds delay between rings in devices with Windows Mobile Phone Edition
Click to expand...
Click to collapse
see the following thread at PPCGeeks.
If your talking about the fact that the NAV wheel starts flashing 5 seconds before the audio starts playing, then it's not the same scenario.
ssndk said:
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Click to expand...
Click to collapse
I have a HTC TouchPro and had the same issue of not wanting to press the long press end key for 5 seconds to lock the phone. I tried the code you gave and unfortunately the phone still does not lock when I push short press the power button to turn off the back light and put th phone in sleep mode. I really want this to work since when I am driving, I think when I go through good and bad coverage areas, the phone will automaticallly wake up about 3 times each way, so if it is not locked, I can accidentally call people while driving.
Hi guyz,
Googled it with no real solution, nobody in the Touch Pro forum seem to have it either.
Is there any way to disable waking my ppc or at least lock the touch panel on notifications like low battery, appointments etc. Message notification is easy to disable, Answerkeys Disabler works like charm when it comes to incoming calls but I want to disable waking up the device on any notification and have only audible alerts.
Often when in pocket or case my TP wakes on low battery or appointment reminder and starts random dialing, texting, etc. which is getting annoing.
Thanks in advance,
dEM
there may be a registry key you can delete so that you don't get notifications at all.... i'm not real sure about which ones though. i'll look around.
EDIT: SHNotificationRemove at msndn :
http://msdn.microsoft.com/en-us/library/aa455968.aspx
Good question,hope someone has an answer
how about usin s2u2? doesnt solve it exactly but maybe a workaround?
There are some locking solutions over there. I'm looking for one that doesn't lock my device all the time but only on these notifications. The best will be if it doesn't even wakes up.
Just great! More than a month I've been trying to find a solution to this problem with no success!
Hi,i hope this keeps the thread alive,i would also like to know if its possible and how
Me Too!
I have this exact same problem. When a reminder alerts me on the phone it wakes up the unit and turns the display on. If this stays in my holder it just keeps the phone on because it senses all the pushing... We have a PIN enable so it won't do anything major. But there are times I've pulled out my phone to find it awake (on) and there are * in the password field - so I know it is sensing touches when in the holder. This definitely drains the battery.
HELP PLEASE! Any Fix found?
I'm having this problem as well - anybody out there got any ideas...?
I hate how there seems to be no solution to this! It didn't happen to me in WM6.1, so it must be buried within 6.5 in some dark, fetid, unreachable place :-(
I keep accidentally dialing people with my bum when one of my reminders goes off. Grr!
EDIT: I did finally cave and install a slide to unlock feature (S2U2) which I got from http://a2-s2.com. I was surprised with the level of customization you can do with this program, and I do love how I can have the slider's wallpaper change randomly, so I am greeted with a different image each time I unlock the phone. I know it's not what any of us were looking for, but it's a workable solution for now.
I've since gotten round this by using PocketShield - works well for me. Doesn't work well with the PIN lock though....
I'm using Smartlock for locking the screen; incoming call and stand return from suspend.
It has an option "suspend after lock".
http://forum.xda-developers.com/showthread.php?t=505032
disable wake on notification
finally figured it out, a few years later.
still can't find a factory setting for it, but i downloaded NILS (notification lock screen) and it gives you the option to disable wake on notification. hope it helps
[2 deep breaths]...
Okay, I have searched it but there was no answer corresponding to Atrix 2.
A call is coming and I want to silence it. I will not cut it because I dont want caller to know that I deliberately cut his call. In E71 there if I press right menu button, i can silence all calls (which stops vibration + ringtone in between). How do I do it for Atrix 2? This is not for all callers, I should be able to decide whose call I want to silent at that particular moment.
I dont want temporary/workarounds like keep it in silent mode/press volume button all the way downwards, etc. Thanks.
Press power button. Silences the call and locks the screen with out hanging up.
Motorola lied and I'm still locked mb865
xdduser said:
[2 deep breaths]...
Okay, I have searched it but there was no answer corresponding to Atrix 2.
A call is coming and I want to silence it. I will not cut it because I dont want caller to know that I deliberately cut his call. In E71 there if I press right menu button, i can silence all calls (which stops vibration + ringtone in between). How do I do it for Atrix 2? This is not for all callers, I should be able to decide whose call I want to silent at that particular moment.
I dont want temporary/workarounds like keep it in silent mode/press volume button all the way downwards, etc. Thanks.
Click to expand...
Click to collapse
Just Press the volume up button once when you are getting a incoming call it will silence the ringer.
Next time, instead of starting a new thread please post your further questions in this thread only, we would love to help you.. but instead of starting a new thread for each question, put all your questions here.. no offense or no ill intent, just to keep the site clean
Sent from my MB865
Question:
I dont know who deleted my post which said that my screens automatically shuts off. So i adjusted my screen timeout to 1minute. But still the screen turns off after 5 seconds. This is very annoying because I keep my phone on table, reading something on it, and suddenly the screen turns off after 5seconds. Help !
xdduser said:
Question:
I dont know who deleted my post which said that my screens automatically shuts off. So i adjusted my screen timeout to 1minute. But still the screen turns off after 5 seconds. This is very annoying because I keep my phone on table, reading something on it, and suddenly the screen turns off after 5seconds. Help !
Click to expand...
Click to collapse
Perform a factory restore it will resolve your issue. Go to settings/privacy/factory data reset.
xdduser said:
Question:
I dont know who deleted my post which said that my screens automatically shuts off. So i adjusted my screen timeout to 1minute. But still the screen turns off after 5 seconds. This is very annoying because I keep my phone on table, reading something on it, and suddenly the screen turns off after 5seconds. Help !
Click to expand...
Click to collapse
Please read the rules for XDA:
http://forum.xda-developers.com/announcement.php?f=1058
You just hijacked someone else's thread, and asked an off topic question. You have shown several times now that you have not read the rules, so please go read them.
xdduser said:
Question:
I dont know who deleted my post which said that my screens automatically shuts off. So i adjusted my screen timeout to 1minute. But still the screen turns off after 5 seconds. This is very annoying because I keep my phone on table, reading something on it, and suddenly the screen turns off after 5seconds. Help !
Click to expand...
Click to collapse
Make sure in pocket detection is off
Motorola lied and I'm still locked mb865
xdduser said:
Question:
I dont know who deleted my post which said that my screens automatically shuts off. So i adjusted my screen timeout to 1minute. But still the screen turns off after 5 seconds. This is very annoying because I keep my phone on table, reading something on it, and suddenly the screen turns off after 5seconds. Help !
Click to expand...
Click to collapse
I am thinking of simple things first, make sure that you are not on maximum battery saver mode. Go to settings --> battery and data manager --> battery mode --> select the performance mode..
See if this solves the problem.. if it doesnt then let me know if you have installed any battery miser kind of apps.
Sent from my MB865, still running on GB
Ok, will try that. Meanwhile, other issues:
1) I downloaded the facebook app. But it never logs in. It keeps on saying "loading". Similarly, when I try to sync social networking app/widget, youtube doesnt sync. It says "youtube sync failure". Why is that?
2) I recieve an SMS containing a mobile number. In E71, I could select the number and save it to a contact. This is not possible in Atrix 2. When I recieve an SMS containing a mobile number, there is no option to save it. This is the basic requirement of an SMS. Any ideas?
xdduser said:
Ok, will try that. Meanwhile, other issues:
1) I downloaded the facebook app. But it never logs in. It keeps on saying "loading". Similarly, when I try to sync social networking app/widget, youtube doesnt sync. It says "youtube sync failure". Why is that?
2) I recieve an SMS containing a mobile number. In E71, I could select the number and save it to a contact. This is not possible in Atrix 2. When I recieve an SMS containing a mobile number, there is no option to save it. This is the basic requirement of an SMS. Any ideas?
Click to expand...
Click to collapse
1) Its not the problem with the mobile, its the the issue with facebook ap.. and facebook android app is quite infamous, try something like friendcaster
2) long press on the mobile number in the message it will give you an option to create a contact
Sent from my MB865, still running on GB
Pattern lock?
Is there a pattern lock feature for A2 like in case of galaxy s2 and iphone? If yes, how to enable it? All I have is number/passcode lock feature. In IPhone, the passcode is 4 digits and after that we dont have to press enter key, but in A2, i have to enter passcode and then press enter key (which is too much of extra pain).
Settings --> location & security --> setup lock screen --> pattern
Just dig into settings you will find everything you want.
Sent from my MB865, still running on GB
techsavvy.jaz said:
Settings --> location & security --> setup lock screen --> pattern
Just dig into settings you will find everything you want.
Sent from my MB865, still running on GB
Click to expand...
Click to collapse
Pattern option is "disabled by device administrator".
I see what is happening here. Since I had setup my phone to use my office email, i have having such problems like screen automatically shutting down and inability to use pattern lock !!
Thats my best guess.
xdduser said:
Pattern option is "disabled by device administrator".
I see what is happening here. Since I had setup my phone to use my office email, i have having such problems like screen automatically shutting down and inability to use pattern lock !!
Thats my best guess.
Click to expand...
Click to collapse
yes, that is because you are now forced into a corporate security policy. No way around that unless you stop using your office exchange account on your device. an easier way is to forward your mail to gmail, and setup a way to do this over https. This is all on the gmail site, so don't ask how to do it in here.
xdduser said:
Pattern option is "disabled by device administrator".
I see what is happening here. Since I had setup my phone to use my office email, i have having such problems like screen automatically shutting down and inability to use pattern lock !!
Thats my best guess.
Click to expand...
Click to collapse
This should have been the first thing that you posted, little info like this my friend is vital..
Android gives you freedom, use it and start exploring.. it doesnt mean that people here dont like noobs, everybody here started pretty much as noobs, i still consider myself a noob. But what everybody expects here is, do your bit before asking questions.. explore the your mobile, search the web, even then if you cant figure it out, then search the forums even if you cant find it then post your query.
No offense and sorry if i may have hurt you..
Sent from my MB865, still running on GB
explore
All u hv2 do is to PLAY with ur fone dude ....
xplore everythin .... make mistakes (only when u hv powerful tool of flashing back ) ... try each n every settin
mistakes make u learn faster (not @all intention of lecturing u :laugh: )
So I installed a new sandisk 16gb card microSD card yesterday (after formatting it first in PC, then in phone) and put some songs in it. More problems started:
1) Randomly, the phone says "no sim card". I have to restart the phone to get my sim card working. This is frustrating.
2) When I woek up in morning, the phone was dead. Something drained the battery to 0%. Why?
3) The notification was automatically set to some random song. Why?
Have you tried taking out the memory card.. see if it solves your problem.. though few things are strange in your case, but take out your new memory card out.. and pls dont ask why because there are already ample threads on "class 10 memory cards not working with A2"
Sent from my MB865, still running on GB
I paid attention that lately it took several seconds, I think more than 5, to wake up on incoming call. It means that i can here the ringtone of incoming call, but screen is off and some times even if the screen is on it takes up to 3 seconds to the phone app to appear with a possibility to answer or reject the call. Does it happen only for me?
so far i would say yes, cause i never faced that strange behavior on any of my Xperia's
DanielMode said:
so far i would say yes, cause i never faced that strange behavior on any of my Xperia's
Click to expand...
Click to collapse
Thank you. For some reason right now the time of the appiriance on screen became less than 3 seconds, but still looks like some delay... Have no idea how that happened...
I Had the same Problem with my old Xperia 5II. I have tried New sim card, sd card, factory reset nothing was working. I have changed the Phone with a New one and Had no more problems with this.
But this Was Not the only Thing on my Xperia 5II. If i become an incoming call 2 or 3 times in short time my 5II restart completly and If i taked a call i dont See for a long time the call screen.
I Hope You Can understand me, because my English ist Not the yellow from the egg
Edit: i think only change the Phone Can help you
Rather late reply, but I'm just a new user of the device. Yes I have the same issue. Call comes, but screen remains black. Takes way too much time to allow me to answer the call.
Don't you face the same issue when you try to unlock it/wake it up? It takes a lot of time for the screen to wake up, even if I try to push the power button multiple times. Fingerprint does not get recognized during this time either, no vibrations at all.