Disable internet connection - Touch Diamond2, Pure Themes and Apps

Hi I'd like to use only wi-fi instead of 3G which turns on whenever I'm not in wifi areas. Is there any way to turn this **** off?
//it used to work well, but after hard reset it connects into HSDPA/3G instead of saying that there is no way to connect.
Alright, I've found a sollution.
The progs name is nodata - works perfectly.

Related

No internet via wifi?

Hi guys,
I've recently become the proud owner of a vodafone touch pro. However when connecting to wifi, opera etc will not find any webpages. Now i know my wifi is working and the phone connects fine and picks up the DHCP ip address.
What could I be doing wrong? I've noticed data connections is disabled but I believe this is just for GPRS etc? Either way how can I confirm my wifi connection is being used?
Many thanks
EDIT - NM it was because it was not set to work
Hi Scribe,
I had the same problem as yours. No solution so far. Had no problem with GPRS.
I have mine working good on either wifi or GPRS.
Probably it's wifi problem? Have you tried on another wifi connection?
what was not set to work?
I have the same issue, connects to wifi but no internet. laptop connects and browses fine, but touch pro (and also diamond) don't
Make sure when you set your wifi connection up you say that it is used to connect to work not the internet, also make sure your adapter settings say this.
The problem is that the phone will always default to GPRS/3G for the internet but if it senses a local work network it will use that first.
Stupid I know!
I have the same prob, I changed some settings and it works. Try change Authentication to Shared instead of WAP-PSK, Data Encryption to WEP instead of TKIP. After you have internet connection, you can change to previous wifi settings with same network key.
Mine has gone again! I swear it's because 'Connects to the internet' wont save in the proxy settings - nope not that and still wont work, I've also tried by disabling all security

priotize w-lan for internet connetions

-Does anyone know how to priotize w-lan for internet connections?
It seem that my phone always uses the mobile connections (GSM, 3G etc).
In menu for connections where internet connections can be created, I can't find anyting about w-lan.
This is something I've been meaning to ask about while I wait for the Fuze. By way of background, I have a Cingular 8525 with the original (WM5) ROM, and it drives me nuts using it at home. I only get EDGE inside my house, but the stupid phone persists in making an EDGE data connection instead of using the nice, fast Wifi connection that I just enabled. I use NoData to make sure it doesn't connect via EDGE or 3G, and then half the time it says it says that it can't connect -- even though the icon says that it is connected!! The only way I can reliably connect via Wifi is to go briefly into and out of flight mode, then turn on Wifi before connecting.
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
it should be accessing wifi first by default i believe...unless other connection is already connected
Hello!
Start first the WiFi Connection and then the Internet Explorer or Opera.
pjo12345
There's this stupid thing with wlan connections in WM - if connection type is set to 'Work', you can browse through files on other computers in (W)LAN at home, but any Internet connection wll be realised through GRPS/3G. To make it connect to the Internet using WiFi, you need to switch wifi type back to 'Internet'.
Maybe that's the thing?
Is there a way how to setup that the WiFi is connected to both (work AND internet)? I never saw WiFi connected only to work network... I assume there is no way but why not to ask ;-)
I know that many others have problem with that, but I didn't find any solution yet...
Because when I set it as work, my Exchange sync is working but no Internet, and when I switch to Internet, opera and QuickpGPS is working, but no Exchange sync (it is trying to open VPN connection because I need to go though inside address to the server because certificates and of course it cannot get it). Or I need somehow set that no VPN will be dealed on this WiFi network...
I need something like BOTH or Auto option.
It seems to be switching from Wlan to G / 3G / H when the signal is not that great. Mostly with the weather tab and Opera. Quick GPS works fine. The way I make sure it is on the internet through wlan is to shutdown the telephone and keep the wlan on with comm manager. The disadvantage is that anyone calling will be heading to your voicemail. Another option is to use the "Nodata" program, en disable to internet connections.
On Touch Pro, I usually just go to COMM MANAGER and switch on wifi and switch off data connection. It is only a couple of quick steps and saves battery, since you don't need both on, if you only want to use wifi.
I am sure there must be a more seamless solution, but I like easy fixes.
wmm said:
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
Click to expand...
Click to collapse
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
I got an other problem with wifi. When I establish a wifi-connection and pull my mail the ppc still connect with a data-canection and didn't use the wifi. My kaiser used the wifi-connection for that.
8notime said:
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
Click to expand...
Click to collapse
I wrote the original post before I had a chance to try it for myself. I've had a Fuze for three weeks now, and it works fine for me. I turn on wifi and the Fuze uses wifi. I turn it off and it goes back to normal wireless. (I did do the registry edits to turn on the HSDPA stuff in the connections tab and enabled the modified connection icons in the menu bar. I don't know if that had any effect on this issue or not, but it does what I would expect now.)

Problems with BT, AS, and WiFi while connected to 3G

I've been triying to figure this out for awhile but here's the basics of what's going on:
I have a Japanese HTC Touch Pro, (and yes EVERYTHING is in Japanese, but this doesn't really bother me.) We don't have MMS over here, so we use a constant 3G connection and mopera U to push email to the phone.
So, when i'm in my Comm Manager I have a Data connection on as well as the phone connection.
If I try to turn on my WiFi it will turn off after 3 seconds (just enables it and disables it)
If I try to use my bluetooth connection, same thing (enables BT, then turns it off again)
If I connect my phone to my PC via USB it will try to connect at first, but will suddenly disconnect after a few seconds.
Well, I figgured out that Active Sync won't allow the connection while the phone portion is turned on. Easy enough, I turn my phone into flight mode and it connects just fine and syncs. While this is a tad retarded, I will accept it.
However, In order to get bluetooth to work, i need to disable the 3G connection. Now.. here's what I don't like:
I *HAVE* to have my data connection for email/internet or anything. But, the phone will only seem to allow either the Data connection through the 3G OR bluetooth/wifi, not both.
Now, if I have BT enabled first, then try to establish the data connection I get an error telling me it cannot connect to the 3G network, same effect though, it will try.. just won't allow it.
What really makes me mad is i'm not wanting to have it networked to anything, I just wanna pair it with a headset so I can listen to the mp3 player while on the train and send out emails from my phone.
I tried calling HTC (good help that was) about it, and they suggested hard reseting the phone, soft reset, ect ect.. There's not really a problem, i'm sure there's just a setting somewhere to allow the multiple connections at one.
Does anyone know of any tricks or ANYTHING I can do so I can use my phone the way it was intended?
Did you ever find an answer to this? I am having a similar problem with my Fuze. When bluetooth is enabled, eventually the phone begins to refuse to open a data connection. :-(
No, i never found an answer. I'm not tech savvy enough to find it out.
But its REALLY annoying. I just want to use my USB headset, not connect bluetooth to any network or route messages that way.
Not sure if this is the fix to your problem, but this helped me when Wifi kept turning off, its a setting in WinMoDevCenter, it stops all data connections when connected to sync
in WinMoDevCentre go to Mobile Device settings -> Connection Settings -> Allow Data connections (last check box)
after that i was able to use wifi while plugged in just fine

GPRS and WiFi auto-connect/disconnect troubles

Even though WiFi is up and running, my phone keeps getting connected via GPRS automatically. Although most programs use the WiFi connection, sometimes they switch over to GPRS. Also, when I reboot the phone, WiFi gets deactivated and GPRS kicks in automatically. Of course, this is a bad thing since my carrier allows only 1MB of downstream on GPRS.
The other problem is that WiFi keeps getting disconnected after a period of inactivity. Now I don't mind this happening as it saves battery, but I don't want this to happen when I'm at a place having access to a power source. Strictly speaking, I could live with the WiFi getting disconnected, but the irritating thing is that sometimes it just doesn't reconnect - instead, a baloon pops up informing me of all other wireless networks available - my network isn't listed! Then after a few more minutes, it automagically connects to my network. Sometimes, to get the wifi to connect, all I have to do is click on the "G" icon (I'm about to open the wireless manager) and the WiFi starts to connect! Just w.t.h is going on here? :S
Now the common "solution" for the GPRS problem that's floating around the net is to use a program that disables the GPRS connection, like Modaco NoData or such, but I'm looking for a more permanent solution (regtweak?) by which:
1) GPRS is never connected and if connected, never used by any program IF there's an active WiFi connection
2) When the phone (re)boots, WiFi should be activated and if any "known" networks are found, should connect to it automatically, else it should be deactivated
3) Perhaps WiFi/GPRS can be enabled/disabled based on the cellid/GPS and/or time schedules? Now I know of programs that can do this, but I'm looking for something extremly light, preferably which doesn't have a GUI and/or runs as a service and can be configured by xml/ini/reg (or maybe have a seperate GUI for settings)
Any ideas people?
Thanks for your time.
Did you ever find a solution for this? I'm in the same boat and would like to know as well. Thx.
Yeah, I changed phones. Didn't face this issue on a Diamond and a Hermes.
got the same problem with my tg01 keeps dropping wifi and keeps connecting to gprs when wifi is on

Turning off automatic internet connection

I would like to make my Touch Pro not connect to 3G/Edge internet automatically whenever I momentarily lose my WiFi connection. The reason is, when Opera goes fullscreen, the taskbar is not visible anymore, so I'm not aware that surfing costs me real money.
Is there a way to do it? Please help.
You could use modaco nodata, it turns off data connections alltogether. It shouldn't turn off wifi if I'm correct, but I never use wifi.
settings->connections->connections->advanced->select network
choose my homenetwork in the dropdown rather then my isp or
what ever it's called with your setup

Categories

Resources