Hi guys,
I've just installed the Windows 7 ultimate RC on my PC and am now unable to sync my Raphael. I've installed Windows Mobile Device Center, but when I plug in my phone I get a message saying 'USB Device not recognized'.
I've tried both the stock rom and the Energy 3.0 ROM.
Anyone experiencing this also? Any solutions?
Thanks!
Same problem. But I couldnt even install the WDC? Which version did you install?
Weird
I'm using Windows 7 RC 1 (build 7100) and it works flawlessly with my TP. Installed WMDC 6.1 without difficulties.
PROBLEM FIXED for me
zonez said:
Hi guys,
I've just installed the Windows 7 ultimate RC on my PC and am now unable to sync my Raphael. I've installed Windows Mobile Device Center, but when I plug in my phone I get a message saying 'USB Device not recognized'.
I've tried both the stock rom and the Energy 3.0 ROM.
Anyone experiencing this also? Any solutions?
Thanks!
Click to expand...
Click to collapse
Try deleting this via regedit
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions
I'm using Windows 7 build 7077 and everything is going fine
Could you specify as to whether that key is located in Windows 7 or your phones OS?
brycestejskal said:
Could you specify as to whether that key is located in Windows 7 or your phones OS?
Click to expand...
Click to collapse
Sorry.In Windows 7
uh oh. i'm thinking of wiping vista from my machine and just using rc1. should i hold off on doing this?
Happened to me not 5min ago
1. Find the device in “Device manager” and remove it
2. Re-Plug in the device
3. A windows should try to install the software (Little popup in the task bar)
4. Click on it when it fails and tell it to check windows update to find drivers
I just installed RC1 last night. TP syncing just fine.
running windows 7...wmdc installed fine...
IF YOU ARE HAVING PROBLEMS SYNCHING!!
make sure to go into your phone settings
-go to connections
-go to usb to pc
-uncheck enable advanced network functionality
k thanks for the help guys, can't wait to get rc installed!
Thanks for the replies!
I tried all suggestions posted here, but none work.
The funny thing is that even when I put my phone in USB Drive mode, it still isn't recognized.
Updating the driver through windows update still results in 'An unknown device, your drivers are up to date'.
Syncing works without problems on my WindowsXP laptop..
The Muffin Man said:
Happened to me not 5min ago
1. Find the device in “Device manager” and remove it
2. Re-Plug in the device
3. A windows should try to install the software (Little popup in the task bar)
4. Click on it when it fails and tell it to check windows update to find drivers
Click to expand...
Click to collapse
This really worded for me. I installed Windows 7 the first day it was available and I was never able to figure it out how to make it worked until today. Thank you "The Muffin Man"
Running windows 7 RC and first few days when plugged phone in nothing happened. Was in no rush to get sync working as dual booting with Vista and was just plugging to charge phone. Other day I got a prompt to install device centre 6.1 and never done anything to initiate this. Wonder if an auto update may have caused this?
Works perfectly for me and tried with both Energy 3.0 and Elite RC4 (WM6.1 and WM6.5 ROMS).
In Vista atm so don't have W7 build number to hand.
I had a similar issue a few weeks back on my xp rig. Turns out I just needed to re seat my micro sd card, worked instantly.
nhshah7 said:
uh oh. i'm thinking of wiping vista from my machine and just using rc1. should i hold off on doing this?
Click to expand...
Click to collapse
go for it.. everything works great.. love the device support! plug in ur printer and thats pritty much it
Uninstall the "Windows Mobile Device Center" in your Control Panel, and plug your phone in again
Well i'm one step closer to fixing this..
I went into my bios and disabled USB2 (switching back to USB1).
After reboot my device was recognized and synced without problems.
As soon as I enabled USB2 again the device was undetectable again, even though Legacy USB support was enabled.
All other USB devices work, both in USB2 as USB1 mode.
Needless to say I don't want to run in USB1 mode.
Since I didn't have any of these problems with WinXP I assume it's a windows 7 issue.. Anyone knows where I can report this?
zonez said:
Well i'm one step closer to fixing this..
I went into my bios and disabled USB2 (switching back to USB1).
After reboot my device was recognized and synced without problems.
As soon as I enabled USB2 again the device was undetectable again, even though Legacy USB support was enabled.
All other USB devices work, both in USB2 as USB1 mode.
Needless to say I don't want to run in USB1 mode.
Since I didn't have any of these problems with WinXP I assume it's a windows 7 issue.. Anyone knows where I can report this?
Click to expand...
Click to collapse
Sounds like a driver support issue with your USB device (Motherboard).
I just installed WMDC and it worked without any problems.
Related
Dear All
I have a very strange problem here...i was using the Jwright WM6 rom till this morning with no sccuess in getting it to connect to my Vista laptop by all means...the only thing i could do is to connect to my desktop pc which has Windows XP & it connects succefully...so i thaught it's something related to the crossbow not being compatible with vista WMDC
Till this morning a friend came to me with his Universal running Jwright 1.90.96 WM5 to install a program so i connected to the Vista WMDC & it worked like a charm...so i downgraded mine to the same WM5 version he is running & i was shocked when it didn't connect & kept trying to connect till it gave me red error sign with no explanation
I used the same USB port, the same original cable on the same laptop under the same windows user...
Any explanation for that????!!!
I really need to sync with my vista laptop as it's my main PC at both work & home...
Thanks All
Have you updated WMDC from beta3, coz that has sorted alot of problems.If yes, try creating another user account, or try logging in as an admin, and connect wm device from there.
otherwise, REINSTALL VISTA, sorry to tell you that, but this is the easiest and the quickest way some times. and i mean it...
What kind of built of Vista are you running?
svyatko said:
Have you updated WMDC from beta3, coz that has sorted alot of problems.If yes, try creating another user account, or try logging in as an admin, and connect wm device from there.
otherwise, REINSTALL VISTA, sorry to tell you that, but this is the easiest and the quickest way some times. and i mean it...
Click to expand...
Click to collapse
i have updated to the latest WMDC version available on the microsoft site after removing the one that originally came with the windows as instructed by microsoft...i also tried creating another admin account & still no success !!!
this morning i tried to remove & reinstall the WMDC but still nothing changed..i hope that i won't be forced to reinstall Vista again as this is a very painful option to me after the mass amount of programs i have installed!!!
duanes said:
What kind of built of Vista are you running?
Click to expand...
Click to collapse
i'm using windows vista ultimate 6.6.6000 build 6000
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
[email protected] said:
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
Click to expand...
Click to collapse
what os?
try a new cable, or try plugging the cable into a different usb port.
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
You could just update to the latest HTC ROM from the official website if your phone is still under warranty, btw thats what i did but it didn't help. Note, that i'm running Windows 7 as my OS if anyone want to know this information to help solve the problem. Thanks in advance.
[email protected]
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
Settings-->Connections-->USB to PC and Uncheck Enable faster data Synchronization
I have the same problem.
in my situation i tried to recover usb-flash and flash a nokia phone. For both things programs installed their own drivers. Even after I deinstalled the software I probably still have their drivers on my pc. That's why I can't sync my phone...
is there a tool to manage installed drivers?
or the other way out is to reinstall windows 7
anyone willing to help?
This solution worked for me:
Thanks to Scubamike
copy and paste from
http://social.microsoft.com/Forums/...c/thread/7a6516e2-9a46-4e1f-b689-1aa7dc2bda64
I found a different solution that worked for me: On my phone I clicked start/programs/active sync/options and deleted all the old PC connections that were displayed. In fact, you could probably just delete ALL the PC connections displayed and start from scratch. You'll just have set up another sync partnership in WMDC when you plug it in. Let me know if this helps.
it is to easy! should work ALWAYS:
Make sure "Advanced network functionality" is switched off in the USB to PC settings then:
go to activesync, menu, connections, disable "connect via USB" off, press "ok" go back to connections, enable "connect via usb" press "ok" unplug and replug your cable. and all works.
greetings
i had trouble with a 6.5.3 rom i just cooked. had to uninstall, reboot, reinstall wmdc, then i synced okay.
I have the last original rom and win 7 and with removing all remembered connections on the pda, it connected immidiatly. Thank you for the help
i have been all over the microsoft forums to no avail. i recently updated my laptop to win7, and have a fuze running 6.1 mobile. when i connect my fuze to the laptop the laptop recognizes it as it begins to charge, but then nothing. i try to open win mobile device center and this is the error message i get C:\windows\system32\rapistub.dll is either not designed to run on windows or it contains errors. I have uninstalled and reinstalled 3 times and also tried different usb ports on my laptop. If anyone can help that would be awesome
I'm trying to connect my device under Android and I'm having problems.
Windows 7 actually detects it and I select the right x64 drivers, but when it is installing them, the progress bar keeps going forever while it says "Installing the driver software...".
The only way to close that window is to unplug the device. Then, the driver appears to be installed, but it's not.
What up with the driver?
Have you tried modify driver from G1 post for example, I remember i used modify version.
imfloflo said:
Have you tried modify driver from G1 post for example, I remember i used modify version.
Click to expand...
Click to collapse
After days of trying a lot I'm almost crazy because of this issue!
I don't know what the problem is, but I discovered that the my Polaris, when it's connected under Android, prevents the system from shutting down! I mean, if I choose to shut down my Windows 7 x64, it doesn't shut down until I disconnect my Polaris.
It happens the same when I boot my computer: it I have my Polaris connected, it doesn't boot. When I remove it, it boots as usual.
I switched the USB cable, the USB socket, and it's the same. But under Windows Mobile, it works like a charm
My Android OS is this one: http://forum.xda-developers.com/showthread.php?t=591104 (updated yesterday).
So, the problem is not the drivers, it's Android itself!
Hi
have you tried installing "PdaNet for Android" just (follow those steps)
just tried tethering my nexus s to my work desk top to be "off grid" but i'm having issues.
I cant for the life of me tether the NS to the computer (running windows xp -32bit).
i was able to do this fine on the n1, but no go on the nexus. the computer just doesn't recognize it.
I've down loaded the tetherxp.inf file, but when point the setupwizard to it, it can't find it.
wth??????
then i start doing to research and read that the NS tethering isn't supported by window xp?? just win7, win vista and linux???
is this true???
what have you guys been experiencing?
predation said:
just tried tethering my nexus s to my work desk top to be "off grid" but i'm having issues.
I cant for the life of me tether the NS to the computer (running windows xp -32bit).
i was able to do this fine on the n1, but no go on the nexus. the computer just doesn't recognize it.
I've down loaded the tetherxp.inf file, but when point the setupwizard to it, it can't find it.
wth??????
then i start doing to research and read that the NS tethering isn't supported by window xp?? just win7, win vista and linux???
is this true???
what have you guys been experiencing?
Click to expand...
Click to collapse
download, unrar and just point it at the USB driver folder and not the subfolder
http://rapidshare.com/files/441850739/usb_driver.rar
thanks slow.
can you explain how the file you linked is different from the tetherxp.inf file???
predation said:
thanks slow.
can you explain how the file you linked is different from the tetherxp.inf file???
Click to expand...
Click to collapse
honestly i havve zero clue, i just know that the folder i uploaded is right off my SDK
Can you tether through USB with xp computer with activesync installed?
mingkee said:
Can you tether through USB with xp computer with activesync installed?
Click to expand...
Click to collapse
there is no active sync for android phone
active sync is a microsoft to windows phones only protocol
still no go on the usb tethering.
i'm updating the driver via device manager and pointing it towards the unzipped file recommended.
am i doing something wrong here?
predation said:
still no go on the usb tethering.
i'm updating the driver via device manager and pointing it towards the unzipped file recommended.
am i doing something wrong here?
Click to expand...
Click to collapse
unplug device, uninstall device from device manager plug back in and when it asks to install, point it at the usb driver folder
slowz3r said:
unplug device, uninstall device from device manager plug back in and when it asks to install, point it at the usb driver folder
Click to expand...
Click to collapse
arg. just did that.
didn't help. oi!!!
still getting the "the hardware was not installed because the wizard cannot find the necessary software" pop up.
i'm giving up on this.
the tether function is "on" on the phone, but my comp doesn't recognize the connection in the network settings.
sucks as i'm trying this on a fresh XP os installed notebook. so i don't know what could be causing this... (yess all updates have been updated)...
slowz, you're able to tether with your NS to xp?
predation said:
arg. just did that.
didn't help. oi!!!
i'm giving up on this.
the tether function is "on" on the phone, but my comp doesn't recognize the connection in the network settings.
sucks as i'm trying this on a fresh XP os installed notebook. so i don't know what could be causing this... (yess all updates have been updated)...
slowz, you're able to tether with your NS to xp?
Click to expand...
Click to collapse
I dont seem to have any problems with it, ...try uninstalling anything associated with as a NS driver
me getting the nexus s on a subsidized price shouldn't matter no?
predation said:
me getting the nexus s on a subsidized price shouldn't matter no?
Click to expand...
Click to collapse
nope not at all....
thanks for the help slowzer.
when i get home, i'm going to try this on my laptop.
Let's see what happens and i'll post back later.
predation said:
thanks for the help slowzer.
when i get home, i'm going to try this on my laptop.
Let's see what happens and i'll post back later.
Click to expand...
Click to collapse
no problemo
This definitely isn't working with Windows XP.
This worked fine with my Nexus One. I had to install tetherxp.inf for it to work.
With the Nexus S, I removed all devices, uninstalled the drivers and started from scratch. No go with either the tetherxp.inf file or the RAR file posted earlier in this thread.
I can't find any other documentation on the Net that shows that Nexus S can tether with Windows XP.
Has anyone gotten this to work?
try this...
go to the PDAnet website http://www.junefabrics.com/android/index.php download their software onto your computer(free), then follow the directions on the screen. it will install the latest drivers onto your computer. i had to do that with my work computer too.
Well, I did that and now I just have a copy of PDSNet on my machine
I still can't get XP to recognize my Nexus S. When I plug it in I still get the New Hardware box that asks to find software for USB Device.
What I did was to add entries to tetherxp.inf for Nexus S which matched the signatures in device manager after I connected my phone to xp and turned on usb tether. I then installed the driver from tetherxp.inf.
Bazinga.
t3rabyte said:
Well, I did that and now I just have a copy of PDSNet on my machine
I still can't get XP to recognize my Nexus S. When I plug it in I still get the New Hardware box that asks to find software for USB Device.
Click to expand...
Click to collapse
you are on the latest service pack right?
Yep, I'm on XP Pro SP3.
I just got my Nexus 5 today, and I am trying to put things on the internal memory of the phone. However everytime I plug it in to install the drivers automatically, it says an error occurred during installation, and kicks me back out, and refuses to work. I use Windows XP still, 32 bit, and it asks me to search the web etc for hardware, and it never finds anything.
Does anyone know how to connect this thing? :'( I tried on my Windows 7 laptop too and same problem, except this time it worked as an SD card, but in the bootloader to root the phone it fails to install?
Google universal naked usb drivers. Try those
Sent from my Nexus 5
jd1639 said:
Google universal naked usb drivers. Try those
Sent from my Nexus 5
Click to expand...
Click to collapse
I managed to finally get my USB and camera to "install successfully" but no matter how long I wait, the storage never comes up.
:'( what is the problem?? All other phones they just install and are ready to go. This is my main Windows XP PC btw.
The mtp divers on xp can be a pain.. have a search for a thread that is somewhere on here, it covers most of the problems on xp
snappycg1996 said:
I managed to finally get my USB and camera to "install successfully" but no matter how long I wait, the storage never comes up.
:'( what is the problem?? All other phones they just install and are ready to go. This is my main Windows XP PC btw.
Click to expand...
Click to collapse
I have a Windows XP PC too and have MTP working. Try doing the following to get it working - Update windows media player to 10 or higher, install the mtppk12 = MTP porting kit and install the Microsoft user mode drivers for MTP. These should get you going.
That's way too much work. Just search for drivers in the N5 threads. I had the same problem, there's a universal driver like the person above said.
NEXUS 5