I cant hardSPL my Jamin! heeeeeelp :((( - JAMin, XDA Neo, S200 Software Upgrading

I recover my Jamin by Jester`s ROM "RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1". my phone was in "bootloader" after I try to install WM6.1 due forgoten doing HARDSPL!
but now i can`t hardSPL!
IPL:2.13.0001
SPL:2.20.0001 and remaining too, after hardSPL!
so i cant no longer install my favorite ROM "MyVista_Edition2Fnl" that previously did have
help me plz

Related

Imate SP3i WM5 Mucked phone up

Please please please, sum 1 here can be kind enuf 2 help with my problem.After installing wm5 finding lots of issues tried to downgrade to 2003se and now stuck woth spl 2.5.0105, no os and only bootloader with no iu mode. i tried mtty but give error not allow operation!! and try to typhoonnbftools but says no immediate flash available. I also try to use ruu patched 1010064 spl / 1.01.0109 but to no avail. I am DESPERATE for a solution to this as I just need my phone workin again. I also try to use psdwrite but dont know/understand proper commands as I have official ROM from imate site and would like to know if possible to load this onto SD card or sumthn?

Help Plsss....

Hey
I Have A Uni (SPV M5000) WM5, G3,WWE
Im trying to upgrade to WM6,Ive tried Serveral utilities,and roms, but most come up with an error,
most common Error 150, And Error 112, and now i cant get the device out of Bootloader mode as well (V1.01)
Pls Pls Pls Pls Help
Im Desperate for WM6 On My Uni
Thanks
Dear Friend,
I had the same issue with my UNI after I install the Ranju 7.6.
FOR EVERYONE: DONT GO BACK AFTER YOU INSTALL RANJU 7.6 Because only solution to unbrick your UNI is to go through very complex method of MTTY.
Here is a link how to unbrick your UNI http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader.
Do step by step and will work. before that dawnload some ROM that has all included: Radio, Extended ROm and the CE ROM. (be carefull on your brand as well as).
Good luck
also, four letters: RTFW (Read The F Wiki)!
And read the Readme.txt-s included with your ROM, they have all the error codes, meanings, and possible solutions for them. For the first time, these Readmes really are worthwhile

After the HardSPL...

Ok after doing all that was told to do to flash a G4 (which I did sucessfully) It does now show the SPL to be 2.21.olip.
At the end of the instructions says:
"After it is complete, your device will automatically reboot. The IPL version will be 2.21.0001 and the SPL will be 2.21.olip. If you see this then HardSPL was successfully flashed to your device.
Now you have HardSPL. You can flash any ROM using the RUU provided in the ROM package, should you have trouble with upgrading, try Mun's RUU."
I flashed my G4 Wizard with the new Diamond "clean" version. I think I want more bells and whisles; Question is...Do I have to do everything all over again or can I just flash with a new rom to a better OS?
I did try to flash to the Hyperdragon 6.1 and the SNN Diamond but, I think the OS I just flashed is too new to reflash to the others (error 264). (maybe I just answered my own question) But the HardSPL IS in there.
Someone please tell me what you think.
Thanks you!
Kim
Depending on my own experience you don't need to do hard SPL all over again. all you need to do is to do a good hard reset and try to update with nice and slow steps
i had a G4 before my current G3 and i know wht i'm telling you
just care to review these steps
- 50% battery or more (100% recommended)
this is a must .. cant flash without this condition
- laptop or pc with ups (you dont want to brick ur device cause electricity was out!) or you can risk and update on power supply
- use faria RUUs (they are the best) they can be used with any rom.
- connect the wizard to the pc after the hard reset (dont forget to backup) and follow the on screen (wizard not pc) till u get working windows mobile device
- when asked for setting ur device .. click escape (as said ... this device is guest till it has the WM that i want!)
- finally try it's right rom it's G4 safe if you ask, you'll find its link in my signature, also i suggest using radio 2.19
- last hint .. never use a rom with IPL or SPL. they will brick ur device (it did to mine )
any more help?

how to flash wm6.5 rom in my htc s710

i need help to flash wm 6.5 rom i've downloaded from here
can anyone one tell me how to do it in simple steps?
i don't know anything about roms
i didn't do any upgrade to my htc s710 device before
last thing my device has sim protection (sim unlocked)
thanks
first:
follow steps here:
USPL
second: download the rom you wish to use and install it same way as you installed hardspl!
3. finish!
thank you hashtowent i did as u said
and i finally got wm6.5 in my vox
and thanks to everyone here on this forum
i learned alot here about my vox
thank you
Hi Hashtowent,
Any idea why I am still stuck with ERROR 270 only with the WM6.5 in my E650? (I also followed your links and suggestions)
THX
Ant
Hi,
I tried today to update my VOX in rom WM 6.5 but I have the same problem as Antanico...
Someone can help me ppllleeeaaasseeeeee ???
Many thanks
No ?? Pleasseeee
I tried to follow all steps in USPL guide but still the same....
I have for now the ROM WM 6.1 from LeFab47 alias Fireburned
Guys... I had the same problem in my new VOX...(didnt have this issue in the older one)....
Jockey was considerate enough to point the following to me...... Used it and everything was absolutely fine....No error 270 etc...
There is one alternative to application unlock your phone. To properly application unlock the phone perform the steps as suggested to me by another friendly customer:
1. go to
http://www.modaco.com/index.php?s=&s...dpost&p=825304
2.Run MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB on the device
3. Run MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device and
reboot.
This will solve your problem...if it doesnt....lemme know ..
thanxxx
Hi,
Many thanks for your answer but but but after run the 2.cab I still have the same result ;(
Whhhyyyyy mmeeeeeeeee !!!!
Just te be sure, i must follow steps in this order right ?
1°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB
2°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device
3°) Restart
4°) Launch uspl_116_jockyw.bat
5°) Update ROM with "vox-USPL"
6°) Update ROM with custom ROM
???
after step 3...
try running the application unlock sda...
maybe will solve your problem
if it doesnt.....i will let you know another solution
thanx
.....same.....
Is it normal that at the end of step 4 I have the sceen with the tux after screen green, red,... and after nothing happend I must reboot the phone myself ??
All is OK nowwwwwww.
Like a newbie after step 4 I shut the phone instead of launch directly step 5.....
Thank you Indtram for your help
hi, i can't upgrade to windows mobile 6.5 because "error 270".
And when i launch the uspl, my vox shutdown and i restart it but nothing.
What have i to do?
thx
please read the complete thread and you will have the answer to ERROR 270....
hello
i have bougth a htc s710 which i wont to have a new windows on... wat most i do?. it is a risk?
It's no risk, do USPL as described in the sticky (or the Wiki) and then flash any ROM you want (for the S710 of course)
thank you very much
this was a good solution to this damn error
thank you very moch
Dr. Ahmed Zaher
Hi Mathitalia,
It is over 1 year from the issues we had.
Can you please tell me if your phone is working with Italian SIM cards?
Did you manage to SIM unlock it?
All the best,
Antanico

[Q] htc p3470 stuck help plzz

my phone is stuck on smart mobility onbl 1.11.0000 spl 1.11.0001 gsm 03.15.90 os 1.11.0.0 .i was to try hard reset but its say format failed.and i lost my backup cd .how can i fix my phone.sorry for my english.plzz help
htc phar100 stuck plzz help
my phone is stuck on smart mobility onbl 1.11.0000 spl 1.11.0001 gsm 03.15.90 os 1.11.0.0 i was to try hard reset but its say format failed.and i lost my backup cd .how can i fix my phone.sorry for my english.plzz help
Hi there,
Easiest, quickest and safest way (for a beginner like you ) is to download an official rom and flash it.
You will need to put your device into bootloader to flash, but you should have no problems with this method.
Once its up and running, read the very good guides and understand the procedures before flashing again
Chow.
thanks but i dont have backup and i can get oficial rom from htc.plz help
Sorry i didnt understand you there fully. Did you say you cant get official download or dont want to flash it as you dont have a back up?
Here is the d/l link for official rom from HTC : http://www.htc.com/www/supportdownload.aspx?p_id=112&cat=2&dl_id=12
If you have you tried a hard reset and it did not work then nothing else will put your phone right as far as i can tell from the info you gave me. Your only alternative is flashing an official htc rom.
How did you get to this place, what did you do to ur device?
IN HTC SUPPORT I RESIVE THAT(Sorry, this software download is not suitable for your device)I AM FROM ENGLAND.HARD RESET NOT WORKING ITS SAYS (FORMAT FAILED)HOW CAN I GET PHONE WORK AGAIN.SORRY FOR MY ENGLISH
I DID BACKUP BUT I LOSTETSORRY FOR MY ENGLISH
Ok read this, it has link to official wwe rom : http://forum.xda-developers.com/showthread.php?t=458965&highlight=official+rom
ps : just a word of advice, if you had typed official rom in the pharos forum you would have found this quite quickly
Cheers.
If you run into anymore problems after reading the guides, let us know.. we might be able to help with the SPL stuff.

Categories

Resources