Hi all. Have a problem. I tryed to flash my friends Kaiser with other rom by remote method. All is ok, but i was not able to see that his touchscreen didn't work. Friend don't want to repair it, but now he can't to calibrate screen and so new rom not starting. Is it possible to flash this phone with any backup to avoid calibration wizard at the start? Any ideas?
P.S. Sorry for my english
Related
Guys i did a very stupid thing this evening. I flashed my Imate Jam using the MAupgrade_No ID and the Greek Qtek firmware.
The flashing was good but now my Jam cant go pass the first screen and continuously reboots. It says something about illegal rom used....and reboots
Any solution to bring back to the former situation?
Please respond...i am really desperate
OK i figured out how. On my panic i couldn't even think.
God Bless the "search" button!!
But how could i get past this problem with the greek version qtek rom? It is locked and although it lets me upgrade (using the No-ID) on the first reboot after flashing it rebbots all the time.
Any ideas?
Thanks
Yep proteus3000uk,
Get yourself a shipped rom from your own provider. Put your magician into bootloader (camera & power & softreset until it reads serial or usb, there will be no backlight) uncheck usb in the connection settings from activesync on your PC & connect usb. Now it will read usb. Start the shipped rom program.
Or download a dumped or Big Storage rom & follow sd-card
flash method including the copy of your id from (first 420 bytes or so from your own romdump).
Or send it back and pray/beg for warrenty.
First two options are preferred off course. I 'repaired' mine with the first option, while I only had a black screen. So no OS or whatever on the rom.
Goodluck, M
Well i think that the Greek Qtek ROM is the only ROM worldwide that is edited from its programmers to run a phone version check, even after it lets you install it on your phone.
If it finds a phone version other than Qtek (in my case Imate Jam) the phone cant get past the initial splash screen and keeps rebooting for ever!
Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?
oltp said:
Then put it into bootloader and flash it wit an i-mate rom. Dumped, shipped or BIG storage and get rid of this Qtek ... rom.
Have you tried anything else than this qtek rom and what were the results?
Click to expand...
Click to collapse
The original english tom (WWE) works just fine (as it should anyway). The thing is i was trying to install the qtek GREEK rom in order to have proper Greek on my phone.
Unfortunately the suckers have locked the greek qtek rom and they have compiled the actual lock into the rom itself.
Although the rom is installed just fine using the No_Id prog, at the first reboot the phone hungs and then reboots for ever!
Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M
oltp said:
Please correct me if I'm wrong, but I belief you can actually revert your magician back to the WWE rom and now you want help for unlocking of the Greek qtek rom.
This doesn't sound VERY URGENT to me, cause you can use your device only not in proper Greek, OK?
Can't help you with the unlocking though, maybe Buzz, Anansky or one of the other bright developers can.
Regards, M
Click to expand...
Click to collapse
If you check my second post you will see that i figured out how to revert back to my original ROM just fine.Som bo prob with that.Please READ before you post.
Thanks
Hi to all,
i have try to format S200 Qtek and now when i power on, i always have poot loader screen...
please what is wrong?
must i flash for solve pb?
if yes link with good french rom will be appreciate
thanks in advance for help
regards
First, you have provided absolutely no useful information:
What was on your device before you attempted to flash the Rom?
What Rom did you attempt to flash?
What info is displayed on the Bootloader screen?
If you can't answer these simple questions then you have not studied enough to even think of flash your Rom.
yes your right i have not say anythink in this post... sorry
ok so first i want to say i have solve my pb by flashing my ROm with
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship.exe
first it was 2.9 rom version.
then the pb is come when i try to reset device with jafwm.
(service / reset device)
thanks for your reply
regards
Hey,
it's my first post hire in forum.
I tryed flash a new WM6 Image for HTC Wizard. It's not a first flash of my smartphone. Everytime wirks everything fine, but at this time hase my WinXP system reboot at flashing process. I has not see any bluescreen or like that.
Now is my smartphone at 31% of flashing. How can I resume a flashing or how can I flash the OS in to the phone?
The phone is not turned of. It's since the problem on.
Please give me a Tipp bovor the battary is off.
Sorry for my bad english.
thanks a lot for you help,
Paschka_k
paschka_k said:
Hey,
Now is my smartphone at 31% of flashing. How can I resume a flashing or how can I flash the OS in to the phone?
Click to expand...
Click to collapse
Wizard is not "smartphone"
Ok, thx for tip.
Can some one help me with this problem?
Is it possible to flash the WM5 or WM6 to HTC Wizard via SD Card?
Where can i gat the requested files?
Please give me som informations.
thx,
Paschka_k
Make sure the device is powered off and then hold the camera button while powering on. This will bring you to bootloader mode. Connect your device via USB and then flash your carriers latest Rom. This will restore your Wizard to life.
Once you have a phone again and not a paperweight then make sure you do some reading before you try to upgrade again. There are alot of stickies that will teach you how to complete the upgrade process successfully and reading the Wiki helps too.
Dear Dan,
thanks a lot for your quick help. I has reas already many posts in many forums. I has frash already 6 times my device.
At this time are problem not on my NowHow. My WinXP System has create this problem.
I will post about fixing of my problem.
Thanks a lot again.
Paschka_k
Hello People
I have installed WM6.1 Rom.
But today (i dont know why (i'm a idiot)) i wanted WM6 back, when I restart, i cant start my Phone (HTC screen... and nothing happens) the phone doesnt continue to start.
Cane someone please help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Also, My HTC S710 phone don't wanna connect to the PC.
Sorry my english, i am Dutch speaker.
Thanks
JDMHatchy said:
Hello People
I have installed WM6.1 Rom.
But today (i dont know why (i'm a idiot)) i wanted WM6 back, when I restart, i cant start my Phone (HTC screen... and nothing happens) the phone doesnt continue to start.
Cane someone please help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Also, My HTC S710 phone don't wanna connect to the PC.
Sorry my english, i am Dutch speaker.
Thanks
Click to expand...
Click to collapse
And, do you have test reflash ?
fireburned said:
And, do you have test reflash ?
Click to expand...
Click to collapse
I think not,.. how you reflash it?
JDMHatchy said:
I think not,.. how you reflash it?
Click to expand...
Click to collapse
Enter bootloader mode and reflash :
- switch off your phone, hold the camera button and connect the usb cable. If USPL was flashed you should have no problem flashing another ROM
Bye
fireburned said:
Enter bootloader mode and reflash :
- switch off your phone, hold the camera button and connect the usb cable. If USPL was flashed you should have no problem flashing another ROM
Bye
Click to expand...
Click to collapse
I See the RED - GREEN - BLUE Screen..
Look at the Wiki article on SD-Card flashing, that should be the easiest way to flash the ROM again!
Flash ROM/Radio from SD-Card
http://wiki.xda-developers.com/index.php?pagename=vox_sdcardflashing
1) Once you have all the files you need, either from the kitchen or from prepackaged ROMs (they can be extracted with WinRAR),
What Files do they mean? + where do i get these files?
=(
That just means that you have to have the ROM, either from the forum or self made through the kitchen! In your ROM there is a *.nbh file. Just follow the steps from there. The nbh is the only file you will need!
frauhottelmann said:
That just means that you have to have the ROM, either from the forum or self made through the kitchen! In your ROM there is a *.nbh file. Just follow the steps from there. The nbh is the only file you will need!
Click to expand...
Click to collapse
I have tried the SD Card Flashing, by following the instructions on the wiki. The bootloader will scan my SD card but comes up with and Invalid Certificate error and won't start the upgrade.
What now?
Dutch
Buy HTC Diamond, and never again repair what is working fine! :-D
P.S.: Sorry my English Im Czech speaker.
hi to all
i have a question
since i' ve flashed the ppc i'm not able to switch on the flash in the preview mode, but only when i click on the snapshot button, so i can't focus very well and take good photographs...
sorry if my english isn't very well, but i hope you can halp me to solve this annoyng problem
no ideas?
if you have buy HD2 now
you does execute Hard reset after first configuration
have i to hard reset?
but are you italian?
can you ask in italian?
the ppc isn't new, i flashed it twice....
please i need help, i use th eud2 mostly to take photographs.... it' s very important