Related
Hi guys.
I did it... i screwed up my QTek S100! I tried to upgrade it, maybe the wrong files, dunno... now it is *dead* ! I only get a dark screen with "SERIAL V1.00" or "USB V1.00" if docked (should be bootloader mode). Nothing else.
Would you please be so kind as to help me in recovering from the disaster ? I do not have any backup, nor ROMs. I own a 512 MMC.
I would need English Roms... pleeeese !!
Thanks a lot.
Silver
Do you still have the files you used to upgrade? What's the name of the file?
Also, leave the info on your previous ROM.
I had the same problem with my Qtek S100 when upgrading it with the new firmware. The upgrade process stopped/crashed the first time leaving my unit in the same state you're describing. But, what I did was simply to run the upgrade utility again and then it worked fine the second time.
I don't know where you're from but if you have a swedish unit like me you can get the latest upgrade utlity from this adress:
http://www.smartmobile.se/upgrade/upgrade.aspx
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
slvrbllt said:
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
Click to expand...
Click to collapse
Looks like the same happened to me. Try to open battery cover (or remove battery for several second. Then put everything back and push Power button. Does it turns on (with hard reset)?
Nope buddy! The OS is gone! Whatever I try to do, it always starts in Bootloader mode (Serial V1.00/USB V1.00).
Try removing the battery for 30 minutes (or whatever time it takes for the backup battery to discharge). That should recover your previous configuration although I haven't tested it.
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
slvrbllt said:
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
Click to expand...
Click to collapse
I would like to try upgrading my JAM...but now I`m affraid a little bit... :roll: Have U tried to update with the latest S100 ROM...the swedish one?...or the I-mate JAM WWE ROM...?
Regards,
Primoz
Backup ROM
Is there a way to make a backup of my rom?
I have the qtek s100 with english rom.
Purchased seperate.
rom 1.03.00 WWE
radio 1.05.00 (upgraded)
extrom 1.03.100 WWE
Had the same issue with my radio version upgrade.
Scared the hell out of me ...
Backlight did not lit up ...
And an error apeared on my pc ...
But I was able to upload it when I tried again and the sync program of ms was killed.
If anyone knows how to make a working back-up ...
I like to help.
Think it's interesting to see how everything works.
And ofcourse, if you worked it out already, let me know how ...
And what macrinus said wont work.
When you do a hard reset, you do exactly the same.
So I think it's all gone.
why not dump the os to sd card, ntrw to pc and then put the nb1 fille in the ftp........
Tell me how ...
Tell me how, and I will ...
Sounds like chinese to me buddy.
Just got this pocket pc for 3 days.
First time I use a ppc.
Is that with xbackup?
Then choose all data?
Or do you mean another way?
What is ntrw?
And how do I get it from the backup?
And also, how is he suposed to upload it to his ppc?
Am asking this all to get to know it for myself.
Need the basic information before I can actually do all this ...
ok, sorry, if you are new to this forum, maybe its time now to browse this forum using the "Search" . There are hundreds or maybe thousands really good topics / advices available in this forum, posted by experts.
I and hundreds others I think, have really learn a lot from this forum.
On this specific topic you can search for :
- dump rom
- bootloader / bootloading.
You can also go to this forums ftp : ftp://xda:[email protected]/
to download all the necessary files
pls be patient and enjoy the tour......
Hi.
I have not posted much on this site, yet I have used it plenty of times. And first off I have to say "Thank you oh so very much" to everybody who frequent this site. Most of all I would like to thank the developers and rest of the crew that helps users on a daily basis.
I've had plenty of phones the last few years: 9090, 9100, Tytn and now Tytn II - all of which have been flashed - successfully I might add - with software and aid from you guys. (Ok, so my Tytn nearly ended up as a paperweight, but with some fancy maneuvers using the CE SDK from Microsoft I was able to use it as a PDA again)
Now, I am stuck. Really stuck. (Not saying I'm not to blame, but I am still stuck)
I've got a Tytn II (The P4550 HTC Kaiser 120 I believe). A few weeks back I flashed this with Alex's Home ROM (http://wiki.xda-developers.com/index.php?pagename=Alex's ROMs). At the time I was running Radio 1.27.12.11, and continued to use it after the Alex flash.
That worked perfectly.
But being interested in always trying new stuff I yesterday decided to flash Alex.v5.WM61.HTC.302.UltraClean.ROM.beta2. And it really went bad.
I studied up on many postings (obviously not enough) and started the process:
#1: Hooked up the pda to my computer
#2: HardSPL v1
#3: Tri-Color mode and activesync grey
#4: Started the upgrade with KaiserCustomRUU.exe
Everything went smoothly until it hit 99% - there it stuck and the program ended with a communication error. My computer runs Vista (yes, I know. I wont even consider flashing another phone using Vista), but it has worked flawlessly 25-30 times before.
Anyways, what happened when I tried to recover was that the phone went into tri-color mode. Needless to say it was unable to recover. After much back and forth I reinstalled an old laptop with XP (as mtty does not work on Vista) and was able to boot it back in to the OS using a walk trough from this site - cudos to Laurentius26 for the post)
Anyways - it came back. But since it failed the flash I tried it again to make sure it finished properly. What I did was flash back the Alex Home ROM I had in the first place - that worked. Then I flashed back the 1.27.12.11 Radio ROM - which failed - seriously.
It hung on 17% and when reset it would only boot to tri-color. And this is where I am now.
Every time the phone resets it boots to tri-color. I've done and redone the mtty (with and without the task 28), but it stops in tri-color mode. If I at that point hook it up to mtty and issue the boot command it will boot properly, but thats kinda annoying - having to carry with me a XP laptop for each time I have to reset the phone. (Ive also tried the set 14 0 when the phone is in this state, but it will still only boot to tri-color)
So - what now?
I've tried flashing the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship, but it stops with 294 - invalid vendor id. I've tried flashing the same ROM with HardSPL installed - no vender id error but it fails at 16%.
In desperation I've tried HTC_Kaiser_NL_ROM_1.56.404.6_Radio_22.45.88.07_1.27.12.17_Ship, but this also fails at 16%.
I've studied many a post on this site, but have so far been unable to recover from this error.
Is there any hope of regain the much needed functionality of normal booting?
Hopefully there is.
Thanks in advance.
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Most definetly.
These were also posted by e-men in another topic this morning so I am currently installing Windows XP on a computer at work to try this.
Will report back.
Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
ulfthomas said:
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Click to expand...
Click to collapse
WM6.0 and WM6.1 radio's are different, they are not compatible!
So be carefull which radio version you are flashing
Info about radio versions:
http://forum.xda-developers.com/showthread.php?t=349375
Cheers,
Laurentius26 said:
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
Click to expand...
Click to collapse
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
ulfthomas said:
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
Click to expand...
Click to collapse
Laurentius26 said:
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
Click to expand...
Click to collapse
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
ulfthomas said:
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Click to expand...
Click to collapse
Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
And all good tips Leo.
OS: Windows XP SP2. Freshly installed. Only Activesync 4.5 added.
HTC: Is orignial. Patched a few times using HardSPL
Original rom: As mentioned above I've tried a couple of them, but both ending in invalid vender id.
And no usb hub present.
Another comment - the flashing done today and yesterday has been done from two different xp computers - but with same result.
Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
I'm going to upload a shipped ROM for you, this one if you didn't try it yet?
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Another question... did you use Custom RUU with ROM update?
http://forum.xda-developers.com/showthread.php?t=334890
ulfthomas said:
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
Click to expand...
Click to collapse
Yup - that one has been tested - fails with invalid vender id.
Also tried flashing that rom with HardSPL - comm. error.
And no, I have not tried the Custom RUU. Will for sure try that now.
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Yes... try with another shipped ROM please?
ulfthomas said:
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Click to expand...
Click to collapse
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Use one more time MTTY, clear all FATS and I've send you a PM.
ulfthomas said:
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Click to expand...
Click to collapse
If you're getting an invalid vendor id it sounds like your hardspl or superCID isn't working correctly. Before going any further it's probably best to go to your bootloader screen and check that hardspl is still installed.
After that, I'd try flashing from the SD card.
Good point ach2, but when launching HardSPL and starting the update it lists the correct data on the bootscreen (Jumpspl or something equivavlent to that)
Leo: Looking around xda I found an article about dumping the ROM from another device. In the same thread I found a link to dumped original ROM. I patched that and it worked like a charm.
My PDA came back to its original state.
After arriving home just now I thought I would give your ROM another go, but same result - stuck at 16% (With HardSPL and Custom RUU)
What can cause this?
hi everyone,my problem is that after uprading my pm300 it stuck into bootloader any idea on how to solve this problem and is g4 i realy need your help urgently thx in advance
What ROM did you upgrade to? If it was to a WM6 ROM using the "new" upgrade method, you may have failed to hard SPL your device. What ever the cause, the solution (as ever) can be found on the wiki.
yes you are right i didnt HARDSPL my device befor updating with (ROM
MY GREEN EDITION WM6.1)is there any hope that my phone will come back to live,by the way thx for the reply
If the device can get into bootloader, it should be possible to recover it In my previous post there was a link to the wiki page for recovering devices from bootloader. If you want any more info, I'll be happy to try and help...
thx for the quick reply but my problem now is if i connect the phone i can see the usb on the screen alright but the computer doesnt sync it and if i go ahead and update the rom i get error make sure the usb/cradle is connected properly i dont know what to do plssssssssss i need help to revive this phone thx in advance
thx mr 13v5y for your help my is alive and working like never before thx to you once again i rely appreciate the help you gave me more greep to shoulders ve a nice day
No problem! If you ever have any issues, take a look at the wiki first though
I double posted! I blame Linux!
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
"think" you followed all the directions?
sorry for my bad english or leak of knolge in this part of the world i just read so much regarding this subject ant the more i read the more i got confused
so i just sow the first logical faq and followd him, plz i need my phone all my life is in their, help me.
danny
speebman said:
hello everybody
i started to flash a new rom
Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid V2_1_65.14.06[No_CubeV2]
and i think i followd all the instractions but after starting the flashing it stock on 17% after removing the battery as the program said it wont go over 0%
firs i installed kaiser-HardSPLv1 and after that i started to flash the rom and its not working.
pls tell me what to do to save my nice phone
dannt
Click to expand...
Click to collapse
Things that will help others help you:
1. where are you located?
2. who is your provider
3. what ROM WERE you on?
4. ok - you had a phone that was working - and you did:
a. what did you do first?
b. second?
c. etc.
Your message KINDA indicates that you flashed a ROM and had issues - so you THEN flash HARDSPL? was that successful?
Bill
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
you don't have hardSPL installed..! surprise, surprise
u don't have hardspl flashed from bootloader info u provided. flash hardspl be4 flashing any roms.
please search and read; this has been answered many times.
p.s. use the new hardspl by jocky which is a sticky in this forum.
speebman said:
im from israel but my phone is from uk i think, my original rom was the HTC 6.1
i just run the kaiser-HardSPLv1 program and then i started flashing the rom duty 6.1 rom and it stoped at 17% like the program said i removed the batery and started the flashing prosse again but now it doesny even go above 0%, now im stock in the tri color screan
its writen
kais130
spl-3.28.0000
cpld-8
and usb in the littel whait screan
Click to expand...
Click to collapse
OK - I do not think that you got the HARDSPL installed on your phone correctly - BECAUSE - I believe that it would say OLIPOF or JOCKY on it and it does not.
I have not seen the new HARDSPL 328 and 329 but it LOOKS like to me that you did not successfully get the HARDSPL on your phone.
Personally - I would scan the message boards for GSLEON3 (user name) and send him a private message - there are many others that can help you and he or others MAY come trolling by and take pity on you - but at the moment he is the one that helps people in your situation the most from what I have seen.
I would NOT continue to work on it myself as you can definitely mess your phone up permanently. Does your phone still go into boot loader mode? If so - can you flash the required HARDSPL onto your phone?
Find a message that GSLEON3 has left and then lik on his name and send him a private message - he is very nice - BUT - he is VERY busy - continue to be nice and he will most likely get you back and running.
Bill
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
speebman said:
first of all thank u for the help
but, wich one i need? 28 or 29?
and how do i do this spl if i cant copy them to my device.
danny
Click to expand...
Click to collapse
Danny -
Deep cleansing breaths here ok?
1. personally - I would PUT BACK what ever you had on your phone and get it running again - trying at this point to get ot to go to a different ROM is not a good idea right at this minute.
2. 28 and 29 from what I read makes no difference - users try each one to see which one works better on THEIR flashed ROM.
3. What I would do is look for the HARDSPL that goes with what you had loaded to begin with - or the actual SPL that came with your original ROM and put that one back.
I would be stuck here because I have to use JUMPSPL on my phone because I get the white screen - but I THINK that (don't quote me because I do not do it this way) if you don't get the white screen you can just flash the HARDSPL to your phone without JUMPSPL (having to be able to copy something to your phone.
HOWEVER - if you cannot or do not know how to continue from reading the WIKI - you MUST request help from a professional - I have already recommended one. (GSLEON3)
Bill
my active sink is not seeing the devais, maby MTTY? wil help
speebman said:
my active sink is not seeing the devais, maby MTTY? wil help
Click to expand...
Click to collapse
Based on your current track record, I wouldn't suggest you use MTTY as you have a VERY HIGH probability of bricking your phone (ie: it won't ever be usable again).
so im fu--.
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
mfrazzz said:
Can you get the phone into the bootloader mode? Turn the phone off (pull the battery if you have to) then press and hold the camera button while you turn the phone on. You should get to a tri-color screen (this is the boot loader). Now plug in the USB cord and see if it switches from saying Serial to USB. If so, you can try flashing AN OFFICIAL ROM THAT WAS MEANT FOR YOUR PHONE (ie: Don't try to put an offical AT&T rom on an Orange). When you run the RUU program it will tell you that you need to have ActiveSync working, but don't worry about that. If your phone in bootloader shows USB, you can continue on.
BUT AGAIN... You need the Official rom that was meant for your device. Since you are not HardSPL'd you have to do it this way.
If you don't understand any of that, or have questions, don't just try it hoping you get it right...
As stated previously, it would be well worth you time to get someone like GSLEON to assist if you can.
Click to expand...
Click to collapse
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
speebman said:
thank you!!!!!!1
i have flashed to my priviuas rom the original 6.1 htc rom and now its ok!!!
tnk
Click to expand...
Click to collapse
Cool. Glad that worked for you.... NOW, your next task is to read and understand ALL the steps before you try flashing a custom rom. HardSPL that sucker (but understand and follow EVERY step before you try that) and then you should be good to go...
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Yes it is, but if you read this sticky at the top, it should help (start with noob guide which is the first link I think):
http://forum.xda-developers.com/showthread.php?t=369282
speebman said:
my only problem is that their are so many strings of information and so many threads even wiki is confusing.
i will try to do this after i will make some order it all of this.
tnx again 4 the help
danny
Click to expand...
Click to collapse
Not to be mean but if you have red Wiki and looked at threads here and they "don't make sense to you". You really have no business flashing a rom. If you don't understand what you are doing sooner or later you will brick your phone from your lack of knowledge and it will be no ones fault but your own.
I am really surprised people were willing to repeat what has been typed out hundreds and hundreds of times on these forums.
Welcome to XDA
I followed all of the steps to flash a new ROM into my tilt. I attempted to install a hard SPL 1.93, but it stuck me at the bootloading screen. I can't active sync because im at the screen and it wont let me. I tried the program mtty, but i cant get it to work because it wont register. it says...:
KAIS1*0
SPL-1.93.0000
CPLD-8
I know i'll probably get banned from the forums, but I'm just hoping someone can give me a quick answer. I appreciate the help.
never heard of that HardSPL, only 3 versions.
Go grab a proper HardSPL (I recommend 3.29) and see if you can flash that, but you should properly study first.
Also, please read the Flashing For Noobs section and DO NOT MAKE NEW THREADS FOR COMMON PROBLEMS
XPhamz said:
I followed all of the steps to flash a new ROM into my tilt. I attempted to install a hard SPL 1.93, but it stuck me at the bootloading screen. I can't active sync because im at the screen and it wont let me. I tried the program mtty, but i cant get it to work because it wont register. it says...:
KAIS1*0
SPL-1.93.0000
CPLD-8
I know i'll probably get banned from the forums, but I'm just hoping someone can give me a quick answer. I appreciate the help.
Click to expand...
Click to collapse
He has a white screen issue. His factory spl is 1.93.0000. Also its not hard spl 1.93.0000 its jump spl 1.93.0000
Go here:
http://forum.xda-developers.com/showthread.php?t=354061
And here
http://forum.xda-developers.com/showthread.php?t=423486&highlight=white+screen
I hope that this works.
Thanks for the responses, but I can't connect my phone to my computer due to active sync not recognizing onto my phone. I installed it and reinstalled it twice. I read everything on the Bootloading screen, but half the programs wouldn't load up. I can't upload anything to my SD card because i don't have a reader.
XPhamz said:
Thanks for the responses, but I can't connect my phone to my computer due to active sync not recognizing onto my phone. I installed it and reinstalled it twice. I read everything on the Bootloading screen, but half the programs wouldn't load up. I can't upload anything to my SD card because i don't have a reader.
Click to expand...
Click to collapse
ok try this just plug your phone up to the usb cable and flash a stock rom. Dont worry about the sync your phone wont sync to your pc when in bootloader. Only a stock rom DONT flash a custom rom. After you flash the stock rom you should be able to start over. I hope that this helps
sorry to sound like a newb but how would I go about doing that? I have it downloaded.. and I ran it on my computer? now what?
XPhamz said:
sorry to sound like a newb but how would I go about doing that? I have it downloaded.. and I ran it on my computer? now what?
Click to expand...
Click to collapse
What installing the stock rom? Yes it has to be run from your pc. I think that you need to read this thread Also
http://forum.xda-developers.com/showthread.php?t=433835
http://forum.xda-developers.com/showthread.php?t=374691
Kaiser Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Vol22002 said:
What installing the stock rom? Yes it has to be run from your pc. I think that you need to read this thread Also
http://forum.xda-developers.com/showthread.php?t=433835
http://forum.xda-developers.com/showthread.php?t=374691
Kaiser Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
It worked! I really do appreciate your help! After hours of hoping I didn't brick my phone! Thank you so much.
No problem I remember what it felt like to be new at this. Good luck with your rom upgrades.
Mods please close this thread. Thanks