Related
My 8125 no longer connects via USB. XP tries to install "Smartphone USB Sync" where I get a message that the software has not passed Windows Logo testing, I click to continue anyway. Next is an error message that the hardware could not be installed because the system cannot find the file specified.
Can someone help?
Not sure the reason, but sounds like ActiveSync installation is corrupted. You could install AC. That should restore all the files / registry entries...
This is happening even after reinstalling ActiveSync 4.5 several times.
Please I hope someone knows a solution for this..?
Cingular 8125
Faria WM6
Win XP
ActiveSync 4.5
hmmm....tried a hard reset? or another usb cable?
Stinkfist said:
This is happening even after reinstalling ActiveSync 4.5 several times.
Please I hope someone knows a solution for this..?
Cingular 8125
Faria WM6
Win XP
ActiveSync 4.5
Click to expand...
Click to collapse
Have you tried using a different PC. The idea here is you need to determine if its the PC, the cable, or your phone... So try to narrow this down to where the problem lies.
Also make sure you are using a USB port that is direct to the mother board and not going through a hub. Some USB ports on the front of a PC go through a USB hub that is internal. Use the ports on the back of the computer (and try this on different ports).
I did try a hard reset, and different USB port. I still get the same error. I think its a problem with the USB driver? I have had ActiveSync working on this machine before. I uninstalled it. Then reinstalled it to perform an upgrade, but am having this problem. I don't have access to another PC.
While XP tries to install the USB drivers I did try manually choosing where to find the drivers, in the ActiveSync directory. I get the same error.
Uninstall Activesync through add/remove programs, then go to C:\Program Files\Microsoft ActiveSync, delete the whole folder on your desktop pc....download 4.5 from microsoft's website....install it, then plug your device back in.....see if that helps......
Stinkfist said:
I did try a hard reset, and different USB port. I still get the same error. I think its a problem with the USB driver? I have had ActiveSync working on this machine before. I uninstalled it. Then reinstalled it to perform an upgrade, but am having this problem. I don't have access to another PC.
While XP tries to install the USB drivers I did try manually choosing where to find the drivers, in the ActiveSync directory. I get the same error.
Click to expand...
Click to collapse
Also, see what antivirus/firewall you're using. That caused me a little problem first time I installed it.
Thats why I run all my antivirus and firewall stuff off the router, ActiveStink is too buggy with other softwares.
anichillus said:
Also, see what antivirus/firewall you're using. That caused me a little problem first time I installed it.
Click to expand...
Click to collapse
Thanks for the suggestions, guys. I had already tried deleting the c:\program files\microsoft activesync" folder before installing 4.5 fresh again. It didn't help.
Just to test, I installed ActiveSync 4.2, knowing I cannot use it with WM6. But it installed fine and XP recognized and installed the 8125 perfectly. I was able to access the phone via WM5torage and everything (except no sync, as expected).
Then I uninstalled 4.2 and reinstalled 4.5 clean again. 4.5 installation "updates" the USB drivers everytime. After, the 8125 will not connect via USB with the same error message everytime.
Did you try google'ing the error message?
Stinkfist said:
Thanks for the suggestions, guys. I had already tried deleting the c:\program files\microsoft activesync" folder before installing 4.5 fresh again. It didn't help.
Just to test, I installed ActiveSync 4.2, knowing I cannot use it with WM6. But it installed fine and XP recognized and installed the 8125 perfectly. I was able to access the phone via WM5torage and everything (except no sync, as expected).
Then I uninstalled 4.2 and reinstalled 4.5 clean again. 4.5 installation "updates" the USB drivers everytime. After, the 8125 will not connect via USB with the same error message everytime.
Click to expand...
Click to collapse
Stinkfist said:
Thanks for the suggestions, guys. I had already tried deleting the c:\program files\microsoft activesync" folder before installing 4.5 fresh again. It didn't help.
Just to test, I installed ActiveSync 4.2, knowing I cannot use it with WM6. But it installed fine and XP recognized and installed the 8125 perfectly. I was able to access the phone via WM5torage and everything (except no sync, as expected).
Then I uninstalled 4.2 and reinstalled 4.5 clean again. 4.5 installation "updates" the USB drivers everytime. After, the 8125 will not connect via USB with the same error message everytime.
Click to expand...
Click to collapse
Start all over.....
Uninstall what you have > delete the old folder > run Regseeker (you can google it and clean your registry safely..I've used this program for several years now without issue. If you have a HP printer..don't run!) > Re-install 4.2 and don't sync your device yet > Install 4.5 over 4.2 & you should be fine.
If Activesync 4.5 doesn't attach itself to a Com Port..open up Connection Settings in Activesync and uncheck "use the following ports" and try to sync.
I'm currently having similar issues on 2 pc's after I installed Radmin 3.0.
If you still have this issue, search for 4.5 beta & install it.
Conspiracy Theory: The final version of Activesync 4.5 is checking our versions of WM6 and don't like it. It's disconnecting the Com Ports from Activesync so we can't use it any more.
Stinkfist said:
Thanks for the suggestions, guys. I had already tried deleting the c:\program files\microsoft activesync" folder before installing 4.5 fresh again. It didn't help.
Just to test, I installed ActiveSync 4.2, knowing I cannot use it with WM6. But it installed fine and XP recognized and installed the 8125 perfectly. I was able to access the phone via WM5torage and everything (except no sync, as expected).
Then I uninstalled 4.2 and reinstalled 4.5 clean again. 4.5 installation "updates" the USB drivers everytime. After, the 8125 will not connect via USB with the same error message everytime.
Click to expand...
Click to collapse
it is the usb drivers causeing the problems, i had to go around and just select the c/windows/drivers folder -just the normal drivers, not active sync-
somehow it goes thru for me with a different driver that isn't what is needed
error 150:rom upgrade utility error
--------------------------------------------------------------------------------
I tried to install the new rom
http://forum.xda-developers.com/showthread.php?t=322110&page=15
but I faced this problem plz help me!
error 150:rom upgrade utility error
this rom upgrade utility does not design for your device
please get proper rom upgrade utility and try again
hussein_erol suggested
http://forum.xda-developers.com/show...43&postcount=2
I have installed the rom utility.but I still have the problem
whenever I make soft reset the boot loader start. I can't get to the phone
i made hard reset but it doesn't work.
I tried to make restore for the last backup it worked but when I make soft reset the boot loader shows.then I have to make hard reset again.
How can I return to the last configration.
same problem; i use MaUpgradeUt_noID.exe
plz
where are the experts in the forum?
don't do it on vista...
it only works on xp.
samer87 said:
plz
where are the experts in the forum?
Click to expand...
Click to collapse
Did you ever find a solution to the error message problem? I tried the ROM upgrade and had the same problem
Found it.
I'm assuming you're running vista.
First of all, connect your device when it's in bootloader.
Next, open Windows Mobile Device Center and in connection settings uncheck Allow USB Connections.
Next, goto contol panel-administrative tools-services and start "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity"
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Then, kill wmdc.exe with any taskmanager
Then try upgrading your rom.
Should work, worked for me
Credit goes to this guy here: http://forum.xda-developers.com/archive/index.php/t-291723.html
ezekiah said:
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Click to expand...
Click to collapse
This worked perfectly. Thanks. I'll never forget this tip.
Thank You !!!
Been searching everywhere for this solution (vista based)
appears to be updating now.. last time i play around with the base software 9installin offical t-mobile rom now)
Found it.
I'm assuming you're running vista.
First of all, connect your device when it's in bootloader.
Next, open Windows Mobile Device Center and in connection settings uncheck Allow USB Connections.
Next, goto contol panel-administrative tools-services and start "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity"
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Then, kill wmdc.exe with any taskmanager
Then try upgrading your rom.
Should work, worked for me
Credit goes to this guy here: http://forum.xda-developers.com/arch.../t-291723.html
Click to expand...
Click to collapse
where is Windows Mobile Device Center"?
where will i get "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity" on services??
do i have to install activesync??
kenji101 said:
where is Windows Mobile Device Center"?
where will i get "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity" on services??
do i have to install activesync??
Click to expand...
Click to collapse
"Windows Mobile Device Center" is the new name for "activesync" program in Vista.
the "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity" have to be started in services which you can start by running services.msc in the run box.
hi. when trying to update the driver vista doesnt allow me. it says that the best driver is already installed.. how can i change this so i can install this driver insteed?
Postolar said:
hi. when trying to update the driver vista doesnt allow me. it says that the best driver is already installed.. how can i change this so i can install this driver insteed?
Click to expand...
Click to collapse
Right click on the device and click "Update Driver Software"
Click "Browse my computer for driver software"
Below the textbox, click "Let me pick from a list of devices on my computer"
Now you can click "Have Disk" and choose the drivers you downloaded
Pick the device it pulls from the .inf file
Step through the rest of the wizard and you should be set.
The wording of the buttons may vary but should be similar to what you have (I'm running Vista).
Credit to lanerebel
http://forum.xda-developers.com/archive/index.php/t-291723.html
Worked for me.
I'm using the i-mate JasJar with Windows Vista Business Edition.
thx a lot!
Yeah !
Worked for me, on the old magician I had laying around!
Fantastic. Worked on My New O2 Xda Exec. Am now running Windows 6.5.
YYYYEAAAAAAAHHHHH!!!!!!
Jumping for joy
samer87 said:
error 150:rom upgrade utility error
--------------------------------------------------------------------------------
I tried to install the new rom
http://forum.xda-developers.com/showthread.php?t=322110&page=15
but I faced this problem plz help me!
error 150:rom upgrade utility error
this rom upgrade utility does not design for your device
please get proper rom upgrade utility and try again
hussein_erol suggested
http://forum.xda-developers.com/show...43&postcount=2
I have installed the rom utility.but I still have the problem
whenever I make soft reset the boot loader start. I can't get to the phone
i made hard reset but it doesn't work.
I tried to make restore for the last backup it worked but when I make soft reset the boot loader shows.then I have to make hard reset again.
How can I return to the last configration.
Click to expand...
Click to collapse
are you sure that your device is a Magician.? You might not notice HTC Charmer looks exactly the same with HTC Magician. double check you device first. make sure its HTC Magician. don't force to flash wrong device's you might cook your rom.
Similya said:
are you sure that your device is a Magician.? You might not notice HTC Charmer looks exactly the same with HTC Magician. double check you device first. make sure its HTC Magician. don't force to flash wrong device's you might cook your rom.
Click to expand...
Click to collapse
I have this problem too, and i know that this is a magician.
ezekiah said:
I'm assuming you're running vista.
First of all, connect your device when it's in bootloader.
Next, open Windows Mobile Device Center and in connection settings uncheck Allow USB Connections.
Next, goto contol panel-administrative tools-services and start "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity"
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Then, kill wmdc.exe with any taskmanager
Then try upgrading your rom.
Should work, worked for me
Credit goes to this guy here: http://forum.xda-developers.com/archive/index.php/t-291723.html
Click to expand...
Click to collapse
Seems to be the same thing with Win7...
same problem... any solution?
need help
i think i've bricked my htc magician while upgrading by cotulla's rom and now it doesn't turn on.....any help.....thx in advace
OK, a search on this gave me everything so I have to start this thread asking for a copy of the Getting Started CD. Sorry if it's already been discussed.
I can't get my pda to sync via usb. I deselect the "Enable advanced network functionality" and it still doesn't connect. Can someone post it or does anyone know where I can download one online? I'm hoping it has the correct drivers (Vista 64).
For vista you don't need the getting started CD... only the Windows Mobile Device center installed... also after the initial connection the Windows update should download it autimatically.
gnick666 said:
For vista you don't need the getting started CD... only the Windows Mobile Device center installed... also after the initial connection the Windows update should download it autimatically.
Click to expand...
Click to collapse
That's what all the instructions seem to say. I've uninstalled the existing devices, connected, installed, disconnect, uninstalled the device, install, etc and I still cannot get my pda to connect via usb. Can't seem to figure it out.
Check if activesync (on the PDA) connection settings... It should be set to connect via USB... Also you can download the WMDC from the M$ site...
gnick666 said:
Check if activesync (on the PDA) connection settings... It should be set to connect via USB... Also you can download the WMDC from the M$ site...
Click to expand...
Click to collapse
Yeap, did them both. To get USB as a cradle connection option in ActiveSync in the PDA, I have to select the "Enable advanced network functionality". However, if I do this, I cannot make a connection. I remember when I had my HTC TC, I had to deselect the "Enable advanced network functionality" in order to sync via USB. But when you do this, you don't get the option to sync via USB when cradled.
I think I'm missing the USB modem driver. I'm found the zip file but I'm still looking for installation instructions.
And I think you should reinstall your OS, because there are some serious issues on your side...
gnick666 said:
And I think you should reinstall your OS, because there are some serious issues on your side...
Click to expand...
Click to collapse
OS meaning PDA OS? I did that 3 times, twice with cooked WM6.1 and once back to WM2003. I was able to establish connection with my factory WM2003.
nah... I ment the Vista (did I mention a hard reset anywhere?)... in my school, we have several verisons (ultimate, business,...), i386, x64 alike and we didn't have any problems like the one you described...
Worth a try...
Try download and manually (instead of through Windows Update) the Windows Mobile Device Center v6.1 update for x64 versions of Vista.
Visit this link to download them:
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&displaylang=en
prank1 said:
Try download and manually (instead of through Windows Update) the Windows Mobile Device Center v6.1 update for x64 versions of Vista.
Visit this link to download them:
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&displaylang=en
Click to expand...
Click to collapse
Yeap, did that too. Thanks though, it's appreciated.
I wonder if it's my firewall settings. Time to explore that option. I remember the old ActiveSync sometimes required manual fixes to the firewall.
Guys - I'm going to end this thread because I guess the thread title doesn't accurately identifies my issue and I don't want to double post elsewhere.
I downloaded .net framework 3.5 to my htc touch so I can run the advanced configuration .exe that I found on touchxperience. When I tried to install the .net framework 3.5 the error msg said it was not a pocket pc application. I used the activesync through my pc, the .net framework 3.5 downloaded to my pc and the htc touch, it just wouldn't let me install. also, the advanced configuration error msg states that the htc touchs' .net 2.0 is not sufficient to install the utility.
Run the exe from your desktop pc not through your device
as corpse said already you have to run the exe from your computer.
Setup exe are run from the computer and your computer copies a cab file to your ppc (through activesync) and installs it on your ppc.
netcf runtimes
do u guys have a ready .cab file of netcf runtime. i cant use activesync on my vista pc and i cant use also the built in activesync of vista. it only sync using media player. it was not detected when i install the software
Please install first WINDOWS MOBILE DEVICE CENTER - that is the VISTA VERSION of ACTIVE SYNC.
Afterwards download the .NET COMPACT FRAMEWORK 3.5 REDISTRIBUTABLE from this link - READ THE INSTRUCTIONS in the OVERVIEW SECTION on that page carefully !!!
You can download the cab for net cf 3.5 here
http://www.programmersparadise.org/PPM/program/DownloadProgram.aspx?id=16
I lost the ability to go online after updating to 3.5 .NET!
canybody point me to a fix? I cant find one, without restoring to original .NET.
I have t the ATT TILT w/ WM6.
I tried the 6.1 update but it has too many bugs for me.
i download it onto my laptop with my phone plugged in but my phone doesnt register anythign
dirtsurfer said:
i download it onto my laptop with my phone plugged in but my phone doesnt register anythign
Click to expand...
Click to collapse
Her you are!
dirtsurfer said:
i download it onto my laptop with my phone plugged in but my phone doesnt register anythign
Click to expand...
Click to collapse
here you go
http://forum.xda-developers.com/showthread.php?t=347537
The easiest way i found to install it was on the Windows Marketplace...some game called "Hunting Lite"...Click to download and it and it should install NF 3.5 first if you haven't allready got it!
Should be no problem to install it with the cab file.
What happens when you run the cab?
Is there a way to check if I have the 3.5 framework? Under microsoft folder there is .netframework folder and it says 3.5.9198.00. is that is? I installed the Hunting Lite game like The_69_Eyes suggested, but I want to make sure it's there.
MirasHD2 said:
Is there a way to check if I have the 3.5 framework? Under microsoft folder there is .netframework folder and it says 3.5.9198.00. is that is? I installed the Hunting Lite game like The_69_Eyes suggested, but I want to make sure it's there.
Click to expand...
Click to collapse
go to startmenu>Settings>System>Remove Programs
look in the list for .netcf 3.5
or
The best end-user method to detect the .Net CF version on your device is using “cgacutil.exe”. You can find this app using a file explorer in the “\Windows” folder on your device. Running “cgacutil.exe” you’ll see the .Net CF versions installed on your device (i.e. a message showing [3.5.7121.0, 2.0.7045.0] means your device have .Net CF 3.5 Beta 2 and 2.0 SP2). If you cannot find “cgautil.exe” on your device, .Net CF is not installed.
yea gonna come back to this one
I've just install compact 3.5 on the PC and have taken the cab file out of the PC directory and install to my HD2 though this version is an old one, its not version 3.5.9198.00. Before people ask i have tried searching for 3.5.9198.00 and can't find it anywhere, can anyone post the newer version in a cab form?
mgdorbit said:
I've just install compact 3.5 on the PC and have taken the cab file out of the PC directory and install to my HD2 though this version is an old one, its not version 3.5.9198.00. Before people ask i have tried searching for 3.5.9198.00 and can't find it anywhere, can anyone post the newer version in a cab form?
Click to expand...
Click to collapse
+100000!!! I'm too!!..............???
thank ...........you!
Download the cab from antonio that is the 1 you want