error 150:rom upgrade utility error
--------------------------------------------------------------------------------
I tried to install the new rom
http://forum.xda-developers.com/showthread.php?t=322110&page=15
but I faced this problem plz help me!
error 150:rom upgrade utility error
this rom upgrade utility does not design for your device
please get proper rom upgrade utility and try again
hussein_erol suggested
http://forum.xda-developers.com/show...43&postcount=2
I have installed the rom utility.but I still have the problem
whenever I make soft reset the boot loader start. I can't get to the phone
i made hard reset but it doesn't work.
I tried to make restore for the last backup it worked but when I make soft reset the boot loader shows.then I have to make hard reset again.
How can I return to the last configration.
same problem; i use MaUpgradeUt_noID.exe
plz
where are the experts in the forum?
don't do it on vista...
it only works on xp.
samer87 said:
plz
where are the experts in the forum?
Click to expand...
Click to collapse
Did you ever find a solution to the error message problem? I tried the ROM upgrade and had the same problem
Found it.
I'm assuming you're running vista.
First of all, connect your device when it's in bootloader.
Next, open Windows Mobile Device Center and in connection settings uncheck Allow USB Connections.
Next, goto contol panel-administrative tools-services and start "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity"
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Then, kill wmdc.exe with any taskmanager
Then try upgrading your rom.
Should work, worked for me
Credit goes to this guy here: http://forum.xda-developers.com/archive/index.php/t-291723.html
ezekiah said:
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Click to expand...
Click to collapse
This worked perfectly. Thanks. I'll never forget this tip.
Thank You !!!
Been searching everywhere for this solution (vista based)
appears to be updating now.. last time i play around with the base software 9installin offical t-mobile rom now)
Found it.
I'm assuming you're running vista.
First of all, connect your device when it's in bootloader.
Next, open Windows Mobile Device Center and in connection settings uncheck Allow USB Connections.
Next, goto contol panel-administrative tools-services and start "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity"
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Then, kill wmdc.exe with any taskmanager
Then try upgrading your rom.
Should work, worked for me
Credit goes to this guy here: http://forum.xda-developers.com/arch.../t-291723.html
Click to expand...
Click to collapse
where is Windows Mobile Device Center"?
where will i get "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity" on services??
do i have to install activesync??
kenji101 said:
where is Windows Mobile Device Center"?
where will i get "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity" on services??
do i have to install activesync??
Click to expand...
Click to collapse
"Windows Mobile Device Center" is the new name for "activesync" program in Vista.
the "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity" have to be started in services which you can start by running services.msc in the run box.
hi. when trying to update the driver vista doesnt allow me. it says that the best driver is already installed.. how can i change this so i can install this driver insteed?
Postolar said:
hi. when trying to update the driver vista doesnt allow me. it says that the best driver is already installed.. how can i change this so i can install this driver insteed?
Click to expand...
Click to collapse
Right click on the device and click "Update Driver Software"
Click "Browse my computer for driver software"
Below the textbox, click "Let me pick from a list of devices on my computer"
Now you can click "Have Disk" and choose the drivers you downloaded
Pick the device it pulls from the .inf file
Step through the rest of the wizard and you should be set.
The wording of the buttons may vary but should be similar to what you have (I'm running Vista).
Credit to lanerebel
http://forum.xda-developers.com/archive/index.php/t-291723.html
Worked for me.
I'm using the i-mate JasJar with Windows Vista Business Edition.
thx a lot!
Yeah !
Worked for me, on the old magician I had laying around!
Fantastic. Worked on My New O2 Xda Exec. Am now running Windows 6.5.
YYYYEAAAAAAAHHHHH!!!!!!
Jumping for joy
samer87 said:
error 150:rom upgrade utility error
--------------------------------------------------------------------------------
I tried to install the new rom
http://forum.xda-developers.com/showthread.php?t=322110&page=15
but I faced this problem plz help me!
error 150:rom upgrade utility error
this rom upgrade utility does not design for your device
please get proper rom upgrade utility and try again
hussein_erol suggested
http://forum.xda-developers.com/show...43&postcount=2
I have installed the rom utility.but I still have the problem
whenever I make soft reset the boot loader start. I can't get to the phone
i made hard reset but it doesn't work.
I tried to make restore for the last backup it worked but when I make soft reset the boot loader shows.then I have to make hard reset again.
How can I return to the last configration.
Click to expand...
Click to collapse
are you sure that your device is a Magician.? You might not notice HTC Charmer looks exactly the same with HTC Magician. double check you device first. make sure its HTC Magician. don't force to flash wrong device's you might cook your rom.
Similya said:
are you sure that your device is a Magician.? You might not notice HTC Charmer looks exactly the same with HTC Magician. double check you device first. make sure its HTC Magician. don't force to flash wrong device's you might cook your rom.
Click to expand...
Click to collapse
I have this problem too, and i know that this is a magician.
ezekiah said:
I'm assuming you're running vista.
First of all, connect your device when it's in bootloader.
Next, open Windows Mobile Device Center and in connection settings uncheck Allow USB Connections.
Next, goto contol panel-administrative tools-services and start "Windows Mobile Device Connectivity" and "Windows Mobile Device 2003 Connectivity"
Next, goto device manager and find your device and update the driver to the one from http://mahmood1.com/Documents/USBAS.rar. The driver is wceusbsh.inf.
Then, kill wmdc.exe with any taskmanager
Then try upgrading your rom.
Should work, worked for me
Credit goes to this guy here: http://forum.xda-developers.com/archive/index.php/t-291723.html
Click to expand...
Click to collapse
Seems to be the same thing with Win7...
same problem... any solution?
need help
i think i've bricked my htc magician while upgrading by cotulla's rom and now it doesn't turn on.....any help.....thx in advace
Related
Dear All
I have a very strange problem here...i was using the Jwright WM6 rom till this morning with no sccuess in getting it to connect to my Vista laptop by all means...the only thing i could do is to connect to my desktop pc which has Windows XP & it connects succefully...so i thaught it's something related to the crossbow not being compatible with vista WMDC
Till this morning a friend came to me with his Universal running Jwright 1.90.96 WM5 to install a program so i connected to the Vista WMDC & it worked like a charm...so i downgraded mine to the same WM5 version he is running & i was shocked when it didn't connect & kept trying to connect till it gave me red error sign with no explanation
I used the same USB port, the same original cable on the same laptop under the same windows user...
Any explanation for that????!!!
I really need to sync with my vista laptop as it's my main PC at both work & home...
Thanks All
Have you updated WMDC from beta3, coz that has sorted alot of problems.If yes, try creating another user account, or try logging in as an admin, and connect wm device from there.
otherwise, REINSTALL VISTA, sorry to tell you that, but this is the easiest and the quickest way some times. and i mean it...
What kind of built of Vista are you running?
svyatko said:
Have you updated WMDC from beta3, coz that has sorted alot of problems.If yes, try creating another user account, or try logging in as an admin, and connect wm device from there.
otherwise, REINSTALL VISTA, sorry to tell you that, but this is the easiest and the quickest way some times. and i mean it...
Click to expand...
Click to collapse
i have updated to the latest WMDC version available on the microsoft site after removing the one that originally came with the windows as instructed by microsoft...i also tried creating another admin account & still no success !!!
this morning i tried to remove & reinstall the WMDC but still nothing changed..i hope that i won't be forced to reinstall Vista again as this is a very painful option to me after the mass amount of programs i have installed!!!
duanes said:
What kind of built of Vista are you running?
Click to expand...
Click to collapse
i'm using windows vista ultimate 6.6.6000 build 6000
I've flashed roms on my phone before before I had Vista...and now I can't! It always says that a problem has occurred during the process!
Plz help!
dcatus said:
I've flashed roms on my phone before before I had Vista...and now I can't! It always says that a problem has occurred during the process!
Plz help!
Click to expand...
Click to collapse
winVista still has some driver incompatibility,it requires some driver updates.Although,some guys have flashed via vista but used VMWare Workstation 6 .Others downloaded drivers from microsoft site to update the vista drivers and flashed,but still multiple problems have been reported afterwards while upgrading/downgrading,therefore,it's always better and recommended to flash in WinXP SP2.
Cheers
I can vouch for VMware Work Station 6(with winxp virtualized),
I've used it just last week to flash my G4 wizard with Blackdiamond 3.0 using G4 Soft spl
zabardast_1 said:
winVista still has some driver incompatibility,it requires some driver updates.Although,some guys have flashed via vista but used VMWare Workstation 6 .Others downloaded drivers from microsoft site to update the vista drivers and flashed,but still multiple problems have been reported afterwards while upgrading/downgrading,therefore,it's always better and recommended to flash in WinXP SP2.
Cheers
Click to expand...
Click to collapse
Noticed this same thing when using my dads laptop with Vista Home Premium to flash a Rom to my phone. It wouldn't work at all... It actually gave me an error message telling me to upgrade my drivers but that was all. It said Drivers Incompatible. Please Update.
I just let it alone and went back to my girlfriends laptop to fix my phone.
it works well...
Not sure if your searching ever led to this thread where sp3dev explains his steps that work for me every single time; ( i don't have to repeat step 1 obviously )
1. install the correct usb drivers ( see original thread or in my attachment )
2. disable "usb connections" in wmdc
3. put device in bootloader ( camera+side+reset ) & attach device
4. kill wmdc.exe process
5. use the correct RUU util ( i attached one that works for me )
cheers!
native12 said:
Not sure if your searching ever led to this thread where sp3dev explains his steps that work for me every single time; ( i don't have to repeat step 1 obviously )
1. install the correct usb drivers ( see original thread or in my attachment )
2. disable "usb connections" in wmdc
3. put device in bootloader ( camera+side+reset ) & attach device
4. kill wmdc.exe process
5. use the correct RUU util ( i attached one that works for me )
cheers!
Click to expand...
Click to collapse
Wizard Products can't flash on Windows Vista.
I using Vista but installed VMware Machine 6.0 and install WinXP on this VM and good work.
native12 said:
Not sure if your searching ever led to this thread where sp3dev explains his steps that work for me every single time; ( i don't have to repeat step 1 obviously )
1. install the correct usb drivers ( see original thread or in my attachment )
2. disable "usb connections" in wmdc
3. put device in bootloader ( camera+side+reset ) & attach device
4. kill wmdc.exe process
5. use the correct RUU util ( i attached one that works for me )
cheers!
Click to expand...
Click to collapse
Question here is not that 'It can be done or can't be done ?',read my post where I said yes,guys have done it and are doing,but it requires some driver updates and some have done through VMWare,the only thing is that instead of going through all that updates and launching Vitual Machine process and as there has been reported problems afterward, "IS IT WORTH TO UNDER GO ALL THAT TROUBLE" when it's simpler and effortless to upgrade through WinXP ?
OK, a search on this gave me everything so I have to start this thread asking for a copy of the Getting Started CD. Sorry if it's already been discussed.
I can't get my pda to sync via usb. I deselect the "Enable advanced network functionality" and it still doesn't connect. Can someone post it or does anyone know where I can download one online? I'm hoping it has the correct drivers (Vista 64).
For vista you don't need the getting started CD... only the Windows Mobile Device center installed... also after the initial connection the Windows update should download it autimatically.
gnick666 said:
For vista you don't need the getting started CD... only the Windows Mobile Device center installed... also after the initial connection the Windows update should download it autimatically.
Click to expand...
Click to collapse
That's what all the instructions seem to say. I've uninstalled the existing devices, connected, installed, disconnect, uninstalled the device, install, etc and I still cannot get my pda to connect via usb. Can't seem to figure it out.
Check if activesync (on the PDA) connection settings... It should be set to connect via USB... Also you can download the WMDC from the M$ site...
gnick666 said:
Check if activesync (on the PDA) connection settings... It should be set to connect via USB... Also you can download the WMDC from the M$ site...
Click to expand...
Click to collapse
Yeap, did them both. To get USB as a cradle connection option in ActiveSync in the PDA, I have to select the "Enable advanced network functionality". However, if I do this, I cannot make a connection. I remember when I had my HTC TC, I had to deselect the "Enable advanced network functionality" in order to sync via USB. But when you do this, you don't get the option to sync via USB when cradled.
I think I'm missing the USB modem driver. I'm found the zip file but I'm still looking for installation instructions.
And I think you should reinstall your OS, because there are some serious issues on your side...
gnick666 said:
And I think you should reinstall your OS, because there are some serious issues on your side...
Click to expand...
Click to collapse
OS meaning PDA OS? I did that 3 times, twice with cooked WM6.1 and once back to WM2003. I was able to establish connection with my factory WM2003.
nah... I ment the Vista (did I mention a hard reset anywhere?)... in my school, we have several verisons (ultimate, business,...), i386, x64 alike and we didn't have any problems like the one you described...
Worth a try...
Try download and manually (instead of through Windows Update) the Windows Mobile Device Center v6.1 update for x64 versions of Vista.
Visit this link to download them:
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&displaylang=en
prank1 said:
Try download and manually (instead of through Windows Update) the Windows Mobile Device Center v6.1 update for x64 versions of Vista.
Visit this link to download them:
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&displaylang=en
Click to expand...
Click to collapse
Yeap, did that too. Thanks though, it's appreciated.
I wonder if it's my firewall settings. Time to explore that option. I remember the old ActiveSync sometimes required manual fixes to the firewall.
Guys - I'm going to end this thread because I guess the thread title doesn't accurately identifies my issue and I don't want to double post elsewhere.
Does anyone know how to set up your g-mail without having the data plan from t-mobile. I am an att user and cannot figure out the answer to this. Whenever I try my g-mail account gets rejected and i just get a message that reads "There is a problem communicating with the google servers: This could be a temporary problem or your SIM card may not be provisioned for data services." I cannot enable wi-fi because i can't get past this stupid g-mail setup to get to the actual home screen.
Search google for AT&T APN settings. Or go to http://androidcommunity.com/forums/f41/how-to-use-your-g1-on-at-and-t-without-a-data-plan-8735/
Justin Mgbeokwere said:
Does anyone know how to set up your g-mail without having the data plan from t-mobile. I am an att user and cannot figure out the answer to this. Whenever I try my g-mail account gets rejected and i just get a message that reads "There is a problem communicating with the google servers: This could be a temporary problem or your SIM card may not be provisioned for data services." I cannot enable wi-fi because i can't get past this stupid g-mail setup to get to the actual home screen.
Click to expand...
Click to collapse
See this:
http://forum.xda-developers.com/showthread.php?t=452316
JF i was trying to help him yesterday... sent him to your thread and he was having problems or said it was not working... if you look in the thread he tried but got stuck. :| since i dont know that method im no help
Thanks JF but I'm using vista so the new hardware wizard does not appear vista just automatically installs the drivers. When i uninstall them and attempt to apply the new ones it just automatically installs everything again. I do not know how to stop the automatic instillation of the standard driver for the G1.
Justin Mgbeokwere said:
Thanks JF but I'm using vista so the new hardware wizard does not appear vista just automatically installs the drivers. When i uninstall them and attempt to apply the new ones it just automatically installs everything again. I do not know how to stop the automatic instillation of the standard driver for the G1.
Click to expand...
Click to collapse
neither do I. I don't use vista . sorry I can't help
Justin Mgbeokwere said:
Thanks JF but I'm using vista so the new hardware wizard does not appear vista just automatically installs the drivers. When i uninstall them and attempt to apply the new ones it just automatically installs everything again. I do not know how to stop the automatic instillation of the standard driver for the G1.
Click to expand...
Click to collapse
Go into device manager > find the device > right mouse click > click update driver > then browse my computer > find the .inf file > then let it install > then use the device. I'm on Windows 7 M1, it's essentially the same.
card13 said:
Go into device manager > find the device > right mouse click > click update driver > then browse my computer > find the .inf file > then let it install > then use the device. I'm on Windows 7 M1, it's essentially the same.
Click to expand...
Click to collapse
Vista just says that "windows has determined that the drivers for this device are up to date" and will not let me install any new ones or change the old ones.
What ver of Vista r u on?
card13 said:
What ver of Vista r u on?
Click to expand...
Click to collapse
Windows vista home premium
Then ou could try deleting the inf file coppied into the driver dir. or just keep trying. Everytime I did it, it work, course I had Vista Enterprise.
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
[email protected] said:
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
Click to expand...
Click to collapse
what os?
try a new cable, or try plugging the cable into a different usb port.
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
You could just update to the latest HTC ROM from the official website if your phone is still under warranty, btw thats what i did but it didn't help. Note, that i'm running Windows 7 as my OS if anyone want to know this information to help solve the problem. Thanks in advance.
[email protected]
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
Settings-->Connections-->USB to PC and Uncheck Enable faster data Synchronization
I have the same problem.
in my situation i tried to recover usb-flash and flash a nokia phone. For both things programs installed their own drivers. Even after I deinstalled the software I probably still have their drivers on my pc. That's why I can't sync my phone...
is there a tool to manage installed drivers?
or the other way out is to reinstall windows 7
anyone willing to help?
This solution worked for me:
Thanks to Scubamike
copy and paste from
http://social.microsoft.com/Forums/...c/thread/7a6516e2-9a46-4e1f-b689-1aa7dc2bda64
I found a different solution that worked for me: On my phone I clicked start/programs/active sync/options and deleted all the old PC connections that were displayed. In fact, you could probably just delete ALL the PC connections displayed and start from scratch. You'll just have set up another sync partnership in WMDC when you plug it in. Let me know if this helps.
it is to easy! should work ALWAYS:
Make sure "Advanced network functionality" is switched off in the USB to PC settings then:
go to activesync, menu, connections, disable "connect via USB" off, press "ok" go back to connections, enable "connect via usb" press "ok" unplug and replug your cable. and all works.
greetings
i had trouble with a 6.5.3 rom i just cooked. had to uninstall, reboot, reinstall wmdc, then i synced okay.
I have the last original rom and win 7 and with removing all remembered connections on the pda, it connected immidiatly. Thank you for the help
i have been all over the microsoft forums to no avail. i recently updated my laptop to win7, and have a fuze running 6.1 mobile. when i connect my fuze to the laptop the laptop recognizes it as it begins to charge, but then nothing. i try to open win mobile device center and this is the error message i get C:\windows\system32\rapistub.dll is either not designed to run on windows or it contains errors. I have uninstalled and reinstalled 3 times and also tried different usb ports on my laptop. If anyone can help that would be awesome