Hi..I have a Blackstone with an email problem Is there a way to turn off outlooks "auto" settings? Im trying to get yahoo mail working (the payed for verison) with pop3. However when I setup the account in outlook it automatically detects yahoo settings for the free version and Im unable to change from IMAP4 to POP...someone suggested manual setup but I cant figure it out. Ive also tried making an account like @yaahhoo.com then going back and changing but it will not allow the original email to be changed. Any help appreciated.
THANKS!!
on the second page of "setup E-Mail" should be the field "try to get e-mail settings automatically from the internet"
try to unmark this and now you can add your settings manually....
Related
has anybody successfully synced there fone to gmail???
cause i have run into a bit of a problem my fone checks gmail every 15 mins and i get my email and everthing but i cant send email. i use recent:username so that it doesnt deleat the messages on my fone. anyone?? know how to fix these?
I am having the same problem and I am looking for a fix right now. It's due to the port #"s that are required by gmail to send and recieve email through there servers.
I have it working...
what are your settings?
my outgoing mail server is 'smtp.gmail.com:465' then in the Options menu I have 'Outgoing mail requires authentication' selected, and 'use separate settings' is NOT selected.
Maybe try that...I know the Outgoing Mail requires Authentication needs to be selected in order for you to be able to send mail...
if I could suggest maybe searching the posts for a direct push email service, many of which are free, getting that setup, then simply forwarding all of your gmail to the direct push account. making sure it leaves copies in ur gmail inbox for checking/archiving later from ur pc.
it works fine for me on my phone,i can send and recieve flawlessly. my outgoing server is smtp.gmail.com:465 as well
ok thanks u guys it was easy i had the 'use separate settings' selected. but once i unselected it.. it worked.. so u guy know of any good free service for pushing gmail, that works good??
smileyaj2005 said:
ok thanks u guys it was easy i had the 'use separate settings' selected. but once i unselected it.. it worked.. so u guy know of any good free service for pushing gmail, that works good??
Click to expand...
Click to collapse
mail2web offers free push service, and you can forward your gmail from the account options to a mail2web account. I was doing that for a while and it worked extremely well! Website can be found at: http://live.mail2web.com
you know, its funny. i was just working on this today as well.
i have the settings that pocket outlook found for me:
incoming mail: pop.gmail.com:995
outgoing mail: smtp.gmail.com:465
domain is blank. i have the use seperate settings unticked etc..
but it keeps asking me for my username and password and domain
i am using the correct username and password as far as i can tell. connects okay on my pc with that login. but it keeps failing on my wizard. do i need to put something in the domain area?
wergeld
So after trying what seems like an endless number of radios, I'm unable to send emails from my phone using Gmail. Before flashing Hyperdragon III onto my phone, I was able to send/receive email no problem. Now I'm only able to receive, can't send email at all - says Unable to send message(s) - error synchronizing.
If someone could point me in the right direction, that would be awesome. This is starting to get frustrating.
start, settings, connections, manage existing, proxy settings, un-check this network uses a proxy server to connect to the internet
Checked that and the option to use a proxy is already disabled. Any other ideas? Definitely appreciate the suggestion tho.
PS. I also have the cabs to enable/disable the cingular/att proxy and neither makes a difference. Before changing the ROM, emails would send regardless of which setting I used. Hope this helps.
Dbagjones said:
Checked that and the option to use a proxy is already disabled. Any other ideas? Definitely appreciate the suggestion tho.
PS. I also have the cabs to enable/disable the cingular/att proxy and neither makes a difference. Before changing the ROM, emails would send regardless of which setting I used. Hope this helps.
Click to expand...
Click to collapse
Edit Account setup, then keep hitting mext until you get to the outgoing server settings and after "smtp.gmail.com" add ":587" to the end.
Worked immediately for me. It has to do with the new server authentication that wm6.1 or something requires.
Hope that fixes your problem! let me know if I need to be more specific, I'm at school and I gotta run.
Tried that and no dice. Does seem to be a WM6.1 issue though from what I've been reading.
maybe you should flash different HyderDragon...as there are two new versions came out. Or maybe try to flash the radio...Do you know what radio version you were using before flashed to HDIII?
Don't think it's the radio at this point. I've tried most of them in an attempt to fix the problem, but the 6.0-6.1 upgrade seems to be the culprit.
Dbagjones said:
Don't think it's the radio at this point. I've tried most of them in an attempt to fix the problem, but the 6.0-6.1 upgrade seems to be the culprit.
Click to expand...
Click to collapse
it prolly is, i mean since its release theres been all sorts of bugs reported ( as well as with HPD III, hence why i wont flash it ) but imo what u should do is start over..
re-flash, get ur new radio and take it from there
Jstar
try running the remove hidden proxy cab and then run the restore hidden proxy cab. i had this problem with gmail before and i think thats how i fixed it. it has nothing to do with the radio your using. just go to at&ts site and look up the connection settings and make sure everything makes sense...
If that doesn't work.
You could always try this.
I seriously doubt this is a radio related issue
http://mail.google.com/support/bin/answer.py?hl=en&answer=78886
Google said:
To configure IMAP for your Windows Mobile 6 device, just follow these steps:
Enable IMAP in your Gmail settings.
Open the Start menu and select Programs > Messaging > New E-mail Account.
Enter your Gmail address (including '@gmail.com') in the E-mail Address field*. Google Apps users, enter your full address in the format '[email protected]_domain.com'*.
* Windows Mobile 6.1 users: Enter an unintelligible email address (such as '[email protected]') at this step. This will bypass the automatic configuration for POP access.
Uncheck the box that asks to get settings automatically from the Internet and select Next.
Select Internet e-mail as your email provider in the drop-down menu.
Enter your name as you want it to appear in sent emails.
Enter a descriptive name for the email account and select Next.
Enter 'imap.gmail.com' in the Incoming Mail Server field.
Select IMAP4 as the Account type from the drop-down menu and select Next.
Enter your full email address (including '@gmail.com' or '@your_domain.com') and password.
Select Next.
Enter 'smtp.gmail.com' in the Outgoing (SMTP) Mail Server field.
Make sure that the Outgoing server requires authentication box is checked.
Select the Advanced Server Settings link.
Make sure that the Require SSL box is checked for both incoming and outgoing emails.
Select The Internet as the network connection from the drop-down menu.
Select Done and then Next.
Select how often you want your phone to send/receive emails from the drop-down menu.
For more download options, select the Review all download settings link.
Select Finish.
Check our recommended client settings, and adjust your client's settings as needed.
Click to expand...
Click to collapse
Checked that already, too. I'm not exactly a total noob I've had all my stuff working perfectly until upgrading to WM 6.1. The Hyperdragon rom was after the initial upgrade from 6-6.1. Email sending (receiving is fine) through my Gmail accounts just doesn't seem to work now. I suppose I can go back to stock, but... *shudder*
Hey, I just got the fuze and setup my gmail. I can receive, but can't send. Whey it tried to send I get the message "The messag(s) could not be sent. Check that you have the network coverage and that yhour account information is correct. Then try resending".
I did verify my account info was correct and I double checked the gmail settings. Also I thought maybe the proxy was active so I did run the disable proxy.
Anyone else have this issue?
piggity said:
Hey, I just got the fuze and setup my gmail. I can receive, but can't send. Whey it tried to send I get the message "The messag(s) could not be sent. Check that you have the network coverage and that yhour account information is correct. Then try resending".
I did verify my account info was correct and I double checked the gmail settings. Also I thought maybe the proxy was active so I did run the disable proxy.
Anyone else have this issue?
Click to expand...
Click to collapse
If you have AT&T set your SMTP to: CWMX.COM
This is a known, and now fixed Microsoft problem with WM 6.1 Here is the link to the download on the Microsoft site.
http://www.microsoft.com/downloads/...d2dd-44f2-86e5-1e53aad7fb7a&displaylang=en&tm
Hope this helps,
Brian
I got the same error trying to send an email to Gmail IMAP server over a 3G connection. Does the WinMo 6.1 problem/fix apply to Gmail IMAP the same as it does to POP3 accounts?
Sure does.
Brian
Thanks for the verification, Brian. I applied the fix, and Gmail IMAP is working as it should.
Rick
This forum is a treasure...
Confirmation - It Works
This resolved the GMail outbound email issue for me as well.
Thanks to all of you who help others around here!
Okay, so I'm having this problem as well. I installed the Microsoft update, but like ... it's still not working.
I recently switched from a Tytn II/Tilt and Touch Pro/Fuze. I had email working on my Tilt, but it won't let me send on the Fuze. I am 100% sure all the settings are correct, and like I said, the update is installed. Aside from the proxy server thing, I have no ideas of how to fix this. But I don't know how the proxy server thing works.
MutatedSpleen said:
Okay, so I'm having this problem as well. I installed the Microsoft update, but like ... it's still not working.
I recently switched from a Tytn II/Tilt and Touch Pro/Fuze. I had email working on my Tilt, but it won't let me send on the Fuze. I am 100% sure all the settings are correct, and like I said, the update is installed. Aside from the proxy server thing, I have no ideas of how to fix this. But I don't know how the proxy server thing works.
Click to expand...
Click to collapse
What provider do you have, what account are you trying to set up, what ROM are you on, etc, etc, etc.....
I hope you weren't expecting someone to answer your vague question...
Yes, you mentioned Tilt and Fuze which tells me that your on AT&T but you really haven't provided enough info to assist you.
For your proxy, go to Start\Settings\Connection\Connections\Manage Existing Connections\Proxy Settings and check "TAhis network connects to the internet" uncheck "this network uses a proxy" and clear out any proxy listed.
Also go to Advanced\Select Networks and set both to MediaNet.
Depending on WHAT e-mail your trying to set up, check your settings for the outgoing server.
For example default settings for Yahoo put in smtp.mobile.mail.yahoo.com but I have to remove .mobile to get it to send.
Fuze and gmail
I have pop enabled for gmail--do I need imap instead?
I can't seem to connect--it rejects my password.
Hotmail works.
Pop3 through Lunarpages server works fine.
I can access my gmail just fine on my desktop computer.
oopsss, it decided to start working..didn't do anything different, not even reboot. persistence pays..
Fuze--change default email account?
How do I change my default email account?
I have several apps that send email to the default email set in Windows, and they all end up in the Outlook E-mail account Outbox, which is the Exchange one, and I don't use it.
Can't delete or change it. AT&T support was clueless.
I have 2 identical Fuzes, both have been upgraded to NATF's 2.2. One is working just fine, but one refuses to send email to a GMAIL account. I've checked the settings and it can get mail just fine, but can't send. Does anyone knoe of any problems with GMAIL and the Fuze?
For my Gmail account to send emails, I had to:
In the email tab, select accounts ->accounts -> Menu, Options -> select Gmail -> edit account setup-> next,next,next -? Advanced Server Settings -> Require SSL for Incomming and Outgoing email checked.
I think that should fix your issues, the "Auto configuration" got everything fine except for that settings...
double check the email account in question to see if pop3 access has been enabled, its in the gmail options (log in to your gmail account via pc and check it).
I had this problem yesterday and it could be the same.
Apparently there's a bug in WM6.1 that if the server doesn't answer once, it cycles to a blank server name. There's a fix out for it.
http://www.microsoft.com/downloads/...2E-D2DD-44F2-86E5-1E53AAD7FB7A&displaylang=en
I orginally fixed the problem by deleting the account and re-making it but this is supposed to be a permanent fix.
Switching to SSL didn't help. I'm using IMAP vs POP but I'll check that.
Hi,
Been trying to figure this out for a while. I have my exchange setup w/ google for email and that is working fine. However, when I go into the advanced options that are under the Email Sync Options when you're configuring the server settings for ActiveSync, they are grayed out.
I'm not concerned with the security options there. It is the "My e-mail address" field that is grayed out and I can't put my email address there to see if that prevents sending an email to myself when I hit the Reply All button.
Are there any registry settings I can tweak to fix this? I tried looking around and I can't find what I'm looking for.
I'll get a screen shot when I can find my camera. MyMobiler wont work because I can't get to the settings when i got activesync going through USB.
Thanks for the help~
edit: I deleted the sync relationship and recreated it. I was able to enter my email address then before I finished setting up the sync. However....my email address is in the field.. but it's grayed out!