Why wnen I receive sms, I can't stop the sound of playing melody? I push any key but nothing happens.
for me hangup-(redbutton) on homescreen after opened the message solved this maybe youd change your melody!(as i did!)
Yes, the red hang-up button stops the SMS sound!
There is no difference which melody is playing. I push ANY key, but it does nothing.
Related
I just received my 750v today. The problem I'm having is that when a call comes in, I'm used to pressing volume up or down key to have the ringer and/or vibrate silenced. This works fine on my treo 650. When I do this on my 750v, it just lowers or raises the volume but that's it. My ROM is 1.12.0a.00. Any ideas on this??
I don't own one yet but I know there's a switch on top to totally silence the unit, but vibrate will continue to work as long as it is activated. This has been a trademark of Treos.
Every treo I've had, I've been able to silence both the ringer and the vibration simply by pushing either the volume or up down key. Yes the switch silences the entire unit but I like silencing individual calls so the ringer isn't going off more than what is needed to let me know someone is calling.
For Treo 750v, it is very straight forward but it took me a week to realize it. To silence the ringer when calls come in, just press any key on the QWERTY keypad.
On my treo 650, I could silence the ringer by simply pressing the volume key. This was very convenient as I didn't have to take the phone out of the case which saved time as well as having the ringer go off minimally. If I have to take the phone out of my pocket or a case, the ringer basically goes off long enough for EVERYONE in the room to notice. Anyone know of any fixes for this? My treo 650's original firmware did the same thing, then I updated the firmware and voila, it worked the way I wanted it to.
Silence a Treo 750V
In order to be able to silence and stop vibrations of the 750V you will need to do the following
from the main screen select preferences then phone settings, this as long as you have a sim card in the phone will take you to settings screen you then need to select the ring tones link for incoming calls, you then need to work your way through the list of possible events suck as phone:known caller, phone:missed call, phone:unknown caller and then delsect the vibrate when ringer is off option, this will stop the phone vibrating when ringer off and funny enough ...
To silence a call on the 750 (Cingular), all you do is press the spacebar.
I recently built a ROM using mUn's 5.2.968 (Build 17217) and the kitchen. It has been working fine but today I managed to hit the volume control and put the phone on vibrate. Anyway I put it back on ring but it seems to be stuck on Vibrate. I have the volume control set to the middle for the PDA, and one step higher for the phone, also with the phone screen on and click menu, options it is set to Ring Type 'Ring' and Ring Tone to one of the built-in files. However it refuses to ring when I get an incoming call; it just vibrates
Any ideas?
Thanks
Andy
This actually happens periodically in all WM6 roms I've tried. For me, I've only noticed this happen when I've pressed and held the Comm button to switch to Vibrate and then switch it back. To fix the problem you can either go to Settings > Phone and play your ring tone (just hit the play arrow) or do a soft reset.
I used to see this more on NTS and XPlore 1.1 than I've seen on Faria Vanilla (not sure I ever saw it there) or on my Crossbow Reloaded (I've seen it once) but to be honest after realizing it appeared to be tied to the press and hold of the COmm button to enable and disable vibrate, I've pretty much quit using that feature. I don't know that I've ever seen it happen if I drag the volume (not ring volume but phone volume) to Vibrate or off and then back.
I've chalked it up to one of the "bugs"/"features" of WM6...
I have enabled the feature Settings > Motion & Gestures > Mute.
"to mute incoming calls and alarms, place hand on screen or turn the phone over".
This doesn't seem to work for SMS notification sounds.
I use a fairly long, loud notification since I work in a loud machine shop, but when I'm in a quiet area sometimes I need to cut off the notification sound mid-stream.
I've tried the gestures to cover screen with hand touching, flipped the phone over, pressed home button, pressed volume down button.
Nothing stops the notification sound and it plays in it's entirety.
Is there a way to stop the notification sound that is currently playing for an incoming SMS or Gmail message?
Hi all,
there's something strange or some I'm missing about this simple function. I'm used to my old Gear Fit functionality that turn off watch screen and vibration if I refuse an incoming call by pressing any phisical button... with GS2 smartwatch is not the same: pressing home button just stop vibrating on incoming call, but screen still remains lit , is it intended and there's any way to let it turn off when incoming call is manually refused?
Thanks all for support.
When I place a call, I have like 1-2 seconds to press the speakerphone button before the dial-pad slides up over the button. That's way too short of a time and causes me to have to click the "X" to close the dial-pad, so I can see the speakerphone button then press it.
Very bad UI - there is plenty of room to display the dialpad and commonly used functions like the speakerphone, etc.
So, is there any mod/setting that would prevent the keypad from automatically covering all the other buttons behind it after 1-2 seconds of a call connect?
JohnC said:
When I place a call, I have like 1-2 seconds to press the speakerphone button before the dial-pad slides up over the button. That's way too short of a time and causes me to have to click the "X" to close the dial-pad, so I can see the speakerphone button then press it.
Very bad UI - there is plenty of room to display the dialpad and commonly used functions like the speakerphone, etc.
So, is there any mod/setting that would prevent the keypad from automatically covering all the other buttons behind it after 1-2 seconds of a call connect?
Click to expand...
Click to collapse
Dial pad does not (re)appear uncommanded on my stock device. Something else is triggering this behavior.
I think I know what happened...
If I dial a "contact", then the dialpad does not automatically pop-up.
But if the dialpad is showing, and I tap and hold on the "1" key to call my voice mail, the dialpad will disappear, then the options buttons appear (including the speakerphone button), but as soon as my phone connects to voicemail, it pops-up the dial pad and covers up the speakerphone button.
I can sort of understand why it might be doing this (because you'll probably need the dialpad to interact with voicemail), but often I like to listen to my voicemail on speakerphone, and just a 1-2 second window to tap the speakerphone button before the dial-pad appears is not enough time.