Related
Before someone comes and flames me for creating a new thread (*hide from DaveShaw*) let me explain:
I have created a Wiki page for users who are stuck at the SPL (a.k.a Bootloader, Tri-Colour screen etc.):
Kaiser_stuck_at_bootloader
This has helped out a number of users who have become stuck at the SPL but every day I see more and more users getting stuck and creating new thread, or going off topic in other threads.
What to do if you get stuck:
Read the Wiki Page and follow the advice: Kaiser_stuck_at_bootloader
If you have tried all the steps in the wiki and still have a problem, read the feedback from other users in this thread and any advice I give out in this thread.
If you are still having problems please post all the details you can about what you have done and what version ROM / Radio / SPL you are running in this thread.
Credits:
Everyone I credited in the Wiki page.
mrdo who followed my advice and donated.
P1Tater for stickying this thread.
cmonex who seems to teach me something each day.
Thanks
Dave
Nice thread. Worth a sticky since it seems to be happening quite frequently lately
P1Tater said:
Nice thread. Worth a sticky since it seems to be happening quite frequently lately
Click to expand...
Click to collapse
Thanks to much I have learned from Master Jocky_W, I am currently working on hacking o a couple of Jockey's new HardSPL's into MFG variations. This will allow for the checking, formatting & fixing of OS flash memory blocks.
I am just about done I think, & then off to Jock it will go for his comments & keen eye.
GSLEON3 said:
Thanks to much I have learned from Master Jocky_W, I am currently working on hacking o a couple of Jockey's new HardSPL's into MFG variations. This will allow for the checking, formatting & fixing of OS flash memory blocks.
I am just about done I think, & then off to Jock it will go for his comments & keen eye.
Click to expand...
Click to collapse
Nice one, I was thinking MFG 3.* HardSPL would be good, but I assumed there was a good reason for them not to exist. Little did I know that's where you were hiding
Great work.
Dave
Good idea with this thread, congratulations.
Just to add something useful for the thread, here is my tip: (for n00bs, or a "newbie-n00bs" since I consider myself a n00b too )
No matter what, DON'T PANIC.
If your phone boots at least partially (the bootloader starts and shows R/G/D versions) maybe its not that bad
I've flashed few times "bad ROMs" and my phone stucked on bootloader. Luckily none of them was that bad that I couldn't recover from it.
What I do first:
disconnect the phone from anything you had it connected to,
and go into bootloader mode (camera button + reset with stylus).
It will show the tricolor+white screen, SPL version on the top and "Serial" at the bottom.
Plug in your USB cable.
If the "Serial" will change into "USB" at the bottom, you are most likely ready to fix the problem
- so flash your phone with new clean ROM now (I would go with clean stock ROM including radio as well)
oh, and don't worry about the ActiveSync info that may be displayed by the RUU app, because you are already in bootloader mode (RUU or KaiserCustomRUU etc, at first disconnects AS in order to set your phone in bootloader mode, thats why the warnings about AS being "green" etc)
HTH
this one isn't covered!
I go right to bootlader and see RUUNBH upper right!
my SPL is 3.56.hard
CPLD-8
I would flash my stock rom BUT i cant get a usb connection to work at all!
mtty doen't work at all!
hmm?!?!?!??
HELP, please!
OrrinS1189 said:
I go right to bootlader and see RUUNBH upper right!
my SPL is 3.56.hard
CPLD-8
I would flash my stock rom BUT i cant get a usb connection to work at all!
mtty doen't work at all!
hmm?!?!?!??
HELP, please!
Click to expand...
Click to collapse
Does "USB" show in the bootloader when you connect the USB plug or not?
Dave
yep
yes, those words DO change. But nothing can be done on my PC.
OrrinS1189 said:
yes, those words DO change. But nothing can be done on my PC.
Click to expand...
Click to collapse
Have you done the following to get MTTY to work?
* Download mtty.exe
* Disable activesync (connection settings -> uncheck "allow usb connections")
* Connect your Kaiser to PC using USB cable.
* Open mtty, select USB port and click OK.
* Hit ENTER twice, you should see the "Cmd>" prompt.
* Type the command "boot".
Are you using Vista or XP?
Dave
yes again!
i have disabled usb connections through active synch and killed ALL the mobile processes through task mngr. Still, usb port cannot be opened through mtty!
it's crazy! =[
also, when i plug in my tilt, i get a beep beep beep from my PC saying failure to cconnect to hardware. =[
VISTA!!!
OrrinS1189 said:
i have disabled usb connections through active synch and killed ALL the mobile processes through task mngr. Still, usb port cannot be opened through mtty!
it's crazy! =[
also, when i plug in my tilt, i get a beep beep beep from my PC saying failure to cconnect to hardware. =[
VISTA!!!
Click to expand...
Click to collapse
I'm leaving work now, but can you trying flashing your carrier ROM from the SD card, that might do it.
Also, try the attached MTTY.
If that don't work, can you find a Windows XP Machince and try the normal MTTY method.
Dave
No Luck
Since I can't establish a usb connection I have no way of getting ANYTHING to my tilt.
I can't access my SD card.
MTTY says command error when I say boot.
I don't think MTTY is connecting.
Does my SPL need to be changed?
If so, how do I change it if I can't get a connection to my tilt at all?
I GOT IT!
i TOOK your advice to flash from my SD my naming a rom KAISIMG.nbh and using my PC to put on card. then i just entered bootlader. I flashed a random new rom (not at&t) and it worked in restoring my phone.
I didn't use a stock rom cause my spl didn't match. thanks for all your help man.
OrrinS1189 said:
i TOOK your advice to flash from my SD my naming a rom KAISIMG.nbh and using my PC to put on card. then i just entered bootlader. I flashed a random new rom (not at&t) and it worked in restoring my phone.
I didn't use a stock rom cause my spl didn't match. thanks for all your help man.
Click to expand...
Click to collapse
Glad you got it working.
Dave
good thread
BTW, if you do not have the RUUNBH on the screen, but can't get OS to boot and you didn't flash my patched SPL's for prevention, I now have a solution for those too in my thread (also sticky, so easy to find).
cmonex said:
good thread
BTW, if you do not have the RUUNBH on the screen, but can't get OS to boot and you didn't flash my patched SPL's for prevention, I now have a solution for those too in my thread (also sticky, so easy to find).
Click to expand...
Click to collapse
Thanks for this.
I have added this to the Wiki Page. Which I may re-write later to be a little more clear.
Dave
I have re-written most of the Wiki Page to be more than a collection of random Links. It took over an hour, to get right, so please read it.
Now there's really no reason to get stuck.
Thanks
Dave
DaveShaw said:
I have re-written most of the Wiki Page to be more than a collection of random Links. It took over an hour, to get right, so please read it.
Now there's really no reason to get stuck.
Thanks
Dave
Click to expand...
Click to collapse
nice update! really useful to all kaiser owners.
btw, you wrote:
"This method will not work if RUUNBH is showing and cannot get the OS to boot even once"
I removed second part if you don't mind, the method doesn't need that as a requirement. (and it will actually unset RUUNBH flag too if the loading of the special SSPL and the flash is successful, but for RUUNBH issue this solution is overkill, because for that "set 16 0" is fine.)
cmonex said:
nice update! really useful to all kaiser owners.
btw, you wrote:
"This method will not work if RUUNBH is showing and cannot get the OS to boot even once"
I removed second part if you don't mind, the method doesn't need that as a requirement. (and it will actually unset RUUNBH flag too if the loading of the special SSPL and the flash is successful, but for RUUNBH issue this solution is overkill, because for that "set 16 0" is fine.)
Click to expand...
Click to collapse
Thanks cmonex, I don't even know what that senence means, I wrote it after midnight last night, and I really can't recall what I was thinking.
Cheers
Dave
First, I’m using the ROM L26KDV12. I used the tweaking program that comes with the ROM and I hit done, the phone said to restart the device to get effective or cancel to restart later but I choose to restart the device. So, the Phone restarted and I stuck in bootloader mode.
I tried to re-flash my ROM L26KDV12 and I got the 100% result in the screen but when I restarted the device it was stuck again in bootloader mode. I tried to update the Radio but got no luck also.
So I decided to update the ROM via MicroSD(Dutty’s Diamond V1.9) and I got 100%(complete result on the screen again) but when I did the last instruction of updating the ROM via MicroSD(to restart the device), my phone goes off and I can’t open anymore..
Please I need help..
Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.
Wow! Sounds like you are in deep doodoo. I had almost an identical problem last night trying to flash ROMeOS 4.7. I went and read the stickies at the top of this forum and was back up running in no time.
loserp3 said:
Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.
Click to expand...
Click to collapse
Sounds like you did not HardSPL. The tri color screen you are seeing is called bootloader. It's not as scary as it might seem at first. When you connect yoru device to your computer does it still show the letters "USB" at the bottom? If so, try flashing the stock rom for your device and see if that will fix your problem. After that be sure to make sure you've properly hardspl'd your device before flashing anything else.
loserp3 said:
... i see this weird red green blue and white screen...
MIke.
Click to expand...
Click to collapse
HOW COME YOU KNOW HOW TO WRITE BUT YOU CAN'T READ?
geez...
I had the same problem once. I remember I solved it that I first flashed it back to the OEM that came with it, and then flashed it again. It worked. Hard SPL and CID unlocker helped being that the phone was locked.
If you dont have OEM OS you can always find one here, just use the Search button.
Secondly, you have to follow the steps exactly as instructed because those are the only way to successful flashing. Are you sure that you didnt overlook one of the steps?
Pay special attentiton to the 2nd Q&A and also other Q&A being that there are all the answers.
Happy flashing mate.
Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.
loserp3 said:
Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.
Click to expand...
Click to collapse
Do NOT flash another rom until you have hard spl'd your device. Make sure you check out the thread at the top of this forum, which you already sited once. You should also consider sim/security unlocking your device as well. You can ONLY use jumpspl to put hardspl on your device. Absolutely do not start flashing roms until you can enter bootloader and next to spl: see "hard spl" somewhere in the title.
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you are so making this too hard on yourself. Follow these directions to the letter and you'll be fine:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
If you have problems with the above process, try this:
1a. download the attached files
1b. pull out the battery and reinsert it (this step *is* important)
1c. connect your PC to phone with a USB cable
2. REMOVE SIM and SD CARDS !!
3. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
4. after a few seconds "USB" appears on the phone display
5. unplug and replug the usb cable
6. deselect "Allow USB connections" in Activesync connection settings
7. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
Notes:
With the JumpSPL you should *not* flash radio roms, OS roms or full roms. The JumpSPL is only needed to flash a HardSPL (or SPL)
the link to the thread in which this came from is here:
http://forum.xda-developers.com/showthread.php?t=396922
Having just redone this this morning to revert back to 3.29, I can confirm that it works.
In the future, please don't start a thread for this type of porblem. We all starte out by reading. I've been a part of this forum for 3 years and learned all I have from just reading and asking questions that could not otherwise be answered.
loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you did not read the instructions correctly. Try reading them again.
It says:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
You are stopping at step 5. Perform steps 6, 7, & 8. After that time you can soft reset the device while holding down the camera button (that will take you to the tri colored bootloader screen) and it will say "hardspl" if you have done it correctly.
If you don't read more closely you WILL break your phone and nobody here will be able to help you. These procedures are easy enough to follow if you take your time and read. I only say this to save you a great deal of frustration when your phone dies later.
Also, remember in the future that all the information you are seeking is readily available if you look for it. Dont' expect someone to GIVE you the answer, and please please please....post your questions in a thread that is already around rather than starting a new one!
@ Scothua
like the way you think . . .
scotchua,
Thank you for your assistance. i've finally upgraded my rom.
thank you all.
i am really stuck here after i upgraded my o2 xda exec to ur rom. it took too much battery and took me ages to charge it. however, this is never the issue. what happened was that my phone went off battery and couldnt make it charge or even connected to the pc.
it actually charges when i plug but without the orange light which indecates that it is charging.
Plus whenever i try to connect it to pc it says uknown device. even when i switch to bootloader mode it still says unknown device. therfore i cant flash a new rom. the battery is new and the device is O2 Xda exec but is also as new.
pls pls anyone, sort me out.
Moe
Mo0oe said:
i am really stuck here after i upgraded my o2 xda exec to ur rom. it took too much battery and took me ages to charge it. however, this is never the issue. what happened was that my phone went off battery and couldnt make it charge or even connected to the pc.
it actually charges when i plug but without the orange light which indecates that it is charging.
Plus whenever i try to connect it to pc it says uknown device. even when i switch to bootloader mode it still says unknown device. therfore i cant flash a new rom. the battery is new and the device is O2 Xda exec but is also as new.
pls pls anyone, sort me out.
Moe
Click to expand...
Click to collapse
Welcome to the forum
I would recommend to follow this instructions on the Wiki: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Charge your battery at 100%
And don´t forget to vote!
Good luck,
I had similar experience with this ROM even after installing everything successful, and good use of ROM for about 7-10 days, not sure why and thought am the only one experienced this. The phone simply went off (i remember using it the previous day night to check mails). No display, it wont indicate wehther it charging, hard reset or softreset does not do anything etc etc
I have put the Uni in Bootloader mode, did a DOC format and flashed the ROM again, it worked and working so far.
Remove SIM and SD Card from Uni and it should recognise the Uni when connected to PC. Its better to use a XP machine as Vista need a separate proces which you can find in this forum by searching.
Please Read wiki and proceed as appropriate to your device condition. The detail on how to do DOC format is in there in wiki
All the best
stilll stuck with my uni!!!
rbalu72 said:
I had similar experience with this ROM even after installing everything successful, and good use of ROM for about 7-10 days, not sure why and thought am the only one experienced this. The phone simply went off (i remember using it the previous day night to check mails). No display, it wont indicate wehther it charging, hard reset or softreset does not do anything etc etc
I have put the Uni in Bootloader mode, did a DOC format and flashed the ROM again, it worked and working so far.
Remove SIM and SD Card from Uni and it should recognise the Uni when connected to PC. Its better to use a XP machine as Vista need a separate proces which you can find in this forum by searching.
Please Read wiki and proceed as appropriate to your device condition. The detail on how to do DOC format is in there in wiki
All the best
Click to expand...
Click to collapse
orb3000 said:
Welcome to the forum
I would recommend to follow this instructions on the Wiki: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Charge your battery at 100%
And don´t forget to vote!
Good luck,
Click to expand...
Click to collapse
thanks to u both lads for replying but unfortunately i am still stuck. i tried all the ways u told me abt and tried wiki. Apparently, so many ppls have the same problem but no clear way for the solution yet. both of my computers cant recognise it!!!
i really need ur help stilll in this and u can help me step by step through msn messenger if this is convenient to any of u guys.
rbalu72 said:
I had similar experience with this ROM even after installing everything successful, and good use of ROM for about 7-10 days, not sure why and thought am the only one experienced this. The phone simply went off (i remember using it the previous day night to check mails). No display, it wont indicate wehther it charging, hard reset or softreset does not do anything etc etc
I have put the Uni in Bootloader mode, did a DOC format and flashed the ROM again, it worked and working so far.
Remove SIM and SD Card from Uni and it should recognise the Uni when connected to PC. Its better to use a XP machine as Vista need a separate proces which you can find in this forum by searching.
Please Read wiki and proceed as appropriate to your device condition. The detail on how to do DOC format is in there in wiki
All the best
Click to expand...
Click to collapse
how do i do the DOC format. i searched everywhere pretty much but couldnt figure out how to do it!!
pls let me know. cheers!!!
Mo0oe said:
how do i do the DOC format. i searched everywhere pretty much but couldnt figure out how to do it!!
pls let me know. cheers!!!
Click to expand...
Click to collapse
hi
1.) first you need to download mtty utility, here is the link http://forum.xda-developers.com/download.php?id=9864
2.) on PC go to activesync and uncheck "allow USB connections"
3.) Then go into bootloader mode (light button+power button and soft reset)
4.) On PC open mtty utility / software.
5.) On PC select USB from the "port" drop-down on the upper left corner of the dialog box and hit OK.
6.) On PC you see a blank white screen. Press enter to get "USB>"
7.) On PC type "set 14 0" and hit enter. You will see some gibberish on the mtty utility which will again be suffixed by "USB>"
8.)the type in "task 28 55aa" (try not to copy/paste this because mtty sometimes doesn't recognise it if it is pasted)
9.) you will se WAIT, so wait until it is finished
10.) unplug the usb cable, and re-plug it into the same port
now you are still in bootloader mode, now flash the new ROM, remove the
usb cable and do a hard reset
I hope i could help
damir-bosna said:
hi
1.) first you need to download mtty utility, here is the link http://forum.xda-developers.com/download.php?id=9864
2.) on PC go to activesync and uncheck "allow USB connections"
3.) Then go into bootloader mode (light button+power button and soft reset)
4.) On PC open mtty utility / software.
5.) On PC select USB from the "port" drop-down on the upper left corner of the dialog box and hit OK.
6.) On PC you see a blank white screen. Press enter to get "USB>"
7.) On PC type "set 14 0" and hit enter. You will see some gibberish on the mtty utility which will again be suffixed by "USB>"
8.)the type in "task 28 55aa" (try not to copy/paste this because mtty sometimes doesn't recognise it if it is pasted)
9.) you will se WAIT, so wait until it is finished
10.) unplug the usb cable, and re-plug it into the same port
now you are still in bootloader mode, now flash the new ROM, remove the
usb cable and do a hard reset
I hope i could help
Click to expand...
Click to collapse
hey,
thanks man. i got my uni back on track now. u r the best. thanks to everybody here. i am loving this forum.
thanks again,
moe
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
I think you have been bricked your device...
dineshkumaar said:
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
Click to expand...
Click to collapse
if it's not recognized, remove the SIM card, the SD card, and on the PC open activesync and disable usb connections. for more info open this link
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
what if the device is bricked
Thanks for your quick reply
Kindly let me know what could be done with the bricked device. Can it be repaired again.
Thanks again
Dinesh Kumaar
dineshkumaar said:
Thanks for your quick reply
Kindly let me know what could be done with the bricked device. Can it be repaired again.
Thanks again
Dinesh Kumaar
Click to expand...
Click to collapse
you have to find another rom and try to flash it to your PDA.
ARE YOU RUNNING windows XP on your PC?
Yes ! I have Windows XP SP2 and Active Sync Version 4.5.0 (Build 5096)
Thanks
dineshkumaar said:
Yes ! I have Windows XP SP2 and Active Sync Version 4.5.0 (Build 5096)
Thanks
Click to expand...
Click to collapse
have you tried to upgrade another ROM, and if you did, is your PDA now working?
I cannot update my rom as my pc cannot recognize my device. is there any other way to update rom?
dineshkumaar said:
I cannot update my rom as my pc cannot recognize my device. is there any other way to update rom?
Click to expand...
Click to collapse
Have you read here?
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Try to reflash with another ROM
Hope it helped
And don´t forget to vote!
I had already done those steps to get no results.
its my badluck.
If you cannot get into bootloader and you have done the steps above, then you cannot flash to another rom.......it would seem you now have a paperweight im afraid
I am still not able to revive my device. I know that it is just due to corrupt bootloader but don't know how to repair it.
If anybody ever has solution for this... kindly let me know.
Regards
Have you tested mtty?
I would recommend to PM a chef on Universal forum
Good luck,
Mtty is not detecting my device
it says can't open usb port
One More thing I have noted is that when I keep the device connected with the pc, at a certain interval of about 10-15 mintues my device's Led shows RED Light for few seconds and then turns off followed by the the "USB device not recognized" on my pc.
I hope this can be used as a hint towards reviving my device.
Regards
have you followed orbs advise above and pm a chef on that section, they maybe able to help. From my knowledge (limited on that device) i ddont think there is any recovery proceedure that you have not tried. Have u downloaded offical wm5 rom and tried it. I know and appreciate that it will probably not work due to corrupt bootloader, but what else is there to do??
To understand more, what did you do PRIOR to trying to flash to 6.5.
Did you hardspl correctly? Had you already flashed to another rom and just felt like flashing to another new rom?? Give us more detail.
Thanks for your reply
I dont know how to PM Chef.
I had used 3 other Rom versions of WM6.1 on my device. They ran very much fine on my device. But When i found WM6.5 xplode, I wished to try that too. But the rom update procedure went successfully till 99% and after that it showed an error that upgrade was not successfull. I pulled out the device and tried to restart if by all methods but I wasnt able to power on at all.
Thanks
Regards
ok, goto the thread that you got the rom off, click the chefs name and you will get a menu there to send pm, do it, he might have seen a similar problem or know how to correct bootloader.
good luck
noup really no...
Is bricked
my bro has bricked an Universal and the same led turns red no power off no bootloar no power it means the flash chip is dead!
Sorry to heard that.
He waits too long for the upgrade it tooks at least 40 minutes
then ERROR... but you know... the batt was died in middle process ( th batt was ****ed up, it say full charged but no! it was on 60 or 50%) then the stupid thing is make a hardreset.. i told him dont hR your device... justa simple reste and reinit the process... and huh! its bricked.
if you are interested on sell your parts
maybe my bro want some parts.
my advice(similar to other people):
1. Charge your batery somehow (in other device or anything else)
2. put your devce in bootloader mode and connect it to pc - it wll be detected like microsoft usb sync
3. use mtty try difrend versions becuse sometimes 1.42 does not detect it properly - read here for what to do with mtty
IMO this may be battery problem or nand chip problem - in both cases it is hardware fail
Hi ! I have a problem with my Kaiser ! The screen is black, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays black ! Is there a way to make my kaiser working ? (Sorry for my english)
Remove battery and then press power button 30 seconds or more.
Worked for me.
Assface said:
Remove battery and then press power button 30 seconds or more.
Worked for me.
Click to expand...
Click to collapse
it doesnt work ! I think there is a problem with spl , because this problem appears after unsuccessful hard spl installing ! I don know how to fix this
IP13 said:
Hi ! I have a problem with my Kaiser ! The screen is blank, the device doesn't turn on ! But when i hold the power key & soft reset hole at the same time,
green light comes on, but the screen stays blank ! Is there a way to make my kaiser working ? (Sorry for my english)
Click to expand...
Click to collapse
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
krouth said:
Not trying to oversimplify things, but is the device fully charged? Did you have any problems during the flash? Which SPL did you flash? Have you tried a hard reset? Can you get to the bootloader screen to verify the version of SPL installed vs. the version you tried to install?
Just a few questions to help us try to figure out what is going on. Take care!
Click to expand...
Click to collapse
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
IP13 said:
The device is fully charged ! The problem was when I tried to install hard spl ...the screen stuck and I made a reset ,after this the phone ca not be turned on and all I see is green light.
I can not get to bootloader screen , when i try to turn on the device the screen i black (blank) but the green light is on
Click to expand...
Click to collapse
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
krouth said:
How are you trying to get to the bootloader screen? Have you fully read through this thread:
http://forum.xda-developers.com/showthread.php?t=533976
Finally, I would recommend downloading the original ROM and installing it. The ROM for the Tilt is here:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
That is straight from HTC's website, and you might look to see if your specific phone is there. You should be able to download it, connect your phone with the USB cable and run the downloaded file from your computer to bring your phone back to it's original state.
If that works, I would then re-read the link above thoroughly and give it another shot. Hope this helps!
Click to expand...
Click to collapse
Active sync doesnt recognize my Kaiser!
IP13 said:
Active sync doesnt recognize my Kaiser!
Click to expand...
Click to collapse
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
krouth said:
When you try to run the original HTC ROM installation program (from my previous post) with your phone connected - does it recognize your Kaiser?
Click to expand...
Click to collapse
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
IP13 said:
no,it doesnt recongnize my kaiser ! when I connect my kaiser via USB Windows says that i have conected a "ZTE USB Modem 6000 CDMA 1x"
Click to expand...
Click to collapse
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
krouth said:
I am not asking what Windows thinks you have connected, or whether or not ActiveSync sees the device. What I am asking is: When you run the original HTC ROM installation program:
"RUU_Kaiser_CINGULAR_WWE_3.57.502.2_radio_sign_25.88.40.05_1.65.21.18_Ship.exe"
downloaded from HTC's website, is that program able to see your phone and go through the installation process?
Click to expand...
Click to collapse
I cant install this rom because it shows me an error : "ERROR [260] CONNECTION
The Update Utillity cannot connect your PDA Phone . Please check that your USB cradle/cable is connected properly between the PC and your PDA phone .
Chech the following :
1.The PDA Phone is connected to the USB cradle/cable.
2.The USB cradle/cable is connected to the PC "
I have allready checked the cable (it works with my other PDA)
delower10 said:
Uninstall Ur Active synce And Install Again .
Then Put Ur Phone In Bootloader Mode I Hope Work Fine
CHK And Post Result
Click to expand...
Click to collapse
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
IP13 said:
I cannot acces bootloader mode , when I am pressing keys to acces bootloader mode the phone screen is still black /blank .
Click to expand...
Click to collapse
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
krouth said:
To access bootloader, you should hold down the camera button (on right side of phone) and the use the stylus to press the reset button (on bottom of phone.) When the phone goes blank, release the camera button.
When you do this, do you still get the blank/black screen?
Also, did you follow EACH step in the following thread:
http://forum.xda-developers.com/showthread.php?t=433835
Click to expand...
Click to collapse
Yes ! I also get the blank screen after following all this steps !
IP13 said:
Yes ! I also get the blank screen after following all this steps !
Click to expand...
Click to collapse
I am not sure.... I have done some searching and ran across this thread:
http://forum.xda-developers.com/showthread.php?t=423486
It has numerous posts about problems people have experienced flashing - maybe you might get some insight there - or at least post your question there where more people might be monitoring the thread. Good luck!
Please take your issue to the right place, better than open a new thread, I sugest
http://forum.xda-developers.com/showthread.php?t=433835
Your situation should be taken by the right guys, not just gessing if this or that might solve the situation, male a post there
Also have a look at the sticky on the top, try to get Dave Shaw help
THx I will try to ask there ....
Fanning the flames.
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
tyler51773 said:
Okay if you can't access the boot loader then you need to go higher up. I think the chain is Radio Rom, then SPL, then OS. Basically your SPL is gone, that is why your screen is black and you can't get into the boot loader --- cause its gone. So no duh, it can't load the OS. So, your only hope is that your radio rom is working so you can access the phone via cmd interface programmed within it.I really don't know what i'm talking about, but I've bricked my phone too and with some guidance (er explicit instructions in chat) I was (er she was) able to fix it [my situation was far more complicated with a "security locked" device, and a "radio from hell"]. Your key words are frankenkaiser. which you can find here:
http://forum.xda-developers.com/showthread.php?t=394584
Good luck, if you can get into the oemsbl I'm sure your in business. If your feeling nervous bust out the paypal and head to irc.freenode.org #xda-devs {albeit someone will likely help you without the donation but for real your going to hold someone up for an hour or two you should throw them atleast 20$ to save u 200$ }
Click to expand...
Click to collapse
Thx man , appreciate this !!