i have palm treo 750 and i have done upgrade from wm6(unloaked)to wm6(att)!!! my brother has the same phone with me, can i take his files to my treo?? you know folder windows!!I tried to do that and when i tried to copy it said access dinied!!! The ram is special is for greek's with extras!!!
sorry for my bad english!!!
if you dont understant what i'm saying just sent a pm to me!!
thanks for your help bouzouste
be careful copying to windows folder.
But I think that data files like fonts etc. there is no problem .
Use resco Explorer for this mission.
libal said:
But I think that data files like fonts etc. there is no problem .
Use resco Explorer for this mission.
Click to expand...
Click to collapse
thank you very much!! if i have any problem i'll pm to you!!!
thanks again!!
Related
hi there,
As you will guess by my question and post count i am a fully fledged n00b and have just bought the o2 xda orbit.
It such a great forum and enjoying reading all these mod's however there is one slight problem...
...how do you add them all?! i can obviously download all the files etc to my desktop (PC) but how do i then get them to install and work on my xda? e.g. quickgps mod, emulators, themes etc?
i imagine its very easy to answer and thanks in advance
just sync ur pda to pc,some progs will require a simple click ,if this needs you to do more on the device it will prompt you
other will need transfering onto your memory card and activating from your pda
i used this method with trail and error
good luck buddy
yeah ive tried syncing it and it does connect but then unsure of where to put the files.
For example i have the file to update the quickgps to locate quicker. Its in a .arm file and inside that is one file which is quick~g.000. I dont know whether to put the .arm or .000 onto the xda and when i have found that out in which folder do it put it when on explore of the XDA through activesync?
Thanks for the reply.
massive help and all understood now. tried both cab and exe files and both work great, thanks alot
Chris
Hi ppl, sometimes i download a program and i get a bunch of files with an "XML setup" file included, how do install this? Thanks.
Indy
Indym,
Please could you be a bit more unspecific.
Thanks
HPJ
From what i think , you are opening cab files(with winRAR) which have to be directly copied to the WM device you are using rather than being extracted .
So if u have say prog.cab , dont open it with RAR
>just copy to device and run from there
Hope this helps
udayrulz said:
From what i think , you are opening cab files(with winRAR) which have to be directly copied to the WM device you are using rather than being extracted .
So if u have say prog.cab , dont open it with RAR
>just copy to device and run from there
Hope this helps
Click to expand...
Click to collapse
Thats it thanks! Yep i've been unzipping it on my pc. Appreciate your help.
Indy
No Problem
Enjoy!
hi guys ive searched the forum with no result so here goes
ive download
Windows Live 10.6.0034.0800 (Fixed)
for my vario 3 but when i extract it comes up 57 files
how do i install these on my device????
any help would be great
thanks in advance
http://pocketpccentral.net/help/tutorials/install_cab_file.htm
or just use google ?!
It's done in 5 seconds....
petervbeck said:
http://pocketpccentral.net/help/tutorials/install_cab_file.htm
or just use google ?!
It's done in 5 seconds....
Click to expand...
Click to collapse
what file do i click to install out of the ones that are extracted coz theirs like 50 odd of them?
cheers for the quick reply buddy
you don't have to extract the cab file, just copy the cab to your device
and start file explorer - click it and the setup will start...
cabs are similar to setup.exe's on desktop computers, just for ppc
You DO NOT unpack a cab file! NO! NO! you just transfer the whole cab file to your phone by transferring it to a card or by synchronizing it using activesync! Whatever you do, don't unpack file. It will install itself once it is transferred to phone.
(sorry, was not quick enough to answer...he's beaten me to it! )
petervbeck said:
you don't have to extract the cab file, just copy the cab to your device
and start file explorer - click it and the setup will start...
cabs are similar to setup.exe's on desktop computers, just for ppc
Click to expand...
Click to collapse
perfect buddy got it working lol
im a complete noob at this so thanks for the help its much appreciated
Use enclosed software which is great thanks to modaco.com
after installation, in the file manager right click on the cab file that you wan to install then you will see the menue CABviaActiveSync (device must be connected)
I know that I've seen a post (either on this forum or the Diamond one) for removing the envelope in the email preview screen in TF3D. But I saw the post before I got my Fuze and now I really want to get rid of that envelope and can't find the post!
Does anyone else know where this info is or how to do it? I swear I have tried searching but I haven't been able to find it.
Try to un-enable TF3D first, then delete "hh_email_envelope_down.png" and "hh_email_envelope_up.png"
Nghiem said:
Try to un-enable TF3D first, then delete "hh_email_envelope_down.png" and "hh_email_envelope_up.png"
Click to expand...
Click to collapse
Thanks for the advice but I can't find those files on my device. Any idea where they are?
ITNV said:
Thanks for the advice but I can't find those files on my device. Any idea where they are?
Click to expand...
Click to collapse
I would check the windows directory... dont quote me on it, but thats the first place i would check
And of course you will need some enhanced windows explorer like total commander or resco explorer to view hidden/system files and to modify rom-files.
file explorer shows all files just click menu 3rd from the top, Show All Files.
i dont think that will work - to my knowledge the built in file explorer won't let you touch files in ROM
Also if you delete these files wont they come back when you restart the device?
Kris
i00 said:
i dont think that will work - to my knowledge the built in file explorer won't let you touch files in ROM
Also if you delete these files wont they come back when you restart the device?
Kris
Click to expand...
Click to collapse
Kris, AFAIK you're right twice. But it could be possible replacing the original files with empty ones using Total Commander or some other advanced file explorer. Would be interesting what happens then (but not interesting enough for me to try it myself though )
DeepThought said:
Kris, AFAIK you're right twice. But it could be possible replacing the original files with empty ones using Total Commander or some other advanced file explorer. Would be interesting what happens then (but not interesting enough for me to try it myself though )
Click to expand...
Click to collapse
ahh i didint know that if you delete something with file explorer it comes back... learn something new everyday
B18DelSolT said:
ahh i didint know that if you delete something with file explorer it comes back... learn something new everyday
Click to expand...
Click to collapse
Not everything of course but files which are stored in the ROM do. They can not be changed, deleted or what so ever but with an enhanced file explorer like total commander or resco explorer you can sort of "replace" those files with a modified version. But again. The original isn't really replaced. Your version will be stored in the RAM and "overrules" the file in the ROM. But if you later on decide to revert back to the original file you just have to delete your modified RAM-file and after a soft-reset the ROM file will be back/visible again.
yea in ROM i meant ...
and instead of replacing the files with an "empty file", it would prob be safer to replace them with a 1x1 totaly transparent png
Thanks for the help and advice but I can't find those files even with resco and total commander. Guess I'll keep searching for that original thread...
http://forum.xda-developers.com/showthread.php?t=436895
But just for m2d. If you figur it out how to hach the m3d version please let as know.
mat_pav said:
http://forum.xda-developers.com/showthread.php?t=436895
But just for m2d. If you figur it out how to hach the m3d version please let as know.
Click to expand...
Click to collapse
That must have been the post I saw. No wonder I couldn't find it again, I was looking for TF3D. Thanks!
http://forum.xda-developers.com/showthread.php?t=436895
For m2d.
Let us know if make any progres with m3d.
Hi there!
I was tinkering about on the system files of my Galaxy Beam, and (maybe) accidentally messed up with the partition of the device.
The device runs on Jelly Bean 4.1.2 and now its mobile data service is disabled, and when I checked the baseband it says "XXXX" (I believe this is the same case as baseband unknown).
I tried to repair it using Szaby59's method (http://forum.xda-developers.com/showthread.php?t=2145464), but to no avail.
I wonder if there is another way to restore the baseband of my phone? I understand I might have messed with the efs and modemfs files, will it help if there is anyone who is kind enough to share his/her stock efs/modemfs files, and I get to use those files to my phone?
Hope the information was clear enough, thanks in advance.
ardjet said:
Hi there!
I was tinkering about on the system files of my Galaxy Beam, and (maybe) accidentally messed up with the partition of the device.
The device runs on Jelly Bean 4.1.2 and now its mobile data service is disabled, and when I checked the baseband it says "XXXX" (I believe this is the same case as baseband unknown).
I tried to repair it using Szaby59's method (http://forum.xda-developers.com/showthread.php?t=2145464), but to no avail.
I wonder if there is another way to restore the baseband of my phone? I understand I might have messed with the efs and modemfs files, will it help if there is anyone who is kind enough to share his/her stock efs/modemfs files, and I get to use those files to my phone?
Hope the information was clear enough, thanks in advance.
Click to expand...
Click to collapse
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
thanks a lot man! will try to replace the modemfs file in my phone with the ones you just gave, hopefully this'll work!
IT WORKEDD!!!
I replaced the modemfs folder in the root directory, with the ones given by alameralshamry, rebooted my phone, and voila! data plan is back!
thanks a million to alameralshamry...and hope this thread may help anyone with similar problem.
ardjet said:
IT WORKEDD!!!
I replaced the modemfs folder in the root directory, with the ones given by alameralshamry, rebooted my phone, and voila! data plan is back!
thanks a million to alameralshamry...and hope this thread may help anyone with similar problem.
Click to expand...
Click to collapse
im happy to know that its worked with you ... you are welcome
i8530
ardjet said:
IT WORKEDD!!!
I replaced the modemfs folder in the root directory, with the ones given by alameralshamry, rebooted my phone, and voila! data plan is back!
thanks a million to alameralshamry...and hope this thread may help anyone with similar problem.
Click to expand...
Click to collapse
how replaced modemfs folder
i m unable to download your files..
please help me... thanks in advance.
alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
agan can ask EFS has a backup folder that agan ga bin or img shape.
alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
I just registered and replied this post with many thanks! Because I also had headache with my i8530 phone which lost the baseband info.
Your file of "modemefs.zip" REALLY worked on my I8530 phone! I unzipped the files and copied into the root directory of "modemefs", then reboot, finally the baseband came back!!!:good:
I almost decided to throw away this cell phone before I found this post. You have greatly helped me to solve my problem.
Many thanks again!
alameralshamry said:
hi ardjit the tow folders that u asked for they are zipped and attached above :good:
Click to expand...
Click to collapse
how to replace the modem file in root directory plz tell
imran qasim said:
how to replace the modem file in root directory plz tell
Click to expand...
Click to collapse
First make sure your phone is rooted and Root Explorer is installed.
Open Root Explorer, copy the files to /modemfs directory.
If failed to copy, one reason may be that /modelfs directory has insufficient space. Because Android system allocates different space for some specific system directories.
When you turn to /modemfs, Root Explorer will show "XX MB used, XX MB free" on the top.
If the free space is very little, you will NOT be able to replace the model file, so you need to consider to delete some useless or irrelevant files inside this directory.