I'm having an unusual graphics performance problem. This is different from all other complaints, as far as I can tell. Most raph graphics complaints center around consistent slower than expected performance. My problem is that non-3D graphics performance seems to decrease over time. Let me explain...
After my device has been on a while (sometimes a few hours, sometimes a few days), I will notice that when I click the start button to launch an app (yes I use the built-in start button lol), I can noticibly see the entries draw. If I go into an app that has heavy use of form controls (checkboxes, listboxes, textboxes, etc... all the built-in windows stuff), you can watch it draw all the elements on the screen. Scrolling just makes it worse.
However, 3D accelerated apps are just fine. For example, Manila draws as fast as ever. Even Opera draws fast.
CPU is not bogged down. Apps load quick, they just draw slow. If I open DotFred's task manager, I can confirm that the CPU is nearly idle and no application is bogging it down.
This problem seems to only affect GDI or win forms elements.
Does anybody have any clue what might cause this? Since I don't see anybody else complaining about this, I figure it must be something I did or installed, or something like that.
I'm using the Sprint stock ROM.
EDIT: Even if you don't know what's wrong, if you have any diagnostic suggestions, I would be grateful. I've tried terminating every running app and service that isn't system critical. I've tried different graphics tweaks suggested for WinMo. No luck. :-( Soft reset is all that fixes it. I may try a hard reset, but I'm just so satisified with the way my system is set up, I don't want to. Plus, "reformatting" is such a unsatisfying conclusion to a problem. I like to know why. LOL.
EDIT 2: I have reason to suspect it may be RSSHub's scheduled task to refresh feeds that may be the cause. I just disabled it. Will report later if this fixes it. I had almost 20 hours of no slow down and then as soon as i noticed it happening (painfully slow start menu redrawing), i saw RSS Hub had JUST started downloading a podcast. Let's see if this is the cause. *crossing fingers* I'm not 100% sure because I've killed RSSHub.exe before and the speed was still slow. So whatever causes the slowness doesn't stop until a soft reset, even if the process is killed (i'm guessing).
EDIT 3: It must have been coincidence because RSSHub hasn't run in over 24 hours, but I woke up this AM with a slow phone. Still investigating...
I know you said you'd rather not hard-reset, but still I suggest you to try a different rom (not a stock one). I use energyrom 2.0 on my raphael 100, which is unbranded. The rom is sort of 'made for' the fuze, but works fine on my tp. The only thing you have to figure out before you flash is how to fix the hadware keyboard, which is by default set to the fuze. I recall it's a simple registry change, but can't remember which one.
Good luck
Scalage said:
I know you said you'd rather not hard-reset, but still I suggest you to try a different rom (not a stock one). I use energyrom 2.0 on my raphael 100, which is unbranded. The rom is sort of 'made for' the fuze, but works fine on my tp. The only thing you have to figure out before you flash is how to fix the hadware keyboard, which is by default set to the fuze. I recall it's a simple registry change, but can't remember which one.
Good luck
Click to expand...
Click to collapse
I prefer to use the stock rom. First, I really like Sprint Navigation and Sprint TV. Second, Sprint support immediately stops talking to you if you use a custom ROM (and I've had to exchange my TP three times for different unrelated reasons -- bad luck I guess or poor HTC manufacturing standards). Third, hard resetting is just not as satisfying as actually solving the problem. I'm just weird that way.
EDIT: After "EDIT 3" (above), I'm closer to hard resetting, but I'll likely stick to the stock ROM for the afforementioned reasons... Unless after hard resetting it starts happening again, that is.
Scalage said:
I know you said you'd rather not hard-reset, but still I suggest you to try a different rom (not a stock one). I use energyrom 2.0 on my raphael 100, which is unbranded. The rom is sort of 'made for' the fuze, but works fine on my tp. The only thing you have to figure out before you flash is how to fix the hadware keyboard, which is by default set to the fuze. I recall it's a simple registry change, but can't remember which one.
Good luck
Click to expand...
Click to collapse
u can change the keyboard on keyboard selector under utilities... its on the first post of NRG .
Related
Greetings!
As mentioined in the first post of this thread: http://forum.xda-developers.com/showthread.php?t=418150&highlight=issue+list I have encountered similar problems.
I own my TP for 3 days (2 nights) and on both mornings after being charged over the night the TP was absolutely unresponsive and only to be awakened by a soft reset. It couldn't receive calls, and the alarm of course didn't work also (so I missed one this morning - but wasn't late at work) Anyway, this is a serious issue to me, since it makes the phone absolutely unreliable. And I am not in favor of doing regular hard resets by the way ...
Help on this would be really appreciated.
Greetings, hugo
Mine does this everyday, but have you tried pressing one of the buttons like the home button, I know nothing happens for a minute but then it comes back to life with out the need for a soft reset
Haven't tried ...
Well, I haven't tried pressing a button and waiting, but this is not exactly the behavior, to expect from a phone of this kind. You see this wouldn't solve the Problem of not being reachable by phone and missing appointments. In fact I don't know, that how long I was unreachable on phone and in my profession this isn't just disturbing but unacceptable.
Hugo
I've had the same problem, not every time it's charged, but enough times to be a problem. I've switched off TF3D (Start, Settings, Today, Items, untick TouchFLO 3D, tick some standard items).
The problem has gone. Of course, so has TouchFLO.
Cheers,
Graham.
graham.hughes said:
The problem has gone. Of course, so has TouchFLO.
Click to expand...
Click to collapse
This could be of course a last resort, but TouchFlo is quite nice to use (although I cannot get TF to use PocketInformant as calendar app, although it is defined as standard - the original MS calendar app must be hardcoded somwhere ...). And of course as TF is one of the main features of this phone a great amount of it's costs are caused by that software. So if I couldn't use it, the phone would loose a lot of it's value.
Isn't there a sort of event log in wm6.1 to see, which event crashes the system?
Hugo
I get a similar problem in that I lose all sound overnight, so I too miss my alarms. I also get no sound through the earpiece so, although it vibrates when it is supposed to be ringing, I cannot speak on the phone as I cannot hear the other person, and it seems they cannot hear me either, so it obviously affects the microphone as well. I have done a hard reset but it still happens, so it's definitely a bug with TF3D. I know this because if I try to play one of my music tracks using the music tab in TF3D, it plays for about 5-6 seconds (obviously with no sound) and then it crashes TF3D and restarts itself, which sorts the sound issue out. No need for a soft reset here but it's still unacceptable as my alarms are useless, and for £500+ I don't expect such a stupid flaw in the software. Hopefully, a ROM upgrade will sort this out, but when that will be is anyone's guess at the moment.
matmaneyre said:
...so it's definitely a bug with TF3D.
Click to expand...
Click to collapse
That's also my conclusion.
matmaneyre said:
Hopefully, a ROM upgrade will sort this out
Click to expand...
Click to collapse
I think that's what we have to wait for. Until then, it's a choice between bland-but-working or cute-but-unreliable.
have you tried any of these little mem resident babys to get your ram back and kill bad things while it sleeps
http://forum.xda-developers.com/showthread.php?p=2136914
Hmm...I'm just wondering why not more people are reporting this? Anyone NOT experiencing this problem?
Not till now I didn't
Using Stock ROM
I am more and more convicee, that TF3D is quite a buggy piece of software (Aussen hui - innen pfui!). Additionaly to the described above, I got a "broken glass" effect yesterday.
I sure do hope, that HTC releases a ROM update soon, although up until now the Touch Pro isn't even listed on HTC's german support pages.
Maybe I'll give SPB mobile shell a try ...
Hugo
Having same problem, not all the time though.
koppee1 said:
Hmm...I'm just wondering why not more people are reporting this? Anyone NOT experiencing this problem?
Click to expand...
Click to collapse
I have the same problem...
A few times already... even this morning.
TP is totally unresponsive and had to soft reset it to get it back alive.
ROM 1.90.401.1 WWE
Radio 1.02.25.19
Protocol 52.33.25.17U
I've had the HTC Touch Pro for about three weeks now, and since then it's crashed or become unusable at least once a day. I do not believe for one second that these issues are restricted to my handset, and comments on this forum back that up.
Problems I've experienced:
1. TouchFlo 3D screen corruption - "broken glass effect". The TouchFlo interface appears fragmented and split - it continues to function, but is unwatchable. The OS and other applications are unaffected. Cause unknown. Cured by soft reset.
2. Complete screen corruption + freeze. The entire screen gets a still image that looks like 'white noise' - random black and white pixels. The device is completely locked. Cause unknown. Cured by soft reset.
3. Device fails to wake up. Screen has been powered down, either having been switched off manually, or by timeout. Device later fails to respond to Power button. Happens occasionally without warning, and frequently (almost 100%) during overnight charge. Note - leaving the Touch Flo interface on 'Programs' tab (i.e. not 'Home') during charge seems to alleviate this (I don't yet have enough evidence to back up this claim).
I like this phone and its touch interface, but am pretty disgusted by the reliability issues, which I would guess are largely connected to the TouchFlo 3D code and/or hardware drivers. HTC really need to sort this out.
I've had the alarm fail on two mornings so far, needed soft reset.
I'm going to try disabling touchflo I think. Be nice to have pocketbreeze running again anyway.
Just out of curiousity
Do you have your phone set to turn off the screen even if it is charging? I don't have the Pro... yet, but with my 6700 I used to have to ensure the screen stayed on over night if I wanted to have a chance at the phone actually being responsive in the morning so the alarm would go off. Otherwise it would be as your Pro's seem to be doing. Will not turn on or anything until a soft reset. (It is not a fix by any means, I am just curious if it is still the same patern.)
I never charge over night simply to avoid it being charged for 8 hours straight. I keep a charge kit at work, and charge during the day as needed. In less than an hour, I get full battery. Then, I sit it next to my bed at night with no failed alarms.
Maybe it doesn't like the long charges.
I'm trying DCS's ROM now to see if it makes any difference at all. I'll report back in a couple of days. Maybe if I didn't have to charge it so often it wouldn't be so bad!
Wether screen is on or not, it doesn't make a difference. (Why should it on a working phone?)
I sincerely hope, that if those strange behaviours are gone in non stock cooked roms, that there will be some in German language as well ...
I am looking forward to another night!
By the way, SPB Mobile Shell didn't quite meet my expectations. (eg. it has also the sucking MS calender hard coded)
Experienced the "non-responsive in the morning" problem 2 times in 3 days, without the phone being charged. Both times I had the white noise effect on the screen.
Turned off TF3D (I like the phone more without it, actually) and the problem didn't occur in the last 5 days since I did this. It's most likely a TF3D related issue and it will prolly be fixed by the next update.
-KickFlo
I've been having a problem since shortly after I got my Fuze, that sometimes on reset it doesn't want to finish starting up -- maybe on one out of three resets. It seems to hang just before starting TF3D. It's still semi-responsive ... the backlight brightness turns back up if I hit a button, and an on-screen button may react if I press it (though it doesn't get as far as launching the application or bringing up the start menu)
Usually forcing another soft reset via the pinhole button results in it booting just fine.
I'm currently using ROMeOS, but I've run into this problem with multiple ROMs, including the stock one. I don't think it's a hardware issue ... I haven't had any other problems that suggest the unit itself is bad.
I tried to figure out what I've done each time I've customized my setup. I stayed away from registry tweaks that affect things like caches or hardware performance this time, and still got the issue. I tried uninstalling some of the apps that I always use. No dice.
But I think I've narrowed down the issue. I uninstalled mun background4allpages, which puts the wallpaper you select onto every tab. After several resets, no problem. I'll continue to test throughout the day, resetting sporadically. But I haven't seen anyone else report a problem like this with background4allpages ... so I'm not sure this is it.
Anyone have anything like this, with any cause at all?
I have his problem every once in awhile with ROMeOS too. I'm not sure what causes it but I'll have to do three or four restarts before it continues on. I think it usually happens after I install an app that has a Today plugin with it. But I'm not totally sure about that but I do know if is after I install a cab.
Looks like a today screen hangup. I can fix it by going to the Today Items tab in settings->today then choosing ok (which causes today to refresh plugins).
imtribble -- I've never needed to do 3-4 resets to clear it. I'm not sure I've even needed to do 2. But I know in my case, it's happened without any cab installed since the last boot.
Sleuth255 -- I'd actually tried that (though not for that purpose) but it doesn't seem to have helped, at least not permanently.
With background4alltabs uninstalled, it seems like the problem is gone (at least so far). I wonder if it might actually be the collision of using both background4alltabs and manilla customizer to change my clock -- since I read somewhere that the files background4alltabs changes also affect the clock. If I can confirm after several more resets that this was the problem, I'll post something in that thread.
I'm just so confused that it only happens sometimes, not all the time. Odd.
Actually, Sleuth255, that may have helped after all. I reinstalled background5allpages, and the problem reappeared. But then I did the Today "OK" and haven't been able to make it freeze since ... so maybe. Will report back further after more testing.
It is not just on ROMeOS though, with my fuze the same thing happens and I am running elite ROM RC2. It is some kind of today screen hangup and sleuth's solution did not help me. It takes ~2-3 soft resets to get it working correctly. If I hold the power button to reset rather than pressing the stylus reset it boots up with no hangs though. Interesting.
mdow09 -- are you using background4allpapers? how about manila customizer (and if so, what have you used it to change)? anything loading in your startup group? trying to figure out what the common elements among people having this problem might be.
its happened to me on provens rom and when i had romeos
but a second reset always fixes it
Not using background4allpapers or manila customizer, the clsoest thing I am using to that is TF3D config. My senses tell me it is something to do with my secondtoday screen. My startups are as follows:
Answer key disabler
autoshortcut.ink
cleartemp.ink
filedlgchgs.ink
G-alarm reload
HTC startup
PKG.ink
poutlook.ink
startclean.ink
hmmm.... I've not gotten a permanent fix either, I occasionally hang up after a reset. When I have my issue, the start menu is operational and I can load programs etc w/o issues. It's only the today screen that's hung which is why I tried fixing it by refreshing the items list in today settings. I'm not running touchflo either if that makes a diff.
mdow09 -- It looks like the only things in common we're running are the processes that are always there. Nothing from an installed app.
Sleuth -- How long does the today/ok seem to fix it for? Do you do something in between that could be re-triggering the problem? I've done 6-7 resets since I reinstalled background4allpapes. I got a freeze on the first. I tried the today/ok and it hasn't frozen since. Been running various apps and doing various tasks in between the resets.
I -MAY- have solved this, or at least worked around it.
Previously, I tried uninstalling Background4allpages. That seemed to solve it, but I only had it uninstalled for a day or so. No conclusive word on whether it was involved.
I tried Sleuth's Today/OK trick. That seemed to stave it off for a while. Still came back. Possibly after installing new apps or doing other things that affect the Today setup. Not sure.
But here's my most recent attempt -- I moved TouchFlo3d (almost) all the way to the top in the list of Today items, with everything else (as normal) unchecked. You can't go all the way to the top, because the date entry is there. My working theory (based on nothing concrete yet) is that the plugins are loaded in the order in which they appear in that list, and the Today function isn't getting to load one that's problematic. Perhaps it's a similar issue - when the problem appears, Touchflo itself won't load because of another plugin that loads first, but each would be fine independently. In any case, pushing it to the top priority seems to be preventing the problem -- at least for now.
Obvious holes in my theory -- It seems strange that Today would still load unchecked plug-ins at all, though maybe it still does some sort of cursory scan of them. And wouldn't the problematic plugin still then load AFTER touchflo in my new setup? Maybe it is, but it's only causing a problem if it loads before TF3D?
As before, will report back after more observation ...
Wordsmith9091 said:
Sleuth -- How long does the today/ok seem to fix it for? Do you do something in between that could be re-triggering the problem? I've done 6-7 resets since I reinstalled background4allpapes. I got a freeze on the first. I tried the today/ok and it hasn't frozen since. Been running various apps and doing various tasks in between the resets.
Click to expand...
Click to collapse
Its intermittent for sure. I've not been able to peg down what causes it yet.
Are others experiencing this or is it time for the dreaded hard reset and rebuilding? I have an ATT Fuze with a stock from and the black TF3D theme... various pokes and prods to the registry.
check the task manager's list of processes
mine slowed down after taking some video clips and watching them on tf3d
turns out, manila was using from 20 to 40% of cpu!
g2tl said:
check the task manager's list of processes
mine slowed down after taking some video clips and watching them on tf3d
turns out, manila was using from 20 to 40% of cpu!
Click to expand...
Click to collapse
The list shows as empty, i.e. nothing running.
I too have experienced this from time to time. Using a combination of a more advanced task manager (dotFred or memmaid) along with MemMaids reclaim ram feature it is usually rectified. Sometimes simply restarting tf3d fixes it. (either ending task or turning it off in today settings)
To be honest though, this only seems to happen maybe once per day/ once every two days and can quickly be fized by a soft reset.
You can also try scaling back your file system and filter cache. (leave font) I have both mine set to 4mb and havent experienced a slowdown with this rom and settings yet. I used to have max cache on everything (elite rc2) yet I dont seem to need it.
It may have no effect and can possibly be attributed to my old rom setup getting overloaded. I'll post reports of any more slow downs.
RRE beta 3v2 on m1 radio.
-On the road from my Fuze-
-VGA is fantastic-
Scrtcwlvl said:
I too have experienced this from time to time. Using a combination of a more advanced task manager (dotFred or memmaid) along with MemMaids reclaim ram feature it is usually rectified. Sometimes simply restarting tf3d fixes it. (either ending task or turning it off in today settings)
To be honest though, this only seems to happen maybe once per day/ once every two days and can quickly be fized by a soft reset.
You can also try scaling back your file system and filter cache. (leave font) I have both mine set to 4mb and havent experienced a slowdown with this rom and settings yet. I used to have max cache on everything (elite rc2) yet I dont seem to need it.
It may have no effect and can possibly be attributed to my old rom setup getting overloaded. I'll post reports of any more slow downs.
RRE beta 3v2 on m1 radio.
-On the road from my Fuze-
-VGA is fantastic-
Click to expand...
Click to collapse
Thanks. I have the caches (glyph, filter, etc.) all pumped up in an effort to speed things up. Maybe I'm going the wrong way. I was demonstrating the Fuze to some co-workers at breakfast this morning and ran into a 20 second freeze. Same.
Does anyone know what the "Exclusive program list" is? I have googled it, but not found an answer. Jbed.exe appears on that list.
hopper13 said:
Does anyone know what the "Exclusive program list" is?
Click to expand...
Click to collapse
This is the part of the operating system that allows you to always keep a certain set of applications running even when you instruct windows to stop all programs.
behrouz said:
This is the part of the operating system that allows you to always keep a certain set of applications running even when you instruct windows to stop all programs.
Click to expand...
Click to collapse
Thanks. I suspected as much. Does everyone have jbed.exe on that list? From what I gather, it has something to do with java?
I have a strange problem with my Hero that is hard to describe. Even before I rooted my phone I had this problem which leads me to believe it could possibly be a hardware malfunction. Anyways..
The problem is that over time after a complete wipe and flash of a custom rom (I've tried several) that my phones slowly deteriorates. It will be running fast and great for a week or two and then its starts to slow down to the point where it is completely unusable and I am forced to wipe and flash again. While its acting this way I have tried killings tasks, emptying cache, hard resets... every simple solution I can think of....
The other odd thing is that I use my phone very lightly. I only install 4-6 apps and those are the basics like pandora and such...
And I'd like to add that maybe I'm wrong about my phone acted this way when I had 1.6 official on it. It's been awhile.... so maybe I corrupted something when I rooted my phone for the first time?
Really I wish you could see the way my phone acts... its ridiculous . I would take a youtube video of it if I wasnt too lazy too. Crazy stuff like it taking a whole 30 seconds to a minute for a unlock pattern to finally go through, Or how when I try and type a phone number its like 3 or 4 presses "behind" as I type ( and im not typing quickly) or when I try to scroll through my contact list it just gets stuck and then finally it "catches up" and stutters all the way down to the bottom because of how many swipes I attempted.....
...help
have you tried.....?
Have you tried to run an RUU of eith 1.6 or 2.1? if you runn an RUU it will clear out any lerking "software" issues and then just re-root and try that out then try a custom rom after that.
Try Autokiller from the market. Once you install it, run it. Set the autokiller settings to something like Optimum or Strict (if that doesn't work for you, try Aggressive).
This will adjust the low memory killer settings to a more aggressive number. This, hopefully, will help.
smash58 said:
I have a strange problem with my Hero that is hard to describe. Even before I rooted my phone I had this problem which leads me to believe it could possibly be a hardware malfunction. Anyways..
The problem is that over time after a complete wipe and flash of a custom rom (I've tried several) that my phones slowly deteriorates. It will be running fast and great for a week or two and then its starts to slow down to the point where it is completely unusable and I am forced to wipe and flash again. While its acting this way I have tried killings tasks, emptying cache, hard resets... every simple solution I can think of....
The other odd thing is that I use my phone very lightly. I only install 4-6 apps and those are the basics like pandora and such...
And I'd like to add that maybe I'm wrong about my phone acted this way when I had 1.6 official on it. It's been awhile.... so maybe I corrupted something when I rooted my phone for the first time?
Really I wish you could see the way my phone acts... its ridiculous . I would take a youtube video of it if I wasnt too lazy too. Crazy stuff like it taking a whole 30 seconds to a minute for a unlock pattern to finally go through, Or how when I try and type a phone number its like 3 or 4 presses "behind" as I type ( and im not typing quickly) or when I try to scroll through my contact list it just gets stuck and then finally it "catches up" and stutters all the way down to the bottom because of how many swipes I attempted.....
...help
Click to expand...
Click to collapse
tkirton said:
Try Autokiller from the market. Once you install it, run it. Set the autokiller settings to something like Optimum or Strict (if that doesn't work for you, try Aggressive).
This will adjust the low memory killer settings to a more aggressive number. This, hopefully, will help.
Click to expand...
Click to collapse
I agree. I use auto killer on aggressive with CM6 and it runs great forever
My phone does the exact same thing!
I first really noticed it when I flashed the official sprint 2.1 update. I think it has something to do with the buildup of cache on the phone.
I have been running CM6 for a little over a month and have recently noticed it getting slightly hung up at times, but nothing compared to how it was with the official 2.1 update. Also, remember that CM6 does not have Sense, which can really slow down the phone.
I also I agree with you that it seemed like my phone did not do this on 1.6, but it has been quite sometime since I flashed 2.1.
Does anyone know what really causes this exponential slow down; to the point where the phone is barely useable?
hm... I will try autokiller.....thanks for the advice
as for CM6..... I've tried not using sense UI but to me its my favorite part of my phone... for example the facebook/twitter/flickr integration with my contact list is invaluable.... is there a replacement for this?
is anyone else able to add anything else?
smash58 said:
hm... I will try autokiller.....thanks for the advice
as for CM6..... I've tried not using sense UI but to me its my favorite part of my phone... for example the facebook/twitter/flickr integration with my contact list is invaluable.... is there a replacement for this?
is anyone else able to add anything else?
Click to expand...
Click to collapse
Try Zen-Rom. It has all that you are looking for and is very fast and stable.
Sent from my Zen-Rom Hero!
Auto killer is the way to go. I found Aggressive setting too much for my tastes; if I was on a webpage, then went to the home screen for something else and opened back up the browser, it would have to reload it because it was killed. I set it on optimum, and get no slow down, and can still truly multi task.
chefthomas99 said:
Try Zen-Rom. It has all that you are looking for and is very fast and stable.
Sent from my Zen-Rom Hero!
Click to expand...
Click to collapse
Or NFX-Hero. I'm not a Sense guy, but I've experimented with that ROM, and it was the fastest Sense 2.1 IMO.
Just curious but does pandora have a cache file on your sdcard? I had an app that was reading and writting to a cache on my sdcard and it would slow my phone down a lot. When your phone slows try ditching some of your apps and see if maybe one could be responsible for it, if it is there are tons of options different apps that do the same thing.
Hi,
Yesterday, my touch pro suddenly became unresponsive.
The hardware buttons still seem to work sometimes with a delay, but the touchscreen only rarely responds and with a huge delay.
I seem to remember that this kind of behavior was the reason for my last hard reset, so that might help.
However, I would rather not do a hard reset since I have it configured the way I like it (nothing recent though to mess with the touchscreen or something, it really came on suddenly).
So 2 questions:
1) anyone else had this behavior and knows what went wrong?
2) any easy way to easily get back to my familiar configuration if I would hard reset?
TIA!
I've experienced this behavior once or twice using NRGZ ROM but I think it was partly due to my inexperience with the ROM itself at the time. Needless to say, I re-flashed and it seemed to have worked till it happened again a few flashes afterwards. I then suspected a possible bad block, I decided Task29 was the way to go. To my surprise, I have yet to experience anymore "freezes". Keep in mind, I don't use many of the mods nor apps to tweak my Fuze. So, I would say your experience will vary with each additional app or mod you use as I have attempted a few and noticed gaining either performance but lacking in stability.
As for how to get back your configuration after a hard reset, I use a few things. All of which are included in the ROM itself. Settings exporter and from time to time, I use XDA_UC which requires some prior knowledge but I hear if you use a lot of registry mods and the likes, it would probably be more beneficial. I also use MS MyPhone to get my contacts back.
n-Joie! (Enjoy)
One thing to try is a full backup/hard reset/full restore cycle. Sometimes it works, and sometimes it doesn't. Just use Sprite or some other backup utility (sk tools is better than sprite). It's easy enough to do, and you won't lose anything.
The other question is what else is going on? Are you really low on storage memory? Low on ram? How many processes are running? Perhaps you have some garbage processes (like manila.exe, lol) running that need to be killed or removed from startup. You might try running a storage memory cleaner (like in sk tools or clear temp), and see if that helps. You could also try running a registry optimizer. There's a tweak posted in this forum where you export the entire HKCR\CLSID registry key and then re-import it to your registry (immediately after), and it has noticeable speed effects on some actions (namely, switching SIP's). That might help you out. I do it now immediately after flashing, and it's a great tweak.
Let's see.
Hard reset, yes I know that might work, just first looking to find a reason and hopefully avoid that (or at least prevent it next time around).
I connected my touch pro to my pc at the moment and jeyo mobile companion gives me the folowing:
Power 63% (charging)
Program memory Free 58% 115.92/200.87
Storage Free 41 125.7/309.97
Storage card Free (same as above since I removed this one to check if that might have been the problem)
Task manager
|-Task
KMS 9 (checking if virusses might be the problem)
Desktop \windows\shell32.exe
|-Process
Doesn't seem to give anything
Is there a better desktop app to check my processes? 'cause this just can't be right.
Task29 seems to be to flash or something which I never did, I just didn't let the automatic settings thing continue last time I hard reseted because I don't want manilla and all that stuff, I installed Spb mobile shell among others...
SK tools I still have to try/install, perhaps I can use this to backup too... we'll see
Meanwhile, no viruses found, gonna install sk tools now (seems to be easier to control my device using MyMobiler than touch screen, although still teribly slow)
Thanks for the sugestions already and more always welcome
Wow, you're pretty low on storage (not dangerously, just low), but you're on a stock rom, so that's probably the reason. I couldn't tell you what desktop task managers to us; I'd just check your processess with dotfred's task manager, or use sk tools task manager if you're installing it. Also, try the registry optimizer in sk tools, and see if it helps (I'd do a full system backup first, though-it's a somewhat risky operation). And use the shortcut wizard in sk tools to create the 'compact heaps' shortcut. I have the issue where my buttons and the d-pad stops working, and running compact heaps usually fixes things (for a while). It's especially an issue using the capacitative part of the d-pad. That thing is incredibly unreliable.
I'd say the odds of a virus are really low, so I wouldn't have anything running in the background to monitor for them. If you have a good task manager, it's pretty easy to see if anything weird is running.
I removed the anti virus thingy, didn't find anything anyways.
I installed sk tools, did some cleans and it seemed to improve the responsiveness a little, but it's still useless a lot of the time.
I looked at the processes and tmail.exe seemed to be using a lot, is this normal?
I would copy the list of processes here, but atm I'm trying to get the device backed up as good as possible for a possible hard reset.
I am thinking about trying a non-stock rom, after backing up the stock one. Any suggestions are always welcome.
Thanks
Tmail's a normal process; I personally don't run it (there's a reg key in HKCU\Software\HTC\Bootlauncher that launches it at startup), but it won't mess w/ your device.
Hi,
I decided to do a hard reset, screen is responsive again.
Then I also decided to dump my ROM, install HardSPL and Energy Rom.
So everything is working now, still no real idea what went wrong.
Actually I hoped the Rom would improve speed more than it did. I haven't used TF3D for a long while, spb mobile shell was way faster than TF3D. So actually energy rom might be faster than the original, but when it was still working, it was actually quite OK using spb mobile shell.
Thanks for all the help, I'm glad it doesn't seem to be a hardware problem
Manila sucks the life out of the device. I'm pretty sure there are manila-free versions of NRG rom; you could give that a shot, since you like mobile shell. Might as well flash a few roms anyway and not fall in love with the first one you try, anyway.