=( i always seem to do something wrong.
I installed wm6.5 sprint by NFSFan and it works ok, but when i soft reset and it boots the screen goes black for a long time, i usually don't know why, i can touch the screen and press hardware buttons but can't see anything, i just This is frustrating if i have to really soft reset and use it =/
Help greatly needed/accepted.
my bad, i searched forums but it didn't appear, yet i search google and the post i wanted came up =)
Related
Hey all, just upgraded to thingonasprings rom and im pretty chuffed so far... only a couple of problems, im sure someone will be able to help me as a newbie. Keyboard and phone buttons seem to work fine, but the dpad, backlight, voice dial and camera buttons and volume control all seem dead and the power button doesnt always bring the screen back up, i have to close the lid and re-open.
Is anyone else having this problem? Can anyone confirm them to be working in another rom that is as good as thingonasprings?
ok, i guess no one else has this problem... can anyone recommend a way to capture when a button is pressed and what reference refers to that button? Is there anything in the registry storing a button reference followed by its action. I may not be using the correct terminology.
If anyone can help it would be very much appreciated.
Thanks in advance
try to reflash it again... maybe it would help.
Thanks for the reply
I tried reflashing, and even tried changing to a different rom (I am using thingonaspring's rom, but have tried Beasty & Laurentius as well). Im guessing that this is something kinda specific to my device as it seems no-one else has had this problem. I know that the backlight button actually works as I can use it to get into the bootloader, thats why im thinking it must definately be a rom / software issue. Ive been looking for an app I can use to trace a button press, but cant find anything. I really like WM6, but without these buttons / volume slider i may need to swap back to something else... i was running 2003 with wisbar but the performance didnt seem as good as it is now, and i love realvga (I dunno if it is supported on other versions of the OS).
ok, think im getting somewhere - went back to wm5 and all was fine, went to wm6 and they worked until i reset...then nothing... hard reset and they work, until i reset again.... anyone any ideas please?
now sorted changed rom to jwrights and its much better - thanks
Anyone else find this irritating? Each time I'm during a call, the screen goes blank. If I need to use the keypad or switch to speakerphone during a call, i first need to press the home key which turns on the screen, and then use any of the on-screen buttons. Even once the on-screen has been activated, and say I'm using the keypad, after few seconds the screen goes blank again, and I need to do it all over again...
Any way to get around this?
Yea its freaking annoying but i don't know of any solution for this. In the Raphel Tweaks thread many different things have been tried and failed so maybe something will come up soon enough
You can try tweak from Diamond forum - afair there was thread regarding this issue and some fix was provided.
Regards
B.
yea i did try it. but it didnt work on the touch pro..
I'd be very interested in a solution for this too. Pretty annoying.
I would just like to bring this thread back to the surface, to see if anyone has had any luck with fixing this yet. Very Annoying bug...
NoSleep!!!.cab worked for me, searchsearchsearch... I think Shinobi made it, sorry if I'm wrong on that.
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
i attempted to run the .cab file for battery status, and when i did that it started installing then suddenly froze, then upon resetting the phone using the button on the bottom, it loads to the today screen as it were, and then freezes and will not respond atall, i know it isnt a fault with the touch screen as i have to enter my PIN before it gets to the today screen.
i am new to this so do a "dummies" guide as it was any help will be gratefully recieved.
Richard
Um i have a feeling that you may have a little problem here.
I dont know a brilliant fix for this other than to say to do a hard reset. BUT this well restore it to defult, factory settings as when you got it. So back up your phone of anything important before you do it.
To do it hold down the start and ok buttons and press the reset button. Wait for it to bring up the screen saying 'to restore press send'.
I cannot think of a reason but if its crashing i would think that it would be having problems with loading the files for today so i would guess that on the grounds that the install didnt finish it has, unfortunately corrupted some files.
ahh thanks, got it sorted now
Hi,
I have some problems with my HTC Touch Pro, i searched this forum, i tried everything, soft reset, hard reset.. nothing is working.
When i Slide out the keyboard lights are going on, but is not responding, nothing is working.. When i press Caps or FN the little light wont go on, so it is not working. And the Buttons on the front of the phone (Answer call, Hang up, Home, Return buttons) isnt working aswell..
I hope you guys can help me with this, again.. i searched this forum and google for a solution but nothing is working.
(sorry for my bad english)
Did you install CE-START? or a other not default software keyboard?
No i didnt install anything, but if i did install something, it has removed right? because i did hard reset.... or doesnt remove hard reset all.. maybe some registry fault, but didnt do anything about it.
i did soft reset, hard reset, pushed the space bar hard (almost broked it). i tried like everything i've found on the net. I got it from ebay so dont know what to do with it now.