Broadband Timeout via the Registry (Omnia) - General Questions and Answers

I have a Samsung Omnia and wanted to set the timeout for the broadband connection in the registry.
I've done this before but for whatever reason I can't find the information on the Internet.
If anyone can help I would appreciate it.

Related

Bluetooth dun error 678

I have migrated from a Nokia E90 to the Touch Pro. I am a veteran Windows Mobile user, ever since the days of Windows CE, through Pocket PC 2003, 2003SE, 2005 and WM5.
I have a problem - I would like to use Bluetooth DUN to connect my laptop to the net. I used to do this with my Nokia E90 using *99#, so I know my phone provider will provide it. I can connect successfully using Internet Sharing over Bluetooth, but not using Bluetooth DUN. I get error code 678. I need to use Bluetooth DUN as I need to keep use the Bluetooth PAN on the laptop available to connect to my main computer.
Has anyone successfully connected via Bluetoot DUN yet? COuld you try it and let me know?
I've got the same problem. Fine on all previous phones. Now this one gives me this error.
Anyone solved it?
LLOYDY
Hi Guys!
Can you help with this problem? I've got this same issue. It's really annoying. I Can't also set up bluetooth connection between TP and my PC (Windows Vista).
Any idea?
See whether this can help.
http://www.windowsmobilecool.com/20...ows-smartphone-to-a-windows-pc-via-bluetooth/
My TP can do the BT DUN from my notebook now, but the problem is that it will disconnect after a short while. I am still trying to find out where is the timeout settings.
I did not look at the link but it looks like you guys have missed the apn information out of your extra initialisation commands for your modem
Ice_coffee: 'apn information out of your extra initialisation commands for your modem'
Can you provide those info ? And where to use it ?
I think this URL provide more detail, it works for me.
http://www.ppcsg.com/lofiversion/index.php/t94416.html
Go to the Device Manager, select properties of the Bluetooth Modem, click on the Advanced tab, paste the following string on the Extra initialization commands:
AT+CGDCONT=1,"IP","internet",""
Try to establish Dial Up again, use the following for the dialup dialogue box,
User name: Your Mobile No. [eg. 6591234567]
Password: 65IDEAS [I used this for Singtel]
Dial: *99#
This settings works for me.
excellent instructions here
http://www.filesaveas.com/gprsconnect.html#laptop
including pictures, showing just which settings need adding on your laptop, just copy and paste the gdcont info into the setup screen for your htc usb modem, as per the instructions, you will have to change the apn to the one for your provider.
Vodaphone = internet
O2= mobile.o2.co.uk
t-mobile = general.t-mobile.co.uk

Sharing Desktop's Internet Connection using WMWiFiRouter

Hello Everyone,
When we connect WM phones over Active Sync, we are able to run internet on WM Phone through desktop's connection.
So, I have this old XDA Stealth with me, and I thought of using it as a Wireless Router for sharing Desktop's Internet Connection with Laptops and other WiFi Devices.
Upon using WMWiFiRouter, I'm getting error saying there is no connection defined. That's right because I don't have any data plan and no modem has been defined.
So how can I share my desktop's internet connection with other devices using WM Phone as a Wireless Router (wherein the only way for WM Phone to access internet is through USB Cable and Active Sync).
I would appreciate any help.
Thnx
Sonny
In other words I wanna share Desktop Pass Through Connection over WiFi.
Please help, ain't there any way of doing this?
In other words, you want to share your internet connection that came from WM Wifi, to desktop computer,.
or
You want to sharre your internet connection that came fro your desktop wifi, to your WM device?
Do you want to achieve something like:
Internet->Computer->wired link->WM device->Wi-Fi->other devices
which if it's not possible in WMWifiRouter seems an oversight, and one which the development team may want to know!
Thats right! Its this way.
Cable Model >> Desktop >> Active Sync >> WM Device >> WM Device's WiFi >> Other Devices.
Ain't this possible, if I try forwarding Active Sync's IP?
Here is what I tried,
I configured WM Phone's WiFi's IP add to 192.168.0.1.
Next I got the connection detected on my laptop and pinged the IP and got the reply, but was unable to access internet. Guess ICS was not enabled.
Now how can I forward the IP for Activesync to be used as a gateway to access internet on the laptop through the WMPhone.
i have the same problem as the thread starter here....want to use my old pda2k as a wifi router for my e71...pass through works on pda2k but wmwifirouter doesnt work!
worked follow exact instruction on this page!
http://support.wmwifirouter.com/documentation/41/USB_to_Wifi
Hey Thnx!
I got it working!. But the range and speed sucks!
Is there any way of increasing the range of WM5 device's WiFi interface?
I'm planning to plug a wire to the WiFi antenna and connect it to an aluminium sheet which would be like a parabola covering one side of the phone, hope this would work well.
I would appreciate any suggestions.

Problem with internet sharing connection settings

I apologize if this has already been addressed. I looked, but couldn't find anything.
Here's my problem. I have a Tilt 8925 and WMWifi Router. My internet sharing connection settings are through Media Net. I have used this connection method for many months. Well, today, I connected my laptop through the WMWifirouter and everything was fine for about 5 minutes. Then my connection was lost, and upon trying to re-establish my connection, I notice that the internet sharing connection is trying to connect through AT&T ISP or something like that. I have repeatedly tried to switch it back to Media Net, but it keeps kicking back to the ISP setting. I have no way of connecting through ISP so, what happened and how do I fix it?
Thanks in advance!
Not sure if this is related or not. I never really paid attention to these settings before, so I can't say. If I look under the wi-fi connections settings tab on my phone, it brings up Configure Network Adapters. It is set to Virtual Ethernet Intermediate Miniport.......under that there are a whole bunch of other things. If I try to change it to IEEE 802.11b/g Compatible Wi-Fi Ad......, it appears as if it accepts the changes, bbut I then go immediately back into the settings and it is back on the virtual ethernet setting. Shouldn't I be able to change it, and could this possibly be why I can no longer connect using the WMWifiRouter?
Any help at all, please???!!!!
Even just a response of I'm not sure is better than no response at all.

[Q] Tunes Remote+ and Itunes pairing on public network

Hi there, people.
I got a question, hope someone can help me out.
I am trying to pair my android device with iTunes using TunesRemote+-.
Problem is: I'm using a public network, so iTunes can't see my mobile device trying to connect. Anyone can tell me how should I set up my Windows (7) firewall or anything else I can do.
If I change my network settings to "home network" I can connect no problem. But I would prefer to keep my network as public (since it is public).
Using Remote for iTunes (Hyperfine Remote for iTunes) I have the same problem. However if I set up my network as home network, pair the device to iTunes and then change the network back to public, Hyperfine will continue working, but TunesRemote stops working as soon as I set the network as public...
Thanks in advanced.

[Q] Setting Up Android Wireless Internet Domain?

Hello Guys,
Please does anyone know how to set up androids wireless network domain?
For instance, if I connect to a wireless network which is running on a particular domain, in order to connect to the internet of that wireless connection, i need to specify its domain. Android is not able to pick up the correct domain or if it does, i cant see it and due to that I wish to set it up manually.
I tried using iphone and I was able to edit the domain settings but when I come back to Android which is my favorite, I cant seem to edit the domain. Cant even find where it is, in order to set it. Thus I am able to connect to the wireless network but cannot use its internet on my phone.
By the way, I am using a google nexus 5.
Any help would be appreciated a lot.
Thank you.
Frisbeeous said:
Hello Guys,
Please does anyone know how to set up androids wireless network domain?
For instance, if I connect to a wireless network which is running on a particular domain, in order to connect to the internet of that wireless connection, i need to specify its domain. Android is not able to pick up the correct domain or if it does, i cant see it and due to that I wish to set it up manually.
I tried using iphone and I was able to edit the domain settings but when I come back to Android which is my favorite, I cant seem to edit the domain. Cant even find where it is, in order to set it. Thus I am able to connect to the wireless network but cannot use its internet on my phone.
By the way, I am using a google nexus 5.
Any help would be appreciated a lot.
Thank you.
Click to expand...
Click to collapse
+1
i too want to know , how to do that ??

Categories

Resources