So, I'm already getting tired of plugging into the USB every time I want to transfer file. Is there anyway to transfer file without using the hard wire? WLAN or bluetooth or any suggestion are welcome! Please show me how to do it though! (Because I tried and searched but can't figure it out!)
Thanks
The phone supports bluetooth FTP, which allows just what you're looking for, I would type up a description but im sitting on the floor typing on my phone.. so maybe someone else can But in a nutshell, pair the 2 devices, (both must support bluetooth ftp), set up a bluetooth ftp share on the phone thru the bluetooth settings app, connect to the phone over bt.
its notably slower than the usb2.0 transfer though.
bluetooth
beam file thru bluetooth from a laptop or pc. set your phone to discoverable under bluetooth settings and on your bluetooth enabled pc you should be able to right click a file and click on sent to... and bluetooth device should be an option. a new screen will show up where you can search for nearby bluetooth devices and the rest should be self explanatory, the default password should be 0000 unless you changed it. hope this helps. bluetooth is rather slow tho. i usually only use this method for small cab files. i use the usb cable or a sd card reader for bigger files.
Great! I finally figured it out. So I have to enable FTP on this phone. lol
Total Commander has a LAN plugin that'll allow you to access samba shares on other computers. should be much faster than transfers via bluetooth as it's done over wifi.
You can also use Activesync.
vexingv said:
Total Commander has a LAN plugin that'll allow you to access samba shares on other computers. should be much faster than transfers via bluetooth as it's done over wifi.
Click to expand...
Click to collapse
I can access shares on my computer without samba or Total Commander. I just use file explorer.
This is really easy-peasy.
All you have to do is connect your phone to your Wi-Fi network, and then go into the File Explorer.
Click Menu > Go To > Open Path > New Path...
In the dialog box, type in the path to the share on your PC (yes you need to share the location on your PC that you want your phone to be able to access), for instance;
\\mypc\sharename
Click OK
Now you will be able to browse the folders on your PC and transfer files to/from it to your heart's content, just like you were looking on your own phone's filesystem.
Happy file transferring! :O)
ur awesome!!!!
Need help
Jim,
I must be a bit thick. I have my network set up for file sharing, but when I followed your instructions, I get a Network Log On screen and I'm not sure what I need to enter. User name... Password.... Domain.... ????? I'm already logged on securely to my WiFi network, so I do not understand what I should be entering here.
Can someone help me out here?
Thanks very much.
Skydog said:
I have my network set up for file sharing, but when I followed your instructions, I get a Network Log On screen and I'm not sure what I need to enter. User name... Password.... Domain.... ????? I'm already logged on securely to my WiFi network, so I do not understand what I should be entering here.
Click to expand...
Click to collapse
Sounds like you need to enter your WINDOWS username/password to log in to your windows pc.
You may also need to create some shared folders on the windows pc if you have not already.
As mentioned, my network is already set up for sharing (among several systems) including specific drives and folders.
I already tried using my Windows username and password, without success, which is why I posted my question.
I'm still clueless.
I'd love to get this to work, but I'm not getting anywhere either.
I do have network shares set up.
I'm connected on wifi.
I go to file explorer->Menu->Open Path->New Path and put in \\Laptopt2310\test which is the computer I want to connect to and a shared folder on that computer.
I get a popup pointing to my wifi indicator saying cannot connect with current connection settings. To change your connection settings, tap Settings.
If I tap settings, it takes me to a connection set up where it says Verizon Wireless with some options under and My Work Network with some options under that.
The advanced tab has a box for select networks and I have Verizon Wireless in the Internet box and My Work Network in the private network box.
I don't want to touch anything there and screw things up.
It's almost like it's trying to do it over the phone's data connection and not wifi, but I did a quick speed test and at least the internet browser is definitely using the wifi connection.
Well, I figured out that I could also do this in resco and total commander.
Both of them connect fine on wifi. Not sure why file explorer doesn't, but I guess it doesn't really matter now.
What's the secret?
I also use Resco. Can you explain exactly what you did to make a successful connection?
Those of you still trying to use File Explorer, the username, password and domain should be your Windows username, Windows password and the name of your PC respectively.
If you don't get any joy using the PC name as the domain, or in the path dialogue, you can use the ip address instead - it may be that your network is having problems resolving names to ip addresses.
Trust me, it really does work, I've never had a problem using it at home on a perfectly bog-standard wi-fi network, with the shares on a Vista PC (it also worked with Windows 2000 before that).
Obviously, you have to be sure you're using your Wifi network and not GPRS / HSDPA.
Hope that helps!
Jim,
After some tinkering, I was successful in getting the Fuze on my network. What a great tip! Many, many thanks for sharing this with us.
No problem, happy to help.
I'm sure this is all in the manual somewhere ;O)
I can pair my phone with the computer through bluetooh, but in the bluetooth settings menu when i select my computer I only see 'Wireless Stereo' and 'Headset' as service. Is this because the laptop might not support bluetooth ftp? Its a new Lenovo T400 with built in bluetooth, I figure that should support it?
Any help is appreciated. Thanks
Don't bother with bluetooth, it's too much hassle, just use the File Manager over Wifi, it's far easier!
But what if I really do want to use bluetooth...?
When I view my bluetooth devices on the laptop I can click properties on my Touch Pro and see the following services: A2DP, Active Sync Bluetooth service, Dial-up networking, Headset audio gateway, Object Push (Obex)
On the phone I go Start->Settings->Connections->Bluetooth and then select my laptop that i'm tethered to and I only see Wireless Steroe, ActiveSync, and headset.
Am I missing drivers on one of the devices? It looks like its possible something wrong on the TP seeing how my vista laptop is listing obex as an option...
Any help is appreciated
Ok, I am really looking forward to using this Gmote app, but I am having some trouble with connection. I want to connect it to my desktop computer, but I dont have a wireless card in it. I have a wireless router though. I followed the instructions on the website's FAQ about connecting with 3G and IP, but it did not work. Also, when I went to a website called Portforward.com, they mentioned I need to have a Static IP. Is this required or not, since it looks a little bit complex, and the Gmote website does not mention it. Also, when I go to my NetGear router's webpage and add a new custom service, I fill in all the ports and also my computer's lan IP code thing (10.0.0.x). After doing so, no services appear in the table (it seems as if they should be appearing). I was wondering if there is something wrong with the router website, or if I am doing something wrong. When turning on the app via phone, I select "enter IP manually". The ports are already pre-written, so all i enter is the IP (10.0.0.x). That did not work so then I tried with the IP i recieved from the link on the website's FAQ (whatsmyip.com, etc) (1.x.x.x.x.x and such). It did not work again. Also, i do not have WiFi enabled on my phone, but i have 3G. Would that matter or not.Please help soon since I am really looking forward to using this app. Thank you.
the website is just Gmote(dot)org
So my school just got net books for everyone and also WiFi, but the problem is that my android phone can connect but it cant use it. at first i thought they somehow banned everything but the net books but when i brought my laptop it connected just fine:. so what do you think they did. do you think it could be the mac?
p.s. i can only use internet explorer on my laptop and not firefox.
Just found out that i am in the wrong sub forum can an awesome mod move for me? thanks
It depends of a lot of settings.
What is the encryption mode used on this network? (open, WEP, WPA, WPA2-TKIP, WPA2-AES)
Is the laptop owned or managed by the establishment? (ie: is it registered on an Active Directory domain?)
Is it using an enterprise authentication method (ie: 802.1x)?
If so, which authentication type is it using (ie: TTLS, PEAP) and the inner authentication protocol (ie: MS-CHAPv2, GTC)?
You might have to put your network credentials in order to connect to the wireless if they are using 802.1x.
For your Firefox issue, maybe you could try setting it to use your Internet Explorer's proxy settings and see if that fix the problem.
Something similar happens to me at work, but in this case they are using an automatic configuration scrip to connect to the web.
How can I use the configuration script in my android device
j0an said:
Something similar happens to me at work, but in this case they are using an automatic configuration scrip to connect to the web.
How can I use the configuration script in my android device
Click to expand...
Click to collapse
You cannot. Find out the proxy address and port and download something like TransProxy.
does anybody know the ip address for the hotspot? i tried a few of the common ones but i cant get anywhere. hoping to find some advanced settings for wifi. any help is much appreciated.
a-n-d-r-e-y said:
does anybody know the ip address for the hotspot? i tried a few of the common ones but i cant get anywhere. hoping to find some advanced settings for wifi. any help is much appreciated.
Click to expand...
Click to collapse
Connect your PC, then do an "ipconfig" from a cmd shell (assuming Windows). That will tell you both the address assigned to your PC and to the phone (the default gateway).
The webpage at http://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address.
this is the error message i get every time. could it be locked? or is nothing there?
i want to extend the network to my wireless router connected in my house. it will give me access to my printer and my hdd because they are connected to my wireless router. cant figure out how to do it.
The advanced settings are configured through the phone itself, I don't think it has a web interface.
You also won't be able to link it to your home wireless. Those home devices would need to connect to your hotspot wireless.
a-n-d-r-e-y said:
The webpage at http://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address.
this is the error message i get every time. could it be locked? or is nothing there?
i want to extend the network to my wireless router connected in my house. it will give me access to my printer and my hdd because they are connected to my wireless router. cant figure out how to do it.
Click to expand...
Click to collapse
You would need to use a custom firmware like DD-WRT or Tomato on your home wireless router to do what you want. You would have your home router link to the TB and then everything else to the router. This would also make the rest of your devices connect to the internet through the TB. Probably also not supported or liked by VZW but you can technically do it.
I am using ARHD ROM (with Bricked Kernel).
My car can access and read out RSS threads and has a lot of interactive media functions, including being able access the internet via my bluetooth enabled phone. But I can't seem to get it to work fully, and really don't know if it is a ROM / Kernel / Phone issue or a car issue. I just don't know enough about the various bluetooth protocols etc, and as much as I research it, I keep going around in circes.
The car will connect to the phone and work fine as a bluetooth headset for telephone calls. It will also display the caller picture without issue and will access and read out my emails (using stock sense Mail client) and SMS messages. It also seems to connect to audio OK (although I never use it as it has a USB port that will accept a pop drive, so all my music is on the dashboard).
But the internet connection doesn't seem to work. I have looked into this and can't work out if it is a PAN or DUN profile issue. Soemtimes I can get the phone to show an internet connection being available to the car, sometimes it doesn't depending on which ROM I use and I can't seem to get any to work regardless.
Looking on the website, it claims the following:
How can I configure my mobile device for internet or BMW TeleServices usage?
In the operating manual of your mobile device you will find instructions on configuring “Access Point Name (APN)”; other names for this may be “Internet Settings”, “Modem Settings” or “Tethering Settings”. The required settings are available from your service provider. Please note that most Sony Ericsson mobile devices only recognise the first entry in the APN list, so it is recommended that all other APN configurations be deleted.
Can somebody please help me with this. I really am baffled as to how to get this to work.
Sent from my HTC Sensation Z710e using Tapatalk
Bump. Anybody?
Sent from my Motorola DynaTAC using Tapatalk (feels like it at times with this phone)
It has been a year or 2 since I got bluetooth networking going. Today I tried to get my phone to connect to my windows 7 desktop and.... it couldn't even connect sadly enough. Anyways this is from memory so it may or may not be correct. I don't like posting incorrect stuff because you never know who will read/flame.
1. pair your phone to the other device
2. connect via bluetooth your phone to the other device
3. I used the app in the link below to turn on bluetooth tether. Your kernel needs to support this feature. Just a note, there are 2 apps off the link. One is wifi only, the other does bluetooth and wifi. Assuming you get this app, turn on bluetooth tether. I don't know if you should turn tether on then connect bluetooth. Maybe it doesn't matter.
4. This step I don't quite understand. The bluetooth tether should "offer" a network service to the remote device. The remote device in turn must recognize the service and use it. DHCP is the easiest to auto configure everything. If you need a name server, use 8.8.8.8 since that is a public dns server by our google overlords.
http://code.google.com/p/android-wifi-tether/