Something's gone wrong with device detection when using OBEX send.
I can find and pair devices fine, but whenever I try to send a file I get a list of:
???
???
???
And regardless of what I choose it tells me device not supported. This is still happening after a soft reset and I really don't want to go down the path of a hard reset, so anyone have any ideas?
I have the same problem with my 7510
Does anyone know what's the problem?
Everytime i face this problem,i turn the bluetooth off and do a soft reset,turn it on again and it works fine.
Thanks alot Xotic_X_tremist
But it's really annoying
Any Other Solution?
Xotic_X_tremist said:
Everytime i face this problem,i turn the bluetooth off and do a soft reset,turn it on again and it works fine.
Click to expand...
Click to collapse
yes, bluetooth sometimes gets stuck for unknown reasons.
i don't even need to do a soft reset, just use the comm control option, turn it off, then turn it back on, and it works great.
Related
hi im havng problems enabling wifi. but i have realised when hsdpa is enable wifi can not be turned on is this normal. when i disable hsdpa wifi can be enabled. is this correct?
No this is not normal. They should both work. Can you give us any more info, ie. did it ever work? Have you tried a hard reset?
hi,
just found out that my camera doesnt work now! did work b4. yes hspda did work b4 with wifi i have hard reset a few days ago. should i hard reset it again?
rom 1.25.405.1 WWE
radio 1.58.21.23
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
intrancer said:
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
Click to expand...
Click to collapse
Are you sure you have performed a HARD reset. A hard reset means that your device is in the same state as when you first took it out of the box.
If then the WIFI fails to switch on, you probably have a hardware problem and should send the device for repairs.
I have had a problem with the WIFI function as well. In my case it was caused by a program which allows the Cruise to act as a WIFI access point. After using that software once, the WIFI cannot be switched on any more. I have had the same problem on my "standard" Touch.
Robin
hi mate,
yes i it is a hard reset everything deleted and restored to orignal state. looks like i need to contact HTC. did u send yours in for repair or did the hard reset resolve the issue?
the strange thing is the wifi did work before
intrancer said:
hi mate,
yes i it is a hard reset everything deleted and restored to orignal state. looks like i need to contact HTC. did u send yours in for repair or did the hard reset resolve the issue?
the strange thing is the wifi did work before
Click to expand...
Click to collapse
In my case the hard reset resolved the issue both on my original touch and on my touch cruise. The latter needs to go back for repairs now anyway because the speaker has decided not to function anymore.
Robin
intrancer said:
has anyone found a reason why wifi cannot be turned on??? min use to work fine and now it doesnt switch on i have hard reset it has made no difference,
Click to expand...
Click to collapse
I'm having a similar problem on my Cruise. My WiFi is switching on in the Comm Mgr. I see the icon working for a couple of seconds then it seems to freeze. I try to sign in on Skype or access an Internet site with no success. Strange. It was working a couple of days ago.
Am at the moment using a Laptop via a WiFi connection, so it's not a general WiFi connection problem.
Appreciate some advice.
Hi
Just a quick extra comment to my question above. Would a Hard Reset really help? Or is this just an option to find a solution?
hi i called htc and returned the device for repair i will update on the progress
I've bought 2nd HTC Tornado (Vodafone), I cannot turn on wifi, when select WLAN setting-Connection Status it's notice that : "Driver is not loaded"
Anyone please help me, thanks!
Some Tornado does not come with WiFi module
karhoe said:
Some Tornado does not come with WiFi module
Click to expand...
Click to collapse
thanks how can we check this status???
I had a similar problem on Typhoon with bluetooth once. Same message appeared every time I tried to enable bluetooth. Hard reset and even reflash didn't helped at all. I thought bluetooth module died so I bought Tornado. After some time I tried to flash this phone to WM6 and suddenly bluetooth worked again. But don't ask me why
Kylexd said:
I had a similar problem on Typhoon with bluetooth once. Same message appeared every time I tried to enable bluetooth. Hard reset and even reflash didn't helped at all. I thought bluetooth module died so I bought Tornado. After some time I tried to flash this phone to WM6 and suddenly bluetooth worked again. But don't ask me why
Click to expand...
Click to collapse
i've tried more than 3 times up to WM6 but still the same!!!
From what I've seen, tornado's with Wi-Fi have that big hump on the top, like mine, not sure if you can tell from picture on my profile. Perhaps, could you tell us some more about what it does when you try to turn Wi-Fi on? Maybe that'll light up some thoughts.
markanthonypr said:
From what I've seen, tornado's with Wi-Fi have that big hump on the top, like mine, not sure if you can tell from picture on my profile. Perhaps, could you tell us some more about what it does when you try to turn Wi-Fi on? Maybe that'll light up some thoughts.
Click to expand...
Click to collapse
when I try to turn Wifi on, nothing happen in Communication Manager it's still disable ( green light didn't show!!!)
In Wifi Setting it indicate that "driver is not loaded"
Vodafone v1240 is wi-fi equipped and does not have the "hump" at the top. Ask me how I know. If your Vodafone is not a v1240, then it's not a Tornado.
However, I've never had a problem with getting it to work. I never tried it with WM5, as I had the phone all of twenty minutes before I flashed to WM6.
djsleepwalker said:
Vodafone v1240 is wi-fi equipped and does not have the "hump" at the top. Ask me how I know. If your Vodafone is not a v1240, then it's not a Tornado.
However, I've never had a problem with getting it to work. I never tried it with WM5, as I had the phone all of twenty minutes before I flashed to WM6.
Click to expand...
Click to collapse
Fulfilling your request; ¿How do you know? LOL I didn't see your sig!
So P4bus, have you considered upgrading your ROM? Have you tried HARD RESET? That should reload all drivers and settings. Though you will loose any info/programs/data/changes that have been done to the phone since. Or perhaps, upgrade to WM6 or WM6.1 ? I strongly recommend Nitrogen's WM6, of if you want to go up to WM6.1 you can try GnatGoSpat's. He just anounced he's working on further changes and bug fixes, and will be re-cooking and posting new ROM about mid this week.
Regards.
markanthonypr said:
Fulfilling your request; ¿How do you know? LOL I didn't see your sig!
So P4bus, have you considered upgrading your ROM? Have you tried HARD RESET? That should reload all drivers and settings. Though you will loose any info/programs/data/changes that have been done to the phone since. Or perhaps, upgrade to WM6 or WM6.1 ? I strongly recommend Nitrogen's WM6, of if you want to go up to WM6.1 you can try GnatGoSpat's. He just anounced he's working on further changes and bug fixes, and will be re-cooking and posting new ROM about mid this week.
Regards.
Click to expand...
Click to collapse
"Press and hold down the 2 external buttons down the screen (start and contacts buttons), and then press for a 1.5 seconds (important) the power button. Release them. If you have done all ok, you must see a screen telling you to press "0" to reset your phone to factory. If it starts normally repeat the process."
this is hard reset Tornado???
p4bus800 said:
"Press and hold down the 2 external buttons down the screen (start and contacts buttons don't release till u see the black screen), and then press for a .5 seconds (important) the power button. If you have done all ok, you must see a screen telling you to press "0" to reset your phone to factory. If it starts normally repeat the process."
this is hard reset Tornado???
Click to expand...
Click to collapse
See corrections in RED. Hard Reset = "Clear Storage" START--> ACCESSORIES---> CLEAR STORAGE: Type confirmation word shown on screen, and press YES. Phone will boot to factory defaults.
I've read specs on the 2125 andit says there is no wifi, sorry. http://www.smartphonehistory.com/specs.php?UID=24http://www.engadget.com/2005/12/04/cingular-2125-htc-faraday-p-reviewed/
After Hard Reset or Clear Storage, it's still the same cannot use wifi!!!
p4bus800 said:
After Hard Reset or Clear Storage, it's still the same cannot use wifi!!!
Click to expand...
Click to collapse
Would you care to please specify what is your phone TradeName and Model? e.g. T-Mobile SDAII.
I've a SDA US and I've the same problem, I tried with Hard reset and nothing, it still not working.
Best regards
Hope someone may be able to help. Recently on my S6E, whenever I make or answer a phone call the speaker phone is always turned on. Any idea how to remedy this? Its quite annoying.
Thanks
BassTeQ said:
Hope someone may be able to help. Recently on my S6E, whenever I make or answer a phone call the speaker phone is always turned on. Any idea how to remedy this? Its quite annoying.
Thanks
Click to expand...
Click to collapse
Dear @BassTeQ
See if this helps go to [S voice settings] and uncheck auto-start speaker
Regards
bluff master said:
Dear @BassTeQ
See if this helps go to [S voice settings] and uncheck auto-start speaker
Regards
Click to expand...
Click to collapse
Hi @bluff master,
Thanks for your reply, I have tried that, the option was already disabled.
BassTeQ said:
Hi @bluff master,
Thanks for your reply, I have tried that, the option was already disabled.
Click to expand...
Click to collapse
Anyone ??
BassTeQ said:
Anyone ??
Click to expand...
Click to collapse
I had the same horrible issue, i tried some fixes online but it didn't work, i had to restore.
hosmsdos said:
I had the same horrible issue, i tried some fixes online but it didn't work, i had to restore.
Click to expand...
Click to collapse
Ohh dear, not the answer I wanted to hear. Glad to see I'm not the only one with the issue. So you did a factory reset to resolve it?
Same here. After so many bugs I am about to sell that damn thing. It really is a shame! Common, but those are core basic things that should never NEVER ever have issues like this!
I have the same issue since a day... I tested many workaround ut nothing works and I will not do a factory reset for that!
Hope we will find a solution.
I read a lot of posts speaking about a USB connector issue.
The connector needs to be cleaned or changed.
Any one have more info ?
For those who are interested, I really think it is a software bug because when I connect my phone into my car in bluetooth, the speakerphone shut off.
So it's so annoying to manually cut the speakerphone that I decided to reset my phone today.
I'm currently doing a backup with Helium (because I'm not yet rooted) and then I will do a factory reset.
I will keep you informed.
Problem still persists. Please keep us informed.
Finally...
After resetting my phone the problem is solved !!!
I reinstalled all my applications and it is still ok.
Now the question is for how long...
You know what you have to do.
Enjoy !
I for sure won't do that! I'll better be selling this bug loaded piece. Memory leakage issue is driving me nuts. Can't handle 3 apps without having to reload them every time. Veeeery disappointed. And I mean common.. the basic calling feature is not able to work properly.. WTF
Seems like not many are facing this issue? It came out of nowhere on mine and I really dont want to reset my phone for this. I'd like to keep this thread active.
Just reset your phone and that's it!
Sent from my SM-G920F using XDA Free mobile app
Same problem here and same case. When on Bluetooth in my car, the speaker will not auto enable, but whe I turn off BT, the problem persists. I tried the Svoice, The Partition Cache cleaning, the reset, etc. Up to now, no positive results.
I admitted defeat and reset my phone, problem gone
I've solved my speaker phone problem
Hi,
I use note 4 and had similar problem. After long testing, I've found out mine was related to Gear VR. If I turn on "do not disturb" inside the Gear VR setup Menu and unplug the phone. My phone will always go into speakerphone. Very annoying. If I go back into the Gear VR and enable the "do not disturb" and then disable it again (so "do not disturb" is off). My speaker phone problem goes away.
Do you use Gear VR on your phone? If you do, then your speaker phone issue is probably related to the problem I had.
I hope this post will help some of you.
i got here by doing google.
my phone is doing that too. everytime i answer the phone, the speaker is on, i have to turn it off everytime !
cant find any setting to disable it, i think i going to reset my phone too.
@netnerd, Never found a fix, quite easy to do a backup and restore using Helium app after resetting the phone.
Hey guys,
yesterday I noticed that Bluetooth is switched off on my S7. I tried to switch it on again, but the slider/button in the bluetooth menu just stays gray, even though it moved to the right. It looks like the phone is not able to start blutooth for whatever reason. WiFi works without a flaw. My phone is completely stock, no root, no knox, no custom rom. I'm on stock rom G935FXXU1DQJ1
Any ideas how to fix this?
Try to perform a hard reset. Maybe there is a bug in your phone.
RossTeagan said:
Try to perform a hard reset. Maybe there is a bug in your phone.
Click to expand...
Click to collapse
Well I was hoping to find a solution without having to wipe everything. Without knowing if it will fix the issue, it would take me several hours of lifetime to setup the phone from scratch.
Ok - this is very strange. I'm still using the phone currently as it is and I'm wearing my Gear S2 smartwatch to at least know what time it is, but throughout the day bluetooth actually turned a few times on, synchronized with the watch and suddenly switch off again.
I was trying to stream music to a bluetooth speaker during one of the phases in which bluetooth was working, but the music stops after several seconds and bluetooth switches off again.
What the ....?
Ok I think I fixed it. Resetting all connectivity settings did the trick for me. Although I now need to reconnect to all the devices and WiFis. Still better then doing a factory reset
Hi,
I want to ask if someone else has the problem that if the bluetooth is enabled
it automatically disabley if you put your phone to standby and wake it up again?
It happens with my phone even if a device is connected or not :/
- My device is locked and Stock 5.1.5
// EDIT: The Solution was to uninstall FireChat. Don't know why but this programm was the reason for the disconnects.
Maybe not the same issue, but mine has been disabling bluetooth every 5 minutes. Been driving me crazy and I'm currently troubleshooting it now. As far as I've been able to tell something is calling disable() on the bluetooth adapter (in catlog at least).
EDIT: Turning off bluetooth scanning in location settings seems to have fixed my issue.
I had the same problem on Oneplus 6. Indeed, uninstalling firechat helped.
Engelm said:
Hi,
I want to ask if someone else has the problem that if the bluetooth is enabled
it automatically disabley if you put your phone to standby and wake it up again?
It happens with my phone even if a device is connected or not :/
- My device is locked and Stock 5.1.5
// EDIT: The Solution was to uninstall FireChat. Don't know why but this programm was the reason for the disconnects.
Click to expand...
Click to collapse