palm 750 no network and sound
after i flach to language to french
princegsm said:
palm 750 no network and sound
after i flach to language to french
Click to expand...
Click to collapse
i fix this problem by formatting the phone press and hold red button and remove and re-insrert bettery while holding red button after that u will see a message on screen press up arrow ki phone will restart and everything will be Ook.
Take Care
ENJOY
Related
:shock: Gasp, a problem with my MDA! :shock:
Hello everyone, I was holding my mda in my hand today, and suddenly the phone beeped, and then turned off. This sounded like a submarine sonar. Anyways, when I turn it back on now it will go to the t mobile screen ( boot screen ) load up the first 4 lines of red characters, and then hang. It will not do anything, and eventually it will beep. It does this regardles of power source (wall/battery). The four lines that it loads are :
ipl 1.08
spl 1.08
gsm 01.09.01
OS 1.8.10.2
After these load the windows loading icon that spins appears in the middle of the screen and the system makes the same sonar booey sound. MY MDA WILL NOT TURN ON!!!!!!!!!!! Thanks in advance for all the help, does anyone know how to fix this?
David Sondergaard
Poor man!! but hehe... your savor is here!!!
you need to press the Camera button then press reset (DON"T RELEASE THE BUTTON UNTIL THE 3 COLOR STRIPS COME OUT) --> ALready enter USB mode, from here you can flash your ROM (Recomended with Oringinal ROM)...
I have exactly the same problem and it work on mine...
Good luck man!
pls see this link. http://forum.xda-developers.com/showthread.php?t=250709
if you have further question email me: [email protected]
My prophet is dead...
I try to upgrade my prophet to WM6...work sucessfull
When i try install MORANGE in my prophet its error (hang)..so i try to reset.
After i push the reset button my prophet is dead...i can't do anything.
I try hard reset is still not working...i try to plug in charger -> RED LED indicator not show.
It really..really DEAD PROPHET...
Please help me with my prophet.
It still dead until now...
novian said:
My prophet is dead...
I try to upgrade my prophet to WM6...work sucessfull
When i try install MORANGE in my prophet its error (hang)..so i try to reset.
After i push the reset button my prophet is dead...i can't do anything.
I try hard reset is still not working...i try to plug in charger -> RED LED indicator not show.
It really..really DEAD PROPHET...
Please help me with my prophet.
It still dead until now...(
Click to expand...
Click to collapse
try another battery.
still not work...
dioxda2 said:
try another battery.
Click to expand...
Click to collapse
novian said:
still not work...
Click to expand...
Click to collapse
how can you hard reset?
do you really know how to?
if it still can turn on, will be recoverable...
PROPER INSTRUCTION
1. Press POWER button to off unit (if unit is ON)
2. Press CAMERA and COMM buttons simultaneously
3. While holding down CAMERA and COMM buttons, use stylus to poke the RESET button at bottom of unit.
4. Release pressing of the RESET button, and continue to hold on to CAMERA and COMM buttons until message appear on the screen asking you to press the SEND (green phone button) to continue.
thats right ?
will be recoverable ?....Oh My God..
it's really can't do anything else ?
because my prophet still can not show the light charger..still DEAD
dioxda2 said:
how can you hard reset?
do you really know how to?
if it still can turn on, will be recoverable...
Click to expand...
Click to collapse
novian said:
PROPER INSTRUCTION
1. Press POWER button to off unit (if unit is ON)
2. Press CAMERA and COMM buttons simultaneously
3. While holding down CAMERA and COMM buttons, use stylus to poke the RESET button at bottom of unit.
4. Release pressing of the RESET button, and continue to hold on to CAMERA and COMM buttons until message appear on the screen asking you to press the SEND (green phone button) to continue.
thats right ?
will be recoverable ?....Oh My God..
it's really can't do anything else ?
because my prophet still can not show the light charger..still DEAD
Click to expand...
Click to collapse
you are right, those step are very precise
so, can successfully hard reset?
PS. if the battery is not flat, please don't plug the power cable at the beginning.......
plug later when the device goes fine ( sometimes the device won't continue to boot if the power cable was plugged...
not successfully with hard reset..the prophet just blank screen...nothing else.
i try connect my prophet to pc its not detect...
how can i know the device goes fine?
for your information..if i try charge the batery (with no RED LED indicator) for may be 2 hour and then i unplug the charger...after that i try remove the batery the device show the white screen for a second like blitz...just like that.
i try insert he batery againt and doing hard reset still nothing...i plug the charger still light off...hiks...hiks...
dioxda2 said:
you are right, those step are very precise
so, can successfully hard reset?
PS. if the battery is not flat, please don't plug the power cable at the beginning.......
plug later when the device goes fine ( sometimes the device won't continue to boot if the power cable was plugged...
Click to expand...
Click to collapse
novian said:
not successfully with hard reset..the prophet just blank screen...nothing else.
i try connect my prophet to pc its not detect...
how can i know the device goes fine?
for your information..if i try charge the batery (with no RED LED indicator) for may be 2 hour and then i unplug the charger...after that i try remove the batery the device show the white screen for a second like blitz...just like that.
i try insert he batery againt and doing hard reset still nothing...i plug the charger still light off...hiks...hiks...
Click to expand...
Click to collapse
Too bad....., it does look like hardware damage.....
needs to bring to repair shop or nothing else..... good luck~~~
update condition :
my prophet if i plug usb cable..my prophet just blink-blink (white screen for a second..continue)
i press reset blink-blink STOP...but if i release reset buton blink-blink againt.
any solution for this situation ?
any one can help me ?
help!!!
i tried to upgrade to i-mate, first i unlock it using "awizard" then i use lokiwiz 02b, then i followed the instructions.. i upgrade to "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe" the process was so smooth until 100% but when restart, i cant boot anymore, it stucks in the scren with black and the white light on the screen keeps on blinking.. help please.. im so frustrated..
spl 2.69 g3
sorry idont remember the other info.. please, please help me..
R.I.P Dopot 818 Pro
I also have the same problem. First time I was interested with the upgrading proses by looking around the forum. They said noting would be wrong, nice display, try it. But actually the upgrading process to wm6 or wm6.1 are not stable. My Dopot 818 Pro also are now dead coursing by the upgrading from wm5 to wm6. Before upgrading I've asking around, many of the expert said do not upgrade, its not stable, but I just would listen and done the upgrading proses and that was the last time I saw my prophet functioning and its dead now..
I using a very simple basic Nokia phone now & I happy about it, I will not do the unstable upgrading again in the future..
I have the same problem, but don´t have solution :-(
I am finding the solution as well.
novian said:
update condition :
my prophet if i plug usb cable..my prophet just blink-blink (white screen for a second..continue)
i press reset blink-blink STOP...but if i release reset buton blink-blink againt.
any solution for this situation ?
Click to expand...
Click to collapse
sorry im trying to hard reset the phone too,can anybody tell me which is the COMM button,i cant find it,thanks
well?......
SicilianBoy said:
sorry im trying to hard reset the phone too,can anybody tell me which is the COMM button,i cant find it,thanks
Click to expand...
Click to collapse
Is yours a Prophet?
Should be right next to the volume slider....
My Treo 750 stops after first boot.
I am in a circle, because it looks like the on/off button is not working.
I can not do a hard reset because you have to hold also the on/off button.
I want update to WM 6 again via sd card. But the boot screen asking press on/off button to confirm.
Active sync is also not finding the Treo 750.
Should I change the keyboard or is the mainboard broken or could it be possible to skip the on/off button question somehow?
probably the keyboard membrane is not good. you can order on ebay for around $18 from a seller in Hong Kong. They seem to be the only people that have this item
Oke thanks, I could update the Treo 750 also by connected to the powerplug. The cradle was not giving the right signal for the update to go one. After a while, installing rom from a sd card, it will get a time out and will go one without to push the on/off button.
Download MTTY and do a "Task 2A" (without the qoutes) and flash any ROM you want.
Thanks good to know.
Hi, guys!
I 've just got a HTC Touch pro (O2 Xda diamond pro) from O2. I was not really satisfied with the branded Touch Flo 3d interface wherefore I tried to use the Diamond 3d Config Tool touchflo to put my device back to original HTC settings. But since these original UI was much slower than the O2 one(personal impression) I decided again to reset my device to use the stabdard O" branded Touch Flo 3d interface. Unfortunatelly when I change to keyboard mode I still see a HTC screen instead of the O2 screen.
Can you please help me on this?
I have also tried to hard reset my device, but foudn out that when I restart the device and press the VOLUME DONW and the ENTER key (on teh keyboard) the only thing that happens is that I see four color bars on the screen with some yellow numbers and text. THats all.
Please can you help me at least by telling me (maybe with photos) which buttons to use to hard reset and how the screen should look like? I have ofcourse checked the user guide, but I do not see the screen asking me whether I really want to do a hard reset (as described in the user guide).
Please help me on this!!!
Many thanks in advance!
Regards,
BBMG
Some would say RTFM or the Wiki before you post but I've been helped so many times here when I didn't deserve it I'll say volume down + enter + reset
Hi!
Yes, thanks for the tip, but I have ofcourse tried that and as I said there are just some color bars appear on the screen. BUt before they appear I see a message "No Image File!". SHould that mean, I cannot hard reset my devicè anyway?
Regards,
BBMG
Had same problem
Hi,
I had the same the same problem with my O2 xda diamond pro.
But I've solved it.
- turn on xda and wait ~ 2 min until all services run.
- press volume down
- press with a pencil with a soft tip on enter (round Button in center)
- hold everthing pressed (tricky)
- press reset button and wait until konfig screen aproache
- Follow messages
- Done
hold pencil with my mouth. Looks like circus act...
BBMG said:
I have also tried to hard reset my device, but foudn out that when I restart the device and press the VOLUME DONW and the ENTER key (on teh keyboard) the only thing that happens is that I see four color bars on the screen with some yellow numbers and text. THats all.
Click to expand...
Click to collapse
The enter key is the circular button under the screen, not the one on the keyboard
Still does not work
Many thanks for the tip. Yeah, it really looks like a circus act, but still does not work at all. First fo all I see a white screen (I assume that is the boot loader) saying "Loading ..." and short time after that I see a message "No Image File!". After that, I only see the following screen. Sorry for bad image quality. Took it with my old Nokia 6230i device.
Any tips?
Maybe there is someone who knows either from where to get an original O2 xda Diamond Pro image or how to setup the vertical screen that appears when the keyboard is open?
Text on the screen:
RAPH120
SPL-1.90.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
Serial
Many thanks in advance!
Regards
BBMG
Is there really noone who can help me out?
Hi,again!
Does anybody noticed the same problem as I have described above?
Please help me out guys!
Thanks in advance!
Regards
BBMG
You did read that the "enter" button is the round button on the front and not the "enter" button on the keyboard?
you entered bootloader, that mean you didnt hold the "enter" button (circular looking, when plugged in you see lights around it) at front of the phone, while holding vol down and press the reset button
BIG BIG Thanks
Hi, again!
You, were totally right. I was too stupid to recognize the round button as the enter button, although it was mentioned already before.
Now, my device is restored correctly.
Thank You!
hmmm
i kinda got the same problem but i pressed the Circle Button + Volume Down + Soft Reset
.. always if i do so it hangs at the T-Mobile screen
the bootloader with Volume Down + Soft Reset works fine
... any tips what i do wrong or what i could do now ?
and btw dont install Nydiot Virtual Desktop on your raph
I have this Palm treo 750 that is on boot loader only (with tri-color)
I don't know why this happendened, just one day I turn it on it just goes to this part and never goes to regular menu at all is just hang to tri-color only!
this is what it look like:
Pal Tr
IPL_0.20
Palm Tr
SPL-0.24.0000
Serial
and it has red color, green, blue, and white at the bottom.
Please kindly help needed badly, thank you
Please kindly help, I don't know what to do to make my cellphone work again!
try ti reset phone by pressing reset button with styles, next to card slot...if that don't work try to delete all data from your phone by holding ok button and then with your styles press reset (next to card slot)...and when ask you delete all data...say yes by pressing up button or yes or..you will see instruction on the screen... please report results here! ;-)
or maybe it's media button, lower button from the left side...maybe it's broken or something so it's pressed all the time...maybe that's the reason for enetring in bootloader-mode... try first to delete all data as I told you in previous post
eganzon79 said:
I have this Palm treo 750 that is on boot loader only (with tri-color)
I don't know why this happendened, just one day I turn it on it just goes to this part and never goes to regular menu at all is just hang to tri-color only!
this is what it look like:
Pal Tr
IPL_0.20
Palm Tr
SPL-0.24.0000
Serial
and it has red color, green, blue, and white at the bottom.
Please kindly help needed badly, thank you
Click to expand...
Click to collapse
try to clean the connector port on ur treo (better disassembly it before)......it works!
good luck!