Database Info

Brodit Diamond/MDA C4 car holder with 1800 mAh battery [pictures]

I purchased a 1800 mAh battery as per thread: http://forum.xda-developers.com/showthread.php?t=497159
But [knowingly] my Herbert Richter device specific holder would no longer fit because of the extra width of the battery.
So for information for others, I purchased the Brodit holder that gives the extra clearance at the back to accommodate my 1800 mAh battery. See pictures.
As I already had the HR vent clip (which I like), all I had to purchase was the Brodit holder itself and a 'Brodit/HR 4 prong adapter' that lets you interchange devices between the two manfacturers' mounts/holders.

nice, thanks for the pictures!

when using vent clips dont you run the risk of destroying the vent upon mount and dismount of the device?

A|ex said:
when using vent clips dont you run the risk of destroying the vent upon mount and dismount of the device?
Click to expand...
Click to collapse
Depends how well built (or not as the case may be) your vent is I guess. I've had vent clips on two Jaguars XJs, an Audi A6 and a Range Rover and after a good few years use, the vent still functioned correctly after removing the clip. For me they have be very secure and stable, even on fairly rough terrain.
I just dont like things sticking out from the windscreen; spoils the look of the vehicle interior in my opinion.
You can also get custom mounts (car specific) from Brodit, these are ok too but you'd have to get a new one if you changed your vehicle.

Car Dock for Droid Eris

Does anyone know of any for the Eris? Been looking with no luck.

I have not found any at local VZ stores or even fry's that would meet my needs, however I have been looking at this site
search android central on google...this has some nice docks you can use
I might end up buying from here.

I made mine. just bought a garmin one that was about the right size, and a clip on case for the eris, a little dremeling and a little epoxy and it stays up nicely.

What you can do is purchase another backplate for the phone and buy velcro and mount like that, but if changing plates all the time is too much of a pain here is a amazon search
http://www.amazon.com/s/ref=nb_sb_s...ris+car&ih=6_0_0_0_0_0_1_0_1_1.120_301&fsc=-1

dragon1018 said:
What you can do is purchase another backplate for the phone and buy velcro and mount like that, but if changing plates all the time is too much of a pain here is a amazon search
http://www.amazon.com/s/ref=nb_sb_s...ris+car&ih=6_0_0_0_0_0_1_0_1_1.120_301&fsc=-1
Click to expand...
Click to collapse
Nice to know I'm not the only Velcro-Jockey out there! I got a closeout "case-thing" from the Verizon store that only wraps around the sides, so it pops off quickly, and that's what my velcro is on.

I've been using the Scosche Universal Windshield and Vent Mount:
Can't post links , I bought it from Amazon though.
It's pretty adjustable, 90° rotation, flexible arm, fits a lot of different devices as well. I've had it for almost half a year now with no problems.

I use my innocase belt clip that came with my innocase II, and just built/bent a place to clip it to out of clothes hanger. Took a little work with the dremel to expose the charging jack and the headphone jack while it is mounted facing me, but works great!

I bought mine from walmart for $6. It's a vent mount I picked up in the automotive section.

ProClip(proclipusa dot com) has both powered and unpowered versions. Never tried one, but I've read good reviews on other boards. A little pricey as it's a two part system - a vehicle mount and a device adaptor. I'm thinking of trying the standard non-powered version for the Eris. Only concern is that it doesn't look like it will accomodate a protective case on the phone.
Another option is the "Universal" smart phone mount from Semsons(semsons dot com). I have dealt with them before for GPS and PDA stuff - no problems. I've got a universal PDA vent mount that I think was a freebie from them with a BT GPS purchase. I've used it for years - works OK with the Eris.

I got a universal vent dock that works for my Eris. U have a pretty nice setup as I also have a connection for hooking up cd players to a car's tapedeck. I no longer listen to the radio, and I gave up on CD's a long time ago.

custom dock
Im personally not a fan of vent docks or universals. I found a how to on lifehacker as to make a custom car dock. Granite its not like the moto droid with the magnet, but hell its much better than a universal windshield or vent mount.
Fact is you get any gps mount off ebay. I had an old magellan gps mount laying around. Average price for one off ebay is anywhere from $3-10
Grab a hard case off ebay. I picked one that had a belt clip on it for $2. Shipped.
I had to break the clip off and file it flush.
You can use Rearview mirror windshield mount sticker ,but I didnt have any so I just used standard epoxy. Im sure superglue will work.
Glue the hard plastic case onto the gps mount and your result will end like this.
Sorry for the crappy pics. Taken with my phone on KAOSFROYO 36 and camera works when it wants. Quailitys not that great but you get the picture.
Enjoy.

Car Mount Options

Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).

simon211175 said:
Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).
Click to expand...
Click to collapse
I just ordered this one. I have not received it yet, so I cannot tell you if it is good.
http://www.ebay.com/itm/360535350218?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

car mount
simon211175 said:
Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).
Click to expand...
Click to collapse
I'm using for 820 my previous original SGS2 car holder. Fits&works great, thou I had to adjust it a bit for the 3.5mm audio port. :good:

N!njaDuck said:
I just ordered this one. I have not received it yet, so I cannot tell you if it is good.
http://www.ebay.com/itm/360535350218?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
I like it!
I did have to use modify it to allow me to plug in a headset cable, but other than that... All good!

that's pretty much the same one I went with - works a treat

simon211175 said:
Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).
Click to expand...
Click to collapse
I prefer the Brodit holder. It works pretty fine.You can use all the options of your phone. You have different charging options. Watch out for Brodit and you should find everything you need.
Greetz
Oellie

Just waiting for this one.
http://www.nokia.com/global/products/accessory/cr-200/
Sent from jlanza_lumia820 (RM-825_eu_spain_377) using Board Express

Best car mount for the Nexus 4 (UK)?

Most of them are for smaller phones
I would prefer one that sticks to the windscreen like a satnav other than clipping onto the air vents
Well, I say best. I just need something basic, so cheap would be good BUT I'm hesitant to buy any non-branded cheap Chinese products from eBay in case they're really bad (don't want my N4 to drop and crack)
Cheers

I really like the iOttie 1 touch mount. 1 handed phone mount/dismount and the suction cup is ridiculously strong.

Andrew025 said:
I really like the iOttie 1 touch mount. 1 handed phone mount/dismount and the suction cup is ridiculously strong.
Click to expand...
Click to collapse
Agree, it's been outstanding. Sticks to any flat surface.

Capdase Car Mount Holder for LG Nexus 4 is not bad.

I use the one for the Galaxy S3 here. It is rock solid and is adjustable.
I only paid £10.95 from Amazon tho'

I bought one of these a couple of weeks ago: http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It's not the cheapest (£17.95!!) but it was well worth the money. I've had various naff quality ones that don't stick, look cheap or fall to bits. This one looks better than in the pics, looks good when the phone is in or out, sticks brilliantly (I've tried just on the dashboard and on the windscreen!). I know there's other alternatives that offer charging etc but for just a decent holder this one is better than anything I've had (and I've tried a LOT).

thunderstorm654 said:
I bought one of these a couple of weeks ago: http://www.mobilefun.co.uk/supergrip-universal-case-compatible-car-mount-p30552.htm
It's not the cheapest (£17.95!!) but it was well worth the money. I've had various naff quality ones that don't stick, look cheap or fall to bits. This one looks better than in the pics, looks good when the phone is in or out, sticks brilliantly (I've tried just on the dashboard and on the windscreen!). I know there's other alternatives that offer charging etc but for just a decent holder this one is better than anything I've had (and I've tried a LOT).
Click to expand...
Click to collapse
I use the same mount and it works brilliantly, tried plenty of others too, but it is the only one which doesn't wobble about/swivel or fall off on its own. Well worth trying. You can also find a few cheaper versions for around £5-6 on Amazon which look nearly identical, although I guess it is a bit of a gamble as far as quality goes then.

Thanks for the suggestions guys, do you all mount it on the windshield or find mounting it on the dash/vents is better?
http://www.team-bhp.com/forum/attac...ande-punto-test-drive-review-fiatpuntoilg.jpg
that's my dash (pic from google) so I was thinking maybe sticking it to the dash above the central air vents. how would I stick it to this? adhesive?

If you get the one I mentioned, it'll stick directly to the dash with the suction cup.
With some other mounts you have to mount a plastic disk (using double sided tape) so they suction has a smooth flat surface.

Whats the sticky gel on the 4th mobilefun picture? does it leave a residual on what you stick it on and does it get less sticky over time?

I wonder if anyone could suggest good airvent/grill car mount as I hate obstructing the windscreen. It should be low profile and be able to rotate in all directions. Maybe even universal as i still have HTC desire and use it from time to time as ive got different simcard in that. Tried looking for some but most are either in China or in USA and the ones I saw that I would like do not ship to UK.
Any suggestions? Thank you.
Sent from my Nexus 4 using xda app-developers app

I love my brodit system, perfect car dock imo. Bit pricey, but very robust.

Nokia CR-115 Universal Holder
Needs the rubber in the jaws trimming slightly to fit the N4 but otherwise a great quality mount and v cheap.
Sent from my Nexus 4 using Tapatalk 2

I received the Haicom car holder for my N4 a couple of days ago (with a vent mount) and it fits really well.
I got the base on Amazon and the vent mount on eBay.
Sent from my Nexus 4 using xda premium

Having tried many over the years Brodit do the best holders IMHO. The adjustable iphone4 holder is a fantastic fit on the nexus 4 and u can adjust it to whatever case or bumper you have for a perfect fit. Mounting option is dependant on your car and though pricey the upshot is if you change car or phone you only have to replace half of your holder rather than the whole thing.

I bought this: http://www.ebay.com/itm/Exogear-Exo...Phone-5-Android-Phone-GPS-Black-/130782407854
I've been very happy with it and it sticks perfectly on my car (VW Golf IV Variant 2001) dashboard which isn't too smooth and a normal suction cup would't attach to it but exomount would.

I use the $10 GripGo.. No issues at all, cheapest one I've found, and works as well as any other I've had. Yet it works with any device!

Ram mounts...
I've ran Ram Mounts for years, started with GPSr mounts, now I run a double mount, holds both my GPSr and cell phone on the dash. It's a modular system. Get the cradle you need, the mount type you want, and whatever arms you need to connect the two.. I use the same cradle for my GPSr units in my truck, on the bike, on the quads, all i do is mode the cradle and arm from place to place... But it can get pricey, depending on how complex a setup you run... But on the same now, you can get parts to rig up everything from a cell phone/GPSr up to laptop computers....
the Ram X-Grip I'm currently using does have a habit of adjusting the volume if the phone is centered in the bracket, but it's easy enough to offset the phone slightly. I've used the same cradle for my last 3 phones.
I'm currently in the process of mating a google orb to the xgrip to provide wireless charging in my truck without having to worry about the phone sliding or falling...

What is the best car mount for the M9?

Does anyone know if the M9 will fit the official HTC M8 car holder?
It would be great if someone with a test model could give this a try.
I am going to sell my m8 and would be great if I can let people know if I'll be selling it with or without the car holder as I have the official m8 car holder.
The dimensions seem almost the same but since the m9 is ever so slightly smaller from it might be too loose a fit in the car holder.
Anyone able to try this for me?
Massive thanks.

I think the power botton ist a problem. The car holder case from m8 would be in conflict with the botton on the side of the m9

Will there be a official car holder for the m9?
I use my m7 with the HTC car holder and want to by a m9 and a m9-car-holder. All original accessories I found in the www was Covers and so, but not a car holder.

There is a universal Holder official from HTC available in Europa now http://www.htc.com/de/accessories/#!pid=htc-one-m9&acc=htc-car
I got my m9 now, and I tried it with the m8 car holder, and it doesn't fit!
The power botton is not the problem, but the case is a little bit too small and the connector is not 100% at the right place

Fetz Braun said:
There is a universal Holder official from HTC available in Europa now http://www.htc.com/de/accessories/#!pid=htc-one-m9&acc=htc-car
I got my m9 now, and I tried it with the m8 car holder, and it doesn't fit!
The power botton is not the problem, but the case is a little bit too small and the connector is not 100% at the right place
Click to expand...
Click to collapse
Well that sucks.. So we have to disk out for yet another car holder and probably wait another couple of weeks/months..
Thanks for letting me know though.
**********
Sent from a tin of baked beans using some chewing gum, tinfoil, a piece of string and a manual written by MacGyver

yes I think so this power botton ist a problem. The car holder case from m8 would be in conflict with the botton on the side of the m9

I've got one of these since having my M7
http://www.mobilefun.co.uk/olixar-omniholder-universal-case-compatible-in-car-mount-p28920.htm
Disappointed that the dot view flip case doesn't go well in it as its too tight and squashes the hinge and I worry it'll dammage the case...

Is there a best one for the m9?
Or a offical one?

I use the ProClip system in my cars and I have adjustable phone mounts . Even works with a case. I have used this part for my M7 with UAG case, M8 with UAG case and It should work just fine for my new M9. There are 2 set screws you need to adjust.
ProClip is not for everyone as they are pricey for the vehicle specific mount and the phone holder. I have one of these in all 3 of my cars.
http://www.proclipusa.com/phone-hol...with-a-case-246827-19637.cmsv?p_leftorright=0

Mike02z said:
I use the ProClip system in my cars and I have adjustable phone mounts . Even works with a case. I have used this part for my M7 with UAG case, M8 with UAG case and It should work just fine for my new M9. There are 2 set screws you need to adjust.
ProClip is not for everyone as they are pricey for the vehicle specific mount and the phone holder. I have one of these in all 3 of my cars.
Click to expand...
Click to collapse
I looked at that model, but it would seem that there is no padding? So do you think that it can scratch M9 if used without case?

At the moment I am using a Montar grip, http://www.amazon.co.uk/Universal-S...d=1428490011&sr=8-1&keywords=montar+car+mount
I have to say I am very impressed with it as a grip.
It's the only one I found so far that I can mount on my dash, which does not have a smooth surface.
It feels very sturdy and I am quite happy with it holding my precious m9
Made me think twice whether I want to invest in an official and very expensive htc mount again...

I picked up a ram mount x-grip recently after trying several other generic universal phone holders over the years. I wish I would have found this sooner, its excellent. Great build quality, exceptional stability and holding strength.
http://www.amazon.com/Ram-Mount-Suction-Universal-X-Grip/dp/B0066BWMNU

Kenu Airframe+ is my favorite by long shot.

MOROx2 said:
I looked at that model, but it would seem that there is no padding? So do you think that it can scratch M9 if used without case?
Click to expand...
Click to collapse
I use the same ProClip for M8 and it will not scratch it.

jkcarp94 said:
Kenu Airframe+ is my favorite by long shot.
Click to expand...
Click to collapse
I had one of these and no longer use it. After a few uses, it would not stay attached to my vent when trying to remove my phone. The whole thing kept coming off the vent. Nice design but not practical for my use.

i havent gotten my m9 yet but ive been using a magnetic mount from Mountek for a few years with my Nexus and OnePlus phones. It's great and universal. Just need to put a magnet between your phone and the case (if you use a case) or attach the magnet to the back (I don't do this). The nice thing about the Nexus 5 I had was that since it had Qi charging, it already had built-in magnets so I didnt even need to magnetic disc it came with.

Mike02z said:
I had one of these and no longer use it. After a few uses, it would not stay attached to my vent when trying to remove my phone. The whole thing kept coming off the vent. Nice design but not practical for my use.
Click to expand...
Click to collapse
Were you using two hands to remove the phone? One on the Airframe and one on the phone?

jeeptrash said:
I picked up a ram mount x-grip recently after trying several other generic universal phone holders over the years. I wish I would have found this sooner, its excellent. Great build quality, exceptional stability and holding strength.
http://www.amazon.com/Ram-Mount-Suction-Universal-X-Grip/dp/B0066BWMNU
Click to expand...
Click to collapse
+1 for Ram Mounts X-Grip. I have what they're now calling their, "phablet" model.
Tired of having to find a new mount each time you get a new phone?
I have used the same X-Grip on my HTC One M7, M8, and now M9. It can even hold my Nexus 7. This may be the last phone mount I ever buy.

I use the NightIze Steelie mount kit, since I HATE clips and brackets (after going through several car mount setups with them)and anything involving more than 1 hand operation (or take too long). Just stick it and go (well...and plug it in to the USB cable for charging).
The mount on the back of my phone does not and has never caused any issues with either my Galaxy S4 (prvious phone) or M9 (current phone), both of which use(d) the same setup. In fact , having a magnet on the back of my phone has been handy in a few cases (like working on something that requires 2 hands and reading directions/watching instructional video on phone). Magnet is pretty strong, so no issues with it falling off mount over bumps or when I go offroad (I have a truck), but a pretty significant jolt (say...moderate a collision with another solid object or falling into a large hole)) would probably dismount it.
Only downsides is I have to be careful not to place the magnet near/on anything that can get damaged by magnets (e.g. credit cards, etc), which has proven to me a non-issue since my wallet and my phone are always pretty far apart (and rarely are both out at the same time).
That said, since I didn't want anything sticking up off my phone, I drilled a hole into my UAG case (for both) for the round phone mount, so its almost flush with the case itself (I put the phone mount in the middle, so I could rotate between portrait/landscape with ease).
So far its been the best solution FOR ME, YMMV: http://www.niteize.com/product/Steelie-Car-Mount-Kit.asp

The Steelie one looks pretty cool.
I want to mount it on my dashboard. Any other good ones for the M9?