Car Mount Options - Nokia Lumia 820

Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).

simon211175 said:
Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).
Click to expand...
Click to collapse
I just ordered this one. I have not received it yet, so I cannot tell you if it is good.
http://www.ebay.com/itm/360535350218?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

car mount
simon211175 said:
Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).
Click to expand...
Click to collapse
I'm using for 820 my previous original SGS2 car holder. Fits&works great, thou I had to adjust it a bit for the 3.5mm audio port. :good:

N!njaDuck said:
I just ordered this one. I have not received it yet, so I cannot tell you if it is good.
http://www.ebay.com/itm/360535350218?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
I like it!
I did have to use modify it to allow me to plug in a headset cable, but other than that... All good!

that's pretty much the same one I went with - works a treat

simon211175 said:
Hi all.
Got me a shiny new 820 on Monday. Happy days.
Does anyone have any opinions on a good car holder? I can't see any made by Nokia, which leaves either a cheap "universal" one which I don't have much faith in, or a Brodit one (which would be fine, except I then need a suction bit to hold it in my car as the Brodit clip puts it in a stupid place).
Click to expand...
Click to collapse
I prefer the Brodit holder. It works pretty fine.You can use all the options of your phone. You have different charging options. Watch out for Brodit and you should find everything you need.
Greetz
Oellie

Just waiting for this one.
http://www.nokia.com/global/products/accessory/cr-200/
Sent from jlanza_lumia820 (RM-825_eu_spain_377) using Board Express

Related

VERY high quality car mount

I just got this delivered from eBay.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170452970240&ssPageName=STRK:MEWAX:IT
It is the ONLY car mount I've ever owned that doesn't move.
It is rock solid.
What's nice is the rotation by pushing the button so it is completely flexible by any degree.
Comes with a good car charger as well, seems to be able to push enough power to still charge my Nexus even when running loads of apps like music and maps...etc.
My current charger can't do that.
WELL WORTH THE MONEY.
Contains:
1 X Premium Car Holder for Samsung HTC Nexus One
1 X In Car Charger for Samsung HTC Nexus One
xD Sorry, haha what an interesting typo..
Any mention of a USA-based seller? I'd like to give it a try..
Don't see it for sale by a US seller.
Lovely bit of kit though.
It's so stable you could read an ebook while driving.
I'm over in California on June 25th for a week for work.... ;-)
Looks pretty good, been after something more than just a cheap universal mount.
r2001uk said:
Looks pretty good, been after something more than just a cheap universal mount.
Click to expand...
Click to collapse
Why not get the official HTC/Google Nexus One car dock? They do a desktop one too.
Get them from http://www.google.com/phone
joeearl13 said:
Why not get the official HTC/Google Nexus One car dock? They do a desktop one too.
Get them from http://www.google.com/phone
Click to expand...
Click to collapse
Because the car dock alone is $55 plus shipping.
I mean really, £45 for a car mount? no thanks.
I've just ordered a USB desk mount, with spare battery charging and spare battery for £15.
Amdathlonuk said:
Because the car dock alone is $55 plus shipping.
I mean really, £45 for a car mount? no thanks.
I've just ordered a USB desk mount, with spare battery charging and spare battery for £15.
Click to expand...
Click to collapse
Yah but it does have Bluetooth Speakers in it that make it far louder then the normal speakers. I really like the car dock I know its 55 bucks but it is very nice.
I bought the same holder as the OP and i find it incredibly annoying and pretty cheaply made. It doesn't seem to stay where i want it to and it seems to have warped slightly in the sun so my nexus doesn't fit properly anymore.
I could have just got a dud one, but you might want to watch out for that
Meltus said:
I bought the same holder as the OP and i find it incredibly annoying and pretty cheaply made. It doesn't seem to stay where i want it to and it seems to have warped slightly in the sun so my nexus doesn't fit properly anymore.
I could have just got a dud one, but you might want to watch out for that
Click to expand...
Click to collapse
That's dissapointing to hear.
I can say that when mine is on the windscreen it will NOT move.
Rock solid, and no bouce or shake what-so-ever.
I'm thinking you MAY have got a dud one or I got a rare good one?
I think at £10 it's worth a go.
I might pick up a few Google ones while over in the US next month as I won't have to pay for shipping.
Buy the original. WAY much better...
I always pay between £30 - £50 for a brodit active mount, specific mount made for my car, not a suction cup.... charges well, always well made and secure.
I think this is a car mount from Haicom! You can't find it on the manufactur's website, but Google shows some results.
I bought a Haicom car mount for my G1 a few month a ago. Just after a few days the arm for the vacuum cup loosed from the mount. This thing is anything but high quality!
trinode said:
I always pay between £30 - £50 for a brodit active mount, specific mount made for my car, not a suction cup.... charges well, always well made and secure.
Click to expand...
Click to collapse
mine comes from fedex this morning! well my brodit car mount system. i didnt opt for the charging version. I have my nexus one in a hard case, so I opted for the universal/resizeable version.
I also bought a nice car charger from boxwave to go with the new proclip car mount (only vendor i could find with the microUSB coil + slim charger profile):
http://www.boxwave.com/products/microcarcharger/nexus-one-micro-car-charger_3770.htm
If you live in the UK Expansys have started selling Nexus One accessories (although I can only find the Desktop Dock atm) http://www.expansys.com/d.aspx?i=195715
Also while browsing through I found Motorola Milestone for a pretty decent £350 http://www.expansys.com/d.aspx?i=190234
Amdathlonuk said:
That's dissapointing to hear.
I can say that when mine is on the windscreen it will NOT move.
Rock solid, and no bouce or shake what-so-ever.
I'm thinking you MAY have got a dud one or I got a rare good one?
I think at £10 it's worth a go.
I might pick up a few Google ones while over in the US next month as I won't have to pay for shipping.
Click to expand...
Click to collapse
Yeah, for the first few days it was fantastic.
Didn't bounce or shake and could read the screen clear as anything (had a different one that was just a blurry mess) but then the button-catch started slipping and then the holder sort of melted a bit in the sun lol.
But yeah, i guess i just got a dud one or something if yours is working so well
I just hope it doesn't do what mine did lol
I have one of the same mounts you bought from Ebay. I also am very impressed by the quality of it. Really secure and the suction mechanism is great.
I was dubious when I bought it but thought it was still better to take a punt than shell out for the OEM model.
Having said that, now that I have been made aware of brodit mounts, I think they look really nice and top quality. If this one breaks or deteriorates, I may be tempted to them. I do slightly prefer positioning on the windscreen, but the brodit mounts seem fantastic.
Mine is fairly good
I have the same one, a bargain at £10. The only issue i have had is that the suction lever got loose after about 3 remounts.. Fortunately the holder is still quite strong in place, but I do worry that the sucker wont last long.. So far so good though..
On the plus side, the form factor is very pleasing to the eye, and the flexibility of the joints are very good also..
Sorry to drag up an old thread but i thought i'd update you all a little.
I went to the lake district for a week and did a fair amount of driving. I was playing around alot with the positioning, trying to find the best location.
Basically, by the end of the week the level became really loose and the suction cup wont stick to anything anymore. No dust 'stuck' to it or anything, as far as i can tell, it just looks a little misshapen and refuses to adhere to any part of the windscreen.
I'm not trying to put you off it or anything, just be careful you don't get a 'dud' one like me

Car Docks?

Has anyone seen a car dock available yet? I'm coming in from a long line of WinMo phones from the Tilt2 all the way back and even on Ebay I've been able to find SOMETHING. So far either for the DesireHD or the Inspire it's a little barren. Anyone seen anything useful? I don't need speakerphone or anything like that, just charging.
I installed this under the driver's seat for my tilt2 and now use it with the inspire.
http://www.amazon.com/Arkon-IPM525-S-Flexible-Gooseneck-Slim-Grip/dp/B0042FZ9KK/ref=pd_cp_cps_3_img
Sent from my Inspire 4G using XDA App
I just bought a universal pda holder and suctioncup mount from ram-mount.com. Gonna use the stock usb cable and a universal usb cig plug.
Monoprice
This is what I'm using:
http://www.monoprice.com/products/p...=10840&cs_id=1084001&p_id=5272&seq=1&format=2
Currently less than $4.00
its not cheap but its official htc car dock for the desire hd so it will work with our phones. im going to order one soon.
http://www.expansys-usa.com/htc-desire-hd-car-upgrade-kit-cu-s440-205737/
From Ebay
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150547608146&ssPageName=ADME:L:OU:US:1123
I bought it, didn't look like a generic PDA car holder like you usually find, it was made specifically to fit the Desire HD. And for 5 bucks with free shipping...
boostedneonsrt4 said:
its not cheap but its official htc car dock for the desire hd so it will work with our phones. im going to order one soon.
http://www.expansys-usa.com/htc-desire-hd-car-upgrade-kit-cu-s440-205737/
Click to expand...
Click to collapse
Let us know how his works when you get it. I don't think it is an official HTC doc as I cannot find it on their website. I am interested in the "special cord" that enables the car doc...is this the same thing as the N1? Maybe this does not work on the I4G
It's not on the HTC America site. I found it here http://www.htcaccessorystore.com/sk/p_htc_item.aspx?i=205737
Sent from my Desire HD using XDA App
I bought this one. Haven't had a chance to really use it but the suction cup seems really strong and it holds the phone great.
http://www.amazon.com/gp/product/B003ELOOZO
So today I got the mount I posted in a previous post as well as a silicone skin that ordered from the same guy on eBay. Generally when you buy something so cheap from China you expect it's crap and it'll go in the trash the moment you get them, but believe it or not both are pretty good, especially the skin. I got them together for $8.50, arived only a week after shipping, and he even through in a free screen protector.
Graded
Skin - A.
Pros
Great quality, really helps with the slick feeling of the phone. Fits like a glove.
Cons
It makes the unlock and volume buttons even harder to press but not too hard.
Mount - B.
Pros
Fits the phone exactly, pretty stable for plastic. Easy to assemble
Cons
Would have been nicer if it was metal, wish it could fit the phone with the skin. Took me a bit to figure out how it worked since it didn't come with any instructions.
Doc with Bluetooth speaker phone
has anyone tired this one?
http://www.parrot.com/usa/products/plugnplaycarkits
Looks like it is good with the build in speaker phone
I think I'm gonna pick up the under the seat mount. It gets too cold for a suction cup type up here in Manitoba, Canada..when it gets below -40 on my car thermometer, it falls right off LOL
I Googled a case for my Inspire and ended up with a car holder that has power jack and mini audio jack with a cable for cig lighter and aux in on my car deck that mounts on the dash,a leather case and a car and house charger ,all 4 items for 15.99 with shipping in my mailbox in two days,just make sure its a US company ,the Hong Kong vendors shipping takes 10-15 days,Vegas
Sent from my Desire HD using XDA App
Vegaslightsss said:
I Googled a case for my Inspire and ended up with a car holder that has power jack and mini audio jack with a cable for cig lighter and aux in on my car deck that mounts on the dash,a leather case and a car and house charger ,all 4 items for 15.99 with shipping in my mailbox in two days,just make sure its a US company ,the Hong Kong vendors shipping takes 10-15 days,Vegas
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Can you please post a link? Thanks!
http://www.proclipusa.com/
I have used these guys on a few cars and phones. They have very nice equipoment and will work with just about every car or phone.
http://www.arkon.com/slimgrip/inspire_4g_car_mount.html
This thing looks so awesome, decent price too.
texas-saluki said:
has anyone tired this one?
http://www.parrot.com/usa/products/plugnplaycarkits
Looks like it is good with the build in speaker phone
Click to expand...
Click to collapse
I tried several plug-and-play kits before and never had good luck. I finally broke down and bought arrot MKI 9100 which along with a harness for my vehicle cost ~$200 at crutchfield. The install took about an hour and I am one happy camper
I bought this is a FM transmitter car charger it works but in bumpy roads or when i twist it in a sertain way it loses signal to my stereo i just twist it around and it works again but this problem almost never happens.
It does not Say its for the Inspire but if that cellphone has a screen as big as this one it will fit
http://item.mobileweb.ebay.com/viewitem?itemId=370495027694&index=0&nav=SEARCH&nid=68714661154
Sent from my HTC Inspire 4G using The XDA app
I'm currently using Mountek CD slot mount.
I've tried pretty much every type of mount and this is the best IMO:
- No bouncing whatsoever.
- Puts the phone in optimal position on the center console
- No need for suction cup or double side tape on dash
- Portable. Came in handy during a recent vacation.
- $20
Mountek
Dacian said:
So today I got the mount I posted in a previous post as well as a silicone skin that ordered from the same guy on eBay. Generally when you buy something so cheap from China you expect it's crap and it'll go in the trash the moment you get them, but believe it or not both are pretty good, especially the skin. I got them together for $8.50, arived only a week after shipping, and he even through in a free screen protector.
Graded
Skin - A.
Pros
Great quality, really helps with the slick feeling of the phone. Fits like a glove.
Cons
It makes the unlock and volume buttons even harder to press but not too hard.
Mount - B.
Pros
Fits the phone exactly, pretty stable for plastic. Easy to assemble
Cons
Would have been nicer if it was metal, wish it could fit the phone with the skin. Took me a bit to figure out how it worked since it didn't come with any instructions.
Click to expand...
Click to collapse
I actually bought the same exact mount from another site it was like a dollar more but I bought a few other things so it worked out to about the same price and all from one place. I love the design of it and I drive a 2007 Focus so the vents are in the PERFECT spot for this. I hate suction cup mounts with a passion because I'm really anal about my window being clean lol. What's nice about this particular mount too is the fact that they sell different mounts that simply just swap the phone holder. They sell bike mounts, suction cups, and more on the site I picked it up from.
The site
Holder
Mount
*edit* Just realized that the site is sold out of the vent mount at the moment.

Finally! Brodit holder available soon :)

Brodit.com
Could do with an active one, but passive will do for now
Seems like ages from announcement to going on sale, but I finally got it today from mobilefun.co.uk and have just fitted it in the car.
Usual Brodit quality, and a fit like a glove perfect fit. Well pleased
Sent from my HTC One S using Tapatalk 2
they also have a active loader, look:
http://www.brodit.com/product.html?id=513386&pn=prod&brand=HTC&model=One S Z520e
The active with cig-plug looks great:
http://www.brodit.com/product.html?id=512386&pn=prod&brand=HTC&model=One S Z520e
but how do you actually buy the thing?
I got my passive one from www.mobilefun.co.uk
Had an active one with my desire, top quality kit.
Sent from my HTC One S
Looking forward to this mount, looks great. Just waiting for it to be in stock.
Got the Active Holder for my wife's One S and I'm very disappointed with the usb fit, not quite aligned and it takes a bit of coaxing to get the phone connected.
I've got the active holder for my HTC HD2 and that was perfect slide in and fit, but the Active holder for the One S is not good in my opinion.
I still use the Brodit one designed to work with the mytouch 4g (back when I had one). It fits my Sensation.. my Amaze... and now my One S just fine! LOL
I yesterday received my brodit htc one S active charger with cig.
As it seems now, the powerconnector is not aligned to the phone correctly. I need to pull the phone towards me for approximately 1 mm to be able to slide the phone in place.
I am a bit unhappy with it. I contacted brodit about it and asked them what they advice me to do. Send it back as DOA or let me execute a trick/fix of somesort.. whatever..
Ill let you know what comes out of it.
Regards.
Got my brodit holder today, it takes a long time to get the usb to line up. Is there something inherently wrong with our phones usb port? Something to do with the unibody frame? I'm thinking of returning it, because it's not convenient to have to spend 3 minutes lining up the phone perfectly to fit in the charger.
Especially when you spend at least $60 dollars for it !!! LOL
Heat Gun on Brodit
I used a heat gun on my Brodit holder for the Nexus-S and it now fits my HTC One S w/case perfectly
Chromosome_8 said:
I used a heat gun on my Brodit holder for the Nexus-S and it now fits my HTC One S w/case perfectly
Click to expand...
Click to collapse
Sounds interesting, do you have pictures of it?
Who used the HTC HC-C740 hardcase in combination with the Brodit active holder? And did it fit?
I can confirm the Brodit holder in combination with the HTC HC-C740 hardcase does fit, but not very easy. Also without the case the Brodit holder doesn't work nicely. I will return it and look for an alternative..
Does the active holder automatically enable car mode like the HTC official car dock?
that indeed looks nice!
Just to give you all an update with my active brodit experience.
I had the 'not perfectly lined out power connector" issue, like some others said.
Now, it seems to be getting better and better. I get the feel there is some rubber badding around the connector which is memorizing the correct position more and more.
It is probably not SUCH a big fuzz for most people I guess. Im getting used to it.
Even when its dark I have the One S in place with one hand. Takes me up to 5 seconds.
So, Now after a while, I can say Im pretty happy with it.
Regards.
-------------------------------------------------------------
Currently using:
HTC One S gray (unrooted still - stock)
Samsung Galaxy Tab 10.1 (rooted-stock)
Old:
HTC Desire
HTC Diamond
E-TEN G500
edterbak said:
Just to give you all an update with my active brodit experience.
I had the 'not perfectly lined out power connector" issue, like some others said.
Now, it seems to be getting better and better. I get the feel there is some rubber badding around the connector which is memorizing the correct position more and more.
It is probably not SUCH a big fuzz for most people I guess. Im getting used to it.
Even when its dark I have the One S in place with one hand. Takes me up to 5 seconds.
So, Now after a while, I can say Im pretty happy with it.
Regards.
-------------------------------------------------------------
Currently using:
HTC One S gray (unrooted still - stock)
Samsung Galaxy Tab 10.1 (rooted-stock)
Old:
HTC Desire
HTC Diamond
E-TEN G500
Click to expand...
Click to collapse
Thing is, Brodit holders that I owned until now are 100% perfect. This one isn't. I returned it yesterday because it just didn't did the job and I paid almost 50 euros for it. I would expect a better product, just like I was used to...

What is the best car mount for the M9?

Does anyone know if the M9 will fit the official HTC M8 car holder?
It would be great if someone with a test model could give this a try.
I am going to sell my m8 and would be great if I can let people know if I'll be selling it with or without the car holder as I have the official m8 car holder.
The dimensions seem almost the same but since the m9 is ever so slightly smaller from it might be too loose a fit in the car holder.
Anyone able to try this for me?
Massive thanks.
I think the power botton ist a problem. The car holder case from m8 would be in conflict with the botton on the side of the m9
Will there be a official car holder for the m9?
I use my m7 with the HTC car holder and want to by a m9 and a m9-car-holder. All original accessories I found in the www was Covers and so, but not a car holder.
There is a universal Holder official from HTC available in Europa now http://www.htc.com/de/accessories/#!pid=htc-one-m9&acc=htc-car
I got my m9 now, and I tried it with the m8 car holder, and it doesn't fit!
The power botton is not the problem, but the case is a little bit too small and the connector is not 100% at the right place
Fetz Braun said:
There is a universal Holder official from HTC available in Europa now http://www.htc.com/de/accessories/#!pid=htc-one-m9&acc=htc-car
I got my m9 now, and I tried it with the m8 car holder, and it doesn't fit!
The power botton is not the problem, but the case is a little bit too small and the connector is not 100% at the right place
Click to expand...
Click to collapse
Well that sucks.. So we have to disk out for yet another car holder and probably wait another couple of weeks/months..
Thanks for letting me know though.
**********
Sent from a tin of baked beans using some chewing gum, tinfoil, a piece of string and a manual written by MacGyver
yes I think so this power botton ist a problem. The car holder case from m8 would be in conflict with the botton on the side of the m9
I've got one of these since having my M7
http://www.mobilefun.co.uk/olixar-omniholder-universal-case-compatible-in-car-mount-p28920.htm
Disappointed that the dot view flip case doesn't go well in it as its too tight and squashes the hinge and I worry it'll dammage the case...
Is there a best one for the m9?
Or a offical one?
I use the ProClip system in my cars and I have adjustable phone mounts . Even works with a case. I have used this part for my M7 with UAG case, M8 with UAG case and It should work just fine for my new M9. There are 2 set screws you need to adjust.
ProClip is not for everyone as they are pricey for the vehicle specific mount and the phone holder. I have one of these in all 3 of my cars.
http://www.proclipusa.com/phone-hol...with-a-case-246827-19637.cmsv?p_leftorright=0
Mike02z said:
I use the ProClip system in my cars and I have adjustable phone mounts . Even works with a case. I have used this part for my M7 with UAG case, M8 with UAG case and It should work just fine for my new M9. There are 2 set screws you need to adjust.
ProClip is not for everyone as they are pricey for the vehicle specific mount and the phone holder. I have one of these in all 3 of my cars.
Click to expand...
Click to collapse
I looked at that model, but it would seem that there is no padding? So do you think that it can scratch M9 if used without case?
At the moment I am using a Montar grip, http://www.amazon.co.uk/Universal-S...d=1428490011&sr=8-1&keywords=montar+car+mount
I have to say I am very impressed with it as a grip.
It's the only one I found so far that I can mount on my dash, which does not have a smooth surface.
It feels very sturdy and I am quite happy with it holding my precious m9
Made me think twice whether I want to invest in an official and very expensive htc mount again...
I picked up a ram mount x-grip recently after trying several other generic universal phone holders over the years. I wish I would have found this sooner, its excellent. Great build quality, exceptional stability and holding strength.
http://www.amazon.com/Ram-Mount-Suction-Universal-X-Grip/dp/B0066BWMNU
Kenu Airframe+ is my favorite by long shot.
MOROx2 said:
I looked at that model, but it would seem that there is no padding? So do you think that it can scratch M9 if used without case?
Click to expand...
Click to collapse
I use the same ProClip for M8 and it will not scratch it.
jkcarp94 said:
Kenu Airframe+ is my favorite by long shot.
Click to expand...
Click to collapse
I had one of these and no longer use it. After a few uses, it would not stay attached to my vent when trying to remove my phone. The whole thing kept coming off the vent. Nice design but not practical for my use.
i havent gotten my m9 yet but ive been using a magnetic mount from Mountek for a few years with my Nexus and OnePlus phones. It's great and universal. Just need to put a magnet between your phone and the case (if you use a case) or attach the magnet to the back (I don't do this). The nice thing about the Nexus 5 I had was that since it had Qi charging, it already had built-in magnets so I didnt even need to magnetic disc it came with.
Mike02z said:
I had one of these and no longer use it. After a few uses, it would not stay attached to my vent when trying to remove my phone. The whole thing kept coming off the vent. Nice design but not practical for my use.
Click to expand...
Click to collapse
Were you using two hands to remove the phone? One on the Airframe and one on the phone?
jeeptrash said:
I picked up a ram mount x-grip recently after trying several other generic universal phone holders over the years. I wish I would have found this sooner, its excellent. Great build quality, exceptional stability and holding strength.
http://www.amazon.com/Ram-Mount-Suction-Universal-X-Grip/dp/B0066BWMNU
Click to expand...
Click to collapse
+1 for Ram Mounts X-Grip. I have what they're now calling their, "phablet" model.
Tired of having to find a new mount each time you get a new phone?
I have used the same X-Grip on my HTC One M7, M8, and now M9. It can even hold my Nexus 7. This may be the last phone mount I ever buy.
I use the NightIze Steelie mount kit, since I HATE clips and brackets (after going through several car mount setups with them)and anything involving more than 1 hand operation (or take too long). Just stick it and go (well...and plug it in to the USB cable for charging).
The mount on the back of my phone does not and has never caused any issues with either my Galaxy S4 (prvious phone) or M9 (current phone), both of which use(d) the same setup. In fact , having a magnet on the back of my phone has been handy in a few cases (like working on something that requires 2 hands and reading directions/watching instructional video on phone). Magnet is pretty strong, so no issues with it falling off mount over bumps or when I go offroad (I have a truck), but a pretty significant jolt (say...moderate a collision with another solid object or falling into a large hole)) would probably dismount it.
Only downsides is I have to be careful not to place the magnet near/on anything that can get damaged by magnets (e.g. credit cards, etc), which has proven to me a non-issue since my wallet and my phone are always pretty far apart (and rarely are both out at the same time).
That said, since I didn't want anything sticking up off my phone, I drilled a hole into my UAG case (for both) for the round phone mount, so its almost flush with the case itself (I put the phone mount in the middle, so I could rotate between portrait/landscape with ease).
So far its been the best solution FOR ME, YMMV: http://www.niteize.com/product/Steelie-Car-Mount-Kit.asp
The Steelie one looks pretty cool.
I want to mount it on my dashboard. Any other good ones for the M9?

Car Mount recommendations please

I'm looking for a couple of mounts I can use in our cars. I would like universal ones that both me and my wife can use (she's just inherited my G3).
I like the idea of the magnet ones like this Look at this on eBay http://www.ebay.co.uk/itm/291750206879 but I don't know how good they are.
Thanks
TylerDurdenK said:
I'm looking for a couple of mounts I can use in our cars. I would like universal ones that both me and my wife can use (she's just inherited my G3).
I like the idea of the magnet ones like this Look at this on eBay http://www.ebay.co.uk/itm/291750206879 but I don't know how good they are.
Thanks
Click to expand...
Click to collapse
i wouldnt rely that much on magnet ones. Unless you have a very thin cover (which i also dont recommend). If you have to break all of the sudden it falls. I personally use this type of Universal mounts:
http://www.ebay.com/itm/Liger-Unive...134995?hash=item3f64350153:g:6dUAAOSw1DtXJAlt
But mine is black completely.
It allows you to charge the device at without compromising position, it also allows you to rotate it 360 and more than just rotate it you can actually move it like the mirrors of your car. It has some protections to protect your car, your phone, and to prevent the phone from falling. And it can hold up to a 7" width phone. I think that even i bit more than 7 inch. I dont know if the one i sent in the link is the exact same one im using however it looks exactly the same. the hard sponge in each side allows you to implement pressure on the sides that will prevent the phone from falling. You can pretty much adjust everything to your liking with this mount. I dont know about others similars to this one but this one has been for me the best out of all i have tried.
It also should work on any vents of any car. The reason i dont like the magnet ones is because it usually requires for you to paste a sticker and it limits yourself to only the devices who have the sticker. However, what happens when your phone is dead and for example your friend has his phone and he/she lend it to you to put the gps or put music?
Of course, try to find one that is closer to your location if you want to pay less, or from Asia.
joseguillen1994 said:
iUnless you have a very thin cover...
Click to expand...
Click to collapse
I'm using a generic 'air vent' style magnetic mount, with the metal plate gaffer taped (duct tape in US?) inside a 'Spigen Rugged Armor' case and it sticks/works fine. Done several long journeys over 'normal' european journeys (i.e. roads with no offroading).
Will be dependant on model, common sense and not driving like a ****, obviously...
gurningchimp said:
I'm using a generic 'air vent' style magnetic mount, with the metal plate gaffer taped (duct tape in US?) inside a 'Spigen Rugged Armor' case and it sticks/works fine. Done several long journeys over 'normal' european journeys (i.e. roads with no offroading).
Will be dependant on model, common sense and not driving like a ****, obviously...
Click to expand...
Click to collapse
yeah but since we dont know how anyone drives until we see it, i cant say how he drives. Also, the cover you are talking about is slim in comparison to what im talking about. Of course, he is on his liberty to buy the magnetic one. Everyone has different experiences with different mounts. LOL. I personally have tried 4 and none of them worked as good as the one i bought last. Also, in many occasions im driving with people that lend me their phones for multiple reasons. (that is my case only). And my saying is better to be prepared than sorry for every single thing.
joseguillen1994 said:
yeah but since we dont know how anyone drives until we see it, i cant say how he drives. Also, the cover you are talking about is slim in comparison to what im talking about. Of course, he is on his liberty to buy the magnetic one. Everyone has different experiences with different mounts. LOL. I personally have tried 4 and none of them worked as good as the one i bought last. Also, in many occasions im driving with people that lend me their phones for multiple reasons. (that is my case only). And my saying is better to be prepared than sorry for every single thing.
Click to expand...
Click to collapse
Agreed - this is very much a case of suck it and see. Just saying that this particular generic version works fine in normal driving conditions with a entry branded 'rugged' thickness case, rather than a thin one. If you are likely to mount curves or drive on particularly bumpy tracks experiences may differ.
Thanks for the input guys.
Currently I'm using a Poetic Atmosphere case. So I'm assuming it's pretty thin. I might give the magnet option a try.
For me, it is almost always Brodit, have a look at these. I have a Brodit ProClip installed in my car, and instead of Brodit device specific holder, I have installed Herbert Richter adjustable holder set up onto Brodit ProClip as I have more than one device.
TylerDurdenK said:
Thanks for the input guys.
Currently I'm using a Poetic Atmosphere case. So I'm assuming it's pretty thin. I might give the magnet option a try.
Click to expand...
Click to collapse
Good luck! And your welcome
I've gone for this.
Car Mount Holder, LanshionTM Universal MagGrip Air Vent Magnetic Car Mount Holder&Cradle for Apple iPhone 6/6 Plus, iPhone 5S 5C 5 4S 4, Samsung Galaxy S6 S5 S4 S3,Galaxy Note2/3/4,Nexus 5 4 and All Smartphone (Black) https://www.amazon.co.uk/dp/B013ACUCZW/ref=cm_sw_r_cp_apa_UN.wxbEAMJSF3
I'll let you know how it goes.
I've always disliked having things in the way of my view, I had a hard time finding a mount I liked and the wouldn't be too distracting while driving. I ended up getting a Cellet cup holder mount and I love it. Definitely keep it in mind if you're still looking around.
Hi all.
I too am after a good car mount. I have just come from the G3, and used a Kidigi "clamp" style car mount. Specifically fitted for the G3. Even if you had a case on your phone, you could remove a part of the product and it would fit snug as a bug inside whatever that saying is... Sadly they do not make any for the G5. Here's the G3 one if interested to see:
http://www.gadgets4geeks.com.au/kidigi-car-mount-charging-cradle-for-lg-g3
As you can see, it has the clamp on one side only. A much better design this way I think.
Anyways, the closest they have is this universal one (with a USB Type C charger): http://www.kidigi.com/index.php?route=product/product&productlist_id=7&product_id=120#.V81GIPl9670
I'm really bummed there's no car mount specifically for the G5 out there. If anyone finds one, please post it!
I think I'm going to end up going for a universal clamp style for the windscreen / windshield. I don't like the magnet kind, nor the ones that sit on the car vents.
---------- Post added at 10:01 PM ---------- Previous post was at 09:42 PM ----------
Esspee_London said:
For me, it is almost always Brodit, have a look at these. I have a Brodit ProClip installed in my car, and instead of Brodit device specific holder, I have installed Herbert Richter adjustable holder set up onto Brodit ProClip as I have more than one device.
Click to expand...
Click to collapse
So far I like this the best. Do you know how the G5 WITH the Hi-Fi Plus module would fare in this mount? Also, I am guessing the G5 cannot have a case on while in this mount, right?
invertedskull said:
Hi all.
So far I like this the best. Do you know how the G5 WITH the Hi-Fi Plus module would fare in this mount? Also, I am guessing the G5 cannot have a case on while in this mount, right?
Click to expand...
Click to collapse
I have the Spigen case with the HR mount and it works great. Downside is the USB needs plugged in every time vs my Brodit active charger for M8. Saying that the flexibility of the HR outweighs the hassle of plugging in the USB cable. The HR mount is an universal which is spring loaded to grip multiple phone shapes and sizes. Seems very solid after a couple of weeks use, hopefully it'll last, no reason for concern atm.
Sent from my LG-H850 using Tapatalk
If you have a CD slot in your car that you don't use... I would recommend this mount: https://goo.gl/vF8ZUh
I've been using it for the last two years, and I love it.
coyzer said:
I have the Spigen case with the HR mount and it works great. Downside is the USB needs plugged in every time vs my Brodit active charger for M8. Saying that the flexibility of the HR outweighs the hassle of plugging in the USB cable. The HR mount is an universal which is spring loaded to grip multiple phone shapes and sizes. Seems very solid after a couple of weeks use, hopefully it'll last, no reason for concern atm.
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Would you be able to show me a photo of your setup with the G5 wearing the case and in the mount?
EDIT: I just realised I would not be able to use the Hi-Fi Plus module with this mount. I would have to drill a hole in the bottom, which I wouldn't have an issue in doing...
Hey all. So is Brodit the only manufacturer making specifically LG G5 car mounts? I'm searching high and low and all others I find in my searches are technically "universal" car mounts. Boo! I may have to go without a case for my G5 and get a Brodit mount. Not sure how I feel about this!
There's a magnetic model from Anker. Has anyone tried?
https://www.walmart.com/ip/37551986...75035&wl11=online&wl12=37551986&wl13=&veh=sem
Right from Wal-Mart. By FAR, the best magnetic car mount I've ever used. Also comes with two magnets. Get it.
TylerDurdenK said:
I'm looking for a couple of mounts I can use in our cars. I would like universal ones that both me and my wife can use (she's just inherited my G3).
I like the idea of the magnet ones like this Look at this on eBay http://www.ebay.co.uk/itm/291750206879 but I don't know how good they are.
Thanks
Click to expand...
Click to collapse
i have been using the one below on My Fj from My G3 days. works just as well with the G5.
http://www.iottie.com/Product/Detail/1139/iOttie-Easy-One-Touch-2-Car-Mount-Holder-
invertedskull said:
Would you be able to show me a photo of your setup with the G5 wearing the case and in the mount?
EDIT: I just realised I would not be able to use the Hi-Fi Plus module with this mount. I would have to drill a hole in the bottom, which I wouldn't have an issue in doing...
Click to expand...
Click to collapse
I can't upload photos. If you still want photos maybe you can dm me.
Sent from my LG-H850 using Tapatalk

Categories

Resources