Ok, I have a BT200 that is working very quirkly with my i-mate. Sometimes the phone transfers the call to the headset, sometimes it doesn't. After deleting and recreating the bond, it works, but not for long. Anyone have one of these setup and working properly? Is there a trick to it?
Also, does anyone know if other headset drivers exist that may work on the i-mate that would allow you to hear all audio (not just phone) through a bluetooth earpiece?
Figured it out?
Ok, I've finally pinpointed that it works fine until I turn off the jabra headset, then when I turn it back on, I have to go through the entire thing again of re-creating the bond, etc..
Anyone know how to avoid having to recreate this everytime I turn the headset on or off?
I don't now ... but i have also jaba 200 and the MDA II is must arrive...
well please chip us informed
Thanks
DenisJ
I have the same combination and have also observed the same hassles.
It seems to work when I turn the BT headset function on the MDA off and on also. Thsi seems to result in a rebond.
Exact Steps
TBD,
If you could post the exact order of the steps you take to turn on / off the headset, I'd appreciate it. Right now, I'm doing the following:
1. Finish BT Headset Call.
2. Disable Bluetooth Headset Mode on Phone.
3. Disable Bluetooth on the phone.
4. Hold button on JABRA to turn it off.
Then, attempting to...
1. Hold button on JABRA to turn it on.
2. Enable Bluetooth on the phone (Set to "On" or "Discoverable")
3. Enable Bluetooth Headset Mode on phone.
4. Attempt to make call.
So if you could posts steps like that, i'd appreciate it. Also, do you set your bluetooth to "On" or "Discoverable"? Do you ever turn off the Bluetooth Radio completely?
Thanks,
Jon.
Yup me an all. I too have the Jabra BT200 and have the same problem. Providing you don't switch off the headset or go out of range your ok, but for instance when you leave the headset in the car and take the XDA2 with you you have to create a new bond to use it again. AHHHHHHHHH!!!
Shame cos so much else has been sorted on it.....and more. What a piece of kit!!
SOMEBODY HELP!!!
OK, so here is the sequence, which seems to work (for me).
1) I set everything up as per instruction. creating the bond between the Jabra and the MDA II.
2) Before (or after) I turn off the Jabra I disable the BT-Headset on the Today-screen.
3) Then I turn the Jabra on again and wait several seconds before enabling the BT Headset on the MDA II.
This seems to work most of the time, though the hint regarding going out of distance might explain the instabilities I have still observed. In any case, using the BT-Headset ON/Off on the Today-screen seems to resync things most of the time and get the Jabra up and running again.
Hope this helps and always open for new ideas
I have been a bit impatient after turning the BT headset on. I'll try it and let you guys know.
I may have been a bit optomistic. :roll:
Today I observed that sometimes the Headset reacts very late. Consequently you miss half of the call. Seems to be an XDA problem.
As for my XDA II with Sony Ericsson HBH-65, after creating the bond, before i turn off the BT headset, i turn off BT profile and BT on my PDA, then turn off the Headset.
If i want to turn on the headset, i activate BT on my PDA, then BT profile, the the headset. Sometimes in teh day headset seem to lose the bond and cannot use the BT to call or whatever. I tried turning on/off BT on my PDA, did not work. Turn on/off headset, it worked. So for me most of the time is my headset causing the problems
i am having the same problem with the new moto bluetooth headset although i have experienced no problemzs with the se hbh-30 bluetooth headset....i can turn off and transfer calls without any impact on teh bonding
Jabra problems
I've had similar problems on a boring old Nokia 6310 with my BT200. In the end, all I could do was find the 'automaticly reconnect' option on the Nokia. during calls, the link is allways fine, but between calls, when I guess one end or the other goes to sleep, the link will drop out, and then instantly reconnect. This happens around 2 or 3 times an hour.
Is there a 'automaticly reconnect' option on your XDA?
All the best
James
OK, I finally sacked my Jabra 200, because of its instability. What use is a headset, that doesn't repond when a call comes in? :evil:
I bought a B-Speech from B-Data yesterday and it seems to be working much better :lol: .
Nokia HS-3w headset with XDA II
Well! I am using the Nokia HS-3W Bluetooth Headset with my XDA II . I can pair up two devices and use it for only ten minutes :twisted: . After that, the headset will off(goes to sleep) . I Have to turn on the headset every ten minutes. I ask the dealer about the problem. They told me this headset work fine with Nokia's phone. They told me , there is three color on the light. Red light will flash when you turn off the headset. Green Light will flash when you turn on the headset up to ten minutes, if cann't find the phone devices , it will goes off.White light will flash, when the headset connected to the phone. When I turn on the headset, I just can see the green light only.But, if someone call me or I make a call ,the white light will flash.After the that the headset will flash the green light again for about ten minutes and goes off. Can anyone help me with this problem? Thanks!
@[email protected]
Hi, I will like to ask how your headset B-Speech is working.
It works 100%?
I have a jabra 250 with the same problems as BT200
Please let me know
Regards
JoseF
The B-Speech Headset is working OK, however it doesn't solve the problems with the Microsoft BT-stack.
Some observations, probably also applicable to the Jabra:
:?: When you go out of range with the headset, it will probably not reconnect automatically (but how do you know)
:x On an incoming call, the XDA may be very slow in activating the headset, so you might miss the call (seems to be tied into what the XDA s/w is just doing at the time
When you turn the Headset off, make sure to turn it off on the Today screen first. And when you turn them on, make sure to wait about 2 sec. after you turn the headset on before turning it on on the Today screen.
:idea: What seems to work best, is turning that Headset off and then on again on the Today screen. It usually comes back after that.
Mind you, it isn't the headset thats causing these problems. Its just that Microsoft botched the Bluetooth stack - probably the programmers had blue teeth from all the wine they were drinking!
I've found the out of range issue to be mute on my jabra 200. The only time the bond is broken is when the headset has been turned off. Or sometimes when it has been on charge.....
Strange........I use the Jabra BT 250 with the MDA II and have non of these reconnection problems. I f I turn it on and place a call (or receive) it reacts immediately.
However, I cannot use the advanced Headset Profile features of the Jabra with the MDA, but this is not the fault of the Jabra........
Could the people who are having problems and the people who are not having problems with their Jabra BT200's please post their version numbers of the Jabra BT200. You can find the version number on the boom going to the microphone. It will be 2 numbers and a letter, like 48A or something like that. I'm testing a theory that I think will help identify why some people work and some don't.
Thanks,
LouisK
Ok, the number on my Jabra Bt 250 is 44B.
I have an XDA II with a Logitech Mobile Bluetooth Headset for the last 7 months.
I've just returned one of these headsets as faulty because I kept losing 85% volume in the ear pierce ocassionally when I received an incomming call. I then bought another one and guess what? same problem, so the fault has to be with the XDA phone itself. The problem is I only seem to get this problem with incoming calls, can't remember getting this problem when making a call. When the volume drops I can just about hear the caller but its extremely faint.
The only other Bluetooth device I use is my TomTom navigation unit and although I have had some problems with both devices working together I'm not getting regular problems, just things like the TomTom can't alway connect to the sat box or my headset doesn't always work when the phone rings.
Anyone else had this problem and more importantly the solution???
Thanks
Paul.
I had that problem and I was advised to turn off device, remove battery for 20 secs or so (ensure backup fully charged!!!) and then reinstall battery, reset device (soft) then finally re-install headset ans establish new BT pairing to headset.
fiddly but it did work
good luck
Pete
I did that as advised by Logitech but the problem still occurrs on occassions. Is it a problem with headset or XDA?
hi folks,
i have a strange problem with the HTC Stereo Converter with Microphone from brando.hk
http://shop.brando.com.hk/prod_detail.php?prod_id=01946&dept_id=027&cat_id=0937
whenever i plug it in, use it with earphones listening to music after some minutes my diamond starts to call the last called person.
i don't klick on anything, it just starts to call "by itself".
cost me a lot of money to "autocall" a friend from a foreign country
anybody got the same problem/a solution for that problem?
using dutty's diamond rom 1.93WWE, radio: 1.00.25.07
additionally the sensorlock program
I had the same problem with my phone.
First I've tried to change the radio and rom but no use: still with the same problem.
Now I've changed the earphone/mic by another and now it's working fine.
I got same problem, how you solved it?
This is not so rare problem and it is due to stupid function of redialing after double click on active button on original headset. When you connect your adapter and 3,5mm headset then it is identified sometimes as doubleclick and starts redialing. This function is completly useless for me and is causing a lot of unwanted calls even if I do not have adapter connected( sometimes I just doubleclick active button by incident). I would be very happy if someone could tell me where can it be disabled in registry.
Hi all!
Here is my problem (tried with several other headsets as well):
When the headset is connected to the phone and you take it from larger distance than it's disconnects of course. BUT when you take it back it doesn't want to reconnect automatically. It's really annoying thing, because i'm using a stereo headset to listen music, and i can't bring it with me everytime when i have to move from my desk. I've had some other HTC before but never experienced this untill now on Raphael.
Any idea how to force TP to try to reconnect as the other devices do?
eami said:
Hi all!
Here is my problem (tried with several other headsets as well):
When the headset is connected to the phone and you take it from larger distance than it's disconnects of course. BUT when you take it back it doesn't want to reconnect automatically. It's really annoying thing, because i'm using a stereo headset to listen music, and i can't bring it with me everytime when i have to move from my desk. I've had some other HTC before but never experienced this untill now on Raphael.
Any idea how to force TP to try to reconnect as the other devices do?
Click to expand...
Click to collapse
is this a new BT headset you're using now? I believe some bt headsets simply don't (re)establish connection by themselves
There is a new Bluetooth stack in the Raphael compared to older HTC devices, so this could be an issue with it. Have you tried pressing your headset's play/pause button when you come back in range?
Trancecoder said:
There is a new Bluetooth stack in the Raphael compared to older HTC devices, so this could be an issue with it. Have you tried pressing your headset's play/pause button when you come back in range?
Click to expand...
Click to collapse
Motorola H3 headset: if i press the call button that the connection is reestablish
IQUA BHS-701-S: i have to turn it off than on to make the headset recconnect
btw: i've also noticed, if no device connected on BT, than raphael simple turns off the BT after a while
Mine has never turned BT off on its own. There must be an option for it, perhaps in power saving.
my problem is demaged usb slot or headphones becouse with slightest move phone starts to dial last number on the list
think how annoying it can be
any ideas how to turn this thing off ?
bump
nobody knows how to turn off the headphone-set dialing ?
Maybe this is impossible.. I've been having this problem for a long time and couldn't find any solution. Right now I just turn on the plane mode any time I walk with Raphael in my pocket. Otherwise I can make like 20 unwanted calls in 5 minutes. Unfortunatelly music still gets interrupted, by the dialer attempts.
Oh.. I use an USB-minijack adapter, but the same problem is with the original headset.