If I have installed HardSPL to my phone and flashed Dutty's HD V1.9 XTREME and now want to flash Dutty's HD V2.6 XTREME, do I have to install/flash HardSPL again to my phone before flashing the new rom? Still kind of new to this, help will be very much appreciated thanks!
You dont lose Hard-spl after flashing, you can go and flash duttys new work
HardSPL will be installed for good don't worry.
Why didn't you open the thread on the HDs forum?
Soft SPL
Hi
You CAN remove a hard SPL using Soft SPL or SSPL. Check in the relevant ROM Development Section to see if somebody has developed this. Otherwise, the previous post is correct, Hard SPL isn't just for your first flash, Hard SPL is for life!
Cheers
andrew-in-woking
i agree with andrew Hard spl is for life not just for christmas
Related
Hi, I am due to pick up my tytn 2 on Saturday so I have spent hours reading through these forums my brain is starting to bleed.
There is so much information in the forums can I just confirm that to flash I am taking the right steps.
The first question I have is 3.2x.Hard SPL an updated version of HTC Kaiser Hard-SPL v1.
My second question is prior to flashing a ROM, I would:-
1- Run a SSPL such as JumpSPL and then flash the HardSPL.
2- Flash a ROM, (I am looking at Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700)
I know the info is here, there is just so much of it.
Thanks for all the good stuff on here.
Marc
gospelflyer said:
Hi, I am due to pick up my tytn 2 on Saturday so I have spent hours reading through these forums my brain is starting to bleed.
There is so much information in the forums can I just confirm that to flash I am taking the right steps.
The first question I have is 3.2x.Hard SPL an updated version of HTC Kaiser Hard-SPL v1.
My second question is prior to flashing a ROM, I would:-
1- Run a SSPL such as JumpSPL and then flash the HardSPL.
2- Flash a ROM, (I am looking at Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700)
I know the info is here, there is just so much of it.
Thanks for all the good stuff on here.
Marc
Click to expand...
Click to collapse
Sounds good so far.
There are many versions of the Hard SPL now, flash the one recommened in the thread for your chosen ROM (dutty doesn't but I'd suggest 3.28 for this ROM).
Start with SSPL to flash the HardSPL, if you get a white screen then start on the Jump SPLs.
Once done, check Hard SPL is your SPL on your bootloaded and flash a ROM.
Easy
If you have a problem with any of the steps, please post in the relevant thread.
Dave
it's odd how many peoples' first ROMs are Dutty's
mbarvian said:
it's odd how many peoples' first ROMs are Dutty's
Click to expand...
Click to collapse
Mine was, back last year.
Dave
DaveShaw said:
Mine was, back last year.
Dave
Click to expand...
Click to collapse
I've been through many-a-Dutty's, but my first ROM on the Kaiser was Austinsync's BIGstorage version of HTC's original ship ROM.
mbarvian said:
it's odd how many peoples' first ROMs are Dutty's
Click to expand...
Click to collapse
That's funny you say that, my first 3-4 flashes were Dutty's ROMs.
To the thread starter....
My first flash was a bit of an adventure, I'm no guru like the peeps here but, I'm no idiot either. I would suggest bookmarking a few threads here to ease your pain. The Kaiser Wiki is a must have, as is AllTheWays' Ultimate Radio Thread.
Also, I would suggest reading through the thread of the ROM your about to flash to. That way you get a "heads up" on what problems you may or may not encounter. Hope this helps.
DaveShaw said:
Mine was, back last year.
Dave
Click to expand...
Click to collapse
Same here, Apr29 cube hybrid. Loved it. Just recently flashed to L26 v9. Seems more responsive, but I miss all the cool things that were in Dutty's. I've tweaked and installed too many things on this flash to want to flash again for a while. My next flash will be (if it ever comes) a honest to goodness 2D/3D driver upgrade which shows vast improvements with all the cool gadgets in Dutty's hybrid rom. (I miss the rotating cube most)
My first flash was NoThrills...would love to see an updated version. I've since gone Dutty, L26 variants, now on ROMeOS 3.1
Dear all,
thank you alot for your help but i have a question i am reading the wiki and the threads here but i can't find answer yet
the question is that i have a Kais 100 tytn II
and i want to flash a new cooked ROM , when i pressed the camera button with the soft reset i found this Info:
KAIS 100
SPL-3.29.0000
CPLD-8
am using WM 6.1
ROM version : 3.29.422.1 WWE
Radio version: 1.65.20.29
so now should i install any hard SPL or i can now Flash my cooked ROM ??
and how can i backup my contacts??
what is the steps to install new cooked ROM
Thanks alot in advance sorry for being dummy but this is my first time to hold HTC windows mobile phone
thanks again
loly2002 said:
Dear all,
thank you alot for your help but i have a question i am reading the wiki and the threads here but i can't find answer yet
the question is that i have a Kais 100 tytn II
and i want to flash a new cooked ROM , when i pressed the camera button with the soft reset i found this Info:
KAIS 100
SPL-3.29.0000
CPLD-8
am using WM 6.1
ROM version : 3.29.422.1 WWE
Radio version: 1.65.20.29
so now should i install any hard SPL or i can now Flash my cooked ROM ??
and how can i backup my contacts??
what is the steps to install new cooked ROM
Thanks alot in advance sorry for being dummy but this is my first time to hold HTC windows mobile phone
thanks again
Click to expand...
Click to collapse
Hi,
You still need a Hard SPL. The SPL you have is 3.29 but is the OEM version.
Download and Flash a 3.* HardSPL from the Sticky thread.
Backing up contacts can be done over active sync or using PIMBackup.
This section of the Wiki explains the ROM upgrading process: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
DaveShaw said:
Hi,
You still need a Hard SPL. The SPL you have is 3.29 but is the OEM version.
Download and Flash a 3.* HardSPL from the Sticky thread.
Backing up contacts can be done over active sync or using PIMBackup.
This section of the Wiki explains the ROM upgrading process: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
Click to expand...
Click to collapse
Thank you so so so so so so so much
i really appreciate your help
Hi all, i got installed HardSPL ver 1.x on my Tilt for use HTC and custom ROMs, but i got a question... what do version 3x of HardSPL? i can flash more ROMs? its better perfomarce 3.x than 1.x? i am a little lost in this aspect
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Travito said:
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Click to expand...
Click to collapse
not 3.56? i thought this was the newest and "best"...
I am using 3.56 and all works fine...
Did not noticed any difference between 3.29 and 3.56
3.29 SPL is extracted from the 3.29 Kaiser ROM, which until recently has been the latest official Kaiser ROM. (the 3.34 SPL from the newer 3.34 ROM has not been hacked)
3.56 SPL is extracted from the 3.56 Tilt ROM.
Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread.
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
Not comprehending something in another thread is not an allowable reason to create a new thread!
dani31 said:
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
Click to expand...
Click to collapse
He Sure could have posted in the existing thread to get a clarification. In fact he should.
Thread Closed pursuant to the guidelines set forth in the Kaiser Section Announcement and the Forum Policies.
I've been reading through the forums a bit, and I have flashed a few roms already...(obviously im a noob)...I keep seeing people who say they have SPL: 3.29Hard2. I read through mskip's noob thread for flashing and I used the JumpSPL1.56-KAIS.exe as guided in the thread...
What is the difference between the two?
jbob0124 said:
I've been reading through the forums a bit, and I have flashed a few roms already...(obviously im a noob)...I keep seeing people who say they have SPL: 3.29Hard2. I read through mskip's noob thread for flashing and I used the JumpSPL1.56-KAIS.exe as guided in the thread...
What is the difference between the two?
Click to expand...
Click to collapse
Jump SPL helps you to install HardSPL. HardSPL is what you need to flash ROMs other than stock ROMs.
I went into the bootload to check my SPL and when I did, it says SPL-1.0.OliPof
Should I update/upgrade it? Does it make any difference?
Short answer is that generally speaking 3.29 or above works best w/ WM 6.1 and 3.34 or above works best w/ 6.5 ... but as always YMMV.
Hard-SPL for Kaiser is tough thing to unravel, so here's a splendid resource --> Kaiser Hard-SPL Rollup Thread
BTW, there's two versions of 3.29 and 3.56 -- .Hard by jockyw2001 and .Hard2 by cmonex, and to this day I'm not entirely sure why...
vp3G said:
Short answer is that generally speaking 3.29 or above works best w/ WM 6.1 and 3.34 or above works best w/ 6.5 ... but as always YMMV.
Hard-SPL for Kaiser is tough thing to unravel, so here's a splendid resource --> Kaiser Hard-SPL Rollup Thread
BTW, there's two versions of 3.29 and 3.56 -- .Hard by jockyw2001 and .Hard2 by cmonex, and to this day I'm not entirely sure why...
Click to expand...
Click to collapse
The answer is in that thread (also see cmonex's old sticky)
Question Answered. Please use the mskip - Flashing for n00bs thread for these questions in the future instead of creating a new one.
Thanks
Dave
I'm running fasttest v3.03 and i want to upgrade to 2.1 build but everytime i do its so slow and lags. I would like to know what the newest radio and spl are and was wondering if i upgrade to a new radio and spl will this help the performance. Right now i have hard spl and 2.2219.26i. Thanks in advance for any help.
Please check the forum threads and use search before posting
http://forum.xda-developers.com/showthread.php?t=605239
thanks for the help but the link u gave me sends me to a radio and spl that are only for 32a this dosent help me
Those aren't even the newest.. but if you tried to do some reading instead, you would understand that radio and spl have nothing to do with the performance of 2.1 roms. So don't bother changing it. It's missing drivers