Database Info

Urgent - Dead

Hello,
My S200 doesn't work. Why?
Because:
1-I had a version of OS - 2.13.9.26 (versao em Portugues)
2-I update for AKU 3.2 ( PDAMobiz_Prophet_WM5AKU3.2_v3231)
3-Tried to unlock ( lokiwiz03a)
4-S200 doesn't work well, didn't receive calls (only rings when I choose Start> Phone), it was impossible saw the contacts, etc. So I tried install AKU 2.3 (2006-11-12_Prophet_WM5AKU2.3_lvsw_edition);
5-The instalation was longer than 30 min, so I restarted.
Now, the phone doesn't start the OS. Stay on "bios" stage:
IPL - 2.09.0001
SPL - 2.13.0001
GSM- 02.30.21
OS - 2.15.13.27
I just tried:
-(2 buttons + restart + Dial button) - for factory default
-restart
What I do now? It's impossible to install another ROM...
Thaks in advance.
JoDiz from Portugal.

-go into bootloader mode (hold camera button and press reset)
-upgrade to the latest Dopod ROM ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip (you MUST do this before upgrading to AKU 2.3 or 3.2)
-upgrade to AKU 2.3 or 3.2
2.3 is more stable... but 3.2 has more features

Impossible
Hi,
But it's impossible install other ROM. I can't connect S200 with PC by ActiveSync. I had try all the combinations that I knew to restart, but... nothing.
I think that when I did the first Update, to version 3.2, I didn't make the HARD RESET, I madden a normal reset. And I think, that these is the reason for the message: "ActiveSync can't syncronized with your device, please free memory, or restart your device".
How I do for connect the device to my PC? If I don't connect my device with PC it's impossible install anything.
Thanks,
Best Regards.

while in bootloader mode (color bars) connect usb cable then run original dopod rom installer from desktop. it should work

csjneek said:
while in bootloader mode (color bars) connect usb cable then run original dopod rom installer from desktop. it should work
Click to expand...
Click to collapse
Yes, u don't need activesync as long as the USB is detected when you plug it into the device.

thank u
i had the same problem on my g4 i-mate jamin with the 2.13 rom
thank u

It works
Hi, it works.
Thanks for the help.

Dutty Rom OK, than install Radio HTC --> HTC TILT

I freinds,
I install Duttys super ROM Version 3. Everythink work
I want to updated the Radioversion to 1.27.12.32. on 95% the Updadate stop and the HTC is titil. Hardreset go every time in the Bootloader SPL 1.56.0000.
is ther a way to close the bootloader a go bag ?
thx Thomas

Thomas_Germany_Hamburg said:
I freinds,
I install Duttys super ROM Version 3. Everythink work
I want to updated the Radioversion to 1.27.12.32. on 95% the Updadate stop and the HTC is titil. Hardreset go every time in the Bootloader SPL 1.56.0000.
is ther a way to close the bootloader a go bag ?
thx Thomas
Click to expand...
Click to collapse
search the forum for mtty

Hey crispyj,
THX for your answer. Coud you tell me, what is mtty. If I search a found much Information. It is a Tool? ....
I am not a technical Consultant, I am only a user ....
THX Thomas

I have found the solution
1.) connect to usb
2.) Kill Wcescomm.exe or disable Activ Sync connection to USB
3.) Start mtty.exe
found mmy.exe on http://forum.xda-developers.com/showthread.php?p=1784676&highlight=mtty#post 1784676 816 !!!
4.) Connect the Port:USB
5.) local echo YES
6.) CMD> boot
7.) Enter
Kaiser will Reboot in the last state

Thomas_Germany_Hamburg said:
1.) connect to usb
2.) Kill Wcescomm.exe or disable Activ Sync connection to USB
3.) Start mtty.exe
found mmy.exe on http://forum.xda-developers.com/showthread.php?p=1784676&highlight=mtty#post 1784676 816 !!!
4.) Connect the Port:USB
5.) local echo YES
6.) CMD> boot
7.) Enter
Kaiser will Reboot in the last state
Click to expand...
Click to collapse
You may need to run hardspl again after doing the boot command in mtty just to ensure it won't go back into bootloader upon your next soft reset.

danke, super klasse.
we need more german-roms

HELP Please , I've lost my pda software

I've XDA neo ,and it's Rom version is old and german one , I want to update using AKU 3.3.13
I start it , but it lasted more than 40 minutes without any result , so I disconnect the pda , and restarted it ,but it stopeed at O2 screen ,the first screen at all ,where typed :
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 3.0.0.0
I don't know what to do now ,plz help me to solve this problem
many thanx for ur reading my ask

What ROM (the update) where you trying to isntall? Was it an official one, or a cooked ROM?
Try to enter bootloader (the three colour screen) bu pressing and holding the com manager button and performing a soft reset.
If this works, download the latest version of active sync and install it, and once that has completed, restart your computer.
Download a WM5 NVID (No Vendor ID) ROM from here and unpack/unzip it into the root of a harddrive (i.e.: C:\WM5ROM\).
Now, put the device in bootloader mode, and within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB) and plug the device into the computer.
Now run the RUU from the WM5 ROM you downloaded earlier.
Your device should now work.

Many Thaaaaaaaaaaanx
At Last i've got my pda again
it worked very well,thank you very much for your help
by the way , the link for the rom which u've put in ur reply doesn't work but i get the oficial rom 2005 from another website and applied ur steps and everything is going ok
thank you very much

No problem.
The reason the link didn't work is because the FTP server doesn't allow direct access. You learn something new everyday.

I-Mate Jam Bootloader & Connection error!

Hello XDA Nice Team !
By mistaken i wrote some file to my bootloader in my I-Mate Jam ..
That was after using the bad ROM : 2.03
it's the worst cooked version i saw !
Now my bootloader mode is working .. but no way to connect to PC with USB port ..
My computer does not recognize my Magican when plugged in bootloader mode anymore!
Bootloader Ver: 1.0
is there any way to fix or upgrade or restore original bootloader
Now i cant upgrade or downgrade my magican by any method
Noway to use successful connection with any roomupdate utility
Please help me to fix or restore my bootloader!
Thanks to any one read or replay or try to help or help me to resolve my problem
XDA lover

i'm sorry that happened mate...
i've had success with flash-from-bootloader attempts before, both on my Magician, when i accidentally flashed off of Vista and it'd enter the bootloader every week or on a reset using the reset hole, and also on my Wizard when i ignored warnings from WM5torage and it'd only enter the bootloader
what precisely happens when you connect to the PC, allow USB connections in AS/MDC, and let the phone enter bootloader however it does? i can just flash a rom from there, but i won't (iirc) get any reports of as recognising the device...

My experience:
1- when i plug my sd card into my jam .. usb not recognized in bootloader mood !!
2- when i use puty or roomupdate it reaches to USB> then when i type any command it does not respond !
3- i could do something .. i let my phone bootup and this i-mate logon screen stays 4ever .. i connected my ppc to pc and i could explre my imate by activesync ...
i could reach something .. when i explore my phone and remove everything from startup folder .. my phone boots .. and i can see start botton .. no touch alignment comes .. and everything works .. but.. screen is virtually reversed .. i can see the OK botton but i must click on the facing area and it be clicked ..
i think i executed some wrong hard SPL to my phone ant that happened >
is there any way to resolve this problem?
is there any way to erase flash on my I-Mate Jam????
is there any way flash my phone?
i also have prepaid JAFWM with pkey and USB cable .. no BOX ..
Help please!

that's messed up... howsabout flashing it at the point when the phone boots up? if there's an AS connection there, then it may work... i'd flash to an official rom though

Same problem , PLS Help !!!
Thx for help

You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.

If your magician isn't detected at ALL by your PC when plugging the USB cable into it (i mean, no new hardware; no unrecognized hardware; nothing is detected in your PC when you plug the USB cable), and unless you had previously made a SD backup of your entire Flash with this procedure ( http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash ), then your only option will be to build a JTAG diag cable:
Here are some general directions / ideias:
Magician JTAG pinout: http://wiki.xda-developers.com/index.php?pagename=MagicianJTAG
How to build/run the JTAG: http://wiki.xda-developers.com/index.php?pagename=DeadBoot
Photos : http://www.cf-box.com/htm_data/55/0912/1679.html
Some interesting stuff for debugging problems: http://pda2u.ru/ptopic205.html
For sure cotulla has one built so to test his ROMs + bootloader - maybe he will be willing to give you some directions if you run into problems, and above all, give you a prepared .nb0 (with the bootloader file) for your magician, which i do not know if there's one out there, extracted from an original ROM.
Anyway, you can always try and do it for yourself using itsme utilities. Follow this link: http://forum.xda-developers.com/showthread.php?t=218643
Regards

Keeper,you're awesome! I'm searching for JTAG,too

xiaojin1985 said:
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
Click to expand...
Click to collapse
Dear xiaojin1985 ,
Thx for your help, But unfortunately i tried your solution but it dosnt work !

Dear Keeper,
Thanks too for your help,
and i think the solution for my problem is one of the solutions you says ( How to build/run the JTAG: ) ,
but the pictures is not available anymore , so pls can you get the pictures ?

All the pictures are in here:
http://s218.photobucket.com/albums/cc23/alex_beda/ and in attachment there's a .mth file with all the pics built-in.
Don't take it wrong what i'm about to say, but in all honesty if you can't figure this out yourself (digging up the internet for the missing pics), i would suggest that you shouldn't try this, since this ain't easy at ALL...
Just to give you some ideias, it will require you to adapt your magician test point signals (TDO;TDI; nRESET; etc,)seen on the magician pinout pic to what is said; solder very thin wires (best done with a small hot air tip); fixate the small dip switch (micro switch) to be always on; keep the USB connected...idk... plus alot of other small details which ain't easy to accomplish.
Personally i haven't tried this yet but for sure it would work
If you decide to go ahead, please post some results!

Connection error solution
this is my problem
hi all. A friend of mine gave me an S100, and after i played for a few days with it, i decided to update it's rom. A "country error" problem appeared,cause i have the greek version, so i ran MaUpgradeUt_noID.exe which completed (as showed 100% process). My (new) problem is that i cannot update anymore. Every time i enter boot menu, i ran the upgrade
(HTCMAG_ROM_WWE_O2.rar) following all the steps normally. When the device resets (so the upgrade is going to start), it's re-reseting again and showing ERROR 101 connection error. Any ideas?
Qtek Greek version
R 1.12.00
G 1337.42
D 1.12.00 WWE
P.S. apart the problem everything is function properly
and the solution
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe radio_1.11_greek but idont reset the qtek in first screen
and upgrate downgrate start all ok
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe MagicianRadio_1.12.10. uk but idont reset the qteki n first screen
upgrate from radio 1.11 to 1.12.10
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run HTCMAG_ROM_WWE_O5_251209
everything is ok my magisian run the new Rom

here..........................

HTC Tornado - software problem

Hello
HTC Tornado - working but not in 100%.
If I want swith on - everything stop on first logo.
I can swith on this device in bootloader mode, after it I readed this:
Tornado
IPL 2.00
Tornado
SPL 2.00 0000
Tornado IU
USB
Today i download some rom file :
Build_5.2.1616.18120_____v3.7
but after flashing try - i see error "device is not connected".

With phone off, press and hold CAM button and plug in your USB Cable. As long as you see USB like on lower left of screen, as you have posted, you are good to flash. You might be using wrong ROM or wrong procedure. Make sure you follow Karhoe's guide for TORNADO. Under worse situation, flash with ShipRom which you can find on FTP and you'll be back to OEM state. Good Luck!
FYI: I'm using Nitrogen's WM6.0 SP1 and latest radio on his thread.
smootny said:
Hello
HTC Tornado - working but not in 100%.
If I want swith on - everything stop on first logo.
I can swith on this device in bootloader mode, after it I readed this:
Tornado
IPL 2.00
Tornado
SPL 2.00 0000 <<--- I HAVE SPL 2.00.0014
Tornado IU
USB <<<----GOOD NEWS
Today i download some rom file :
Build_5.2.1616.18120_____v3.7
but after flashing try - i see error "device is not connected".
Click to expand...
Click to collapse