you get 3 options,
connect via active sync
usb internet sharing
usb file transfer,
will i clicked one then allways use this option!!!
so now when i connect the usb to the pc i dont get the menu and choice!
how do i get it back??
cheers
i never did sort this, endded up flashing the rom to get the menu back, extream but i needed it!
Well ive accidently ticked the box not to show it again!!!!!!!!!!!! ahhhhhh dam it!
HOW DO I GET THE MENU BACK??????????
PLEASE
lol.. i've never clicked it and i have no idea how to get it back.. but just throwing something into the air.. maybe you should search the registry regarding "USB to PC" and see if there's a parameter key which you can change.
Related
Hi all I know there's been many a post about being stuck in the bootloader and I even went to the wiki to see what to do.
Firstly, when following the wiki (http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader) on the mtty_utility there is no option for USB only comm 1, 2, or 3 (am i being stupid?).
Secondly, I had a guess and tried all the comm's and eventually comm three seemed to be the only one working, but when I type in the commands it does not do anything.
Any help would be greatly appriciated as I would hate to see my uni go its been so good to me.
Thanks in advance
Jo
Please help
The USB option is at the very bottom of the list. Unless your PC isn't registering the ports, you should be able to get MTTY to work for that part at least.
Thanks for the reply but there wasn't a USB option, I've tried everything, I think it may be to do with vista continuously wanting to run mobsync.exe whenever I plug the uni in but there's no way to stop it.
I've tried ending it as a process but mtty still doesn't have the option of USB.
If you have any ideas please post them, am I right in beleiving that you cannot charge in bootloader mode? Or is that just off the USB?
Thanks
Jo
P.S. The laptop I'm using can read other things through the USB ports, and I have tried every port just to double check that they are not all on the same line (ie an internal hub).
I think it may have something to do with Vista... I'm not sure as I don't have a Universal...
If you have access to XP it may be faster and easier...
I think you may be right
I shall wait untill my housemate gets back in, if it doesn't work in safemode!
Cheers for your help anyway!
I shall keep all informed just in case anyone else ever has this problem
Got it working!
Right finally got it working! It took some time but I managed to revive it!
1) Connect your device in bootloader (Hold light button, power button, and reset),
2) Open Windows Mobile Device Center and in connection settings uncheck Allou USB Connections,
3) Goto contol panel-administrative tools-services and start windows mobile device connectivity and windows mobile device 2003 connectivity,
4) goto device manager and find your device and update the driver to the one that can be found here: http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista (it is the one in the modem folder, do not follow their instructions, it will not work in this case),
5) Open task manager and kill wmdc.exe, or anything with wm infront of it, also kill mobsync.exe
6) Goto: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader and follow the instructions (you should be able to see USB as an option now).
In mtty it took a couple of commands before it actually executed then once finished it looked as though it were completely dead, but connect the uni to the comp again in bootlaoder mode and all should be well!
With Reference to:
http://forum.xda-developers.com/showthread.php?t=291723
PS could someone put this in the wiki under the title "If mtty does not have the USB option in vista" I'm being a dunce and don't really know how to do it
Hi, my Fuze will not connect with active sync. it wont even be recognized on my computer so i cannot use it as a disk drive either. It does recognize that it is charging but wont connect! ive tried a hard reset and still no help. i cannot flash a new rom or anything because it wont connect! im not sure if it is the rom or not because it was working and suddenly it just disconnected and i cant connect since. is there anything i can do please help!
Only time i had this problem, was when i first bought the fuze. I had already had a kaiser sychned up w/ active synch. However i see now winmo has a device manager type of thing you can download, im guessing that will help using two devices.
did you or do you synch another winmo device on the same computer?
I have the same problemafter a reset. From the Start menu go to Settings and then select the Connections tab. Click on the "USB to PC" icon. Under ActiveSync uncheck the "Enable advanced network functionality". Active Sync should work properly.
ppfrank said:
I have the same problemafter a reset. From the Start menu go to Settings and then select the Connections tab. Click on the "USB to PC" icon. Under ActiveSync uncheck the "Enable advanced network functionality". Active Sync should work properly.
Click to expand...
Click to collapse
I arrived here fifteen minutes ago with the same problem of USB not doing anything.
I read this above but UNticked the "enable faster data synchronisation and then it worked. Some things drive you mad.
But still greatfull for the tip
Huib
I can no longer sync
Hi,
I also can no longer sync. I have just unticked the 'enable faster data connection' as suggested and it still doesn't work.
I bought a UK T-Mobile Vario 4 last week. I downloaded and changed the ROM to PROven ROM 3.1 a couple of days ago, and all was fine until this afternoon.
I have done a soft reset - not worked. rebooted PC - not worked. Ended partnership on Windows Mobile Device Center (I run Vista) - not worked.
HELP. I am a newbie and not technical, though I somehow managed to change the ROM after lots of attempts.
Any ideas anyone?
Thanks for your help
damian
benjaminbob said:
Hi,
I also can no longer sync. I have just unticked the 'enable faster data connection' as suggested and it still doesn't work.
I bought a UK T-Mobile Vario 4 last week. I downloaded and changed the ROM to PROven ROM 3.1 a couple of days ago, and all was fine until this afternoon.
I have done a soft reset - not worked. rebooted PC - not worked. Ended partnership on Windows Mobile Device Center (I run Vista) - not worked.
HELP. I am a newbie and not technical, though I somehow managed to change the ROM after lots of attempts.
Any ideas anyone?
Thanks for your help
damian
Click to expand...
Click to collapse
Sorry, I forgot to mention, the error message I am getting is:
"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. Try reconnecting the device. If Windows still does not recognize it, replace the device."
Any ideas???
Thanks
Damian
benjaminbob said:
Sorry, I forgot to mention, the error message I am getting is:
"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. Try reconnecting the device. If Windows still does not recognize it, replace the device."
Any ideas???
Thanks
Damian
Click to expand...
Click to collapse
I just had this problem last week! All of a sudden windows couldn't recognize the usb device. Very EASY fix. Reseat your Micro SD card, it worked for me the first try. Hope this helps!
My pc says my connection settings in my phone need to be changed. I don't remember changing anything and I don't know what to change them to.
My phone tells (after a failed connectoin) me there is a connection error and opens MEdia net settings. I don't know what that would have to do with anything. I know I haven't changed them. There is no need. When this problem came up I tried changing some things, they didn't work, so I put them back. This is the same PC I always connect the phone to. I don't know what has changed other than i was gone for a month for work.
I need help please.
the last flash was Energy ROM 20090801 standard
tweakedlogic said:
My pc says my connection settings in my phone need to be changed. I don't remember changing anything and I don't know what to change them to.
My phone tells (after a failed connectoin) me there is a connection error and opens MEdia net settings. I don't know what that would have to do with anything. I know I haven't changed them. There is no need. When this problem came up I tried changing some things, they didn't work, so I put them back. This is the same PC I always connect the phone to. I don't know what has changed other than i was gone for a month for work.
I need help please.
the last flash was Energy ROM 20090801 standard
Click to expand...
Click to collapse
Have you played with your USB to PC settings, untick\tick "Enable Faster Data"
If not, delete your sync relationship and establish a new one.
Yeah, I did both of those already. the only thing I can think to do is push the little button call "Wipe Device". then flash a new rom. I'm worried I will not be able to flash after that though.
I'm scared
Something is messed up... Sounds like a hard reset or a reflash is in order.....
Do you get the connection option screen when you plug it in to USB that says connect as:Active Sync, Modem or hard drive?
Usb Problem
From what i have seen, it can be the usb wire
darkreborn said:
From what i have seen, it can be the usb wire
Click to expand...
Click to collapse
Could be true. My usb wire at my studio is bad and I always have to curve it to make it work.
I might be mistaken, but I think I got a similar message a while back. I changed the setting in File->Connection Settings-> This computer is connected to: The Internet
And that did the trick for me...
I have an HTC HD with stock rom
I recently had to change my sd card for a new one.
I hard reseted to reinstall all my programs.
Bluetooth sync is ok but NO MORE SYNC BY USB NOW !
So I cannot install net CF 3.5 or sync music or GPS maps (files take too much time 'cause too big) ...
I have hard reseted my device, uninstalled and reinstalled WM device center latest version, unchecked "activate advanced network" in "usb to pc settings", deconnected my firewall and anti virus; tried active tweak freeware; changed cable ... NOTHING WORKS. No connection, no sound, no error message...
Please help !!!
If put your HD into bootloader, and you connect it to the pc, does the text 'serial' change into 'USB'?
If so, there's nothing wrong with the drivers so we need to look further.
If not, your drivers do not work.
Let me know if the text changed or not, then I'll see if I've got some solutions for you.
Hi Condor.
I don't see any change when I do as you told me. Serial doesn't change into USB.
Thanks for your help.
Finally had to bring my phone for repair. The motherboard has been changed. Now everything's OK.
When I would connect my phone to my computer I used to get a little pop up that would ask if I wanted to start Active Sync or just wanted to go into removable media mode. There was also an option to default to one or the other and not pop up the message anymore.
I must of accidentally hit that because I'm just going straight into removable media mode and never get the options to try Active Sync. Anyone know how to re-enable this option?
RedRamage said:
When I would connect my phone to my computer I used to get a little pop up that would ask if I wanted to start Active Sync or just wanted to go into removable media mode. There was also an option to default to one or the other and not pop up the message anymore.
I must of accidentally hit that because I'm just going straight into removable media mode and never get the options to try Active Sync. Anyone know how to re-enable this option?
Click to expand...
Click to collapse
Try.....
Start | Settings | Connections | USB to PC and you'll be able to tick the box that says "Ask me first about USB connection...."
HTH,
Mark.
Thanks Mark... That was exactly it.
fix sync
easy way you go to "security" - reset all setting, after that , hub up into computer , phone automatic run sync!