Related
my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !
Wow!
Wizard bootloader in a prophet!
I bet you wont have the battery problem with a wizard's crossbow rom!
bootloader
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl
alphazero said:
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl
Click to expand...
Click to collapse
maybe you can repair your bootloader now.
I have an idea of how you could do it with g3.
Is your cid locked?
Is your phone g3 or g4?
phone
its g4 xda neo cid locked
UPDATED NOW NEW TESTS DONE. IPL SPL = 2.21
if i use prophet roms now everything is slow on device not usuable. i have to use wizard roms LOL. only problem then no sound is working. but replacing dll from prophet gives u sound back again. ........ THIS IS ****ING BULL****. anyway its usuable again now. i flashed now the fucing pbootloader of wizard into my device..........................
Hardreset does not work anymore if holding camera and other button it goes again back to bootloader now i need to find out how u do a hard reset on wizard LOL.
anyway i need a IPL AND SPL From prophet ............... extracting ipl and spl from qtek prophet and traslating it making a new nbf results in a flash process but after i stays on old IPL SPL ....................... ill report soon more about this strage problem having a wizard bootloader on Prophet.
omg this is ****ing weird
that that works is really strange^^ thank you though again you rescued my device hope its gonna work for me I'll report in the next days...
so if I'm doing thats right the whole thing is working, while you are connecting the wires get don't plug the wall chargare in so you don't have elictricity and cover up the rest of the pins im not sure if thats necessary but you don't wanna brick your phone even more the phone is turning of though as soon as you disconnect the wires... i'm having a prophet rom on it right now i'm trying a wizard rom now...
alright im running the wizard aku 3.2 rom now. its working very well except that i have to wires coming out of the back of my pda.
but ipl downgrade might be possible from there... so thank ýou alot the solution works
your welcome
i will make a paypal account now so u can donate me i guess this solution is very good and no need to pay for it =)
UPDATE: IM NOW ON 2.26 TMOBILE WIZARD NOW WITH IPL AND SPL 2.26 THIS IS WORKING ****ING GOOD AND TRUST ME ITS FASTER THAN MY PROPHET WAS EARLIER WITH PROPHET BOOTLOADER.
GET THE TMO 2.26 from FTP and flash it. it will update ur device (IPL + SPL )too 2.26 never mind of it
IPL DOWNGRADE is NO PROBLEM FOR ME u can extract rom hex edit the ipl part and version number i did that already my ipl now is again to low number (custom) 2.01 but spl i coudnt find out to edit. im working with winhex and primary memory editing since this is very dangerous i dont suggest to do it. only experienced users should do that
WARNING WARNING WARNING !!!!
I WANT TO REPEAT AT THIS POINT AGAIN DONT TRY THIS ON WORKING DEVICE!!! ITS JUST A SOLUTION IF UR DEVICE IS ALREADY DEAD!!!!!!
alphazero said:
my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !
Click to expand...
Click to collapse
can u take a pic for the wires?
wires
NO need to i will explain in detail.
1. Take ur phone and put it on ur table =)
2. Turn it so u can see the camera
3. On the right u see 6 Pins.
4. The Pin 1 is nearest to Camera
5. Pin 5 would be far away from camera.
u got it now ?
it worked for me with the sixth pin to by the way but that might be why it doesn't work without the wires for me yet.
did you cover up the other pins alphazero?
you were able to flash a lower bootloader back onto the device right with some kind of hexedit application or something?
I think a lot of users would be glad if you could upload a rom that can downgrade the ipl and spl including me , as you said it requires a lot of skill to cook the right rom...
thanks man
Just a quick one. If you can downgrade the ipl and spl to 1.xx.0000 or 1.xx.0001, could it be possible to do CID unlocking?
Downgrade
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.
alphazero said:
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.
Click to expand...
Click to collapse
Status: IPL DOWNGRADE OF ANY G4 successfull !
SPL DOWNAGE OF ANY G4 under work !
haha be patient and 2 minutes later you post it
spl 2.21 is working normally on the prophet anyway doesn't it?
can you upload that downgrade?
how is it coming ...did you find out anything new?
if you manage to downgrade ipl and spl to prophet version you are where you were before you flashed the wizard rom right?
answer
yes it would solve the accident wizard g4 rom flash on prophet!
but isnt spl on the prophet 2.21 anyways and only ipl is 2.15?
Dear Alphazero is it possible to solve wrong flashed g3 with jesterz g4 rom so now i can be only in bootloader mode and i can start flashing my prophet but please tell me how and what with On my bootloader screen now is written IPL 2.10 and SPL 2.20.0001. Please help me repair my prophet if it is possible
Should I do something with cutting battery pins?
uhm no the battery pins was because our device did only turn on if it was plugged into the charger, which meant you couldn't plug it into the usb at the same time to flash a new rom.
your problem is different and can't be solved with that solution... sorry sd goldcard i guess
Yes but i can only connect to mini usb and from bootloader i can flash it with battery full so please tell me shell i cut some pins from the battery and what with should i try to flash
Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here
I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.
noob question
what the difference between sim unlock and cid unlock?
This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.
jockyw2001 great but make one for htc oxygen pls.
htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here
anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???
so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??
acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.
input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers
Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks
thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.
why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?
Successful rom flash done on a spv e650 on a sim unlock device UK orange
Hello everybody!
I made up a new version of pof's USPL, which is explicitly for the ELFIN 128/256 MB devices. So now you can flash SPL in step three without bricking your ELFIN, as USPL for ELF used to do.
This version is based on the ELFIN 2.20.0000 SPL and was patched the same way as USPL for ELF.
Download here:
http://rapidshare.com/files/94753943/ELFIN_USPL.rar
It has been tested by various users including myself and was verified to work without any problems.
Even though, I take no responsibility for any damages on your devices.
Thanks to pof for his great work!
If it doesn't work for you right away, follow the instructions in this file to enable RAPI prior to using USPL:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
EDIT:
SOME PEOPLE GIVE THE INSTRUCTION ON MY ELFIN USPL TO CANCEL STEP THREE. WHAT THE HELL ARE YOU THINKING WHAT THIS STEP IS? WITHOUT THIS STEP, THERE IS NO (!!!!!) SENSE IN ELFIN USPL.
So please stop giving tutorials on things you don't understand.
STEP 3 IS THE MOST IMPORTANT STEP! RUN IT, DON'T CANCEL.
good news for elfin users! well i will use this version when i got a chance lol thanks for your great job tho~
btw got you a mirror link: http://www.fs2you.com/files/0bbd31fa-e3ad-11dc-91b6-0014221b798a
cheers!
Great!Thank u very much!
is this working for
IPL 2.24.0002
SPL 2.24.0000????
eastwoodz said:
is this working for
IPL 2.24.0002
SPL 2.24.0000????
Click to expand...
Click to collapse
i have the same question.
I received a "corrupt image error" at step 3, i rebooted the device and is working fine like nothing has happened, any clues?
I have this ROM installed:
RUU_Elfin_CHT_OPEN_2.20.753.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced.exe
IPL 2.20.0002 and SPL 2.20.0000 both remain unchanged after running elfin-uspl.exe
what is difference from pof's USPL?
as i used it to update my ELFIN without any problem
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Nice, very nice tool ... no more brick then
Thanks for the work
Can someone please clarify this for me.
I bought my cellphone from Vietnam, and it is unlocked. It is windows 6 prof, and I am very serious about flashing my baby to 6.1. When I was in Vietnam, I was using VietTel, t-Mobile, and in Mexico using Telcel.
BUT I bricked my iMate Sp3i before, and didn't want(CAN'T afford) to brick another one.
The question would be.
Because it is unlocked. Do I need to CID Unlock my Elfin P3452 before upgrading to 6.1? Thanks in advance.
djvw said:
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Click to expand...
Click to collapse
somemore questions..
after runnig 2 steps successfully in pof's app, if rom update fails then i think it does not brick all the time.. atleast not 99% !!
is SPL temporary updated means after some update again CID is locked?
or it is permanent?
Excelent work djvw !! many thanks, I can confirm that works fine, three users in our spanish forum flashed this USPL and it works in all cases... no more white screen to flash roms.....
my problem is that my elfin gets stucks with that stupid penguin and 75% on my pc in step 2... doesnt move ahead at all.. did install the rapi cabs too.. did reset too.. any help or tips or guidance would be really helpful
ababrekar said:
my problem is that my elfin gets stucks with that stupid penguin and 75% on my pc in step 2... doesnt move ahead at all.. did install the rapi cabs too.. did reset too.. any help or tips or guidance would be really helpful
Click to expand...
Click to collapse
Try with a hard-reset, some users get white screen after hard-reseting the device.
and remove SDHC memory card if you have it.
djvw said:
With pof's ELF USPL you are able to proceed till the end step 2 and then flash the ROM you want. If the ROM is not okay, your device is bricked.
Also, for like 99 percent of our ELFIN users, flashing USPL in step three used to brick the device.
With my USPL, ELFIN users can run step three without bricking the device.
-> Why flash USPL in step 3?
Because only then you will be able to flash any ROM from bootloader, not only from a running OS.
@giants2k
Please make sure your device is RAPI enabled. You can find the necessary files including a manual on how to unlock RAPI here:
http://forum.xda-developers.com/attachment.php?attachmentid=46098&d=1186268099
Click to expand...
Click to collapse
ok, i will try this.
ciberus said:
Try with a hard-reset, some users get white screen after hard-reseting the device.
and remove SDHC memory card if you have it.
Click to expand...
Click to collapse
so u mean.. first i should remove the memory card, then do hard reset, do the screen alignment and all tht stuff and then use this uspl software?
ababrekar said:
so u mean.. first i should remove the memory card, then do hard reset, do the screen alignment and all tht stuff and then use this uspl software?
Click to expand...
Click to collapse
ok.. so it is done on my elfin... so i think.. didnt show me any errors... the ruu worked like a chram too and at last it showed me "Congratulations" but my question is how do i confirm if the cid is really unlocked... i dont wanna flash a good rom and get my touch bricked
Edit: it worked finally and i think my elfin should now be unlocked
Please, tell me the instructions.
I don´t Understand
Thank You
I have flash my ROM today with success !!!
From 2.26.111.53GER to 2.81.111.1GER without Extended ROM (T-Mobile Applications)
SIM Unlock worked too..
After a hard reset I have 137/81MB free memory...
T-Mobile Elfin - MDA Touch XL 128/256 MB
Thank you pof and djvw!!!
djvw said:
This version is based on the ELFIN 2.20.0000 SPL and was patched the same way as USPL for ELF.
Click to expand...
Click to collapse
Does this one work on ELF ? Anyone tried already?
I have an ELF touch with 2.20.0000 SPL, should I use this ELFIN version or use the 1.11 ?
i wannt to unlock cid and istall windows 6 or any rom how can i do this and any program i use
rom version 1.8.405.1 wwe
rom dat 11/03/06
radio version 02.71.90
protocol version 4.1.13.31
extrom version 1.8.405.101
model no hera 100
platform pocket pc
device name htc-p4350
windows [email protected] build 15633.3.2.0
os 5.1.422
ipl 1.08.0001
spl 1.08.0001
I sucsfuly instal wm6.1 but i wannt it arabic
WHEN I FORMAT MY OHONE IT IS DEAD NOW WHEN I TURN ON IT OPEN AND WRIT
ipl 1.08.0001
spl 1.08.0001
AND QUIKLY TURN OFF
WAT CAN I DO
It cant mak hard reset FORMAT FAILD
Your IPL and SPL were the wrong version. Search for "Goldcard herald" for a way to fix it.
i wannt to know Goldcard herald to fix my phone hera 100
i install window 6.1 succesfuly but when i mak fomat (formaat faild )
and dont open again it open at
ipl 1.08.0001
spl 1.08.0001
and quikly turn off
waht can i do plz
elpring said:
i wannt to know Goldcard herald to fix my phone hera 100
i install window 6.1 succesfuly but when i mak fomat (formaat faild )
and dont open again it open at
ipl 1.08.0001
spl 1.08.0001
and quikly turn off
waht can i do plz
Click to expand...
Click to collapse
Like I said:
ivanmmj said:
Search for "Goldcard herald" for a way to fix it.
Click to expand...
Click to collapse
The first thread it gives you is the answer.
i cant under stand Goldcard herald i wannt to explain it to me plz
http://forum.xda-developers.com/showthread.php?t=417930
I don't know how to do it myself since all my Heralds had the correct SPL and IPL. I just searched for Goldcard Herald. If you have any questions, ask them in that post and maybe the person who created it can answer them for you. Sorry.
i install window 6.1 succesfuly but when i mak fomat (formaat faild )
and dont open again it open at
ipl 1.08.0001
spl 1.08.0001
and quikly turn off
waht can i do plz
my phone now turn on bootloader and quikly turn of and when i format it
format faild
what can i do
and i wannt arabic langauge also for this phone
elpring said:
i install window 6.1 succesfuly but when i mak fomat (formaat faild )
and dont open again it open at
ipl 1.08.0001
spl 1.08.0001
and quikly turn off
waht can i do plz
my phone now turn on bootloader and quikly turn of and when i format it
format faild
what can i do
and i wannt arabic langauge also for this phone
Click to expand...
Click to collapse
As I said, look at that link I showed you. The Herald Goldcard. It will fix your SPL and IPL and allow you to flash the phone with 6.1 again. The reason why it broke was because you tried using USPL or HardSPL on a phone that did not meet the requirements.
Please read the link I gave you.
I want to explain this method a simplified manner
elpring said:
I want to explain this method a simplified manner
Click to expand...
Click to collapse
Then ask in the thread about it where people already know what you're trying to fix. More people will see your question there.
Here is an easier version to understand. (Same thing, just formatted easier.)
You have to realize that just like you don't know everything, we don't know everything. You can't expect us to FIGURE things out for you. The reason why I kept telling you to read that thread was because I don't know anything about it. The guy in that thread does. I can't explain it unless I try to figure it out FOR you.
Hello Dear friends.
I read wiki but still dont understand somethings
my phone is :
model no : ELF0100
RAM size : 128MB
Flash size : 256MB
Rom version : 2.20.463.1B WWE
Rom date : 10/02/07
Radio version : 03.07.90
Protocol version : 4.1.13.51
ExtRom version : 2.20.463.101
So my phone is Elfin ?
I tried install Shadow rom but always error
And always stop step 2/3 for make 2.26 ıpl and spl
Must i update ipl and spl for load a new rom
I tried all CID tools but cannot be succes.
Regards
to install new roms you have to use either Hard or Soft SPL
while hard spl is required only ondce and soft spl is required before every flash.
read this..
http://forum.xda-developers.com/showthread.php?t=406721
Thank you
nir36 said:
to install new roms you have to use either Hard or Soft SPL
while hard spl is required only ondce and soft spl is required before every flash.
read this..
http://forum.xda-developers.com/showthread.php?t=406721
Click to expand...
Click to collapse
Thank you very much
I will read this link and inform the result
Regards
Do you know an other way?
Dear nir36,
I tried this forms:
http://forum.xda-developers.com/showthread.php?t=408637
http://forum.xda-developers.com/showthread.php?t=372152
http://forum.xda-developers.com/showthread.php?t=406721
Hard reset and in customization soft reset again.
I install cert_spcs and Enable rapi
than restart than take the microsd and simcard
than run elfin_uspl and elf_usp_2.26.0000
but can not be success always when haret installing ,screen turn white and disconnect to pc
I used in vista and in xp
I did not run Touch_Unlock.exe because of viruses.
All my actions ı could not finish 3/3 step
What I miss or Is there an other method for CID unlock
Regards
some of these files might be perceived as viruses, but they're not.. it's safe to run them.
if you follow the instructions exactly as they're written you will manage unless your device has some kind of a hardware problem... trust that this has been done on many many .. many devices before.
in a more general manner, if you flash a hard-spl and then flash a specific rom of your choice, everything should work fine.