How do i get norwegian keyboard on ENG rom? - Touch Pro, Fuze General

Se tropic. I have ENG rom and i miss ÆØÅ in my keyboard.

Gmes said:
Se tropic. I have ENG rom and i miss ÆØÅ in my keyboard.
Click to expand...
Click to collapse
Do a search for "eT9.Raphael.wwe.kmap.txt" and you should find the instructions on how to edit that file to get your characters on the keyboard.

Bruk disse 3 programmene her for og få norsktatstatur på TP'en din.
Installer "T9 Input 14 Languages Update.cab" først.
reboot
installer "XDA JCEspi2005 Norwegian Input Raphael.cab"
og tilslutt installer "XDA JCEspi2005 Norwegian Raphael.cab"
Etter dette rebooter telefonen.
Deretter velger du onscreen tastaturet og trykker på den lille pilen ved siden av og velger norsk tatstatur og T9 layout.
Etter det har du norsk tastatur både på soft og hard keyboardet.
This was in norwegian to make it simpler for the Norwegian keyboard setup

thx its working now

Tusen hjertelig takk zeb crs!
Måtte lete litt etter en løsning på dette.. bra noen har peil

Does this work on touch hd?

Short story, the CABs rendered my HD2 useless for normal 7-bit alpha text input, while numbers and other characters works OK. Uninstall of the CABs didn't resolve the problem... :-(
In Norwegian:
8<------------
Det som skjedde etter installasjon av disse 3 CAB'ene og omstart - var at normal ASCII ikke lenger virker på min HD2... Symbolene synes, men tastaturet gir ingen tegn til applikasjonen ved trykking. Numeriske og diverse andre karakterer virker OK... Avinstallasjon løste heller ikke problemet. Dette var shaky greier! Tok selvsagt ikke backup av registry, dum som jeg var :-(
Hvordan kan jeg komme tilbake til originaloppsett eller et oppsett som virker?
8<-----------

Norwegian keyboard on touch pro 2 after flashing to ENG rom
First of all thanks to creator of energy ROM. Paypal donation on its way.
Problem: After using stock rom upgrade (the original HTC rom upgrade) i got following bugs after several reinstall and re-downloading.
1. Sluggish performance. Up to 10 seconds waiting only to flip screen.
2. Conference speaker was not working properly. Had to turn on and off during conservations if I should have a hope of the other person hearing me.
3. When phone went to snooze mode (turning off screen etc), I did not get any notifications until I pressed power button.
4. Frequent soft reset du to freeze. (at least twice a week).
Phone has been on the market for a while, and I am really surprised HTC told me to send it in instead of admitting this was a software problem. Want pirates to buy products? Make them right!!
Solution:
1. Use the HARDSPL thingy found in the touch pro 2 forum. This makes it possible to flash it with another rom. Read the beginners tutorial.
2. Find your wanted rom. And flash with the tools provided there. I higly recommend Energy rom
3. After some searching and testing I finally found a working fix to get norwegian keyboard, t9, and æøå on the hardware keyboard. Email me and I can send it to you. (I don't know how to post files here, but maybe Energy creator can post it on sticky thread for his rom? Install cab and soft reset.
Concratulations. You have extended your phone lifetime with 2-3 years, without the nagging features HTC provides the phone after being "old" on the market!

Related

ACR not working on HD2 dutch ROM

Hy there to all of you HTC addicts,
I recently received my new toy, the HD2 in NL ROM setup (waiting for the WWE version was
to hard for me (stupid fool i've bin)) and now I am facing the effect that my beloved Top App is
not working like it has to. I'm talking about ACR the phone call recorder from our Guru Down
Under!
I figured out that on the HD2 WWE version (of a friend) it's working normal, on mine the level
of the incoming voice is to weak. Then I went true all the possible parts of this forum to find a
proper solution but could not find the right one.
I have the feeling that the difference must be the setup of the registry's, could some specialist out
here confirm that this is correct? And if so, where sould I look for chancing the registry to get
ACR working like on my TP2 and the HD2 of my friend.
Kind regards,
Bert
GOOGLE TRANSLATION:
Works like a top horn!
Werkt als een zonnetje hoor!
works fine on mine also!
GOOGLE TRANSLATION:
Uh ff for the record .... you got it working on an HD2 with NL ROM?
Regards,
Euh ff voor de goede orde....jij hebt het werkend op een HD2 met NL ROM?
Groet,
Bert
GOOGLE TRANSLATION:
Yes I have same problem it works but the inclusion of the other side is very soft.
When I hear the hard talk, but very soft side to fine tune this one that works well on both sides?
Ja ik heb zelfde probleem het werkt maar de opname van de andere kant is erg zacht.
Als ik praat hoor je het hard, maar de overkant erg zacht kan iemand dit finetunen dat het aan beide kanten goed werkt?
Reminder: English Translation Required
As per forum rules:
http://forum.xda-developers.com/announcement.php?f=263
Would prefer not having to close this thread.
hilaireg said:
As per forum rules:
http://forum.xda-developers.com/announcement.php?f=263
Would prefer not having to close this thread.
Click to expand...
Click to collapse
Yep your absolutely right, back on the track in English, still no response so I
think it's no the Dutch ROM they where using...
Kind regards,
Bert
Zeke_NL said:
Hy there to all of you HTC addicts,
I recently received my new toy, the HD2 in NL ROM setup (waiting for the WWE version was
to hard for me (stupid fool i've bin)) and now I am facing the effect that my beloved Top App is
not working like it has to. I'm talking about ACR the phone call recorder from our Guru Down
Under!
I figured out that on the HD2 WWE version (of a friend) it's working normal, on mine the level
of the incoming voice is to weak. Then I went true all the possible parts of this forum to find a
proper solution but could not find the right one.
I have the feeling that the difference must be the setup of the registry's, could some specialist out
here confirm that this is correct? And if so, where sould I look for chancing the registry to get
ACR working like on my TP2 and the HD2 of my friend.
Kind regards,
Bert
Click to expand...
Click to collapse
Dear Bert,
please let me know the download site of a working ACR for WWE ROM, because on my HD2 with original WWE ROM it doesn't works.
Thanks!
Koppány
@Koppany,
It sould be this tread http://forum.xda-developers.com/showthread.php?t=536472
Here you can find the several versions of the application. Good luck.
Kind regards,
Bert.
P.s. Please first install .NET CF 3.5 you can find it on the MS website
Zeke_NL said:
@Koppany,
It sould be this tread http://forum.xda-developers.com/showthread.php?t=536472
Here you can find the several versions of the application. Good luck.
Kind regards,
Bert.
P.s. Please first install .NET CF 3.5 you can find it on the MS website
Click to expand...
Click to collapse
Dear Bert,
thank you for your quick answer. I installed the .net cf 3.5, and then the ACR. I found only a version 0.0.3. Maybe it is not the latest, but the tread has 51 pages, i doesn't read the whole history. If there is a newer version, would you tell me please!
Thank you!
Regards,
Koppány
The version you installed now is the HD version, it is still en beta stage. If it
works its fine, if not then go for 1.2.2 or 1.2.3. You will find them at the end
of the third post in this tread (there where the creator of this app gives the
global FAQ at the bottom of that post).
Kind regards,
Bert
Still no luck

15/08/2010 Swype v3.9.20.20.6343 NL0.3 (NLD/DUTCH) (No longer available)

Swype v3.9.20.20.6343 Dutch (Removed)
Please read this FIRST!
Dutch translation can be found in post #2.
Dear all,
Because XDA has received another request by Swype to remove all (links to) downloads of Swype, I decided to remove these from this post. I don't want XDA to get in trouble and I certainly don't want to get warned or even banned for posting warez. You can read the full notice here: http://www.xda-developers.com/announcements/xda-notice-swype/
Sincerely,
Mac
Swype v3.9.20.20.6343 Nederlands
Lees dit EERST!
This is the Dutch translation of post #1.
Hallo allemaal,
Omdat XDA opnieuw een verzoek van heeft Swype ontvangen om alle (links naar) downloads van Swype te verwijderen, heb ik besloten om deze uit mijn post te verwijderen. Ik voel er niets voor dat XDA door (o.a.) mijn post in de problemen komt en ik zit er al helemaal niet op te wachten dat ik een waarschuwing krijg of zelfs verbannen word. Je kunt het bericht hier nalezen: http://www.xda-developers.com/announcements/xda-notice-swype/
Was getekend,
Mac
your links doesn't work, can you reupload them plz?
meta294 said:
your links doesn't work, can you reupload them plz?
Click to expand...
Click to collapse
no problems here....just downloaded the 5 mb cab, will give it a try (and report) later this weekend..... thanx for the share
Works great. Thnx
Stanley22 said:
Works great. Thnx
Click to expand...
Click to collapse
same shizzle here...
Swype
Hurrah, hurrah, finaly Swype seems to function on the HD2 with dutch language pack. Installed it and it worked immediately and flawless. The only remark i have so far is a lacking symbol on the returnkey. But thats a known issue with some versions and somewhere on this forum i saw a solution for that.
Thanks
I love swype too, but are these included dutch dictionaries extensive? Does swype only recognize the most common words in the dutch language and not every single word? And how does this dictionary compare with slideit?
It didn't work with Artemis V29.1 NLD. But I've fixxed this by simple going to the Windows folder on your device memory and move the swype folder from Windows into Program Files, no soft reset required it will just work after that.
And good lord it even vibrates now!? This new Swype seems more accurate aswell! Thanks for this amazing release!!!
Edit: as stated before only problem is the return key has no logo, but I didn't even notice that at first
Edit 2: I've seen a rebuild .cab which contains the returnkey, perhaps you could cook this one in dutch?
Edit 3: Return key over here for people who desire it. Just paste in your swype folder.
Edit 4: I've also noticed not every letter lights up when pressing it but that's something small.
Edit 5: Every other function like pressing down keys to get a symbol works far better then in the previous release.
urbie47 said:
The only remark i have so far is a lacking symbol on the returnkey. But thats a known issue with some versions and somewhere on this forum i saw a solution for that.
Thanks
Click to expand...
Click to collapse
BlazinAsian said:
Edit: as stated before only problem is the return key has no logo, but I didn't even notice that at first
Edit 2: I've seen a rebuild .cab which contains the returnkey, perhaps you could cook this one in dutch?
Edit 3: Return key over here for people who desire it. Just paste in your swype folder.
Click to expand...
Click to collapse
I found the same solution regarding the Enter key and copied it before creating a cab, but apparently it wasn't packaged in the cab. I'm rebuilding the cab today, see why it didn't include the Enter key... to be continued....
Sincerely,
Mac
barty22 said:
I love swype too, but are these included dutch dictionaries extensive? Does swype only recognize the most common words in the dutch language and not every single word? And how does this dictionary compare with slideit?
Click to expand...
Click to collapse
As far as I know, these are the original Dutch dictionaries, which are quite extensive. I haven't used SlideIT, so can't compare. It recognizes Dutch words which are most certainly not common, and it also proposes words which we don't use that often, but are apparently present in the dictionaries. Why don't you give it a try yourself? That'll probably be the best way to find out
Sincerely,
Mac
I have used SlideIT and must say the Swype dictionairy gives much more accurate suggestions, and seems to have a far greater knowledge about some complicated words.
By the way, is there a possibility you can include English in this release, so I can post on the forums from my HD2 using Swype? :$
BlazinAsian said:
By the way, is there a possibility you can include English in this release, so I can post on the forums from my HD2 using Swype? :$
Click to expand...
Click to collapse
Nope, at least not for now. The version I'm using is English only (although there are other language files in the Swype dir), so I had to replace the English language files with Dutch.
Sincerely,
Mac
Macelangelo77 said:
Nope, at least not for now. The version I'm using is English only (although there are other language files in the Swype dir), so I had to replace the English language files with Dutch.
Sincerely,
Mac
Click to expand...
Click to collapse
Ok perhaps for a future release, thanks for this great version
BlazinAsian said:
It didn't work with Artemis V29.1 NLD. But I've fixxed this by simple going to the Windows folder on your device memory and move the swype folder from Windows into Program Files, no soft reset required it will just work after that.
Click to expand...
Click to collapse
I have to flash V29.1 today, so I'll see whether I have the same issue.
BlazinAsian said:
Edit 4: I've also noticed not every letter lights up when pressing it but that's something small.
Click to expand...
Click to collapse
Can you give an example of a key? I've just tried, but can't seem to reproduce your issue.
BlazinAsian said:
Ok perhaps for a future release, thanks for this great version
Click to expand...
Click to collapse
Who knows, I'm not an expert, just a guy who likes combining solutions into one working solution
Sincerely,
Mac
Macelangelo77 said:
I have to flash V29.1 today, so I'll see whether I have the same issue.
Can you give an example of a key? I've just tried, but can't seem to reproduce your issue.
Who knows, I'm not an expert, just a guy who likes combining solutions into one working solution
Sincerely,
Mac
Click to expand...
Click to collapse
It used to happen with the entire second row of letters, but now it seems to flash up again, perhaps I wasn't pressing hard enough :$
just what I thought screen problems it freeze
reset a few times but it does not work everything is freezing
CHT is perhaps the problem.
Thanks for your try
huismeester said:
just what I thought screen problems it freeze
reset a few times but it does not work everything is freezing
CHT is perhaps the problem.
Thanks for your try
Click to expand...
Click to collapse
You're welcome. Anyone else having problems with CHT? I don't have it installed currently, so can't check myself.
Sincerely,
Mac
Thank you SO much ! I installed it and it worked Straight away, unlike other swypes, and its the black theme !! <3 (standard ROM)
any way we can add the dutch language file to our existing swype installations (with english & other languages)?

[APP] Romanian diacritics for Leo's keyboard

for all those that needs Romanian diacritics.
To mention that does not work the T9 option after you install this cab's. Also, works only on HTC HD2 (LEO). The diacritics will be entered by pressing for 2-3 seconds the keys a, q, i, s, t. Have fun! (Spor la tastat!).
All credits goes to Cristian Adam.
Tin sa te felicit pentru aceasta aplicatie in primul rand, si Multumesc. Foarte util ! xD
Salut, sorry, dar e creata de Cristian Adam. Thx to him
You can read more on this thema on this blog entry.
yep, exclusive for romanian users .
here you have a new modified version of keyboard, with the modification that the "â" is not present anymore on "a" key, because it is already on "q"; also, on numeric keyboard $ it's € now.
Nice job!Thanks
i have to mention that, for the receiver of the sms, needs to have installed the DroidFonts.cab installed; otherwise, will appear only some square's.
i confirm this... sms sent to nokia and ș and ț didn't appear right... though... sent to email it looked ok... but i think it all depends on what system fonts you have as default (pc or mobile)...

iGO primo™ v1.2 (9.2.1.178658) (Feb 9 2011)

iGO primo™ v1.2 (9.2.1.178658) (Feb 9 2011) is out
Steve0007 said:
iGO primo™ v1.2 (9.2.1.178658) (Feb 9 2011) is out
Click to expand...
Click to collapse
Yes, and there is a lot of problems with working on HD2 and almost all HTC device.
Thanks
radar-a said:
Yes, and there is a lot of problems with working on HD2 and almost all HTC device.
Click to expand...
Click to collapse
The only problem that still remain with the HD2 is the voice stuttering. All the other problems like crash, TTS, GPS signal etc were solved by configuring the sys.txt file.
About other HTC devices, I know that also Touch Pro and HD1 are having problems with the new primo.
is it possible to give the sys file my friend?
vstrom71 said:
is it possible to give the sys file my friend?
Click to expand...
Click to collapse
I already deleted it because i went back to 1.1. If I'll find a good sys, I'll give it.
Hi there !
This version of iGO i can run only in landscape mode !
my sys.txt is:
[device]
type="htc"
Thats pointing on: htc.ini file, whitch is in: config\devices\ folder.
htc.ini only contains folowing lines:
info_names="HTC HD2 T8585"
[device]
sdcard_name = "SDMMC"
[gps]
port=4
baud=57600
[interface]
maxzoom2d = 6000000
show_exit = 1
[network]
available = 0
[power]
backlight_max = 4
backlight_reverse = 0
backlight_key_bright_BA1 ="BrightNess"
backlight_key_bright_AC1 ="ACBrightNess"
backlight_key_timeout_BA = "BatteryTimeout"
backlight_key_timeout_AC = "ACTimeout"
backlight_key_ontap_BA = "BacklightOnTap"
backlight_key_ontap_AC = "ACBacklightOnTap"
backlight_key_on_BA = "OnOff"
backlight_key_on_AC = "ExtOnOff"
backlight_methods = 1
backlight_events = 1, 5, 7
[rawdisplay]
screen_x = 800
screen_y = 480
And thats it.
Its working but not very well so i think that someone who knows capabilities of HTC_HD2 can add some more lines on that for better smoothnes and advanced features of this new version.
Tanks in advance and best regards.
All the TTS Pro features are greyed out for me, except the last one. How can i activate the rest?
I have the nuance voice installed.
Ok nevermind..obviously my language pack was incomplete.
Can i somehow change the orientation vom 270 to 90 degrees?
nurps said:
All the TTS Pro features are greyed out for me, except the last one. How can i activate the rest?
I have the nuance voice installed.
Ok nevermind..obviously my language pack was incomplete.
Click to expand...
Click to collapse
I haven't been able to get TTS working with Nuance, only Loquendo and then it stutters. Can you describe you voice setup in detail please. I had Primo 1.1 working perfectly with Nuance and memory load was far lower than Loquendo.
Not much to it, got the voice pack from here: http://gpsunderground.com/forum/igo-voices/7787-voice-tts-pro-nuance-primo-1-2-a.html
Copied the files and it worked. But they seem to have only german and romanian in this thread.
Why isnt it working for you? In the voice pack i used before i had to remove the "apdb_filename="apdb_Samantha_NNG.dat"" line in the info.ini or it wouldnt stay selected in Primo. But this was a voice pack wich missed some of the TTS pro features. (maybe because it was missing some files in the tts_nua_v5 folder)
For me the old Igo 8.3 TTS voices dont work. Primo says they are the wrong voice pack. But i think it doenst matter..since i got the other one working.
Ah and the sys.txt needs at least this line:
Code:
[sound]
csv_voice_enabled=1
What about sharing some speed tuining options?
What makes if faster without loosing visual quality?
And what makes it faster with loosing some details?
nurps said:
Can i somehow change the orientation vom 270 to 90 degrees?
Click to expand...
Click to collapse
Try this,
[screen]
preferred_orientation=x
where x is;
0: 90 degrees
2: 270 degrees or -90 degrees
Doest seem to work, orientation stays at 270
I'm also waiting for a possibility to make it portrait... I've read it needs completely different data files for that, those have not been released (yet?).
nurps said:
Doest seem to work, orientation stays at 270
Click to expand...
Click to collapse
Well i dont want it in Portrait, just Landscape the other way.
Did anyone get the alternate paths for POIs,DEM and Speedcam working? For me it just doesnt, have to copy them twice, while it works nicely on the maps.
stottering.....
What the TTS announcements is. Starts times Primo 1.2, then go look at the extra settings, select the item Bildschirmkalibrieren there and execute. Then start times a route simulation.
I came out of a stupid accident.
On my htchd2 by this action all of the TTS vorgelesn Anna and navigate the street names when.
But only until you restart Näger Primo. After rebooting again I must carry the action with the screen calibration.
What it had to emulate, white I do not, but try it again.
sorry for my english
no stootering
AW: iGO Primo v1.2 (9.2.1.178658 - Feb 9 2011) 800x480, 480x272, 480x234, 320x240
Hier ist die lösung mit tts in pda von primo 1.2 version
download:
http://www.multiupload.com/RV8QZUWWR7
pw. Danke_Titanic
HTC HD2 Primo1.2 Skin : gj_ak_v3.7.1_ diMkaWA +utility
@ My friends, HTC HD2
@ Meine freunde, HTC HD2
@ Arkadaşlarım, HTC HD2
Skin : gj_ak_v3.7.1_ diMkaWA+ utility
The fix works in the HTC HD2 in every point,
Primo1.2
Das Update funktioniert im HTC HD2 in jedem Punkt,
Düzeltmilş her noktasında HTC HD2 de çalışır,
tested and works without calibration, the normal vote and TTS works.
thanks to all..
getestet und funktioniert ohne calibration die stimmen normale und TTS funktioniert.
danke an allen..
test ve ayar normal ve TTS sesler işler için herhangi bir kalibrasyon olmadan çalışıyor.
sayesinde tüm arkadaslara Tesekkürler
You: I have the necessary files made pure ready-made simply overwrite the old ones ..!
Sie: ich habe die nötige dateien rein gemacht fix und fertig einfach die alten überschreiben..!
Siz: ben gerekli dosyaları saf hazır sekilde hazirladim sadece eskilerinin üzerine yapıştıriniz..!
Neu iGo Primo 1.2 Update. exe 9.2.1.179499
http://uploaded.to/file/7uadgsgp
I had try to running on My Omnia 2 but is do hard to lock satellite, sametime its lost satellite so often.
I thing old version V8.5 is better and more stabile in my O2.
Or might be here O2 user can share trick how to lock satellite become more faster
Ji,
Would you post the link again
thanks

[Q] Er det noen norske app utviklere her?

Vi er en helt nyoppstartet lokal avdeling, Enebakk Røde Kors.
Som ny oppstartet starter vi med blanke ark, og eier ikke nåla i veggen.
Er det en app utvikler her inne som kunne tenke seg og hjelpe oss og lage en app som vi kan bruke til rekruttering, donasjon fra publikum, og nyhet og info spredning.
Mvh Magne Ravn Ottesen, Enebakk Røde Kors (styremedlem)
Mod Translation...
Are there any Norwegian app developers here?
We are a completely newly founded local branch, Enebakk Red Cross.
As a new booted, we start with a clean slate, and does not own hook in the wall.
Is there an app developer here who could think and help us and make an app that we can use to recruitment, donations from the public, and news and information dissemination.
Regards Magne Ravn Ottesen, Enebakk Red Cross (director)

Categories

Resources