hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
quappo said:
hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
Click to expand...
Click to collapse
hi quappo,
it's happened to me also..,
but I found it, it is because I have installed calendar ++ today plug in...
you try to remove this field from today.., it will back to normal...
a software problem was also my first thought but even after a hard reset i can reproduce the bt issue?
Had the same problem.
Did a Hard reset on PDA.
And removed all bluetooth devices from dektop-pc
Let windows search for new devices and everything should be ok.
Did a hardreset half an hour ago and got the same message.
Theres no bluetooth software installed
Did a reset and stil the message.
Did another reset and damn.....stil no luck only that stupid message.
And than i did a soft reset while the mda was on the usb sync cable to pc.
MDA recognized computer and everything worked fine.
So if you got this problem, just connect PDA to pc and reset.
h4ndy said:
quappo said:
hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
Click to expand...
Click to collapse
hi quappo,
it's happened to me also..,
but I found it, it is because I have installed calendar ++ today plug in...
you try to remove this field from today.., it will back to normal...
Click to expand...
Click to collapse
This has happened to me ranomly one time. I also have Calendar + today plug in as well. But I have not done any update of ROM to 1.06 at all...
I think its just a buggy OS - not surprising from Microsoft.....
I also confirmed that I experienced the same thing before the ROM 1.06 upgrade.
At most, we can only conclude that the upgrade does not fix this bug, rather than claiming that the upgrade causes this bug.
try using pocket bluetooth tools v.1.0.1.2, works wel for mini with rom106.
u can download fr. : http://www.bluetooth.jazztel.es/
I got fed up with the bluetooth and GPRS hassle of 1.06. Instead, I have now mixed and matched, and am quite happy with the combination in my signature.
I guess I now have a HTC Compact Mini Jam s100
MDA Compact -> KSE Truefax
O2 XDA Mini -> Extended Rom
i-Mate Jam -> ROM 1.03
Qtek s100 -> Radio 1.05
T-Mobile MDA to your rom, how to?
Starting with a T-Mobile MDA, how difficult would it be to get to your phone? Can you give any broad steps or links to follow? Appreciate the help. This rom is kind if slow?
Same error for me, with the original french rom.
What work for me : remove the sdcard, do a soft reset, and reinsert the sdcard after the boot process.
Has anybody tried some different stack for the Magician...as for the Qtek 9090 there are some widcome stack or others...don`t know exactly...that made some emprovements on the Magician BT? I would like to use it in car with some good BT headset...
Regards,
Primoz
Hi Andre ,
The same problem happens with my jam, i think BT sucks .. :x the problem is General i don't think the ROM is the problem,our devices maybe.... ?
:?
Minotavrs said:
Hi Andre ,
The same problem happens with my jam, i think BT sucks .. :x the problem is General i don't think the ROM is the problem,our devices maybe.... ?
:?
Click to expand...
Click to collapse
Hmm BT sux because of the BT stack...in ROM 1.03 I have no such problems (as described above)...I`m gonna wait for a few days and if the problems will be still there...will put back the 1.03 ROM.
Regards,
Primoz
I've just done a soft reset without calendar+ checked and without the SD and I don't have the BT stack message anymore...
snorlax said:
I've just done a soft reset without calendar+ checked and without the SD and I don't have the BT stack message anymore...
Click to expand...
Click to collapse
Funny...so if we want the BT to work we have to use the magician without the SD card...oh my god that is simply impossible!
Regards,
Primoz
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
snorlax said:
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
Click to expand...
Click to collapse
OK...but if I have some appz installed on the SD card? Then I have to soft reset again with the SD card in...and the problem is there again...?!
Regads,
Primoz
I have been flashed many devices with modifed qtek rom.
And I did not see any of these errors.
Pc78 said:
snorlax said:
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
Click to expand...
Click to collapse
OK...but if I have some appz installed on the SD card? Then I have to soft reset again with the SD card in...and the problem is there again...?!
Regads,
Primoz
Click to expand...
Click to collapse
Pc78, I don't think you will need any software installed on your SD card while rebooting your JAM...
Just (1) take your SD card out, (2) soft-reset your device, (3) re-insert your card, and (4) use your JAM normally.
Can't be more clear!
I have recently renewed the cover of my magician, i bought a new one on ebay. This isnt the first time i change the cover on Qtek pda so i know what i am doing. But after i changed i got this problems:
• Touch Screen wasnt working
• Cant install software, it always gives errors
When im installing software it gives an error when it starts upgrading on stop3 ( ce-rom ).
What should i do it seems this is only a software problem not a touchscreen problem.
Regards
New:
• Now it just doesnt want to update room it seems it stuck via usb
Hardware problem I think, how about hard reset ?
I can install rom, but cant install radio. Gonna try via SD
New:
• I can install storage
• Can install the room itself
Whem im installing radio it stucks on 0% for about 6minutes o think, i have tryed with every radio roms i've found. Can someone help me ? My touch screen isnt working aswell
Regards
New:
• Fixed touch screen
• I've screwed the radio and i dont know how, i can go to os and do everything but since i dont have radio the sim card wont work.
How do i fixe this i get a message " No Gsm " when i turn on the phone, and when i try to flash it it stuck on 0%.
Can i fix this if i flash a radio via SDCard ? Can someone give me a link to it ?
Thanks
Any one ? Need a guide to flash with SD Card
hello . i did apply today PROven 1.02 ROM and .28 radio. after changing settings in Advanced Conf Tool to apply 3g on\off in flo3d the program ask me to make a soft reset. i did it and then i came to bootloader mode and cannot boot the system....after reflashing phone from sd card nothing happened. phone is secure unlocked. someone can help ?
If you get in the bootloader the phone is fine en not bricked.
I would just download another rom en reflash the phone.
I've never flashed from SD, I just use my computer.
i reflashed phone with org htc rom and radio and than back to org.spl its work !!
thx
There are enough custom roms available....
So don't give up and keep flashing...
Hi guys,
i have updated my htc touch elfin whit an WM 6.5 ROM
and i think that it was for elf...(if that is important). So anyway it was working great, until the phone started to say to me that the memory is full and that i have to close programs. And the problem began in the morning when i restarted my phone. It went normaly first the *smart mobility* appeared and the the screen went blank!
after that it keeps doing that.
please help!
tnx
if your device doesn't load at all, try hard reseting it and see if that helps. if that doesn't help, try looking for SD card ROM flashing for your elfin.. so you can change the ROM to see if the problem is with the ROM or with the device.
whitch one? i have been looking for them but i cant find any ROM whitch could be flashed by sd card.
hi every one..
yesterday i downloaded the newest rom from htc which support ARABIC..
here is my steps:
1-I downloaded it,
2-extracted RUU***.nbh which size 220 MB,
3-changed the name of the file to KAISIMG.nbh
4-copied to the SD card
5-restarted in bootloader for installation
6-started progress until it reached radio or somthing
7-hanged for 10 miniutes at the same rate whith no changing in progress
8-restarted the phone
9-the device officially dead
I tried to remove the device`s battrey for 1 day,,but still nothing
PLZ HELP ME,, WHAT CAN I DO WITH IT BESIDE THOWING IT,OFCOURS ??
I have no idea about kaiser, but try get into bootloader (Hold Camera + Power buttons together and reset with stylus-Ithink) if you can then transfer another normal working rom to the sd and flash it. If you cant get it into bootloader then i think we can call it officially dead? Maybe if you search kaiser forum, there must be someone else whos had the same problem and look if they fixed it.
the problem is the device not working.. not even a power to lite the screen like if it was without a battry,, after all thanx for ur try