hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
quappo said:
hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
Click to expand...
Click to collapse
hi quappo,
it's happened to me also..,
but I found it, it is because I have installed calendar ++ today plug in...
you try to remove this field from today.., it will back to normal...
a software problem was also my first thought but even after a hard reset i can reproduce the bt issue?
Had the same problem.
Did a Hard reset on PDA.
And removed all bluetooth devices from dektop-pc
Let windows search for new devices and everything should be ok.
Did a hardreset half an hour ago and got the same message.
Theres no bluetooth software installed
Did a reset and stil the message.
Did another reset and damn.....stil no luck only that stupid message.
And than i did a soft reset while the mda was on the usb sync cable to pc.
MDA recognized computer and everything worked fine.
So if you got this problem, just connect PDA to pc and reset.
h4ndy said:
quappo said:
hey folks,
when my mdac was off, it needs some time until you can activate bluetooth after switching it on. if you dont wait long enough, you only get "no bluetooth hardware installed" message. only switching off/on again brings back the bt functionality.
is this only happening with my device? if i recall right, it didnt happen with rom 1.03...
regards,
quappo
Click to expand...
Click to collapse
hi quappo,
it's happened to me also..,
but I found it, it is because I have installed calendar ++ today plug in...
you try to remove this field from today.., it will back to normal...
Click to expand...
Click to collapse
This has happened to me ranomly one time. I also have Calendar + today plug in as well. But I have not done any update of ROM to 1.06 at all...
I think its just a buggy OS - not surprising from Microsoft.....
I also confirmed that I experienced the same thing before the ROM 1.06 upgrade.
At most, we can only conclude that the upgrade does not fix this bug, rather than claiming that the upgrade causes this bug.
try using pocket bluetooth tools v.1.0.1.2, works wel for mini with rom106.
u can download fr. : http://www.bluetooth.jazztel.es/
I got fed up with the bluetooth and GPRS hassle of 1.06. Instead, I have now mixed and matched, and am quite happy with the combination in my signature.
I guess I now have a HTC Compact Mini Jam s100
MDA Compact -> KSE Truefax
O2 XDA Mini -> Extended Rom
i-Mate Jam -> ROM 1.03
Qtek s100 -> Radio 1.05
T-Mobile MDA to your rom, how to?
Starting with a T-Mobile MDA, how difficult would it be to get to your phone? Can you give any broad steps or links to follow? Appreciate the help. This rom is kind if slow?
Same error for me, with the original french rom.
What work for me : remove the sdcard, do a soft reset, and reinsert the sdcard after the boot process.
Has anybody tried some different stack for the Magician...as for the Qtek 9090 there are some widcome stack or others...don`t know exactly...that made some emprovements on the Magician BT? I would like to use it in car with some good BT headset...
Regards,
Primoz
Hi Andre ,
The same problem happens with my jam, i think BT sucks .. :x the problem is General i don't think the ROM is the problem,our devices maybe.... ?
:?
Minotavrs said:
Hi Andre ,
The same problem happens with my jam, i think BT sucks .. :x the problem is General i don't think the ROM is the problem,our devices maybe.... ?
:?
Click to expand...
Click to collapse
Hmm BT sux because of the BT stack...in ROM 1.03 I have no such problems (as described above)...I`m gonna wait for a few days and if the problems will be still there...will put back the 1.03 ROM.
Regards,
Primoz
I've just done a soft reset without calendar+ checked and without the SD and I don't have the BT stack message anymore...
snorlax said:
I've just done a soft reset without calendar+ checked and without the SD and I don't have the BT stack message anymore...
Click to expand...
Click to collapse
Funny...so if we want the BT to work we have to use the magician without the SD card...oh my god that is simply impossible!
Regards,
Primoz
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
snorlax said:
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
Click to expand...
Click to collapse
OK...but if I have some appz installed on the SD card? Then I have to soft reset again with the SD card in...and the problem is there again...?!
Regads,
Primoz
I have been flashed many devices with modifed qtek rom.
And I did not see any of these errors.
Pc78 said:
snorlax said:
don't be that sarcastic : the only thing you have to do is do your soft reset without the SD card sloted in. But after the boot is completed you can of course re insert it !
Click to expand...
Click to collapse
OK...but if I have some appz installed on the SD card? Then I have to soft reset again with the SD card in...and the problem is there again...?!
Regads,
Primoz
Click to expand...
Click to collapse
Pc78, I don't think you will need any software installed on your SD card while rebooting your JAM...
Just (1) take your SD card out, (2) soft-reset your device, (3) re-insert your card, and (4) use your JAM normally.
Can't be more clear!
Related
I own an MDA compact on t-mobile uk,
whilst on there homepage i saw a "update your MDA software"alert,
i downloaded the software and ran it.
the MDA then went off and when turned back ran a hard reset.
the MDA then runs thru the set up,when thats complete is shows a grey type screen with serail v1.02
its frozen on this screen and unuseable any effort to do anything makes a repeat cycle of the above
please help me turn my paperweight back into a pda
thank you very much
(i think im best sticking to a standard phone from here on in,im not techy enuff to have a pda.doh!)
ur just in bootloader..go read wiki
u gotta press the reset,power and record camera btton together..thats wot i do for my 9090
thank you very much for your help
its appreciated .
ill try that
thanks again friend.
Jace,
the power & camera & soft-reset button will bring you in bootloader, just where you're now.
You'd better connect USB & run the update again. Something got broke the previous time, that's why you're in bootloader now.
Regards, M
brill guys ta
only problem(sorry guys still learning)from the bootload screen the pc wont see the device is connected and if i try to run the device to get to a standard screen to sync it just reboots?
how do i actisync while in bootloader?
ta
Jace pls don't try Act.sync. Run the update again :!:
ive manged to get the pc to see the pda and ran it under a guest partnership,
once it had seent he pda, i re-ran the update,but each time it goes thru the motions then gives and error msg.
man im goin back to a normal handset next time
What rom nr are you flashing? & what's the error message?
Cheers, M
Thanks for all your help sorry to be such a pain.
i got the file from the tmobile uk site .
file name ma-tmuk-11300-128-11200
when connectiong its says
updating from
device ce image:1.13.00
device ext imagethis is blank)
deivce radio:1.12.00
up dating to
device ce image:1.13.00
device ext image:1.13.128
deivce radio:1.12.00
it runs thru then stops and says
error 101:connection error
thanks
when booting up the bottom right shows
R 1.12.00
G t1337.42
D 1.13.00wwe
Ok that's the 1.13WWE rom, which is available sine october last year. Should be a normal rom without problems. If you never updated before & still in your warranty period, return your device.
BTW have you rebooted your PC during your sequence off tries?
Guess your no pain, but you got bad luck in upgrading this time. You did the right steps to cure everything.
Cheers, M
great thanks,
i have rebooted pc but ill do that then retry nothign to loose at this stage thanks mate
Did you ever make a rom-dump of your working device? Otherwise you can try to make one now & do a SD-update.
Cheers, M
no i didnt mate doh
ta for all your help mate appricated
Hi all
First of all sorry for my grammer, english in not my native language.
I've tried to update my O2 XDA Neo with SMART1 WM6 Rom, i've download the file and started the "UPGRADE_ROM.bat" after installation finished i notice an error click then hardreset the phone, for a second on the display apear the HTC logo, after that the QTec blue screen with the IPL 2.15.0001; SPL 2.20.0001; GSM 02.20.21; OS 10.1.0.811 and then nothing happens. I hardreset the phone several times but so far no good. I come up with idea to go to bootload (holding camera button and pressing reset) and try to reflash it but the update_rom.bat says "No Device Connected" from there i have no idea what to do. I'm with MS ActiveSync 4.5 please help me.
the same problem with me i tried several methods to fix this problem but unfortunetely couldn't find any solution to fix it finally took my phone to the technical service.If you have quarantie I recommend you to the same thing.But never say them that I tried to flash a new rom because this breaks the quarantie.Just say my phone doesn't start.Don't worry they can't understand that you 've tried to flash your O2
Ok, things you should *do* before upgrading to WM6
Make sure that you have AKU2.2 (for instance RUU_Prophet_220734_2207114_024721_NVID.exe) installed _BEFORE_ upgrading to either AKU 3.3 (aserg for example) or WM6. This is in any case true for G4, most probably this goes for G3 as well, but I cannot say this for sure, since I do not own one.
If you happen to get stuck at boot screen because update process failed, grab the rom above and run it with USB plugged in, this will 9/10 of all cases fix your device.
No, I do not have a link to this rom, try to look for it yourself.
For the rest, happy upgrading
rom flash
make sure you disable your antivirus softwear and your windows firewall don,t use any extended usb hubs and you have cid unlocked it make sure let it do a full flash dont do enything else with your pc when you flash your phone good luck i hope this was usefull
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
i recently bought a dopod 838. i used it for 2 months. it went smooth but now i have problems.
1. It would take me 4 minutes after Startup is finish( Sometimes i got stuck on the startup)
2. My computer cannot detect my device via USB for upgrade and activesync purpose even on bootloader mode. i cant reflash it.
3. My unit has a strange High Pitch System Music. like pop-up menus.. etc
4. Bluetooth cannot turn on
5. GSM feature is missing..(when i inserted my sim card NO SERVICE will appear on the status)
I did nothing,nothing at all nor crashed from a ROM upgrade. Im using IPL/STL 2.21. Hope you could help.
__________________
rus_18_ph said:
i recently bought a dopod 838. i used it for 2 months. it went smooth but now i have problems.
1. It would take me 4 minutes after Startup is finish( Sometimes i got stuck on the startup)
.
.
.
Click to expand...
Click to collapse
Did you try a hardreset
yes i already hard reset it.. still the same
May be you have problem with drivers in windows. Try uninstalling activesync and then reinstalling it.
rus_18_ph said:
yes i already hard reset it.. still the same
Click to expand...
Click to collapse
Buy my MDA...........
It's ready to go........
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
bagi said:
so i wuz updating my pda to wm6
and after the second step
my pda got an error
and since than i can not
use it. it shows only the HTC innovation and the qtek screen
and than stops...
i tryed hard`n`soft rest
but no hope, i dont know how to fix it, i need only to connect it somehow
trough usb to the pc
so i can put back in the previouse shape
any help would come handy thnx!
if anyone can help me
i am leaving my msn
[email protected] is my adress
and thenx
respect
Click to expand...
Click to collapse
DO NOT PANIC !!
it's funny because I did the same thing when I saw my phone doesn't hard reset! Okay , hold the camera button, while holding the camera soft reset ! keep the camera button until you get to bootloader! ( by this time you will feel much better) then download an original wm5 ROM ( NVID) and upgrade your phone with it. if you didn't understand what i said, you have to read the wiki!
Welcome to the world of PPC junkies !