hello . i did apply today PROven 1.02 ROM and .28 radio. after changing settings in Advanced Conf Tool to apply 3g on\off in flo3d the program ask me to make a soft reset. i did it and then i came to bootloader mode and cannot boot the system....after reflashing phone from sd card nothing happened. phone is secure unlocked. someone can help ?
If you get in the bootloader the phone is fine en not bricked.
I would just download another rom en reflash the phone.
I've never flashed from SD, I just use my computer.
i reflashed phone with org htc rom and radio and than back to org.spl its work !!
thx
There are enough custom roms available....
So don't give up and keep flashing...
Related
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance
You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry
you mean to say its over ?????????????
there should be any way
You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...
wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2
that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.
please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.
Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.
ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER
how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows
there must b some way to overcome this problem
jesterz's gold card isn't working yet, and for now it's only for G3...
My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks
have u tried holding the camera button while softreset and then flash rom again
Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use
i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !
I have recently renewed the cover of my magician, i bought a new one on ebay. This isnt the first time i change the cover on Qtek pda so i know what i am doing. But after i changed i got this problems:
• Touch Screen wasnt working
• Cant install software, it always gives errors
When im installing software it gives an error when it starts upgrading on stop3 ( ce-rom ).
What should i do it seems this is only a software problem not a touchscreen problem.
Regards
New:
• Now it just doesnt want to update room it seems it stuck via usb
Hardware problem I think, how about hard reset ?
I can install rom, but cant install radio. Gonna try via SD
New:
• I can install storage
• Can install the room itself
Whem im installing radio it stucks on 0% for about 6minutes o think, i have tryed with every radio roms i've found. Can someone help me ? My touch screen isnt working aswell
Regards
New:
• Fixed touch screen
• I've screwed the radio and i dont know how, i can go to os and do everything but since i dont have radio the sim card wont work.
How do i fixe this i get a message " No Gsm " when i turn on the phone, and when i try to flash it it stuck on 0%.
Can i fix this if i flash a radio via SDCard ? Can someone give me a link to it ?
Thanks
Any one ? Need a guide to flash with SD Card
I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help
You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.
Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help
Hmm, can u fully upgrade your rom ?
Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo
I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.
hi every one..
yesterday i downloaded the newest rom from htc which support ARABIC..
here is my steps:
1-I downloaded it,
2-extracted RUU***.nbh which size 220 MB,
3-changed the name of the file to KAISIMG.nbh
4-copied to the SD card
5-restarted in bootloader for installation
6-started progress until it reached radio or somthing
7-hanged for 10 miniutes at the same rate whith no changing in progress
8-restarted the phone
9-the device officially dead
I tried to remove the device`s battrey for 1 day,,but still nothing
PLZ HELP ME,, WHAT CAN I DO WITH IT BESIDE THOWING IT,OFCOURS ??
I have no idea about kaiser, but try get into bootloader (Hold Camera + Power buttons together and reset with stylus-Ithink) if you can then transfer another normal working rom to the sd and flash it. If you cant get it into bootloader then i think we can call it officially dead? Maybe if you search kaiser forum, there must be someone else whos had the same problem and look if they fixed it.
the problem is the device not working.. not even a power to lite the screen like if it was without a battry,, after all thanx for ur try
Hello
Could anybody help me with the orginal firmware for Sensation.
I have upgrade it to ARHD ICS 4 - 6.5.4 but now the speakers incall is broken and i need to return it in, and I know what there are saying, you have rooted you phone no garanties. .
So i need the orginale firmware for a Danish/europe phone normal sensation.
And also the radio for it.
Could anybody help me?
Regards Kenneth Dalbjerg
If your phone was unbranded then this RUU will do the job:
https://www.yousendit.com/download/M3BsUXVnUzhTSUJ2TzhUQw
Thanks. My phone was unbranded.
Hello
When i run the programs, it fail, right away when it trying to restore my phone.
It says it reboot it to bootloader, but that dosen't happent.
So i think it can't boot my phone to the bootloader.
Manually boot the phone into fastboot, connect to your PC and run it again
I have try that, but then the program wont find my phone
Should i be in recovery mode? or just fastboot?
Sorry think i wasen't in fastboot mode, just Hboot, or what the first screen name is , when i push fastboot, and try again, it found my phone, and start working.
Hello
Thanks for you help. My phone is now back to the normal rom again.
Regards Kenneth Dalbjerg