Hi all and I apologize if this is a common question.
I recently flashed my rom to G.DK series ROM and also Updated the Radio and HardSPL too.
I now want to reflash it back to original stock 6.1 WWE ROM but would the Hard SPL would be auto reverted back or do i need to change it as well ?
Thank you all in advance.
search
...
Please search and read before posting a new thread.
FAQ's here : http://forum.xda-developers.com/showthread.php?t=369282
Thread closed.
Ta
Dave
Related
Hi all,
is it possible to Backup my current installed German T-Mobile Firmware, so that i can test the AKU 7 Roms and "downgrade" back to the T-Mobile Firmware?
Kind Regards
Seppl
Assuming you have the Kaiser here's a thread on how to dump the ROM:
http://forum.xda-developers.com/showthread.php?t=334680
There's a sticky post regarding how to place the original rom on the device.
After dumping the ROM, you can reconstruct it for backup purpose reading this thread...
http://forum.xda-developers.com/showthread.php?t=337066
Cheers.
I already install Duttys Dualtouch v4 RTM on my Tilt, is working good, working slowly sometimes,
The radio version is the 1.27
Do u have to change the radio version? where can i get those new versions?
What do you think should i do?
Thanks
Hello,
Read this thread.
http://forum.xda-developers.com/showthread.php?t=349375
It contains information about problems and improvements of several radios's
I think you should READ
http://forum.xda-developers.com/showthread.php?t=349375
Then ask
I like seeing this, junior's helping junior's. That's something I haven't seen in a while.
Way to go.
Oh my. This is the type of question that could get you killed on this forum. Follow this link to the Kaiser Wiki. I suggest you start by reading the "ROM Flashing FAQ for Newbies". Hopefully you read the flashing instructions and installed HardSPL prior to flashing Dutty's ROM.
Dear all,
thank you alot for your help but i have a question i am reading the wiki and the threads here but i can't find answer yet
the question is that i have a Kais 100 tytn II
and i want to flash a new cooked ROM , when i pressed the camera button with the soft reset i found this Info:
KAIS 100
SPL-3.29.0000
CPLD-8
am using WM 6.1
ROM version : 3.29.422.1 WWE
Radio version: 1.65.20.29
so now should i install any hard SPL or i can now Flash my cooked ROM ??
and how can i backup my contacts??
what is the steps to install new cooked ROM
Thanks alot in advance sorry for being dummy but this is my first time to hold HTC windows mobile phone
thanks again
loly2002 said:
Dear all,
thank you alot for your help but i have a question i am reading the wiki and the threads here but i can't find answer yet
the question is that i have a Kais 100 tytn II
and i want to flash a new cooked ROM , when i pressed the camera button with the soft reset i found this Info:
KAIS 100
SPL-3.29.0000
CPLD-8
am using WM 6.1
ROM version : 3.29.422.1 WWE
Radio version: 1.65.20.29
so now should i install any hard SPL or i can now Flash my cooked ROM ??
and how can i backup my contacts??
what is the steps to install new cooked ROM
Thanks alot in advance sorry for being dummy but this is my first time to hold HTC windows mobile phone
thanks again
Click to expand...
Click to collapse
Hi,
You still need a Hard SPL. The SPL you have is 3.29 but is the OEM version.
Download and Flash a 3.* HardSPL from the Sticky thread.
Backing up contacts can be done over active sync or using PIMBackup.
This section of the Wiki explains the ROM upgrading process: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
DaveShaw said:
Hi,
You still need a Hard SPL. The SPL you have is 3.29 but is the OEM version.
Download and Flash a 3.* HardSPL from the Sticky thread.
Backing up contacts can be done over active sync or using PIMBackup.
This section of the Wiki explains the ROM upgrading process: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Ta
Dave
Click to expand...
Click to collapse
Thank you so so so so so so so much
i really appreciate your help
ROM Version : 1.56.405.5
Rom date : 08/28/07
Radio version :1.27.12.32
Protocol version : 22.45.88.07H
I searched alot cant find a 6.1 ROM for my Phone
i downloaded from HTC but after installing im getting same 6.0 only (
Please help me finding the 6.1 Rom for my version
All the Kaiser ROM's are on the Wiki: http://wiki.xda-developers.com/index.php?pagename=KaiserROMs
Info on Flashing Custom ROM's is here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Please take time to read the wiki and Sticky threads, consider this a freebe, but other users will be less than kind on you
Ta
Dave
first of all thanks for being kind and answering my question lst question can i install any rom provided there ?
mr521427 said:
first of all thanks for being kind and answering my question lst question can i install any rom provided there ?
Click to expand...
Click to collapse
Yes, just be sure to follow the instructions in the seconds link 1st, and read
Dave
Questions asked and answered. No need for the thread to live any longer.
Hi all, i got installed HardSPL ver 1.x on my Tilt for use HTC and custom ROMs, but i got a question... what do version 3x of HardSPL? i can flash more ROMs? its better perfomarce 3.x than 1.x? i am a little lost in this aspect
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Travito said:
1.x is primarily for the unlocking process, most to ALL Custom roms reccomend 3.29 these days, check with your chef.
Click to expand...
Click to collapse
not 3.56? i thought this was the newest and "best"...
I am using 3.56 and all works fine...
Did not noticed any difference between 3.29 and 3.56
3.29 SPL is extracted from the 3.29 Kaiser ROM, which until recently has been the latest official Kaiser ROM. (the 3.34 SPL from the newer 3.34 ROM has not been hacked)
3.56 SPL is extracted from the 3.56 Tilt ROM.
Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread.
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
wolframio74 said:
"Anyway, you could all find these answers in the sticky SPL threads and not make *another* SPL thread."
Thats why i did this thread xD, i dont find or understand the other one xD thx for the replies, i got HTC WM 6.1 Spanish ROM with the hacked 1.X, so i can safely updated to a 3.x one? Regards!
Click to expand...
Click to collapse
Not comprehending something in another thread is not an allowable reason to create a new thread!
dani31 said:
But you could post this in the SPL sticky. I believe you understood enough to find it, didn't you.
To be constructive: it is recommended that you update to a 3.x SPL with a WM6.1 ROM.
It's as safe as any other flash, meaning that you can brick your device if you don't now what you're doing, but not more.
Click to expand...
Click to collapse
He Sure could have posted in the existing thread to get a clarification. In fact he should.
Thread Closed pursuant to the guidelines set forth in the Kaiser Section Announcement and the Forum Policies.