i jus finsihed rooting my G1, but now when connecting USB to laptop I don get mount option my phone charges but as if it was just power chord not a USB. I am running Ubuntu on my computer if that helps.
i had the same problem, my mistake was leaving the usb cord in my laptop and just plugging the other end in my g1. when i had the cable in the g1 first and then plugged it into my laptop, it worked.
Check to see if USB Debugging is checked. It is in Settings>Applications>Development>USB Debugging.
This sometimes work for me.
Related
I've had my g1 for about 2 weeks. I have root. I have the RC33 update. I was able to connect to a pc after this update then one day I tried to get this song off of the computer so I plugged in the phone and it said "found new hardware"....I have tried everything different pc's different usb ports,different storage cards,....I tried the anycut app method....failed on one pc it opened on my laptop and then shut off again....I've soft reset,hard reset...removd the card and put it back in...no luck...any one with the answer please help...I will love you long time!
And the pc does recognize the phone is plugged up because its charging...
Hi,
Found new hardware means it was trying to install the usb drivers for your g1.
If this was not done correctly, than several things won't work like adb.
So that's what that message is.
But unplug your phone and go into settings, applications, development uncheck the box that says usb debugging,
Exit out and connect your cable, mount you drive and you can transfer files back and forth again.
Ok I did that but the box was already unchecked...so I plugged up the phone...and nothing happens so I check the box and the g1 acknowleded the pc and vise versa....and the installation wizard is for Android Phone...and is asking for an installation disk...so now I'm back to square 1...
Once you have plugged in the USB cable and Windows has recognized your phone (i.e. no new hardware found dialog anymore), you need to pull down the notification bar of the G1 and click on "connected to USB" or something along those lines. The phone will then give you an option to mount the SD card for read/write over the USB cable.
I'm trying to unlock my dads old Captivate, but I need to connect it to the computer to do this. No matter what I do, this phone will not connect or be recognized by the computer. I plug it into the computer and it makes the little beep it makes when you connect, but thats it. No "USB Connected" on the top bar or anything.
I can connect my captivate fine, its just his. I've tried uninstalling and reinstalling drivers and that wont work. Any ideas?
Do you have the drivers installed?
Sent from my SGH-I897
Ye, the drivers are installed. Would it be a driver problem though if my one captivate works, but the other? That sounds like a phone problem to me.
Settings> applications>usb(something or other)> mass storage.
Also make sure usb debugging is enabled...
The froyo settings might be different...the usb options could be in "wireless and network" instead of applications.
studacris said:
Settings> applications>usb(something or other)> mass storage.
Also make sure usb debugging is enabled...
The froyo settings might be different...the usb options could be in "wireless and network" instead of applications.
Click to expand...
Click to collapse
Nope, that doesnt work either. Its like its not even connected. Nothing showing up on my computer, nothing on the phone. The only thing that shows up when you plug it in is the charger icon comes on to let you know its charging.
i would recommend that you try another computer if that doesn't work, restore your phone to factory and if that doesn't work then you have two out of three possibilities that might lol, be seriously i think its not a drivers issue if the other phone is working. It might be a problem with the computer recognizing the port i really cant think of anything else..
Brought To You By:
-SystemErrorOne-
hmmmmmmmmmmmmmmmmmmmm
If it's not connecting to either captivate it's a driver issue. Make sure that USB debugging is on and that under the application usb setting you have it set to ask on connect. Try a different usb port on the pc, or another cable. I had a bad cable a while back that would charge but not connect, it was even the one that came with the phone.
Use a USB port off the back of the computer, coming DIRECTLY off the MB. There have been tons of issues with using remote USB ports. If it's beeping when it connects, it's being seen by the computer. Just that there's a problem with getting the proper info.
I get this problem sometimes too. This is how I solve it. Under USB settings select Samsung Kies and plug the USB cable into your computer and phone. See if your computer recognizes your phone. Mine won't recognize Mass Storage but will Kies. I don't have the program installed so windows will say Drivers Not Successfully Installed. Once you have done that, restart the computer and phone with USB cord unplugged. Once both come back on, switch your phone back to Mass Storage and plug in your USB cable to both the computer and phone and see if it will be detected by your computer. If not I would try a different USB cable. That is what works for me when I have that problem.
Sent from my SGH-I897 using XDA Premium App
Some cappies have issues with generic cables. Make its the original or a high quality one.
Sent from my GT-I9000 using XDA Premium App
Would be a good idea to check if the following
1. Settings- applications- USB settings : make it ask on connection.
2. Change the USB port which you connect
Hello Gents,
I purchased a USB OTG for my 7+ last week, all was working. the USB drives works, mouse works.
But this morning, when I tried to use the same mouse/usb drives. The tab does not seem to recognized the USB, I can see the LED on the USB blinks for a few moment and then turn off. Like it's getting power but then stop.
I tried the following.
1. reboot the tab. power on , power off. No go.
2. reboot from factory default ( yes it drives me nuts, but I did it anyway) Power Volume Up. Factory reset, data wipe. No go.
3. tried a new OTG USB cable, still does not work.
I had the Tab root before, but after the system reset, it gone back to stock firmware. The only thing I can think of is I did the latest Samsung Patch after my initial test.
When I look at the "dmesg"
s5p-ehci: detected XactErr len 0/8 retry
tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
ImmVibeSPI_ForceOut_AMpDisable...
Does anyone have solution for this problem?
Thank
P.S. these are not the OEM Samsung USB cable. But they were working before.
Also, when I plug in an portable external HDD, it does say, High power device not supported.
hi,,,
try to connect all tools to usb otg hub first before you conect it to GTab. i mean if you want to connect a flash disk or a mouse, connect them to the usb otg hub first before connect it to GTab.
for hdd, you have to connect a power supply to usb otg to make it readable on GTab. i use my old nokia charger to power the usb otg hub device.
hope it help and sorry for my bad english.
dan
edit : i use this device as usb otg hub
http://db.tt/fmw1MhTY
I have the same error.
I have the same error but when I reboot my Tab, it's ok, before reboot I do not disconnect USB from my tab!You can try!
I've had my OPO for a little over 7 months now. My issue began when I had my desktop at a friend's house and plugged my phone into a USB 3.0 port to grab some videos off the phone when the phone suddenly shut off and would not turn back on. I thought it was bricked somehow but after leaving it plugged into a USB 2.0 port for some time, the charging screen came on and I was able to turn the phone on, but since then both OTG and MTP/PTP transfer doesn't work. If/when the phone is plugged into a computer, it gives an error and Device Manager shows
"Port_#0001.Hub_#0004 Unknown USB Device (Port Reset Failed)" and I'm not only able to charge the phone with one out the dozens of micro usb cables I have. I've tried several cables and a handful of different computers and OSs (Windows 7,8,8.1,10, Ubuntu 15.04, Kali Linux) all to the same result.
I'm running COS 12.1-YOG4PAS3JL, rooted, and have TWRP installed. The phone doesn't show up when in Fastboot mode or the bootloader either. Nothing changes when I disable or enable USB Debugging as well. With DriveDroid if I set the USB system to "Standard Android" the phone reboots and that seems like the closest I've been able to get to any kind of progress. I've gone through unbricking threads as well as Googled until my fingers bled but I'm yet to find anyone with a similar situation where the phone isn't bricked, the micro usb port isn't broken, I can't pick between MTP or PTP mode (USB Connection just says USB is now disconnected), and I'm not running a custom ROM. I tried replacing the micro usb on the phone so I now know that it wasn't that that's been messed up but I'm not sure where to go from here. Any suggestions or help is greatly appreciated.
I think I'm doing something wrong, the Pixel 2 only works with certain cables, or something else (port defect, OS defect, special drivers needed, etc.). I wanted to transfer some files from my PC (Windows 10) to my phone. I have a USB 2.0 to type-C cable that I plugged in. The phone came up in Windows but the contents of the window were blank. I could not access any contents or view anything on the phone. In Settings under USB I saw it said "charging" so I selected "transfer files" and it disconnected from Windows and reconnected only to go right back to charging. I have locked/unlocked, restarted the phone, tried different USB ports, and nothing works. The only function that works is "charging." When I use the supplied type-C to type-C that came with the phone I can get it to work only if I plug into the computer, then the phone, lock the phone, and then unlock it using my PIN (not fingerprint). I ordered a USB 3.0 to type-C cable to see if that works. Is there something I'm missing on why the phone won't connect with a USB-A to USB type-C cable...except to charge? Drivers or something else?
Also...I've reset the phone once (that didn't work either)...and even tried enabling USB debugging.
Please help. Thanks in advance.
Well...I think I figured it out with more troubleshooting. Apparently, you can't connect this phone to a computer via a USB hub. I was able to get it to work by plugging directly into my computer. I tried it on two different powered USB 3.0 hubs and it didn't work. Not sure why or if there is a way around it for convenience.