Related
Hi all,
After cooking the ROM, I used "ntrw write ger.nb1 f:" to write the file to SD card. Then I used OSimage tool to flash my XDA's ROM but it does not work! Can anyone give an advice???
Many thanks
O2XDAmini,
Please be a little more specific on what isn't working. Do you not get the 'press power to flash' message? Does your screen stays black after the flash? Is the flashing stopped before reaching 100% ? etc etc
Probably you can repair things with the German shipped rom, via usb update.
Regards, M
oltp said:
O2XDAmini,
Please be a little more specific on what isn't working. Do you not get the 'press power to flash' message? Does your screen stays black after the flash? Is the flashing stopped before reaching 100% ? etc etc
Probably you can repair things with the German shipped rom, via usb update.
Regards, M
Click to expand...
Click to collapse
i've managed till 100% but had error showing downloading fail and checksum fail. what could be the problem??
Those two messages always seem to appear, as you can find in the upgrade threads. What happens when you reset, after the flashing has reached 100% and the checksum has been calculated ?
Hi,
Exactly, I did not get the message "press power button to flash". What is your suggestion?
Try making a rom dump with romupgrade first, from your own rom, on the sd. This will overwrite the mbr of the sd. Then put the cooked rom on the same sd with ntrw. Now your magician should see your romimage.
Cheers, M
I did not get the message "press power button to flash&
I had the same problem , the trick is after you read the rom to your sd card and copy it to PC , do not format it . . . just write the edited rom back
to sd card without formating it . Using the known method "ntrw write"
then put your sd card in the magician and go to bootloader , you will get the option to flash
finally..success, just gotta wait a little longer after soft reset and disregard the downloading fail, checksum fail..
For some reason I was having problems with activesync, so I uninstalled it and was going to start from scratch. Now every time I reset the phone, it brings me to the bootloader, and I cannot get out of it. It is the standard tri-color screen, and it shows:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Serial
What the heck is going on here??? It has been working fine ever since I got it and flashed it a month ago. I have a Tilt flashed with the HTC shipped ROM. I was able to hard reset, but after the initial AT&T configuration and restart, bootloader again! HELP me please.
I'm new
I would start by going to the Hermes Wiki cuz they have a good how to unbrick my device section. I read somewhere that holding camera+power and soft resetting with the stylus might work. good luck
So it's bricked? I have done some searching and what I've discovered is that if I can see the bootloader screen than my device is NOT bricked? From what I've seen, bricked means that it is totally unresponsive, and no screens come up whatsoever. I'm confused. Also, how did this happen? The phone was working fine, and nothing has changed...?
All ready try again to flash with original rom?
You mean the Tilt ROM that came with the phone or the HTC shipped ROM that I originally flashed it to?
I really don't understand how this happened. Everything was working fine until today. I've been using this ROM for a month now with no problems.
I will try to re-flash the ROM tonight again - does anyone else have any ideas what might have caused this? Can someone explain to me what bricking is and why it happens? I'm not sure if that is what has happened or not, and I have no idea how to fix it.
More info:
For a split second before it shows the tri-color bootloader, I see a screen that says "No Image File!". It's very quick and I can barely make it out. Does that make any sense?
Also, I have no idea how to reflash since I can't get out of the bootloader screen, and certainly cannot get an activesync connection.
Guys, please help, I'm dyin here.
jackjohnson said:
Also, I have no idea how to reflash since I can't get out of the bootloader screen, and certainly cannot get an activesync connection.
Guys, please help, I'm dyin here.
Click to expand...
Click to collapse
I will try to help you. I'm pretty sure that one of the bootflag bits has flipped. You should connect with MTTY 1.42 (search forum) while your phone is in bootloader. Then type the command readconfig and copy/paste the output here.
Thank you so much jocky - I'm really indebted to you.
Output:
config itemDebugMethod
index0x0, value0x0
config itemKitlIP
index0x1, value0x0
config itemKitlNetMask
index0x2, value0x0
config itemDriverFlag
index0x3, value0x0
config itemDriverLocalZone
index0x4, value0x0
config itemDebugFlag
index0x5, value0x0
config itemPowerSavingDisable
index0x6, value0x0
config itemBootloaderFlags
index0x7, value0x0
config itemRadioDebugFlags
index0x8, value0x0
config itemDriverDisable
index0x9, value0x0
config itemFixedIdleTime
index0xA, value0x0
config itemApSwitch
index0xB, value0x0
config itemConfigDataFlag
index0xFF, value0x434F4E46
Hmm, all normal!
Are you sure the camera button isn't stuck?? Please check that.
Also while in bootloader mode type the command boot and report what happens.
Camera button is definitely not stuck. Seems fine.
Ok, I typed the boot command, and here's what I got:
Cmd>boot
Card inserted
Cmd5 CMD_TIMEOUT
SD 2.0 HC card
SD Init OK
SDFATChkConf: RhOpenFile() failed KAISCONF.txt
OEMIPLInit clear 10MB ext RAM
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage crc of Mini-Kernel:0xC58C631E
OEMLaunchImage 80000000
Jump to Physical Address 10300000
and then it just hangs there...
Any ideas?
Well that's not good. After doing that, I end up on a solid white screen. Then it repeatedly goes to the bootloader screen, and keeps fading out to pink, then to white very slowly. Looks like the lcd is screwing up. All sorts of crazy colors. This is the craziest thing. After I unplug the usb cable, it just goes back to the bootloader again, and looks fine. What the heck is goin on here?
It looks like a bad flash. Something is checked by the bootloader and it decides to enter bootloader mode instead of booting WinCE kernel.
Have you removed both battery and usb cable? After doing that do a factory reset. I remember I've seen that pof wrote something about typing the boot command when the device is stuck in bootloader mode.
And which image did you flash in order to resolve it?
jockyw2001 said:
It looks like a bad flash. Something is checked by the bootloader and it decides to enter bootloader mode instead of booting WinCE kernel.
Have you removed both battery and usb cable? After doing that do a factory reset. I remember I've seen that pof wrote something about typing the boot command when the device is stuck in bootloader mode.
And which image did you flash in order to resolve it?
Click to expand...
Click to collapse
How could it be a bad flash though - this ROM has been working on my phone for the last month flawlessly? I flashed the stock HTC shipped ROM. It has been working great up until today.
Yea I've tried removing the battery and usb cable. But I can't do a factory reset from the bootloader screen - it just goes right back to the bootloader if I try to do a hard reset. Should I reflash, and if so, how do I do it from the bootloader screen without activesync?
This is really not good. Thank you for all of your help btw.
jackjohnson said:
Should I reflash, and if so, how do I do it from the bootloader screen without activesync?
Click to expand...
Click to collapse
That's easy. Download a ROM from here and run the executable KaiserCustomRUU.exe. That should do the trick. Try and report.
So, if I run KaiserCustomRUU.exe, it will allow me to flash a ROM even though I'm stuck in bootloader? I will give that a try if that's the case. I'll be home in less than an hour to try. I'll report back. Thanks.
Yes, no problem. I've got to leave too, catch u later. Good luck!
Re-flash finished successfully, but I'm still stuck at the same bootloader screen afterwards. Ran the boot command from mtty again, and got something different:
Cmd>boot
Fill RSVD information for block 288 to 309
Storage start sector=0x99C0, total sector=0x11900
Storage start block=636, total block=1124
Total Bad Block in CE: 0
Erase physical block from 924 to 2032
formatstorage Bad block found: 1242
si backup: Erase physical block from 2032 to 2048
Do I have bad internal memory?
Another update. After that lockup, I decided to run the boot command from mtty a second time, and got something different yet again:
*****
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0x99C0, total sector=0x11900
Storage start block=636, total block=1124
Total Bad Block in CE: 0
Erase physical block from 924 to 2032
formatstorage Bad block found: 1242
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
*****
So, it looks like it found and fixed bad blocks? Is that possible?
After this, the OS booted and HTC customizations began installing. When it restarted, I was locked at the bootloader screen again. I ran mtty one more time, and ran boot command again
*****
Cmd>boot
InitDisplay: Display_Chip=1
No card inserted
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
*****
This time I didn't get any errors about bad blocks. So it looks good right? Well, not exactly. It appears I cannot boot unless I run mtty and run the boot command. After it boots, everything seems fine.
Does anyone have any ideas why I can boot through mtty but not through a soft reset?
jackjohnson said:
Does anyone have any ideas why I can boot through mtty but not through a soft reset?
Click to expand...
Click to collapse
Once you're booted into the OS, please check your camera key again. Does the camera start after a gentle click?
I have a new (to me) Kaiser, which i tried to upgrade last night with a cooked ROM,( Duttys non Cube, Non-Lite from 4-29-08) going through the soft SPL, Hard SPL, and ROM upgrade painstakingly. Once done, the device powered up, buzzed the AT&T screen, and just continues to cycle from dark to the the AT&T screen- until i yank the battery. When i press camera button and the reset button i get the tri-color screen with: " KAIS1*0 MFG SPL-1.0.01iPof CPLD-8.
i figured the ROM ( copied from a known good source to a thumb drive to my desktop) might have been somehow corrupted, and formatted a micro SD card, downloaded the ROM from this site, renamed it KAISIMG.nbh, pressed the camera button and...the screen goes to tri-color, briefly flashes No Image Found, and then reverts to the tri-color. The AT&T screen cycle persists. Frustrated, but not yet panic-stricken; i read more here and do the MTTY exercise from Pof and get the following output: "Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0x9E00, total sector=0x114C0
Storage start block=653, total block=1107
Total Bad Block in CE: 1
Erase physical block from 942 to 2032
formatstorage Bad block found: 1933
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
FMD_ReadSector+, bad block no=0x4F40, status:0x0"
so, now i am at a complete loss. the unit persists with the AT&T screen cycle, on buzz, partial AT&T display, then dark- and pressing the camera button/reset still gives the same tri-color screen as before.
So, i've managed to take an otherwise fine device and taught it to be as stupid as it's owner. I really need this thing to function for my work, and beg for sage advice. Thanks in advance.
omg, i'm sorry mate. my post is useless for u. just wondering why u didnt flash it via ur pc. it was a nightmare but i'm pretty sure some experts can help u.
original flash was via PC, after i got stuck, activesync cannot see the device, so i resorted to the micro SD to try; hopefully someone with a bigger brainstem than mine can pitch in
actually if u can see tricolor screen, activesync is not needed to flash using CustomRUU. have u tried flashing original shipped rom? just an idea because i also failed to flash so many times long time ago
Tried to go to tri-color screen, connect USB so 'USB' is displayed instead of 'serial' and then flash from CustomRUU utility?
That worked for me when my pc bsod'd during an update.
Similar problem
Have you found a fix for this? I have a similar problem... See my problem.
At your point, I would also recommend flashing back to an original ROM, which can be done from the tri-color screen. To my best understanding, all you need to do is have the Hard SPL loaded, which you do have.
Please update if you find a fix. Hopefully it can help me as well.
I tried some new ROMs (by Tomal, luca16thebig, VNInt...) and after upgraging to Cotulla latest version Uni crashed!
Now it only can boot in to hard reset mode (LEFT softkey + RIGHT softkey + RESET), no another activity. PC can't recognize device.
I tried to disable USB connection in ActiveSync and used Multi TTY/ExitBT. These tools couldn't connect to device (mtty says "\\.\WCEUSBSH001 port can not open").
(Uni in that moment was in hard reset mode)
How can i repair device?
MaximKorobov said:
I tried some new ROMs (by Tomal, luca16thebig, VNInt...) and after upgraging to Cotulla latest version Uni crashed!
Now it only can boot in to hard reset mode (LEFT softkey + RIGHT softkey + RESET), no another activity. PC can't recognize device.
I tried to disable USB connection in ActiveSync and used Multi TTY/ExitBT. These tools couldn't connect to device (mtty says "\\.\WCEUSBSH001 port can not open").
(Uni in that moment was in hard reset mode)
How can i repair device?
Click to expand...
Click to collapse
Go into bootloader mode (on/off button, light button, and reset hole all at once) make sure your sd card is out, and try to flash again with cotulla rom! dont forget to read his instructions to go back to normal roms and allow time for rom to set up, dont hard reset after you flash!!!!
regards
Jay
Yep.
I move out SD (SDHC) and SIM cards.
Tried flash again - when PC program usually show previous version and new version right now it show empty fields. When it start to flash it show "Error 112: CE ROM UPDATE ERROR" message.
When my Uni is bricked I boot into the bootloader with the "Serial"-string. Then I put my SDHC out of the device and then it says "USB".
Every flash worked very well.
I can't force it to show "Serial"-string
Try this
Cotulla ROM is different.Memory allocation is different.
1.Remove SD card and always remove the SIM card.Very important.
2.First uncheck the 'allow USB connection' in active sync or WMDC[if VISTA].
Close active sync/WMDC in task manager.
3.Put Uni in BOOTLOADER.[Power+Backlight+Soft reset].
4.Run mtty.Click on USB.
5.Type 14 0 [ there is a single space between 14 and 0],press enter.
Wait ....
6.Type task 32 [there is a single space between task and 32],press enter
Wait....
7.Type task 28 55aa [ there is a single space between 28 and 55,and no space between 55 and aa],press enter
Wait...
8.When the desktop finishes the work..usually takes 5-10 seconds..close mtty.
9.Disconnect Uni...which is still in BOOTLOADER...
10.Go to active sync/WMDC and check 'allow USB connection'.
11.Flash with a WM5 ROM..I had KDSkamal's Ultimate ROM.
12.You should have got Uni back.
13.Then upgrade it to any ROM you want..6.0,6.1etc...if you want to.
Honestly speaking I don't know what the heck these procedures are,but if you do this STEP by STEP it works like a charm.
Cheers...waiting for your reply.
OK.
Now i know what to send Uni via mtty.
We have a solution to connect tools to device properly (mtty says "\\.\WCEUSBSH001 port can not open") after such crush?
MaximKorobov said:
Yep.
I move out SD (SDHC) and SIM cards.
Tried flash again - when PC program usually show previous version and new version right now it show empty fields. When it start to flash it show "Error 112: CE ROM UPDATE ERROR" message.
Click to expand...
Click to collapse
Will it go into boot loder mode??
Please give info
Okay.
So you mean your device is stuck in---
white screen
Splash image
Bootloader
Or what?
I just like to help out,I just read wiki.
responderman said:
Will it go into boot loder mode??
Click to expand...
Click to collapse
In to hard reset mode (LEFT softkey + RIGHT softkey + RESET) - yes.
In mode, when it show "Serial/USB" connection - not.
kalya said:
Okay.
So you mean your device is stuck in---
white screen
Splash image
Bootloader
Or what?
I just like to help out,I just read wiki.
Click to expand...
Click to collapse
Look (It can be shown only with USB connection):
http://picasaweb.google.ru/Maxim.Korobov/RepairOfHTCUniversal?feat=directlink
And nothing else
Well,at this stage,what happens when you press 0[zero]?
And can you please tell whether you can PUT the UNI in the BOOTLOADER by pressing POWER+BACKLIGHT+SOFT RESET simultaneously?
Because I have read almost all the threads regarding STUCK uni and I never came across one with a screen like yours.
On the second thought...press Backlight+Soft reset simultaneously...what do you see?
The image you are showing us is "Hard reset" what you want is bootloader. you get boot loader as we described above, once you have it in boot loader it is easy to get your uni back. In bootloader it will say serial or USB if it is plugged in at the top and V1.01 or V2.01 or something like those numbers at the bottom on a grey unlit screen.
kalya said:
Well,at this stage,what happens when you press 0[zero]?
And can you please tell whether you can PUT the UNI in the BOOTLOADER by pressing POWER+BACKLIGHT+SOFT RESET simultaneously?
Because I have read almost all the threads regarding STUCK uni and I never came across one with a screen like yours.
On the second thought...press Backlight+Soft reset simultaneously...what do you see?
Click to expand...
Click to collapse
1. If i press zero, Uni show "Cleaning now" message and after about 3 seconds turn off;
2. When i press POWER+BACKLIGHT+SOFT RESET there is no any results. What this keystrokes mean? I didn't know it before;
responderman i can't send command via mtty cause it don't wanna to open USB port.
Man,I am no techie,but really want to help you.
MaximKorobov said:
1. If i press zero, Uni show "Cleaning now" message and after about 3 seconds turn off;
Now,Forget mtty.
First PLEASE charge the battery 100%,use another unit if neccessary to charge.
You said When i press POWER+BACKLIGHT+SOFT RESET there is no any results. What this keystrokes mean? I didn't know it before
What do you mean by that.
1.You cannot enter the bootloader
or
2.You don't know what the bootloader is?
And did you uncheck usb connection in AS,remove SD and SIM during MTTY....just to be sure
And finally PLEASE read this thread...It is really helpful..though old.
http://forum.xda-developers.com/showthread.php?t=259003&highlight=universal+dead+stuck
Click to expand...
Click to collapse
"1.You cannot enter the bootloader"
But now... it's funny miracle.
I try POWER+BACKLIGHT+SOFT RESET again and it's go into bootloader (previously - no, just empty screen).
5 minutes and new rom installed successfull.
Thanks you guys!
It was very bad half week with a brick.
Well i'm glad we got there in the end. Can I recomend reading up in the WIKI to get to know things a bit better. Welcome to the forum
Glad to help!
Good to hear that.
And yes please search,read wiki,and please please name your threads in such a manner so people can understand what it's really about.
And I am glad this thread can be closed now.
I have sold my uni and the guy that bought it from me is not happy with the cotulla rom that I have installed becouse he can not connect to wifi!
So I followed the instructions on how to uninstall, but something somehow went wrong!
Here is the instructions I followed:
Uninstallation
1. You should able to use MTTY program for uninstallation.
2. Go to bootloader (Power + Lamp + Reset)
3. Run commands:
Code:
task 32
task 28 55aa4. Wait
5. Now you should reflash original WM50 rom.
6. Now you can install something else if you want.
Everything seemed to be fine, but the problem is that I can not flash the original (or any other!) uni rom for that matter!
In fact, I can not even boot into the uni anymore!
I can enter the bootloader, but as soon as I try to reset the device it just blacks out!
When trying to flash another rom I get the error: 112 problem!
I am running windows 7, but that should not be a problem becouse I used it to flash the cotulla rom before!
Is it possible to somehow flash from sd card, or can I do anything else to get the original rom in there?
I have no trouble searching the forum and have done that many times before. However this time, I can not do that becouse the person is here with me, and I need it fixed ASAP!
So please, anyone that can help me with either a link to the solution or a step by step?
I would appreciate it very much!
Thanks in advance guys!
branko.savic said:
Code:
task 32
task 28 55aa4. Wait
Click to expand...
Click to collapse
The second command should be task 28 55aa.
Sometimes i had trouble doing doc format after cotulla rom,i had some error,and what i did is that i typed task 28, and it helped.
basically what i did is:
task 32
task 28
task 28 55aa
after that all worked perfect,no error.
I hope that helps
PalDragan said:
The second command should be task 28 55aa.
Sometimes i had trouble doing doc format after cotulla rom,i had some error,and what i did is that i typed task 28, and it helped.
basically what i did is:
task 32
task 28
task 28 55aa
after that all worked perfect,no error.
I hope that helps
Click to expand...
Click to collapse
I tried it, no luck!
Everything seems to be fine, but when I reset the device I still get a black screen, just like if the device was turned off!
branko.savic said:
I tried it, no luck!
Everything seems to be fine, but when I reset the device I still get a black screen, just like if the device was turned off!
Click to expand...
Click to collapse
Is there a way toflash the device without having to use the usb connection?
Can I flash using the sd card?
Or can I flash somehow trough the mtty?
Appreciate all help, the guy went home and left me with the device so I still have to figure this out till tomorrow!
Thanks!
I suppose it is in bootloader mode now. If not, go there...
Disconnect the USB cable and connect the device once again. Run the MTTY.
Type the following commands line by line (do not use copy paste):
set 14 0
task 8
regards
tomal said:
I suppose it is in bootloader mode now. If not, go there...
Disconnect the USB cable and connect the device once again. Run the MTTY.
Type the following commands line by line (do not use copy paste):
set 14 0
task 8
regards
Click to expand...
Click to collapse
Ok so I did like this:
USB>task 14 0
task 14 0
USB>task 8
task 8
At task 8 I got a USB connection error, and the task never finished!
Oh, and the device went blank again!
Pressing the two action keys and reset, presents me with the restore screen, but pressing either 0 or X and device is black again!
This is getting really frustrating now!
The ROM I am trying to install is the original shipped rom with the device! (Swedish I-mate JasJar) and is an installation file, not a custom rom! Maybe this is where I am going wrong?
branko.savic said:
Ok so I did like this:
USB>task 14 0
task 14 0
USB>task 8
task 8
At task 8 I got a USB connection error, and the task never finished!
Oh, and the device went blank again!
Pressing the two action keys and reset, presents me with the restore screen, but pressing either 0 or X and device is black again!
This is getting really frustrating now!
The ROM I am trying to install is the original shipped rom with the device! (Swedish I-mate JasJar) and is an installation file, not a custom rom! Maybe this is where I am going wrong?
Click to expand...
Click to collapse
No, it is not frustrating. You just finished the 1st step.
Now set your device in bootloader mode again and flash any rom you want. It will be then back to business.
branko.savic said:
Ok so I did like this:
USB>task 14 0
task 14 0
USB>task 8
task 8
At task 8 I got a USB connection error, and the task never finished!
Oh, and the device went blank again!
Pressing the two action keys and reset, presents me with the restore screen, but pressing either 0 or X and device is black again!
This is getting really frustrating now!
The ROM I am trying to install is the original shipped rom with the device! (Swedish I-mate JasJar) and is an installation file, not a custom rom! Maybe this is where I am going wrong?
Click to expand...
Click to collapse
One update, I am getting the connection error: 101 from the original uptade utility now after doing the last two commands!
Hope this helps!
tomal said:
No, it is not frustrating. You just finished the 1st step.
Now set your device in bootloader mode again and flash any rom you want. It will be then back to business.
Click to expand...
Click to collapse
Thanks for all your advice, but I still cant get it to work!
I always get the connection error, the strange thing is that mtty is working just fine!
I even found the file "UNI_ExitBootloader.exe" but it cant connect to the device either!
I read somewhere that there is a upgrade utility that will try to upgrade without first checking device ID, or something like that! But I cant find it anywhere!
So anymore help on this, would be greatly appreciated! If not, I am affraid I have to give the money back, sense I can not figure this out!
Thanks in advance!
branko.savic said:
Thanks for all your advice, but I still cant get it to work!
I always get the connection error, the strange thing is that mtty is working just fine!
I even found the file "UNI_ExitBootloader.exe" but it cant connect to the device either!
I read somewhere that there is a upgrade utility that will try to upgrade without first checking device ID, or something like that! But I cant find it anywhere!
So anymore help on this, would be greatly appreciated! If not, I am affraid I have to give the money back, sense I can not figure this out!
Thanks in advance!
Click to expand...
Click to collapse
I suppose device behavior is normal.
You're getting blank screen because you already formated the DOC (using task 28 55aa). You need to flash a rom now.
1. Close all running application in your XP PC (better do a restart of your PC)
2. Set the device in BL mode and connect the USB cable (do not use USB hub)
3. Open the Device Manager at your PC. Check if you have something called Microsoft or HTC USB Sync under Portable/Mobile devices.
4. Flash any of my ROM (my RUU shouldn't check your CID)
5. Do a hard reset after flashing
Win7 and flash or other tools
This Week End I managed to try to flash using my brand new win7 machine.
It failed and I got my Uni stuck in bootloader mode
even mtty or uni_exitbootlaoder did not work.
Then I realized there was a trick with Vista, and I use the same.
Plug your Uni,
go to system management -> device manager
go to change driver for "mobile device" -> usb sync
and force manual install of the XP driver (somewhere in that forum there is a small zip file that contains the driver and the exit_bootloader tool)
you can find procedure and files here : http://forum.xda-developers.com/showthread.php?t=313001
And it works like a charms, I could exit booloader mode, flash the tomal v10...
Everything is fine
tomal said:
I suppose device behavior is normal.
You're getting blank screen because you already formated the DOC (using task 28 55aa). You need to flash a rom now.
1. Close all running application in your XP PC (better do a restart of your PC)
2. Set the device in BL mode and connect the USB cable (do not use USB hub)
3. Open the Device Manager at your PC. Check if you have something called Microsoft or HTC USB Sync under Portable/Mobile devices.
4. Flash any of my ROM (my RUU shouldn't check your CID)
5. Do a hard reset after flashing
Click to expand...
Click to collapse
I cant thank you enough!
Using XP did the trick, and I used one of your roms in the device!
Now everything is working as should!
Thanks again for all of your help!
Blank White Screen After Hard Reset
Here is my story:
My SPV M5000 was left turned off for a looong time with battery attached. As I remember there was an original Orange ROM. Recently I decided to reincarnate my Uni, but without success - old battery wont charge... When inserted new one, the result was the same - no charging light, not booting. Then tried hard reset and for a few times I saw text on the screen but pressing '0' turned off screen immediately each time. And suddenly i received nice white blank screen. In bootloader mode it was black nice as well - no Ver., no USB. After a sailing all over the Unis WIKI, i made mtty tricks with task 32/ task 28 /task 28 55aa and flashed an original ROM again. Now It charges, I can HardReset and put in Bootloader mode, I hear a sound , Keyboard is Active, but the screen remains BLANK WHITE after H.R. Hope, there is a trick that i didn't know how to .... Thanks for your help.
vitoox said:
Here is my story:
My SPV M5000 was left turned off for a looong time with battery attached. As I remember there was an original Orange ROM. Recently I decided to reincarnate my Uni, but without success - old battery wont charge... When inserted new one, the result was the same - no charging light, not booting. Then tried hard reset and for a few times I saw text on the screen but pressing '0' turned off screen immediately each time. And suddenly i received nice white blank screen. In bootloader mode it was black nice as well - no Ver., no USB. After a sailing all over the Unis WIKI, i made mtty tricks with task 32/ task 28 /task 28 55aa and flashed an original ROM again. Now It charges, I can HardReset and put in Bootloader mode, I hear a sound , Keyboard is Active, but the screen remains BLANK WHITE after H.R. Hope, there is a trick that i didn't know how to .... Thanks for your help.
Click to expand...
Click to collapse
Hi!
Just try a cooked version (by Tomal or any other chef). This will turn your device alive. As far as the original version .... the problem of white screen do happens ... why? I don't know but the cooked versions can be installed and work fine.
May be a CHEF throw some light on it, the same happened to my Orange SPV 5000 and so far I am not able to install the original Orange WM5 on my device.
Regards,
Haque