As the title says, I seriously think I am just being stupid. But I have just spent the last 5 hours searching, trying, and just about anything I can. But I can't seem to get anything to work.
Now on to my situation:
I just got a new Tilt, it is not my first. My first one was when it first came out for AT&T. So it was still the WM6Pro and I SIM CID and HardSPL'd it. So I do know how to do this stuff. Just now with this new one, it must be a newer one, because it came with WM6.1 on it.
Here is what I know I have on it. Bootloader shows this.
KAIS1*0
SPL-3.56.0000
CPLD-8
And this is when the AT&T logo pops up.
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Now the first thing I am trying to do is HardSPL it.
I swear I have tried everything.
First thing I tried was the simple, Kaiser SIM/CID Unlocker & Changer , I start with the Flash-HardSPL and get to the Bootloader saying USB with the Rom updater showing the status bar. Then with the phone still in bootloader, I get Error [260] : Connection, The Update Utility cannot connect to your PDA. and so on.
So I exit that. Go on to the next try.HardSPL v3.07-3.56
All of them end up as the same result as the first. But I will explain what V3.28 as I have heard and read that that is one of the best ones to use.
Get to bootloader, Computer monitor shows status bar, and phone shows status bar. And I wait for it to do anything and then maybe a minute or two it gives me an error. Error [262] : Update Error, The ROM Update Utility has encountered communication errors during the update process. and so on for recovery.
I've also tried to do the HTC Kaiser Hard-SPLv1 - CID Unlock & Flash any ROM to your device (4 free)
When I start this one up it gets me to my screen being completely white. and I can not continue after that without taking the battery out and starting the phone again.
I have also tried other things that I just cant remember right now, cause I have been trying to do this for so many hours, and downloaded so many different things. So if you can and may help me, anything and everything will be appreciated beyond the gratitude I can give. Once again, I do know what I am doing, but I do not know what I am doing ARGHHH! lol.
I think you need JumpSPL1.56-KAIS, then hardspl , Im assuming this because you didnt say you did this step in your post.
Read post #2 here http://forum.xda-developers.com/showthread.php?t=396922
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236
sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236
Click to expand...
Click to collapse
I tried that one, and for 2nd poster, I did try that also. Sorry for not listing. But I still appreciate the help guys.
I was also thinking I had to go back to 6.0 but I went 55 pages back on this section of the forum, and I still cant find it. I'm still looking, but it seems like a dead end to me. =/
there was a guy having this issue a while back, look in the white screen thread towards the end! I will see what I can find for you!
Right now I found a 6.0 ATT rom, so I got that to work, now I will try unlocking it, thank you guys, and thanks to this post (70+ pages back!) http://forum.xda-developers.com/showthread.php?t=326933
Edit 1 :
Alright I got it back down to 6.0, but yet I still cant do anything with HardSPL, CID, or Security. If anyone has any solutions I will listen! Even if its bashing my head against anything! LOL! Sucks!
downgrade I don't believe is necessary
sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236[/quote
Nope, I didn't have to. My tilt came with 6.1. I had some problems, ended up switching to an XP laptop, was using Vista(prem. sp-whatever). It's too late here, but maybe tomorrow I can figure out what I did, but I think the main thing was using a windows XP pro machine - don't know if it needed to be pro, but that's what I had. Thereafter I've used the vista machine without problem. Good luck.
Click to expand...
Click to collapse
Meh, you need to use JumpSPL first. I've had this happen before, and JumpSPL cleared it right up for me.
I think Jocky has a few you can use. Check his HardSPL thread.
I first tried to use Vista, but then went back to my xp machine.
Edit :
I've tried to the JumpSPL but had major brain damage last night. trying it again with a fresh day. Will let you know.
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!
Yeah, well I can NEVER find anything via search here. Hell, to prove that point, I just typed "stupid" in the subject search line and found: NOTHING!!! I don't know what the deal is, but I've just pretty much given up searching this site.
Which leads to more reading than I'd typically care to do.
J
Munchys said:
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!
Click to expand...
Click to collapse
Glad to hear you got it fixed.
Awesome, fully got it unlocked and everything! Thanks for telling me what I might have missed and messed up on!
Related
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
CID locked!
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.
everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man
Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...
Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan
Hey........i found the link and also downloaded it.......thanks for the info
i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok
I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Hi,
Was changing the ROM on my Kaiser, using JUMPspl as I had got the white screen using Hardspl. During the upgrade got an error at about 18%, went through the recovery procedure only to get back to the Bootloader screen with the screen saying
SPL-1.93.0000
I think it should say something different here!
At the moment can only get the the tri-colour bootloader screen with usb at the bottom.
Please any help would be much appreaciated.
Thanks
If you are at the tri-color bootloader screen, reflash a ROM.
that's where the process starts at anyhow,the bootscreen.
But doesn't the SPL have to be either Hardspl or jumpSPL.
I have tried to do the rom update again but sticks on 0% and gives error 262
Alemaker said:
If you are at the tri-color bootloader screen, reflash a ROM.
that's where the process starts at anyhow,the bootscreen.
Click to expand...
Click to collapse
Not advisable if he has the default SPL still though which by the number appearing at the tri col screen it appears to be the case.
Try doing a hard reset and see if it boots into the original ROM then at least you will find out if it is bricked or not, however, i'm not sure it will work based on the fact you got part way through in the first place.
Hold down the keys directly next to the Send and End (green and Red) Hold in the stylus and keep them all held untill you get a screen telling you to press the green (send) key.
Tried the hard reset, takes me back into the bootloader. Any other ideas?
Hmm... ok then.... you are pretty much looking at a very expensive paperweight at this moment in time then.
Look at this thread...it "may" (i'm not promising anything but it may point you in the right direction) help you out. Let us know how it goes.
http://forum.xda-developers.com/showthread.php?t=361612&highlight=bricked
cmcmill01 said:
Hi,
Was changing the ROM on my Kaiser, using JUMPspl as I had got the white screen using Hardspl. During the upgrade got an error at about 18%, went through the recovery procedure only to get back to the Bootloader screen with the screen saying
SPL-1.93.0000
I think it should say something different here!
At the moment can only get the the tri-colour bootloader screen with usb at the bottom.
Please any help would be much appreaciated.
Thanks
Click to expand...
Click to collapse
Hate to joint the parade, but the exact same thing happened here - 18% now stuck at 1.93.0000
For anyone else reading this BEFORE flashing a new ROM please read, read and read again EVERYTHING related to flashing on this site, wikis and wherever else you can get info.
Another idea for you. Search around here for how to flash from an SD card that may solve the issue out for you. As previously noted though....READ READ READ and be 110% certain you understand what you are doing before you do anything.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=stuck+bootloader
details some info for a Wizard, should it be the same for a Kaiser?
Will Mtty get me any further?
MTTY will at least give you a USB connection to the device it is worth a shot given your current situation.
There is hope!
I did a clean reboot of my PC and disabled my antivirus (avast) and was able to sucessfully reflash the new 1.62 rom (released from ATT site today).
Thanks will try the new 1.62 rom.
What commands can you use with MTTY?
tried the At&t rom gives me an error on the vendor id. Will try a HTC rom
I have tried multiple roms and they all give me the same error Error 294:Invalid Vender ID
Any ideas
Am starting to get worried because if the misses finds out that I have bricked the new phone, I am up to my neck i it.
If you are stuck in boot loader & would like some help via MSN Messenger, please PM me or look for me on MSM messenger at [email protected]. I will be available to help later this evening or tomorrow morning.
I have most of the files to fix these issues & can use MSN fileshare folders to help you.
Good chance that you can be up again in a matter of minutes
cmcmill01 said:
I have tried multiple roms and they all give me the same error Error 294:Invalid Vender ID
Any ideas
Am starting to get worried because if the misses finds out that I have bricked the new phone, I am up to my neck i it.
Click to expand...
Click to collapse
Invalid Vendor I.D. is cuz it's locked.
Had the exact issue myself and found a ATT ROM that will boot. It saved me bigtime, so I saved it. It's in one of the posts on one of the threads but I have the actual ROM, it'll overide that lock.- PM me if ya need it.
Got the same solution, Holy S**t about to have a heart attack. Tried nearly ever ROM out there, it was the Asia one that got me going.
Lesson learned: make sure you Hardspl after jumpspl.
Thanks for all the help folks
Glad ya got it fixed. One quick question?
Is your original ROM ATT or HTC ?
It is a HTC ROM. Done My Hardspl and got Sleuth v3.0 on it already
Happy days
Help!!! I attempted to flash my tilt. installed and ececuted Jump spl1. ran v3 sluth progress bar got to 19% then error. now I cant get anything except 3 color mode. Is there something I can do or is my ne phone now a brick?
did you install hardspl first?? and why are you using jumpspl to flash a rom.
anyway just try and install an original shipped rom, and see if that fixes that if not, gsleon3 will come by shortly and offer you his services, if you're nice........if you're not, put on some flame retardant pants cause we'll unleash p1tater on you
bmwdiver said:
Help!!! I attempted to flash my tilt. installed and ececuted Jump spl1. ran v3 sluth progress bar got to 19% then error. now I cant get anything except 3 color mode. Is there something I can do or is my ne phone now a brick?
Click to expand...
Click to collapse
Let me guess...... You were not invited to search these forums?
I tried installing hardSPL but kept getting stuck at error communicating with device so after reading Multiple post with similar problems Installed Jump to the device and ran it. I then tried HArd SPL again with no luck. I was trold that it was unneccessary and that I shouldnt have a problem with the newer version of sluth but alas this is where I am at now.
Thanks
Found this after a quick check of the Essential links thread in upgrading.
http://forum.xda-developers.com/showthread.php?t=371154
thx.
sluth
Another noob bites the dust
Another noob bites the dust hey hey
Why oh merciful God, why? Please make it stop!
I will help you. IM me @ ([email protected]). You'll have to swear on your first born never to do anything stupid witout reading first, ever again though.
WHO IS THE BLOODY ****HEAD THAT TOLD YOU HARD SPL WAS UNNECESSARY??
noob please take note
ALWAYS INSTALL HARDSPL FIRST BEFORE INSTALLING ANY ROMS
Apparently i cannot follow instructions otherwise i wouldnt be in bootloader
I wanted to install one of duttys new rom(whatever his latest one is).Read about doing hard spl.Pofs all in one trick didnt work for me because i was getting a white screen so i went to jockys thread and i had thought i had did everything ok.Currently i am stuck in BL with
kais1*0
SPL-1.93.000
CPLD-0
running windows xp2
So what do i do know , do i look for a stock at&t rom?i thought i read somewhere you theres a recovery mode to reload stock rom?suggestions would be appreciated , thanks!
if anyone has msn if they could add me on msn at [email protected] and give me a little bit of their time i would appreciate it.Let me know what other information is needed.
if u cannot follow instructions then u shouldnt be doing what ur doing
have u successfully completed hardSPL??what steps have u taken?
yea what happened was i was around 25 percent with duttys rom and my friggin little puppy came in rampaging and demanding yo play and he yanked out the usb cable from the computer , im reflashing it now so wish me luck
Hope you didn't brick it.
DJSYNTHVIRUS said:
yea what happened was i was around 25 percent with duttys rom and my friggin little puppy came in rampaging and demanding yo play and he yanked out the usb cable from the computer , im reflashing it now so wish me luck
Click to expand...
Click to collapse
I'm not trying to be a **** but you gotta follow all the instructions to the T or your gonna brick your device. You gotta HardSpl before anything else, this is what helps you from bricking your device. Did you read the Wiki's at all? There is tons of helpful info in them. or even look HERE some good stuff there too. Gotta research till you can't take it anymore... then do some more, then do the fun things and you won't jack your stuff up.
youreright mt fault but theres a first time for everything and i made it and daaaaaaaaaaaaayum is duttys rom sexy
I highly suggest you don't flash another thing. You'll be contacting me soon, I feel. Anyway, according to your first post, you don't have HardSPL. Flashing without HardSPL, particularly rodios for some reason, have a tendency to create issues, some serious. I highly suggest you HardSPL.
DJSYNTHVIRUS said:
kais1*0
SPL-1.93.000
CPLD-0
Click to expand...
Click to collapse
Is this not the jumpspl? If that is the case, you my friend are playing with fire.
P1Tater said:
Is this not the jumpspl? If that is the case, you my friend are playing with fire.
Click to expand...
Click to collapse
That is the new MFG SPL for the Tilt. It seems he lucked out & the rom he flashed matched the CID of his device, or it's already CID unlocked.
GSLEON3 said:
That is the new MFG SPL for the Tilt. It seems he lucked out & the rom he flashed matched the CID of his device, or it's already CID unlocked.
Click to expand...
Click to collapse
ahhh. thank you.
Hello,
I've tried flashing my Kaizer by all different ways I could, but no way to make it work. I've downloaded a lot of different ROMs (Alex, Dutty, VIET, etc), but I always get stuck in the same point. Either in Vista or XP, RUU always stops with ERROR [262] and the phone after the three-color screen, get in blank with a bar in 0% and gets stuck.
So, I've tried flashing via microSD. No better luck on that; even using different SDs, I always get stuck in a Loading... message in the phone, and nothing happens.
I've read a lot of forums and done all suggestions such as not using Anti-Virus, Firewall, etc and formatting SD as FAT32.
One interesting thing is ActiveSync (and WMDC in Vista) simple "dies" after the phone goes to the Three-color screen so it sounds the "new hardware found" sound but no new hardware seems to become available. I always can soft reset it and my old ROM (and configs) come back, so nothing seems to be done to phone's ROM.
This Kaizer was bought in the US (Amazon.com), unlocked, in Feb/08. I had some rare Freezing Problems on it (freezes while idle).
Today's config:
WM 6 Professional
CE OS 5.2.1620 (Build 18125.0.4.2)
ROM 1.82.721.0 WWE
Radio 1.27.15.32
Thank you in advance for any ideas on flashing this phone.
Regards. RB.
I'm assuming you've RTFM'd, but nowhere do you mention that you have installed Hard-SPL.
http://forum.xda-developers.com/showthread.php?t=334679
Done?
You should probably do more research and reading. Start with the Wiki and specially HardSPL search for it. The answers are in here you just need to search. Welcome to the forum and this is not a spoon fed forum but rather put your time in the research before you brick your phone. HOPE YOU WON'T GET FLAMED....
What about HardSPL?
Thank you for fast replies.
I've also tried HARDspl, my efforts went there when nothing worked. I could make HARDspl run some code in my phone (had to hit "Continue" on phone's screen), but I got a freeze blank screen instead of the Three-color/USB screen.
So, I've forced the Three-color screen by reseting the phone (and got the USB sign), but the HARDspl's updater got, again into ERROR [262]. Ok, I didn't believe this was goig to work anyway, but tried it (considered safe to try).
I have tried HARDspl from a Vista PC, I'll try again from a XP box. I'll also read more on HARDspl.
So, as you can seen not even HARDspl seems to be workimg in my case...
Thanks. Regards. RB.
sigh.......why do i even bother.........
HardSPL will not install - WHITE SCREEN: SOLVED
try to guess where i found that link
rfbrandao said:
Thank you for fast replies.
I've also tried HARDspl, my efforts went there when nothing worked. I could make HARDspl run some code in my phone (had to hit "Continue" on phone's screen), but I got a freeze blank screen instead of the Three-color/USB screen.
So, I've forced the Three-color screen by reseting the phone (and got the USB sign), but the HARDspl's updater got, again into ERROR [262]. Ok, I didn't believe this was goig to work anyway, but tried it (considered safe to try).
I have tried HARDspl from a Vista PC, I'll try again from a XP box. I'll also read more on HARDspl.
So, as you can seen not even HARDspl seems to be workimg in my case...
Thanks. Regards. RB.
Click to expand...
Click to collapse
Do a search for HardSPL white screen. There's a thread in this very forum about it freezing on a white screen.
I think I remember some issues with it on Vista, but I don't have Vista, so I don't pay attention.
You must HardSPL first. Search for HardSPL and whatever issue you're having, and I bet you can find a resolution and have it unlocked inside of ten minutes.
Xtreme_G took the time to search and post a link, and still managed to beat me to it. Bastard.
i guess you need a heavy paper weight so keep flashing without installing hardspl or without reading and searching ...
XtreMe_G said:
sigh.......why do i even bother.........
HardSPL will not install - WHITE SCREEN: SOLVED
try to guess where i found that link
Click to expand...
Click to collapse
Thanks alot, i was taking a swig of mt.dew as i was glancing at your reply, thanks to you its coming out of my nose.
let me guess, you were a previous iphone user?
I'm feeling nice. Your answer is here. It will fix all of your problems.
P1Tater said:
I'm feeling nice. Your answer is here. It will fix all of your problems.
Click to expand...
Click to collapse
This is beautiful. Definitely solve this problem. ROFL
there's no problem that rick cannot solve
I could flash the phone properly now. HARDspl was the key.
Thank you guys for the support.
RB
P1Tater said:
I'm feeling nice. Your answer is here. It will fix all of your problems.
Click to expand...
Click to collapse
==
rfbrandao said:
I could flash the phone properly now. HARDspl was the key.
Thank you guys for the support.
RB
Click to expand...
Click to collapse
Rick saves the day again.