Related
Hi guys i'm pretty new in this scene and i did something stupid...
i've downloaded Win Mobile 6 from usenet and installed it without reading
anything. At 95% of the installation it hangs and when i try to recover it doesnt work. Now i only have the screen with the green red and blue at the background. I've tried a hard reset but that doesnt work either and i tried to search by google and found nothing.
Am i right that i had to remove some kind of G4 lock? And does somebody know how to help me getting things started again.....
thnx in advance.
greetz
JohnGotti
do your carriers flash and let it fully finish. Once thats done, read a little on making sure your device is unlocked and once you get that done, youll be ready to move to the next level.
what your device is g3 or g4?
how do i perform such a flash and how can i see what kind of G3/4 i have??
If you got a G4 or G3 IPL/SPL 2.x:
Try flasing wizard_love rom from the bootloader screen.
If you got IPL/SPL 1.x:
flash button_rom from the bootloader screen.
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
JohnGotti said:
damn thats a whole mouth full and i dont get it how its intended.....
perhaps you can tell me in dutch or in a language a stupid fool can understand
Click to expand...
Click to collapse
See you're private messages!
ok thank you
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
ady_uaic said:
i have the same problem..and i've tried all versions,RUU_mUn_aRTM_10_2_0_8_WWEx.exe, Wizard_Love_2[1].26.10.2_WWE_Novii_CF2.exe, Molski[1].Biz_AKU3.3_21911_8MB_Crossbow.rar...and now when i open it, shows me for 1 second the bootloader screen, and then it's shutting down himself..what should I do???
Click to expand...
Click to collapse
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
this happened to me once, i almost had an heart attack.. but anyway.. what u get there is the bootloader mode, which is you can still save the phone.. when this happened to me, all i did was, i upgraded to original tmobile rom, and from there i ve used shell tool to upgrade to wm6 (my wizard is not unlocked but shelltool takes care of that and u dont have to worry).. its really easy.. let me know what happened.. no worries
Dont worry guys... I think most of us here, faced the same things before, Me included.
Everybody here is quite nice and will help u in any way we can..
Just do some research and fact finding before u flash your rom..
One of the article that I think is very helpful to me is Dr P post on how to unlock and flash your wizard.
If you have any problem or question after reading that, just ask.
Hopefully u can find your answer and your wizard are all healthy..
mfrazzz said:
You should provide more information... What phone model is this? Is it a G3 or G4? What is your IPL / SPL? What did you do before this started happening? Was the battery fully charged before you started this process? Did your PC give you errors when you tried to do teh initial flash that started this process?
The more information you provide the better we can help.
If your phone won't stay turned on when its on the bootloader (rainbow screen) then either your battery is almost dead, or you may have bricked your phone. But we need more details.
Click to expand...
Click to collapse
my phone is G4...first, when i tryed to change the rom, on 95% was blocked..and i have wait about 20 minutes, and nothing...the spl is....01...the battery was quite full, but after several tries, i don't know now how it is (i supose to be from the battery, but i still need a very good rom for it)
ok.. here are the steps.. its very easy.. i had the samething..
your phone is probably CID locked and you will need a shelltool to install that ROM.. so what you need to do is just download the original tmobile ROM.. and connect the phone and install the original ROM.. You didnt birck the phone because you get the bootloader screen.. which means, you can still save the phone..
anyway.. connect the phone via usb and install after you install the original wm5, download the shelltool from here and follow the instructions.. and install the ROM via shelltool.. Then you should be good to go with the new
wm6.
http://forum.xda-developers.com/show...ght=CID+unlock
ok, but where can i get that original rom?
rom
ady_uaic said:
ok, but where can i get that original rom?
Click to expand...
Click to collapse
if you cant get the tmobile rom
use the wizard love rom you can get it from here http://rapidshare.com/users/EXGZ7T
flash this rom not using the shell tool once flashed the use the shell tool following all the instructions and it should work
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
ady_uaic said:
now i've installed RUU_mUn_aRTM_10_2_0_8_WWEx.exe (i've tried and that version also, but same situation) and after reflashing, it shows me windows mobile screen, and then restart the phone...what should I do??? i've tried many roms...could someone please give me an original rom, in english?
Click to expand...
Click to collapse
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
mfrazzz said:
Simple: Go to the Wizard Upgrading forum and in the stickies is a post by Dr. Putingham on how to CID Unlock your device. Scroll to the bottom of the first post and there is a direct link to pull the Tmobile 2.26 official ROM.
But as EasyMob suggested (and gave a link to) you may be better off with teh Wizard Love rom since you are a G4 device. Wizard Love ROM is very good at recovering G4 devices.
Click to expand...
Click to collapse
OK..I'm agree with you, but please understand: I've tried that version too...same situation...please give me the link with the Tmobile 2.26 official ROM
ady_uaic said:
please give me the link with the Tmobile 2.26 official ROM
Click to expand...
Click to collapse
If you read my previous post, I gave you exactly how to find the link (Hint, its in the first post of Dr. Putingham's sticky in the Wizard Upgrading forum and the title is about How to CID Unlock your device. Was that too hard?
i believe you, but i can't find it...and about 3 days i'm hopeless, because with any ROM version, the phone is still restarting, after reflashing (i didn't flash it with tmobile original rom)...please please, give me the link of the topic...
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
CID locked!
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435
enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.
everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man
Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?
joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...
Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan
Hey........i found the link and also downloaded it.......thanks for the info
i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok
I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
Read the SQL Questions thread in the Wiki. It will explain a lot of this to you.
In short, any HardSPL will allow you to flash, it's just the 3.* ones are more compatable with the latest WM6.1 builds.
EDIT:
Normally I'd flame you for this, but Im already flaming another noob atm That doesn't mean someone else wont flame you later.
Ta
Dave
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
If you are able to flash a ROM onto your device, then you must have an UNLOCKED phone. For simple instructions on upgrading to the new SPL I suggest you visit the following :
http://forum.xda-developers.com/showthread.php?t=398565&highlight=step
Good luck.
Well I am sure I am gonna get flamed for this post, but here goes....
BTW "I AM NOT MOANING OR PICKING FOR AN ARGUMENT" I know this info here is given as is and appreciate the time people spend putting it all together
For the noob there is a trillion things to read here all of which lead to another trillion things which lead to ......
This phone flashing is all new to me and as I paid £434 for it I dont want to brick it, a term along with many I have never heard of before coming here.
I digress...
Anyway after reading and trying to understand it all I have flashed my phone and it works a treat and I am happy, just still in the dark about many things.
The thing is as a noob it is extremely daunting to start to read a thread, wiki etc to try to understand about a topic which diverts you to threads which divert, divert, divert so that after 3-4 diversions you foget what it was you were readiing about to start with!
And then you get to the point....I dont understand this...should I post lest I get flamed.......
So basically from a noobs point of view....everyone was a noob at some point, be gentle with us!
OK.....let the pachjo bash commence...........
Not a flame, just my way of working...
You raise some good points about the amount of info here. But like most here I managed to flash my device without posting a single new thread. If I had a problem with a step I posted there.
_Alex_ has consolodated most info into the single sticky. And there are step by step guides and FAQs on the Wiki.
I just took it one topic at a time:
*Found a ROM, said I needed HardSPL.
*Found HardSPL, installed it.
*Flashed ROM.
*No sound, found thread explaining about Radios. Flashed Radio.
*and so on.
I was (and still do) always reading thread that I found related to me learning as I go and helping where I can. I too like you knew nothing when I first joined and no one minds "noobs" asking questions in the relevant threads when they get stuck, but this is ROM development forum. All new threads should pertain to ROM "development".
Ta
Dave
you must use (aka JumpSPL )file before changing the SPL
this jumber must be in your device before flashing the new hard SPL
see hare and read carefuly :
http://forum.xda-developers.com/showthread.php?t=396922
got it from here also
http://forum.xda-developers.com/showthread.php?t=354061
cheers
Thanks guys.....am reading away and will take onboard your comments
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
thomassster said:
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
Click to expand...
Click to collapse
Yep... I shall do that!
I have gone flash crazy as I am now gonna whack on L26_KaiserDiamond_V9
I am amazed at how fast my apps are loading now I am no longer on the stock ROM!
The phone reception is better, the SRS WOW is fandabbydosey its all good for me, and I have fixed (well found the solution to at least one of my gliches also)
hi guys i know u will say use the search button,but ive done all that and still lost.
i downloaded l26 rom and now do i just install it after ive got the sbl thingy or what has it tto be. its totally different to the exec way.i got a little bit scared when i was reading all about the problems.did it with the exec but the stellar is brandnew and worryed i might bugger it.
cheers in advance
Hi, i have the stellar from O2 as well and have sucessfully flashed many roms, first though you need to use JumpSpl to load HardSpl booter then flash the hardSpl system file which will prevent bricks, this is relative safe. Make sure you have the latest HardSpl for newer roms because some wont flash properly otherwise. I use Duttys new 1.6 rom which is fast and stable. First read the stickies
SSPL and all the techie stuff:-
http://forum.xda-developers.com/showthread.php?t=396922
Use v3.56
Guide to kaiser and rom cooking etc
http://forum.xda-developers.com/showthread.php?t=369282
Then have fun flashing new roms.
right sooo i download jumpspl to stellar then hardspl,open and job done then i can drop on a rom like doing the exec.sorry for being so bloody thick.lol
wish we could have a thread like...
download this file ++++++++ to device then open then do x,y,z
instead of ...
download this link to here then open this here unplug phonethen plug back in and so it continues.making the instructions easy would i think stop all the worrying and asking from us so called noobs
o2xdaexec said:
right sooo i download jumpspl to stellar then hardspl,open and job done then i can drop on a rom like doing the exec.sorry for being so bloody thick.lol
wish we could have a thread like...
download this file ++++++++ to device then open then do x,y,z
instead of ...
download this link to here then open this here unplug phonethen plug back in and so it continues.making the instructions easy would i think stop all the worrying and asking from us so called noobs
Click to expand...
Click to collapse
So are you saying the Wiki is not easy to understand? Nothing about flashing the Kaiser is difficult. If you are having trouble understanding the steps, then I don't think you're ready for a phone such as the Kaiser.
i just get lost with it all iam a thick yorkshireman.i think its just me reading to much into it all.
It takes a good 3 hours or so to get to a point where you understand how to do it, but once you do it once all following flashes are DEAD easy.
The main issue I had was SIM unlocking my Orange TyTNII to get it so I could flash a new radio to it.
Once you have all the tools, it's really quite straightforward.
that is what i mean.its understanding it all,could be good to do a pdf so it can be printed out step by step.
o2xdaexec said:
that is what i mean.its understanding it all,could be good to do a pdf so it can be printed out step by step.
Click to expand...
Click to collapse
The wiki does contain what you need, Start here and read these steps: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading it covers the basics a few times over.
Ta
Dave
o2xdaexec said:
right sooo i download jumpspl to stellar then hardspl,open and job done then i can drop on a rom like doing the exec.sorry for being so bloody thick.lol
wish we could have a thread like...
download this file ++++++++ to device then open then do x,y,z
instead of ...
download this link to here then open this here unplug phonethen plug back in and so it continues.making the instructions easy would i think stop all the worrying and asking from us so called noobs
Click to expand...
Click to collapse
lol i think i've written a pretty good attempt at step-by-step here:
http://forum.xda-developers.com/showpost.php?p=2498297&postcount=10'
good luck flashing
looks like iam not a rom virgin now
right guys i think ive done it i installed the hardspl then loaded up l26 rom.took me all afternoon to get the idea but i think its done.iam sory if ive pissed you off.but it was dong my head in and needed to get my head round it so iam sorry once again.
dont think i was disrepecting anyone when i said anything, i wasnt you guys are very very good at what you do. ooooh l26 diamond splash screen
now a htc logo thats different to the o2 one i had now the tier install.
looking good at this point.
i think its very daunting for members if they havent done it before with all the posts.
thanks to all.
Problem solved. Thread closed.
I got the last word! Woot!
As the title says, I seriously think I am just being stupid. But I have just spent the last 5 hours searching, trying, and just about anything I can. But I can't seem to get anything to work.
Now on to my situation:
I just got a new Tilt, it is not my first. My first one was when it first came out for AT&T. So it was still the WM6Pro and I SIM CID and HardSPL'd it. So I do know how to do this stuff. Just now with this new one, it must be a newer one, because it came with WM6.1 on it.
Here is what I know I have on it. Bootloader shows this.
KAIS1*0
SPL-3.56.0000
CPLD-8
And this is when the AT&T logo pops up.
R 1.65.21.18
G 25.88.40.05H
D 3.57.00.00
Now the first thing I am trying to do is HardSPL it.
I swear I have tried everything.
First thing I tried was the simple, Kaiser SIM/CID Unlocker & Changer , I start with the Flash-HardSPL and get to the Bootloader saying USB with the Rom updater showing the status bar. Then with the phone still in bootloader, I get Error [260] : Connection, The Update Utility cannot connect to your PDA. and so on.
So I exit that. Go on to the next try.HardSPL v3.07-3.56
All of them end up as the same result as the first. But I will explain what V3.28 as I have heard and read that that is one of the best ones to use.
Get to bootloader, Computer monitor shows status bar, and phone shows status bar. And I wait for it to do anything and then maybe a minute or two it gives me an error. Error [262] : Update Error, The ROM Update Utility has encountered communication errors during the update process. and so on for recovery.
I've also tried to do the HTC Kaiser Hard-SPLv1 - CID Unlock & Flash any ROM to your device (4 free)
When I start this one up it gets me to my screen being completely white. and I can not continue after that without taking the battery out and starting the phone again.
I have also tried other things that I just cant remember right now, cause I have been trying to do this for so many hours, and downloaded so many different things. So if you can and may help me, anything and everything will be appreciated beyond the gratitude I can give. Once again, I do know what I am doing, but I do not know what I am doing ARGHHH! lol.
I think you need JumpSPL1.56-KAIS, then hardspl , Im assuming this because you didnt say you did this step in your post.
Read post #2 here http://forum.xda-developers.com/showthread.php?t=396922
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236
sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236
Click to expand...
Click to collapse
I tried that one, and for 2nd poster, I did try that also. Sorry for not listing. But I still appreciate the help guys.
I was also thinking I had to go back to 6.0 but I went 55 pages back on this section of the forum, and I still cant find it. I'm still looking, but it seems like a dead end to me. =/
there was a guy having this issue a while back, look in the white screen thread towards the end! I will see what I can find for you!
Right now I found a 6.0 ATT rom, so I got that to work, now I will try unlocking it, thank you guys, and thanks to this post (70+ pages back!) http://forum.xda-developers.com/showthread.php?t=326933
Edit 1 :
Alright I got it back down to 6.0, but yet I still cant do anything with HardSPL, CID, or Security. If anyone has any solutions I will listen! Even if its bashing my head against anything! LOL! Sucks!
downgrade I don't believe is necessary
sd73ta said:
pretty sure you have to downgrade to 6.0. Its been a while though and i could be wrong. also try this you should always be security unlocked
http://forum.xda-developers.com/showthread.php?t=361236[/quote
Nope, I didn't have to. My tilt came with 6.1. I had some problems, ended up switching to an XP laptop, was using Vista(prem. sp-whatever). It's too late here, but maybe tomorrow I can figure out what I did, but I think the main thing was using a windows XP pro machine - don't know if it needed to be pro, but that's what I had. Thereafter I've used the vista machine without problem. Good luck.
Click to expand...
Click to collapse
Meh, you need to use JumpSPL first. I've had this happen before, and JumpSPL cleared it right up for me.
I think Jocky has a few you can use. Check his HardSPL thread.
I first tried to use Vista, but then went back to my xp machine.
Edit :
I've tried to the JumpSPL but had major brain damage last night. trying it again with a fresh day. Will let you know.
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!
Yeah, well I can NEVER find anything via search here. Hell, to prove that point, I just typed "stupid" in the subject search line and found: NOTHING!!! I don't know what the deal is, but I've just pretty much given up searching this site.
Which leads to more reading than I'd typically care to do.
J
Munchys said:
Just got it, thanks guys. I apologize for just being completely brain dead. But I really am happy that you guys helped out. I finally got it flashed with the HardSPL It was really easy now. I just could not remember how to get to the file explorer. And the JumpSPL 1.56 worked. Thanks!
Click to expand...
Click to collapse
Glad to hear you got it fixed.
Awesome, fully got it unlocked and everything! Thanks for telling me what I might have missed and messed up on!