HI guys,
I just purchased a headunit for my car: http://www.sevic.com/site/_en_catalogue_sevic_fiche.php?id_catalogue=66
It has a mini USB port on the front and an Ipod 8pin Minidin adapter on the back,
wondered if I could use either to connect my diamond to the stereo as there doesnt seem to be jack in...?
What cables do I need if so???
Cheers,
Biscuitboy
the usb cable that comes with the phone should work . just make sure you select usb drive mode and not active sync mode. then it should work just like any thumbdribve you put in
Yes, but the input on the headunit is also mini USB, so will mini USB to Mini USB work?
Cheers
Related
Dear all, I just want to know,
is it possible to connect normal USB keyboard to PDA through, let's say a kind of connector ?
Sorry for my silly question
not an usb keyboard as himalaya dont have the hardware to be an usb host
which mean it can only be connected to over usb not connect itself
there are keyboards which use IR and bluetooth which works ok
and keyboards which use normal rs232 serial which is also connected to the button connector of himalaya
I got the Sony Wireless 7.1 Headset which is wireless with usb adapter...
But it doesn't actually work on my TF300 Anyone knows about a driver for usb wireless headset's? Cause the usb adapter is "working" (shows blue light) when "inserted"...
I am trying to connect my NVidia Sheild to a powered usb hub with no luck at this point.
Heres what I'm using:
Powered Hub
USB to Ethernet
OTG to USB
Male to Male USB
So I am taking the OTG to USB and connecting it to the Sheild OTG port. From there I have a Male to Male USB connecting the OTG to USB to the Powered usb hub. When I do this I can see that the Sheild's power light is orange which indicates to me that it is getting power and not acting as the USB Host for the Hub?
I did notice when I tried to use an air mouse directly with the OTG to USB it works as it should but not when it's connected to the powered usb hub instead, then nothing works (just charging). Also my ethernet adapter doesnt work via the powered usb hub or the OTG to USB.
BTW this whole physical setup worked just fine (plug and play) with both android MK808 and MK908. I was surprised that the Sheild isnt picking this up as well.
Can anyone tell me if I have incompatable hardware and if so what is compatable? Also I do not have ROOT access to the Sheild...yet, could that be the issue?
Many thanks in advance.
Chris
Hy there
I want to mount my Tablet in my Car at the moment everything is up and running except for the USB connection.
In the Car the tablet will be connected permanently to an Car charger. but i still would like to have an option to plug it into my pc and use USB OTG.
Removing the tablet from the car is not an option because it will be mounted there permanently.
So i thought about this:
When i connect the +5V and GND Lines form the Charger to the Tablet it should charge
Then i would connect the D+ & D- lines to an Micro usb port mounted in the dash. so i can get an usb connection with my laptop.
Additionally i want to mount an Female type A Usb connector to the dash which yould get all the Wires from the Tablet (the +5V &GND ist connected to the carger)
Here is a Picture: http://puu.sh/bV7vN/99f07ad434.jpg
Would this work this way?
push ....
Hi all. Recently I've sold my laptop, as I wasn't using it that much, so I've decided to try the desktop mode (when needed) & also a wireless keyboard with touchpad.
It works fine with the TV, but I can't connect both, HDMI + USB receiver for the keyboard.
I tried 2 docking stations, a thinkpad and a dell, and on both works fine to connect to TV, but it doesn't on the phone. Any idea?
The keyboard is Rii k18.