Contacts not viewable in Dialler - Touch Cruise General

--------------------------------------------------------------------------------
Dears,
I have a problem whenever someone calls me i can't see the contact name even though in my contacts..
My Regional Settings are set to English (UK) as i do on all my WM machines.
Didn't have the problem with the original ROM (Latest HTC WM6.1 ROM) my country code is +961 and the dial sequence is as per below:
+961 (a) xxx-xxx
When someone is dialling it is showing (a) xxx-xxx. Anyone have any idea what setting should be changed to enable name viewing inside of the dialler?
Also noticed in case i dial a number 0(a) xxx-xxx the name does not pop-up but in case i dial 00961 (a) xxx-xxx the name comes up.
My Current ROm and Radio Version are as per below:
ROM: 3.18.931aCS WWE
Radio Version: 1.59.42.15
I think the problem is with the Registry, any Help will be great....
Cheers,
Jack

Solution........
Hey guys found the solution, edit the phone WM6 registry, with a registry editor (you can download a freeware version anywhere).
Edit this register:
Record:
HKCU\ControlPanel\Phone\CallIDMatch
When you find it, change the decimal value from 8 to the desired number: eg 7 in my case.

Related

i-mate JASJAR AKU 3.2 Rom Update 1.90.94

Hello Everyone,
It has been a while since my last ROM update and I thought I would build another one based on the newly available AKU 3.2 core. The good news is that I have completed the ROM and have tested it myself extensively (as always) with no major bugs or issues to report. I am now posting the final version for all that wish to help evaluate and test this beta prior to its full release. As I stated above this is my final beta and all features should operate as desired, however if anyone should have issues or suggestions please post them.
Enjoy,
Jwrightmcps
Now for the fun part!
ROM Details:
Vendor: i-mate
Model: JASJAR
CE: 1.90.94 WWE
Ext: 1.95.03
Radio: 1.11.00
Download ROM Update 1.90.94 WWE:
ftp://xda:[email protected]_WWE_19094_19503_11100_AKU_3_2_ship.zip
New ROM Update Available*
Here is the updated ROM 1.90.96 WWE as promised. It is basically the same as before but with a few minor changes and updates. Below is a list of what this ROM contains. I am also in the process of creating a version of this ROM for non-i-mate brands, but it will be a few more days... Just be patient.
ROM Details:
Vendor: i-mate
Model: JASJAR
CE: 1.90.96 WWE
Ext: 1.95.05
Radio: 1.13.00
Download ROM Update 1.90.96 WWE:
ftp://xda:[email protected]_WWE_19096_19505_11300_AKU_3_2_ship.zip
What's new?
CE Rom:
- CompactFramework 2.0 SP1
- New Bluetooth stack including A2DP, PAN, Printing and FTP support
- Device Page Pool increased to 6MB
- New SIM Manager application v5.22
- Better integration of SIM / USIM contacts
- Alphabetic sorting of SIM / USIM contacts in contacts list view
- Auxiliary display support native in OS
- Improved 'Internet Sharing'
- Much improved quick start wizard with 'skip' for tutorial, settings setup at boot time
- Pre-provisioned email accounts
- vCards over SMS
- SMS Multiple Recipient improvements
- Save SMS to SIM
- One handed PPC folder navigation improvements
- WMP full screen video on all devices
- Smart-type search
- Larger number of preconfigured email providers (including GMail!)
- USB Hard-drive emulation (for sharing storage card contents via USB connection)
- Bluetooth Mouse support (Stowaway Driver set)
- Bluetooth car-kit SIM access
- New Camera application 3.00 22764
- No Battery icon on top, replaced with time instead
- Added Battery Icon at bottom
- New MMS Client 3.5.1.5
- IA Zip update
- New Ringtone Plug-in
- New WlanManager
- GPS receiver Control applet
Extended Rom:
- Mobile Operator settings for all major carriers (including the U.S.)
- Windows Media Player 10 Today Plug-in (No IMEI Lock)
- Skype 2.1 (with Today Plug-in)
- i-mate Backgammon (No IMEI Lock)
- i-mate Blackjack (No IMEI Lock)
- i-mate Club e-mail application
- CA Anti-Virus for WM5
Extras:
Restore "Calendar" Softkey:
ftp://xda:[email protected]/Extras/Default_Signed_Calendar_Softkey.zip
Restore "Rotate Screen" Icon:
ftp://xda:[email protected]/Extras/Default_Signed_Screen_Rotate_Icon.zip
Unlock and view "Extended ROM":
ftp://xda:[email protected]/Extras/Default_Signed_ExtROM_Unlock.zip
These ROMs are designed for the i-mate JASJAR (WWE) but can be loaded on any "Universal" device using the attached files:
Same as Ivan's
Hi,
Is this rom same as Ivan's? and if not what is the difference?
also, can you PLEEEEEEAAAAAASSSSSSSEEEEEE include the languages pack??
This ROM is designed for the I-mate JASJAR and is completely different than Ivan's O2 ROM although they both share the same AKU 3.2 core. see the above post for my ROM contents.
As for the language pack...
if you are referring the the OS language pack this would be impossible, because that would only be on a new device that has never been used before. The language pack feature is a new design in which a new device would already have all languages loaded in the "program memory" from the factory and when the new owner starts the device for the first time it would ask what language he/she preferred, then after the user's selection it would erase all languages except the one chosen. So these language packs are not available in any ROM and therefore I would never be able to package it.
I hope this answers your questions.
Take care,
Jwrightmcps
hi,
I successfully extracted the ship.exe from the ship.zip,
as I have a Qtek 9000 I need the .nbf files.
It looks that the .exe files are not a SFX CAB archive.
This way I cannot use MaUpgrade to flash my Qtek.
Could you please put a .exe SFX file in the ftp? so I'll be able to extract the nbf files.
Thank you very much
Dias
I flashed it and its really good so far. No problems yet
SFX???
what are you trying to do???
all you need to do is run the .exe and then go to the temp folder (dont close the installer) on your computer and look for the newest folder then open it and copy the nbf files you want.
Then you can use the MaUpgrade tool. You may want to put your device in bootloader mode first.
Take care,
Jwrightmcps
is there any HTC Intellipad included, cause i cannot live without it, in Lt.Cmdr Ivan aku 3.2 beta 12, the phone pad is gone ....
yes intellipad, smart dialer, voice dialer and many other features.
enjoy!
-J
Jwrightmcps said:
SFX???
what are you trying to do???
all you need to do is run the .exe and then go to the temp folder (dont close the installer) on your computer and look for the newest folder then open it and copy the nbf files you want.
Then you can use the MaUpgrade tool. You may want to put your device in bootloader mode first.
Take care,
Jwrightmcps
Click to expand...
Click to collapse
If I run the .exe = error 120
The .exe file needs to have property SFX, So I can extract the files .nfb. so I can run MaUpgrade ))
Look the atatck file.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Here, for all those who don't know how to extract or upgrade their ROM. Follow this thread: http://forum.xda-developers.com/showthread.php?t=269118
enjoy!
Jose Dias
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Is it as fast as Ivan's ?
Use MaUpgradeUt_noID.zip
josedias said:
If I run the .exe = error 120
The .exe file needs to have property SFX, So I can extract the files .nfb. so I can run MaUpgrade ))
Look the atatck file.
Click to expand...
Click to collapse
Bro, use the no id maupgrade version
josedias said:
If I run the .exe = error 120
The .exe file needs to have property SFX, So I can extract the files .nfb. so I can run MaUpgrade ))
Look the atatck file.
Click to expand...
Click to collapse
Hi,
I just did:
- Start install
- open (windows->run) "%USERPROFILE%\Local Settings\Temp"
find latest created folder (which contained all nbf files).
- copy *.nbf to where maUpgrade was extracted
- close install
- run maUpgrade (needed to do it twice as it didnt go into serial mode fist time).
hope this help
I cant find any difference between this and ivans beta (10,11,12). Except its less buggier just as quick.
I soft resetted before can install the imate Extended rom.
The betas often crashed on me.
vbguru613 said:
Except its less buggier just as quick.
The betas often crashed on me.
Click to expand...
Click to collapse
Have you found bugs or otherwise strange behavior?
How do i get my MDA PRO into the bootloader????
Hello,
I'm trying to install this rom but my MDA PRO doesn't turn into bootloader but starts up??
How do i get my MDA PRO into the bootloader????
Regards,
Schmia
Edit: Sorry guys, forgot to google....light button+ powerbutton and reset.
.....updating now......
Successfull ROM upgrade!
I will let u know if its good! (or not)
Regards,
Schmia
Heres my findings and bugs report for this latest Beta Roms we have here, plus i got a New Version of SIM Manager 5.22 to share with u guys!!
NEW SOFTWARE!!!
New SIM Manager v5.22
Current Version in the ROM is v3.16
I found this NEW Version of Sim Manager v5.22 from the Internet. You can copy ALL your name contacts from memory to SIM card at one go. One catch though - contacts saved under company names will only display contact numbers and NOT company names. Would like to share this and hopefully u can intergate it into your next Beta release or maybe the Final release.
Bugs Found:
1: Hardware buttons not responding anymore
a) volume slider
b) light button
c) voice dial
d) camera
SMS Multiple Recipient improvements
2: Cannot find this function in the inbox application for SMS. Not sure if its included or buggy sorry i cannot find it. Pls englight me on this issue. Thanks!
New Ringtone Plug-in
3: Sorry, can't find this application or program either.
4) Default File Explorer is Missing!!!
Findings:
1)New Camera application 3.00 22764
Camera Pictures Quality still not much improved
There is a newer version found in UNI.AKU3.2WWE-indra9110.BETA1 (130.115) Camera Version is 3.00 22844, i can't get hold of this version hopefully someone who has this version can share and contribute. Thanks!!
2)Screen Rotation icon no longer in taskbar!
I personally found this icon very useful, can pls reinstate in your nest Beta or the Final release. Really Appreciated!!
3)Bottom Bar Default Calender and Contacts function changed to Notes and Contacts.
Its this a AKU 3.2 upgrade or can it be changed back to Calender and Contacts Instead??
4) New Game included
Pocket Chess- Cool!!
5)Some findings on Default Memory on this Latest AKU 3.2 Rom
Default Storage Memory- 37.38MB
Default Program Memory- 28.91MB
6) Speed
Yes, Definately we have a faster ROM, still cannot comment on stability cos just downloaded it an hour ago, hope my findings can help improve this ROM further. Thanks Jwrightmcps Great Job, keep it going man!!
Does this rom support Video calls ?
Does this rom support Video calls ?
thanks
it does support Video calls
4) Default File Explorer is Missing!!!
Its in the Start menu (I thought a 3.2 Feature)
1: Hardware buttons not responding anymore
mine does
a) volume slider
Mine works
b) light button
does not work (i use the power on off button
c) voice dial
Dont care
d) camera
Works
Bugs...
The file explorer is not missing it is on the start menu (look closer please, as your post might scare people)
"ALL" hardware buttons should work, as the do on all my test phones (7 JASJAR's) Please check this again.
SMS Multiple Recipient improvements means you can SEND a text message to more than one person at a time much easier than before (this is an AKU 3.2 feature)
The Ringtone Plug-in is found by doing a "tap and hold" on any sound file, this now includes mp3 files. (so there is no program to run, that is why you don't see it)
The Calendar softkey was replaced with Notes, due to the fact you can already launch the calendar from the today screen. Leaving it as the default "Calendar" is redundant don't you think? I fell it is far more useful to have another program to launch, such as the notepad, so one could take notes quickly. I will not change this, but could provide a signed cab file that would change it to the default.
Screen Rotation Icon, again this is another redundant feature that was removed, since our devices will rotate the screen automatically. I will not change this either, but again I can provide a signed cab file for those that wish to have this icon available.
There were many other additions that I don't think you noticed yet. You all should pay attention to the things like "USB HDD", "Bluetooth Settings w/ all profiles" and the updated "Bluetooth Mouse support" just to name a few.
I hope this answers you questions
-Jwrightmcps
First of all, I would like to say thanks for this ROM (and all the guys like Ivan & Indra that put a lot of effort into it).
My observations of this ROM:
1. All buttons works perfectly. Volume, Voice Dial etc...
2. ROM is much polished than Ivan's ROM. A lot of Registry tweaks are even included already.
3. Initially after Hard Reset, the ROM felt very sluggish. However, after applying the usual Registry Tweaks this ROM just flies.
4. First time sync with Activesync 4.5 Beta is really fast. Normally it's a pain!
5. Clear Storage now resides in Control Panel as 'System Restore' so does Download Agent.
6. Lots of goodies: PhonePad, Smart Dialing, USB HDD, BT Profiles/Drivers/SIM Access, Clearvue PDF, Voice Speed Dial as well as Pocket Chess.
7. Messaging is now 'Outlook Mobile'
Will observe more Once I got all my softwares installed.
As for now, this ROM looks good.
Cheers!

[22-Nov-2007] XDA Mobile 6 Release 4 - Happy Thanksgiving!

XDA Mobile 6 Release 4
Let's give thanks on Thanksgiving; Its a new XM6!
You can now cook your own version of this rom! Click Here!
XDA Mobile 6 Release 4 (XM6r4 for short) is the fourth version of the popular XM6 rom series for the Wizard. The base rom is the same, but with new features and fixes to a few bugs found in XM6r3.
XM6r4 is built on the OS 5.2.318 Build 15342.4.0.01 rom that was provided to us by InGeNeTiCs from Howard Forums. While this is not the "newest" release of WM6, it is the last known release that was built for the Wizard (ie: its not a port from another HTC Device). Various pieces of the base rom have been upgraded, so some of it is stuff ported from other phones so that it can have newer functionality. Overall, I feel this base is very stable and fast and makes a great base to cook on.
Please Note: this ROM was NOT intended to push the limits on speed optimization or memory optimization. It was made to be functional, stable, and something that I myself wanted and will use. I've found it to very quick and responsive (especially with Overclocking with BatteryStatus), and so far Battery life has been very good for me and those beta testing this. If you have a Battery Drain issue, make sure you flashed back to an official rom before you upgraded to this one, as that should correct extended rom corruption that has been shown to cause battery draining. BatteryStatus is NOT included in this ROM. If you want to overclock or use other features of BatteryStatus, you are welcome to download and install the latest version of BatteryStatus yourself. I personally use it, and have OMAP set to 247MHz with CPUscalar set from 143 to 247 and Boost set to 260Mhz.
Base ROM Information
The base rom was an "Official" Wizard WM6 ROM that was part of the development cycle of WM6 inside of Microsoft (Dogfood as they call it). The base rom was not a port of another device rom with drivers and stuff pieced and parted onto this one, but this was an actual Wizard WM6.
Windows Mobile 6, OS 5.2.318 Build 15342.4.0.01
ROM Version: 10.1.0.811 WWE
ROM Date: 08/11/06
Protocol: 4.1.13.09
There is no Radio, IPL, SPL or Extended ROM included in this (so its G4 "safe").
What's In XDA Mobile 6 Release 4?
Bolded items are new / upgraded from XM6r3
WkTask 1.0.1.1 (replaces pBar and AltTab)
Aserg's Touch Scroll Only
HButton (Enable multiple apps on hardware buttons)
HTC Action
HTC TOUCH Dialer with enhanced keypad numbers by peu
HTC Voice Recorder
WMP Touch style skin
PPC Contacts Manager
QuickMenu
MortPlayer replaces HTC Audio Manager
Internet Sharing via BlueTooth DUN (like WM5); WM6 Internet Sharing is still there, the BT DUN is in addition to that!
Schap's Advanced Configuration Tool v1.1 and VoIP Setup Tool
Office 2007
9 Button "Touch" Style CommManager from the Kaiser
VoIP (See next post for instructions to set this up)
SQLCE
Arcsoft Composer 4.2.8.1 (SMS and MMS are split apart and not merged)
Notepad editor
Pocket RAR
SIP Config
SK tsync (Time Synchronization)
Total Commander Beta 2.5 Beta 3
PIM Backup to 2.5
Esmertec Java Manager (replaces the standard Midlet Manager)
Oxios Memory
Windows Live Search searches via Google
WM5torage 1.78Beta4
SIM Manager
dotFred TaskManager (with registry editor link setup and associations built in for .reg files)
.NET 2.0 SP2
delayedexec.exe is in \Windows but is not configured. See this post for details on using this.
FingerFriendlyFriends 1.0 Beta 2 (Replaces PocketCM)
WinXplore 0.4
Mortscript 4.1
Grey / Black Onscreen Keyboard
Mobile Justice (a security app that will send an SMS if an unauthorized SIM is placed in your phone)
TodayAgenda 1.0 (Not Beta!)
StartClean replaces ClearTemp
PocketScreen replaces Pocket Screen Capture
1-Calc Lite
PeekPocket 1.5
MoDaCo NoData (so you can turn off data sources)
Smartskey 0.56 (DPAD is set to 0 in the .ini so the up and down scrolling works in the Phone dialer as expected in WM6)
DotFred's SoftKeyAppletEx
WM5NewMenu
Adobe Reader LE
Battery Gauge (Displays a colored bar at the top of screen to show battery level)
BT Crawler[/b]
Call2Contact
Camera 3
Freecell (a Solitaire card game)
SuperDoku v1.1 - Puzzle game
Tetris - game
Some new and fun ring tones - Nokia death, R2D2, Oldphone and Wolf Howl)
Mods made from XM6r3
In addition to the apps listed above, the following fixes and mods were made to improve the user experience on XM6r4
Changing ringtone now stays changed when you leave the Phone app
Using press and hold on CommManager button toggles vibrate on and off, and phone does NOT stay stuck in vibrate / no ring mode
Regional Settings default to English (United States) and use a slash for the date seperator (M/dd/yyyy)
Menu sounds work by default
Pressing the "End Call" button does not disconnect GPRS but minimized the active application. Pressing and holding the "End Call" button for about 5 seconds will do a GPRS Disconnect
Internet access over ActiveSync (USB) connection works (You must apply a registry fix on your PC first. See the next post for the fix)
D pad now works differently with PIE. Up and down presses on the D Pad stay the same, but pressing right jumps forward a page and pressing left jumps backwards a page. Makes going through websites easier (IMO).
Fixed the A2DP registry for sampling
Registry Entries for PIE Connections to speed page loading
Registry Entries to increase In Call Volume
Press Button 1 for messaging (like normal) or hold it a little longer and HTC Action will come up (via HButton)
WkTask setup to not show Phone and Activesync as running apps in task bar
QuickMenu enabled for nice drop down and cascading start menu
Touch Scroll only is active so use your finger to scroll in most places
Requirements
You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
You MUST be running ActiveSync 4.5 on Windows XP (Vista comes with the correct sync utility, although there have been issues reported about Vista and sync'ing with PPC's so be aware of that).
Before you attempt to upgrade to this ROM, Please follow this thread to learn how to flash roms, CID unlock your phone, and how to fix issues you may run into! It is also recommended that you flash your phone with a Windows XP computer and not Vista. It will work with Vista, but if you run into problems Vista can't talk to a phone in Bootloader mode!
Recomendations
I HIGHLY Recommend that you flash back to an official rom before upgrading to this (or any) custom rom so you have a clean base (and correct any Extended ROM corruption you might have). G4 users would flash back to their provider's latest official release or the Wizard Love ROM. G3 users can use T-Mobile 2.26 for a good base.
If you use BatteryStatus (its NOT included in the rom!) to overclock, I don't recommend overclocking above 260Mhz, and the CPUscaler settings in BatteryStatus should not be set to a min lower than 143MHz (or your device may not wake back up after going to sleep).
Newer Radio ROMs on WM6 have had issues in the past (especially for Cingular / AT&T users). T-Mobile 2.19 (UK or NL versions) seems to be the most stable, but you can now run newer radios with the attached cab. This cab also works for some other providers but not for all, so its up to you to test what works for your phone.
Credits
I've moved the credits to the 5th post of this thread as this post has become too big.
Known Issues
When entering a contact in the "To:" field it does not link to the outlook contacts, it instead shows suggested words. You can tap the word "to" and it will go to the contact list no problem. Also, when trying to select a file to send no file names or pictures are displayed just empty square boxes, you can tap the box and it will go to the next sub folder, if it is a folder. There are no thumbnails or files listed so it is impossible to navigate to select a picture or video. Click Here to download patch
After the initial flash, some have reported that QuickMenu pops open the start menu when you are supposed to tap the screen to start the phone setup. Just wait a second or two and it will close by itself.
The base rom has a bug / feature where if GPRS is active, unanswered calls may not show up as a missed call and may not give notification of the unanswered call. If this happens, the unanswered call shows up in the history as an answered call with a duration of 1 or 2 seconds.
Official Download Sites for XDA Mobile 6 Release 4
I'll upload with more mirrors as they become available.
RapidShare Download
SendSpace Download
HTTP Download
.
XM6r4 Addons and Information
Radio ROMs
Here are links to a few of the Radio ROMs that I've used with XM6r4. Remember that Radio's newer than the 2.19 radio may require the WM6 Fix CAB that is attached to the first post of this thread.
T-Mobile 2.19.11 UK
Cingular 2.25.11
2.61.11
2.69.11
Voice Command
MS Voice Command 1.6 US HERE and HERE and HERE
MS Voice Command 1.6 German HERE and HERE and HERE
MS Voice Command 1.6 FR HERE and HERE and HERE
MS Voice Command 1.5 UK HERE and HERE
How to not have a 24hour Clock (or how to show AM/PM)
This works on all WM6 roms
Go to Start > Settings > System > Regional Settings
Make sure you have the correct Region selected
Click on the Time tab
Click on the drop down box for Time Style
Notice the little up and down arrows? This is a scrolling region in this dropdown. Click the up arrow a couple of times and you'll find h:mm:ss tt
Thats it. Microsoft is amazing at having a 2 line scrolling region on this dropdown. You'd think they would have had at least 3 or 4 lines show up for chosing (and it would be more obvious that its a scrolling region then too).
GPRS / MMS Setups
First, here is The Ultimate Thread with people posting operator settings for about all providers! In the first post is a link to the thread where walshieau is creating an automated way of setting up all of these!
What follows is a list of automated and manual ways of setting up GPRS and MMS for various cell providers and regions that I've collected:
The cab file for Cingular users to setup GPRS and MMS - Click Here.
For T-Mobile US users, here's a link to a thread by Lurch with 3 cabs for the various plans. Famewolf tested the 3rd one and it worked for him.
For T-Mobile US users, here's a link to a post by FZZF that has info for your setup of GPRS and MMS by hand
Here's another link with cab files for T-Mobile US users:
MMS auto config t-mobile.cab (Thanks to marscandybars for posting this)
Here's the settings for the original (Pre-Cingular) AT&T Wireless (blue sim)
Rogers Canada CAB
German users check HERE
Greek users, Tna posted a cab for Greek Operators, or check HERE
European carriers should check out this thread by praneetsrivastav.
VoIP Setup Instructions
Thanks to joaosousa for the following steps!
!!! Only Tested in a Wifi network !!!
Install the wm6voip.cab.
Restart your Wizard (Soft Reset).
Go to Start > Programs > Toobox and open Setup VoIp Aplication.
Insert your VoIP account information.
Restart your wizard (Soft Reset).
Now you should be able to use VoIP, check the status of the service in the today screen.
This didn't work? Then please check this thread:
http://forum.xda-developers.com/showthread.php?t=299950
Connecting XM6r4 to the Internet via ActiveSync 4.5 on Windows XP
For those having issues connecting to the internet via Active Sync, cut and paste this code onto your PC in a file called net_over_activesync.reg and run it (on your PC not your phone)
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Splash Screens and Splash Only RUU for G4
For G4 users, Click Here for the RUU with the Splash Screens of this rom (since you don't get them when you use the shell tool). As I understand it, this is completely safe for a G4 as its nothing but splash screens (no OS, IPL, SPL, Extended ROM, etc, just splash and htc logo screens). I've also placed the .bmp files that make up the splash screen in the zip file so you can see them directly before flashing this.
If you have problems flashing the above RUU on a G4, then extract this http://forum.xda-developers.com/attachment.php?attachmentid=29158&d=1152698784 and pull the nk.nbf file out of the above Splash Screen file and put it into the directory of this one and run this RUU. You can use the same method for flashing the Radio Only ROM (pull the nk.nbf file out of the radio only rom and put it into the directory of this RUU and run it). Thanks anichillus for that link! You can also check this thread for another RUU that is in English and seems to work for most G4 users. Thanks Vippie!
Weather Panel Setup
See my post in the Wizard forum on how I setup WeatherPanel. It will give you a fixed dll with correct moon phases through 2008, new/better Moon phase icons, and a cool theme called Chameleon-240 QVGA. I dumped SBSH Pocket Weather after seeing this setup
Hermes Black Cabs that may be of Interest
Transcriber can be added back into XM6r4 by using the Black 3 Add-on CABs file. There may be others in it that may be of interest also for some. Included in this file is Cyberon VoiceCommander, Cyberon Voice Dial, VIjay555 utils, and a Slingbox patch (none of these I've tested).
Turning off Word Auto Completion
Some people do not like how Windows Mobile tries to suggest words that you may be typing. If you are one of those people, jacob-mda wrote up a post on how to turn it off. Check out This Thread.
Auto Completion for Spanish
User peu found the file to change the auto completion of words to Spanish. You can check his post here for details and a link.
Skinning the Dialpad
You can find skins for this dialpad HERE. See image attached below for an example.
Skinning MortPlayer
MortPlayer is very skinnable. Check out the qVista example attached below. You can find qVista here: http://www.aximsite.com/boards/them...rting-qvga-vga-landscape-portrait-square.html
More skins can be found here: http://www.sto-helit.de/index.php?module=download&action=list&category=23
Or create your own skins by reading this: http://www.sto-helit.de/freeware/pocketpc/mortplayer/en/skinhelp.html
BatteryStatus (for Overclocking, CPUScalar, and much much more)
BatteryStatus is a very popular utility around here and for good reasons. Currently its in a beta phase and the author is releasing new versions of the beta constantly so I decided not to put it in the rom and let people install whatever build of it they want. Also, some versions of BatteryStatus have been known to cause excessive battery drain, so be aware of that too. You can find it in the Official BatteryStatus thread and if you do use it, feel free to give feedback on it in that thread as they are always looking for ways to improve it.
NOTE: If you do use overclocking, I recommend you use the OMAP Apps tab to setup Camera to be at 195Mhz as it can mess up the display if you are overclocked and doing the camera.
How to change Keyboard for other languages and layouts
This thread has information for changing the keyboard to work for other layouts.
.
Included Apps Info
Info on Included Apps
FingerFriendlyFriends v1.0 Beta 2
For those wondering, PocketCM was replaced in XM6r4 for two reasons. First the author of PocketCM did not want it included in roms. Two, I like the FingerFriendlyFriends app (even though I hate the name )
Check out these images of it:
I would advise you to check out and participate in this thread: http://forum.xda-developers.com/showthread.php?t=340227&highlight=fingerfriendlyfriends if you like FingerFriendlyFriends. The official website is http://www.jotto.no/fff/ and has info on using and making the most of FFF
For those that don't want to run FFF and want the standard Conctact manager back you can do the following:
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSCONTACTS
Change "String 1" value from "\Windows\PocketCM.exe" to :MSPOUTLOOK contacts.
Then if you want it back, you can change it back to \Windows\FingerFriendlyFriends.exe
Since FFF is in beta, if you need / want to upgrade, just drop the FingerFriendlyFriends.exe file in \Windows
SK tsync
Included in this rom is SK tsync, which will synchronize your phone to time servers. I've included in \Windows a special link called tsync silent.lnk . You can copy this link (with TotalCommander or use WinXplore) to your \Windows\Startup folder and it will allow your phone to sync its time after a reboot. Famewolf also wrote a Mortscript for easy install (since Mortscript is part of this rom). Click Here to download this script, then just place it on your phone and run it, and it will copy this shortcut to your Startup folder for you.
MobileJustice v0.8
MobileJustice is an Anti-theft app that you can configure on your phone. Just go to Start > Programs > Accessories and click on the MJConfig icon (first time in you will get a message that there isn't a config file, just click ok and it will be created). To us this, check the Enabled box, then click Add on the Allowed line. You can then setup your SIM card as an authorized one, and add other SIM cards IMSI numbers if you use more than one. Next click on Add next to Report to: and setup an SMS number (wife, friend, colleague) where you want the text message to go to if an unauthorized SIM is put into your phone. You can add multiple SMS numbers if you want. At this point, your phone will now be setup so that if an unauthorized sim is put in it, then it will send an SMS (with no record of it being sent) to your Report To list on the next boot (you can test this by not setting up (or removing) the Allowed and then doing a soft reset).
For more advanced, you can turn on the Disp MsgBox at the top and then put in some text in the MsgBox text line. This will pop up a Message box on the screen of the phone after a boot, if an unknown sim is in the phone.
You can also enable RMon (bottom half of the screen), put in a pass phrase, and then turn on MsgBox (GPS and LocCall do not work on Wizards, and the other options haven't been implemented in this version). By doing this, you can now send an SMS to your phone in the following format:
+m passphrase message
Rmon will intercept the sms message (so it will not show up as a received message), and if the passphrase matches the one you put in the configuration, then it will pop up a message box on the phone with your message in it (so you can secretly send messages to the thief to possibly intimediate them (or whatever).
The project page for MobileJustice is located at: https://sourceforge.net/projects/mjustice/
More Info
Coming soon
Credits
Credits
I would like to thank the following in help (directly and indirectly) with XDA Mobile 6:
Faria for providing the initial ROM Kitchen that got me cooking
anichillus for the fantastic Hyper Core ROM Kitchen which was exclusively used in the production of this ROM
Dr Puttingham for the guides, information he has provided to all of us
Molski for having a nice tutorial on various cooking tools and providing easy access to info at http://www.molski.biz
mattk_r and theloon for inspiration and pushing the envelope and for the fantastic set of OEM packages
Famewolf for constantly pointing me to new apps, new versions, and posts about features like BlueTooth DUN to add into the rom.
Those that took the time to help alpha and beta test XM6 Release 4 (Rudi, Peter, and Ben). We worked out a number of issues with a nice quick beta test (XM6r3 beta worked out most of the real bugs so this one was "easy" )!
Everyone that installed and gave feedback and support on the other XDA Mobile 6 threads
Everyone that I thanked in my other ROM releases!
I thought there were going to be door prizes...didn't we agree on door prizes? No mouse pad?
Great job once again mfrazzz on the rom!
^..^
congratulations..
This really is an excellent release Thank you, Mike, and happy Thanksgiving..
One remark though, for everyone who may see the QuickMenu popping up at the first boot after the flashing: You don't need to click anywhere to make QM disappear, it will hide itself after a few seconds and you can continue to the initial configuration of the Wizard.
Release 3 is one of the best roms, i was waiting for next version.
Thanks for this one, will flash it today.
Mirror rapidshare
Code:
http://rapidshare.com/files/71438175/XM6r4.zip
What about the pagepool and the free RAM ?
Good job
Release 3 was one the most stable ROM for WIZARD, I have noticed so far.
Wish the same for release 4 too.
Thank you
Happy thanksgiving.
I'm curious, what happens to my apps installed on my storage memory? Will I have to reinstall everything? I'm uprading from Release 3.
Reload Mortscript
donutman said:
I'm curious, what happens to my apps installed on my storage memory? Will I have to reinstall everything? I'm uprading from Release 3.
Click to expand...
Click to collapse
If your apps require registry entries more than likely you will have to reinstall them..they may or may not keep your settings depending on whether the settings were kept in the file or in the registry. (usually the registry)...any documents or files stored on the card should be fine however.
Here is a mortscript which may be of use to people reinstalling...it's called Reload..I am not the original author..I just made a few changes.....these instructions are taken from the Readme.txt inside:
How to setup:
1)Extract Reload.zip to the root of your storage card.
2)Place cab files in the CabsAuto folder if you want to the cab to be automatically installed to the phone storage.
3)Place cab files in the CabsManual folder if you want to be able to choose where to install the cab.
4)Place file in the Backup.zip file that you want to be restored to root of phone.
ie. If you wanted example.jpg to be placed in the \Windows folder, place example.jpg in the Windows folder of the zip file.
5)Place file in the SDBackup.zip file that you want to be restored to Storage Card.
*Please note that the cabs files placed in the CabsAuto folder need to conform to only asking the user for the installation destination, then showing installation successful/unsuccessful. Otherwise you might encounter some problems. You should place cabs that don't conform in the CabsManual folder, or adjust these cabs with programs such as WinCE CAB Manager.
###############################################
How to use:
2)Execute Reload.mscr. This will initiate the script that will first install the CabsAuto, then CabsManual, restore the files in the Backup.zip file if it exists, and finally restore the files in the SDBackup.zip file if it exists..
###############################################
Please note that files in CabsAuto are cleared out as they are installed so you may want to have a "CabsAuto.save" you copy over before a Reload.
voice command
how can i get voicecommand to activate when i push the button on my headset. right now it just starts the phone app
WOW! - One Question
This looks like an amazing release. I haven't flashed my phone since TNT 4.0, but I am going to try this tomorrow night for sure. Just one question, does this have the fixes so that there are no problems with the missed call notifications when using GPRS or during another call?
Thanks a lot for your hard work again mfrazzz!
zakhir_n said:
This looks like an amazing release. I haven't flashed my phone since TNT 4.0, but I am going to try this tomorrow night for sure. Just one question, does this have the fixes so that there are no problems with the missed call notifications when using GPRS or during another call?
Thanks a lot for your hard work again mfrazzz!
Click to expand...
Click to collapse
Try reading the author's first posts since he answers this.
patek said:
What about the pagepool and the free RAM ?
Click to expand...
Click to collapse
6meg PagePool. You can see free ram after a clean install in the image posted in the first thread. Roughly 25meg of Program Memory, and 42meg of Storage.
zakhir_n said:
Just one question, does this have the fixes so that there are no problems with the missed call notifications when using GPRS or during another call?
Click to expand...
Click to collapse
As stated this is mentioned as a known issue in the first post still. Never got from its right what the fix was (and may just be an issue with 318).
Awesome Job!
Once again, an awesome job mfrazzz. Keep it up. I have been using the XM6R3 until today.
An awesome collection of apps in this release.
Gobble, Gobble!!
The radio fix?
The Radio fix (XDA Cingular WM6 Radio Fix2.cab) ... has that already been applied and, if not, what does it fix exactly?
Which could be causing my problem? My girlfriend isn't getting my texts and she has verizon. Is it the 2.19 radio rom, this rom, or the T-mobile settings I chose?

Need Registry Entries from original O2 ROM (MMS settings)

Hey guys,
basically i have upgraded to gullum's ROM and found that my MMS settings are wrong, meaning that pictures i send get resized by o2. My mms pictures are tiny and i need a registry entery from the original orbit 2 rom to help.
The links to this are:
http://forum.o2.co.uk/viewtopic.php?t=11821
and
http://forum.xda-developers.com/showthread.php?t=441428&page=2
could someone with the original o2 rom installed please tell me the registry entries at location:
HKEY_LOCAL_MACHINE - Software - Arcsoft MMS UA - Config - mm1 - WspHeader
for
User-Agent string
and
x-wap-profile string
thanks
Fergus
As a temporary measure i decided to use the info from this thread,
http://forum.xda-developers.com/showthread.php?p=2648519
but i still need the orbit 2 settings. If anyone can spare 5 min to check those registry strings that would be great, thanks!
just for my own records what the gullum ROM has is:
(http://www.htcmms.com.tw/gen/Polaris-1.0.xml)
and
(HTC_P3650/arcsoft-mmsua-4.0.0.xx)
User-Agent string
HTC-8900/MR2
and
x-wap-profile string
http://www.htcmms.com.tw/ATT/Pilgrim-1.0.xml
thanks for replying, but are you sure you are using o2? Those headers would appear to be for another service provider and model.
Surely the user agent profile would have orbit2 in it somewhere?
I have the 02 XDA Orbit 2 running O2's official wm6.1 update:
RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
But, I am in the USA and use a cab file to install AT&T's settings. Guess that's a problem as far as the settings you're seeking.
Sorry.
this makes perfect sense then. The cabinet file has likely altered your mms applications software, arcsoft to think that the phone is the pilgrim. Likely this is a phone that At&T sells with its network, so it knows exactly how to handles picture messages from this phone.
The ignito fix works for me in the same way, however i would prefer the original o2 settings.
Had occasion to do a hard reset so I let it install the O2 UK Post Pay settings. Hopefully this is what you need:
User-Agent
Xda_Orbit_2/arcsoft-mmsua-4.0.0.xx
x-wap-profile string
http://www.htcmms.com.tw/gen/Polaris-1.0.xml
thank you very much this is exactly what i was needing! Your help is much appreciated.
However it is just my luck, i need to reflash since i appear to have a touch screen/button fault. If this doesn't clear then i will be sending the device back. So i will have the opportunity to get the settings anyway!

SmartDialer from non English contacts

hi can anyone help me on this?
on my ROM AthineOS i have remove the official htc kaiser dialer and smartdialer and i have the standard WM Dialer this one have already smartdialer (WM)
here is my question
when install this dialer HERE including already HTC Smardialer
but.. this one not found My Greek contacts.. found only English contacts..
with default wm dialer with default wm smartdialer find any contacts when push the numbers
when i want to find bob must push "262" HTC Smartdialer find bob only
WM smart dialer with "262" find bob and βοβ
so can have greek with htc smartdialer? or with other way on this dialer on the link?
Youn can find some clue on How to Change T9 Dictionary Language. More information can be found in this thread.
But I never try it, coz I use Chinese Language, which is more complex to do that that on an English ROM must use a seperate app.
The best smart dialer program for Chinese is called CeleDial, developed by Yonsm in 2007. Its English version though, does support multiple western language addons. Please check here. In the zip downloadable from the site, there are two files, the cab I'm sure it will support Greeks if you add a language file in the folder. But it will change a dial pad for you. It is a very nice-look and finger-friendly pad, but unfortunately the pad does not support 3G video call, since it was last updated in 2007, and 3G is not available in China at that time. (Strange it is still compatible all the way through WM2005, WM5, WM6, WM6.1 and WM6.5 now).
There is another exe file there, use this exe you don't need the cab, just paste a shortcut of this exe to windows startup folder. And this way it will not change the dialpad, only act as an addon for dialing program. But I'm not sure in this way it support additional language or not.
The advantage of CeleDial is: It will read from contacts, call history by any clue from your T9 input. Example if you have a contact named John Smith and his no. is 0123456789, you can just dial from the pad 'john', 'smith', 0123, 234 or 6789 to locate the contact, any along with you input more clue,the target range will narrow down. It is especially useful if you have many contacts. Like me I have more than 900 contacts named in different languages. But I never use the 'contacts' function of the phone, every time I want to look for somebody just go to the phone pad and dial some clue.

How MDA Vario IV stores numbers in phonebook

Hi
I've searched this for a couple of hours, but cannot find anything.
I store a number in the phone book in the standard way....07xxxxxxxxx.
Occasionally, when a call comes in, it'll come through as +44xxxxxxxxx.
When it does this, it displays Unknown Caller.
It didn't do this with the Vario II or III.
Any ideas why this happens, and how to rectify?
On a different note, i've never flashed my phone. I'm not computer illiterate, but could someone tell me how to do it!!!!
Thanks for your help
Best regards
It is a problem with caller ID trying to match too many numbers, you can change this setting in the registry under call ID match (trying to find a link)
* HKCU\Control Panel\Phone\CalIidMatch value:7
xda link:
http://forum.xda-developers.com/showthread.php?t=515136
is definately your problem, I had the same thing drove me mad.
Hi laughloudly
Thanks for your reply.
Sorry to be stupid but can't find HKCU on my phone? - HKCU\Control Panel\Phone\CalIidMatch value:7
Best regards
You have to get a Reg Editor and navigate to that specific registry key.
Thanks Bruce, could you recommend one?
Total Commander has a fantastic reg editor builtin (in the \\plugins folder).
mine is set to match 8 digits (im in the UK)

Categories

Resources