Database Info

Vodafone 1605 (TyTn) and Vodafone Live!

Hi All,
I've recently bought the Vodafone 1605 (aka Hermes). I'm trying to access Live! I've searched and found a post for getting the jasjar to work with it. I've checked my wap proxy settings, I have reidentified my browser as the Nokia6630 with the registry hack...
Unfortunately, I just get a page with:
> Next
.............................................................
HomeMy MenuMy PageSearch
I can click on some of these and it gives me various blank pages.
Does anyone have any ideas? I'm keen to get mobile tv working.
Cheers
Simon

Does nobody have any ideas? What is the difference between the pocket IE setup for the hermes and for the jasjar?
I've tried putting all sorts of things in the regkey:
[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\]
and done the change to (Default) from Vodafone/1.0/HTC_Mercury/1.20.161.3/Mozilla/4.0
to
Vodafone/1.0/HTC_Mercury/1.20.161.3/Nokia6630
or even
Nokia6630
I have cleared all the other values such as compatible, Desc, Platform, UA-language, Version.
IE seems to be ignoring that setting completely.
Yours desperately
Simon

I'm in the same position as Simon. The JasJar posts were all a while ago - is anyone accessing TV on Vodafone now using a JasJar?

Looking a bit further I have discovered the key:
[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\UAProf
This contains a url to some settings for the browser. Could this be overriding the other keys? Could someone who has manged to get live working on their device confirm whether this key is present for them?
Si

I have also tried this tonight and have had the same problem. Any help would be much appreciated.

CAB for GPRS Setting

Anyone here knows where can I download auto config of GPRS for WM6, just like what I have before with my WM5?

take at look in the second post of this thread
http://forum.xda-developers.com/showthread.php?t=310954

bart_zila said:
Anyone here knows where can I download auto config of GPRS for WM6, just like what I have before with my WM5?
Click to expand...
Click to collapse
Might help if you told us who your carrier was
But yeah, as stated above, check the 2nd post of my XM6 thread as I have cabs and pointers to various cariers... If you find one I don't have, let me know and I'll update it.

thank you for your replies, I am from the Philippines and I am using Globe Carrier. Before with my WM5 I have this auro config from my menu, and from that I got to choose the network available with it autosearching.

sweeeeeeeeeeeeeeeet.
THANKS!!!!! --- @ BIGstiff (yuck, btw.)

For our german friends:
https://shop.dangaard.de/files/Qtek/Qtek.htm

CAB for WM6 and Former At&T not new AT&T
I am still using a pre-cingular sim and nmode.. anyone have a cab or the settings so i can manually set them?
/Evil

You talking about the original AT&T wireless (Blue sim?).
Here's a thread for you:
http://forums.cingular.com/cng/board/message?board.id=cingular&thread.id=38077

i Have an 8525 on suncom service and have been unable to get suncom web link and correct configure to access my email and send multimedia messages-any chance you have those configures

HTC wizard for European networks
http://forum.xda-developers.com/showthread.php?t=313725
(May add a proxy - does for T-Mob UK)
Gordon

naacdw said:
i Have an 8525 on suncom service and have been unable to get suncom web link and correct configure to access my email and send multimedia messages-any chance you have those configures
Click to expand...
Click to collapse
Have you even tried to google for this? I put in one simple query and presto
http://www.howardforums.com/archive/topic/668872-1.html

suncom cab fiile
hey,
i have SunCom and I am constantly flashing new roms to my wizard. Is there a cab file that will automatically input the correct mms/internet settings so that I don't have to re-enter it time and time again? Also, if there is not a cab file in existence already,how do I make a cab file with those settings?

O2 Homezone (icon and text) display

Hi there,
I'm new here but got so much out of this forum so I'm happy I can give something back to the community - though it's mainly interesting for the German folks.
After many hours I finally figured out how to activate the display of the home zone on the stock HTC Touch Pro as on the branded O2 XDA Diamond Pro.
1. Install the missing manila files "1bf4fdc4_manila", "5e8e48df_manila" and "6b3eaf1e_manila" which are included in the O2 branded ROM to your windows folder using total commander e.g..
2. Create the following registry keys and entries (e.g. with TaskManager or any other registry editor for PPC):
a) Under "HKEY_LOCAL_MACHINE\SOFTWARE\HTC" create a key named "HZI".
Under this key put the following entries:
"HZService version"="1.30.30448"
"Type"=dword:00000000
"Tag"=""
"LACIn2G"=dword:00000001
Under "HKEY_LOCAL_MACHINE\Services" create a key named "HZService".
Under this key put the following entries:
"DLL"="HZService.dll"
"Prefix"="HZS"
"Keep"=dword:00000001
"Order"=dword:00000008
"Index"=dword:00000000
Under "HKEY_LOCAL_MACHINE\SOFTWARE\OEM" create a key named "MASD".
Under this key put the following entries:
"HZService_O2DE"="1_30_30448_0"
3. Restart TouchFlo3D or Touch Pro itself.
That's it, the home zone symbol and the word "home" will be shown in the left top area at the same height as the operator logo (usually there is the date shown which moves underneath the big clock and is then situated right to the alarm clock). The same symbol but a in a small version will also be shown on the telephone screen left to the "backspace" symbol in the top area.
IMPORTANT: O2 currently does NOT support home zone display when registered in their 3G network (UMTS) but only in GSM, so either put your phone in GSM mode only or use the tone indicator offered by O2. To figure that out it took me quite a while since my phone was set to automatic and during testing never showed the symbol though it was correctly set up ...
Hope that helps a couple of you out there since that information I could not find anywhere on the web.
CU,
Vampyre
UPDATE: Okay, I got it now working on 3G as well - it turned out to be an O2 issue, not the Touch Pro's fault or anything on my side. For all having trouble with display of the symbol in 3G: Call the hotline and let them open a trouble ticket for you stating the problem. Maybe you'll have to try several times but it actually works. Currently it only stops working when in 3G mode HSDPA is available and shown on the TP display. But I'm working on that as well...

Cactus World said:
IMPORTANT: O2 currently does NOT support home zone display when registered in their 3G network (UMTS) but only in GSM, so either put your phone in GSM mode only or use the tone indicator offered by O2. To figure that out it took me quite a while since my phone was set to automatic and during testing never showed the symbol though it was correctly set up ...
Click to expand...
Click to collapse
On my xda Diamond Pro (ROM: 1.90.207.4 GER) I can see the homezone indicator in 3G mode.

schinge said:
On my xda Diamond Pro (ROM: 1.90.207.4 GER) I can see the homezone indicator in 3G mode.
Click to expand...
Click to collapse
Okay, since I don't have a XDA I cannot verify that. I got that information straight from the O2 hotline. But if you can I would appreciate an export of your registry to check if that can help to solve the issue as well as a copy of the "HZService.dll" located in the windows folder.
CU,
Vampyre

Could you please send me a CAB file? Thanks in advance.

Cactus World said:
Okay, since I don't have a XDA I cannot verify that. I got that information straight from the O2 hotline. But if you can I would appreciate an export of your registry to check if that can help to solve the issue as well as a copy of the "HZService.dll" located in the windows folder.
CU,
Vampyre
Click to expand...
Click to collapse
Under "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HZI" I have an additional entry named "HZService version" and the REG_SZ value "1.30.30448" and the entry "Tag" has the value "home". All other entries are identical to the entries you decribed above.
The missing homezone indicator could also be a SIM problem. I had this problem (missing indicator in 2G and/or 3G mode) several times when I got a new SIM (replacement or new multicard). Then the service hotline resent the homezone coordinates (once they had to send it 3 times) to my mobile (logged in to 3G network) and all worked perfect.

schinge said:
Under "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HZI" I have an additional entry named "HZService version" and the REG_SZ value "1.30.30448" and the entry "Tag" has the value "home". All other entries are identical to the entries you decribed above.
The missing homezone indicator could also be a SIM problem. I had this problem (missing indicator in 2G and/or 3G mode) several times when I got a new SIM (replacement or new multicard). Then the service hotline resent the homezone coordinates (once they had to send it 3 times) to my mobile (logged in to 3G network) and all worked perfect.
Click to expand...
Click to collapse
Okay, the tag value is set during the operation of the DLL, so it's "home" on mine too. The second entry I do have too; I just forgot to mention it in the first posting (gotta to add it).
Okay, the SIM might be a problem too, so I'll try your procedure as well (hopefully it's not the same person on the phone as when calling the first time and getting the above stated information about the lacking support for home zone in 3G).
The DLL is identical to mine, thanks for sending it anyway.;-)
I'd still like to compare my whole registry to yours...;-)

sonyuk143 said:
Could you please send me a CAB file? Thanks in advance.
Click to expand...
Click to collapse
Here you go. Please check if it works as expected, i.e. also means the installation because it's my first cab file I set up.

Doesnt work on XDA Orbit 2 (Polaris)
Hi there,
i'm using a XDA Orbit 2 (Polaris) with Touch-It M2d 3.6 and installed your .cab, but no homezone symbol on my Today screen =(
Does this .cab work for Polaris at all?
thx for your help
greets from Munich
Alex

alkumuc said:
Hi there,
i'm using a XDA Orbit 2 (Polaris) with Touch-It M2d 3.6 and installed your .cab, but no homezone symbol on my Today screen =(
Does this .cab work for Polaris at all?
thx for your help
greets from Munich
Alex
Click to expand...
Click to collapse
Actually this cab is only meant to be for the HTC Touch Pro aka Raphael as is the forum in which this post is located ;-)
If it can work for your Orbit 2 as well I cannot tell, but since you don't have the TouchFlo3D interface I doubt it.
CU,
Vampyre

Still no homezone icon on my today screen but on my contacts and dial screen of iPhone! Seems to be at the same places like in the original dialer. Thats all I need.
thanks
Alex

Thanks for your kind reply and cab file. I am using xda diamond, windows 6.1.
I am unsuccessful in installing on my device. My phone was already saying that this application is not suitable for my ROM.
Could you please provide the cab file for xda diamond.

EDIT: Whoops, I should have read the whole thread. @mods: please delete this post, it was redundant.

sonyuk143 said:
Thanks for your kind reply and cab file. I am using xda diamond, windows 6.1.
I am unsuccessful in installing on my device. My phone was already saying that this application is not suitable for my ROM.
Could you please provide the cab file for xda diamond.
Click to expand...
Click to collapse
Hmm, as I already stated, I've never made up a cab file before and I'm pretty new to this PDA stuff, so maybe somebody with more experience in making cabs could check what has to be done to make it work on Diamond Pro?
UPDATE: I guess I could fix the CAB now as I got more insight on this process...Could you try it out?

Thanks for your post. But my phone was unable to install this CAB.

Okay, here we go again, another try with the CAB. At least on mine it seems to install.
Thanks for trying.
CU,
Cactus World

I tried it on my Herald / Xda terra and didnt work as well :-( I dunno what the difference between the models is, but I also use Manila 2D (OpenTouch 7.7. ROM). Which program can I use to edit the registry? TaskManager didnt work here... Sorry, I seem to be quite untalented..

As I already stated, this method and DLL are *O*N*L*Y* valid for Touch Pro and Diamond. It needs TouchFlo3D to work. Manila 2D as well as other interfaces to WM will probably not work.
TaskManager works for me, but there are other registry editing tools out there. BTW, with TaskManager a separate tool and not the in Manila integrated task manager is meant.

I own HTC touch pro 2 (win mobile 6.1.; touchFLo Vs. 3.0 - it should be the same as touchFlo3d?). It is new (seems to be produced 05-2009) and unbranded.
I tried your cab. It installs and the registry entries are as you wrote in the beginning of this thread. I copied HZService.dll to the windows folder and restarted.
It does not work at all. What the heck could be the problem?
Hope this thread isn't closed yet.
Greetings from Berlin, Germany

Are you in a HSDPA area? As in previous posts noted the cab will not work when in HSDPA mode. A workaround is to disable the display of the "H" symbol which will give you the home zone icon but no "H" icon any more (though HSDPA speed when available will remain as quoted by other users).
CU,
Cactus World

I am in Berlin, Germany. This should be a HSDPA area but I always only have "G" on my phone. Any other ideas?

How To replace the UserAgent on WM6.1 roms ?

Has anyone found which registry key need to be changed ?
My browser keep sending "ie mobile 7.11"
Thanks!

Not sure what you are referring to. Do you mean the home page on internet explorer or that it always chooses the mobile version of web pages vs normal desktop page?

UserAgent is the string sent by the browser to any visited website.
In my case, I'd like to set this string to the same value as on the SPV C500 (Orange cellphone) to be allowed to visit Orange portal (and use their video content and stuff)

That I haven't encountered before. Could just be the device name in the settings menu but it might be something else.

MobileConfig I have Beta Version 1.3 and you can change it there.
Good Luck

thanks Mark, I'll give a try (but i'm a bit sceptical as your program is from Mar. 2007... And I tried to change the useragent string in the usual registry locations with no luck)

[PRJ]Raphael & Diamond, Japanese Input and SoftBank MMS CABs (update: 2009年3月23日)

[PRJ]Raphael & Diamond, Japanese Input and SoftBank MMS CABs (update: 2009年3月23日)
Ok, here is my first CAB project. It is a set of tools needed to enable proper Japanese text displaying, Japanese Input and SoftBank SMS/MMS system on HTC Raphael & Diamond (SoftBank models X05HT and X04HT) phones with non-Japanese ROMs.
CABs here were tested on clean WWE (English) ROMs, but there is no reason the shouldn't work on other ROMs, just make sure to uninstall other Japanese enabling software like decuma, CE-star, Askul's letsjapan... I decided to break this functionalities into three different CABs, in case someone only needs to display Japanese text, etc...
1. Displaying Japanese text
This one enables displaying of Japanese characters, like reading Japanese web pages, or using it for various Japanese dictionaries... The CAB is based on Askul's LetsJapan No6, but newer version of wince.nls taken from SoftBank Japanese X05HT 3.39.762.3 WM6.1 ROM. It should work on all devices, despite screen resolution...
LetsJapan WM6.1 r07
Update 1:
LetsJapan WM6.1 r09, Mincho (Serif) font variant. This variant will take about 10MB on your device.
​
2. Japanese Advanced IME
This is a new thing. It enables word prediction input in both English and Japanese, and unlike traditional WM5 & WM6 Japanese IME engines, SoftBank introduced this new IME in its newer ROMs. After installation, KeyTouch IME will become default. It only works in portrait mode, and in the case of landscape mode, IME will change to classic romaji or kana input. Kensaku and Tegaki IMEs are included. Also, settings for Japanese keyboard layout are in this CAB, so if you are using some different layout, you are on your own (there are plenty of posts around which explain how to change this). This CAB is only for VGA (480x640) devices (Planning to make QVGA version too, stay tuned)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Japanese Advanced IME r07
​
3. SoftBank MMS
Finally, people, this was tough nut to crack. The CAB here should work on any english ROM, but i had time to test it only on official HTC WWE. It will also install Softbank Internet connection (opensoftbank, that will NOT be defaulted), because a special connection GUIDs are required, so it is best to install this after hard reset. Also, it's heavily integrated into system, hard-reset to uninstall...
The bad thing is that SB MMS application is in Japanese only, and integration with WWE manila / TouchFLO is poor. For that sake, i managed to adopt SoftBank's manilla, check the 4th CAB in this post.
Good thing is that SMS & Sメール works in both directions. And, tatatattaaa, in combination with my Japanese IME CAB emoticons finally work as desired!
This CAB is based on extracted ArcSoftMMS version 5.0.2.23 files from SoftBank Japanese X05HT 3.39.762.3 WM6.1 ROM.
Please report any issues you may find...
Anybody interested in helping translating some MUIs ???
SoftBank MMS r093
​
4. SoftBank manilla (TouchFLO 3D)
This is just a manila / TouchFLO from SoftBank, in English, to support proper integration with MMS...
(Disable TouchFLO 3D in Today settings before installing)
SoftBank manilla
​
Disclaimer: the above CABs worked for me but I take no responsibility if you break your phone with them, get outrageous Internet bills, your girlfriend / wife suddenly starts to cheat on you or whatever... Use them at your own risk.
Also, some of the files from this CABs may be found on SoftBank X05HT / X04HT ROMs only, you may legally use these CABs only if you own these phones.

Zgembo said:
1. Displaying Japanese text
LetsJapan WM6.1 r07
Click to expand...
Click to collapse
First impressions:
LetsJapan turns my menu text really big and spaced-out. This may be actually be a good thing for some, as it lends to finger-friendliness on smaller screens. It unfortunately cuts back on the amount of options displayed at any one time though. Check first screenshot.
Minor point: it also sets startup orientation as portrait
.
2. Japanese Advanced IME
Japanese Advanced IME r07
Click to expand...
Click to collapse
First impressions:
Dual text-prediction rocks.
It breaks SPBKeyboard4's Japanese input. There is no option to enable Japanese input anymore. This worked with previous Japanese SIPs.
Seems to work with original LetsJapan6.
Doesn't enable auto-insertion of address/number by entering a contacts name in the To: field of SMS. がっかり.

larsuck said:
First impressions:
LetsJapan turns my menu text really big and spaced-out. This may be actually be a good thing for some, as it lends to finger-friendliness on smaller screens. It unfortunately cuts back on the amount of options displayed at any one time though. Check first screenshot.
First impressions:
Dual text-prediction rocks.
Click to expand...
Click to collapse
Agreed. Menu text is too big. Will try to make it smaller, when I finish playing with MMS...

Wow, way to go, Zgembo! Really looking forward to testing out the fruits of your labors.

Anybody seen this? IME 31J extracted from the Touch HD.
http://asukal.net/blog/?p=729
I actually did install it on an English Rom some time ago and it seemed to worked fine for typing/displaying Japanese as per Asukal's instructions. I can't remember if predictions worked though.
Anyway, there is a cab available from the above link.
Oh, please ignore this post if it is not relevant to this thread/or it is old information.

Jonathan24 said:
Wow, way to go, Zgembo! Really looking forward to testing out the fruits of your labors.
Click to expand...
Click to collapse
Looking great! I switched over to this setup. Couple bugs/problems:
1) the function keys seem to be mapped differently on my hardware keypad now. Is there any way to get it to be mapped US keyboard style?
2) how do I switch from japanese input to english input? The only way i can figure out how to do it is through making the keyboard romaji and the changing it to 英数. Is there a way to make it default to english input, and then to Japanese input only when needed?

This SIP is new ground to me, so I don't know if these solutions will work, but try and give them a shot.
drewnamis said:
Looking great! I switched over to this setup. Couple bugs/problems:
1) the function keys seem to be mapped differently on my hardware keypad now. Is there any way to get it to be mapped US keyboard style?
Click to expand...
Click to collapse
Install Schap's Advanced Config. There should be an option to change the keyboard layout.
drewnamis said:
2) how do I switch from japanese input to english input? The only way i can figure out how to do it is through making the keyboard romaji and the changing it to 英数. Is there a way to make it default to english input, and then to Japanese input only when needed?
Click to expand...
Click to collapse
Search through your registry for Option3. Change the data of this reg entry from 1 to D (hexadecimal). Close registry editor, soft reset and see if that did anything.

will give it a shot. I'll let you know what happens.

So something happened and it broke both my HW keyboard and the software one. I could no longer choose ABC in most of the keyboards, and when typing using the HW keyboard, it would input but not show up properly on the screen. Uninstalled the J input for now.

drewnamis said:
So something happened and it broke both my HW keyboard and the software one. I could no longer choose ABC in most of the keyboards, and when typing using the HW keyboard, it would input but not show up properly on the screen. Uninstalled the J input for now.
Click to expand...
Click to collapse
Did it do that after you tried my advice? (If so, sorry!)

softbank settings and mms working
Hi, since Zgembo has been quiet regarding the setting up of MMS, I thought I would share my experiences (sorry if I jumped the gun Zgembo; and also feel free to share your connection experience which may be different to mine)
MMSlite 1.1.303 works fine. See Larsuck's thread: http://forum.xda-developers.com/showthread.php?t=365760
To get the Softbank connection going (which will also work with the softbank flat plan) get these files: http://forum.xda-developers.com/showthread.php?t=298031
Install connSBM (non-proxy version) as per instructions. Then you will need a new copy of wifiwake.exe (to replace the one included in the above .zip)
Go here:http://forum.xda-developers.com/showthread.php?t=462994&highlight=wifiwake
download and copy to the /windows directory, with the out.xml from the connSBM file. Make sure you RUN the wifiwake.exe (from the windows directory after moving it there) soft-reset.
Now, after that, all should work fine with MMSlite and other things that need to connect to the softbank connection.
However, me wants to get it working with Arcsoft's MMS Composer which is included with most roms by default and is prettier than mmslite and has more features, etc, etc).
So far I have done the following:
Note: this allows for sending messages via Arcsoft's MMS Composer and not receiving so please only follow these instructions if you want to test - otherwise stick to mmslite, cause everything works)
Go to Composer --> menu --> MMS Options
Severs -->New
Server name : mailwebservice.softbank.ne.j
Gateway : sbmmsproxy.softbank.ne.jp
Port number : 8080
Server address : http://mms
Connect via : The Internet
　
Send Limit : 300k
WAP Version : WAP 2.0
(make this default and delete the sample one!!)
Now, edit the registry as follows:
HKLM¥Software¥Arcsoft¥ArcSoft MMS UA¥Config¥mm1
　WAP2DefaultPort : 80
　
HKLM¥Software¥Arcsoft¥ArcSoft MMS UA¥Config¥mm1¥MMSCSetting¥Name : mailwebservice.softbank.ne.jp (make sure it has the final "j"!)
　　
HKLM¥Software¥Arcsoft¥ArcSoft MMS UA¥Config¥mm1¥WspHeader
　Accept-Language : jp
　User-Agent : SoftBank/1.0/708SC/SCJ001 Browser/NetFront/3.3
　Accept-Charset : Shift-JIS, UTF-8, EUC-JP, ISO-2022-JP
adapted from: http://otakumaniax.blog34.fc2.com/blog-entry-16.html
JAPANESE LANGUAGE WARNING
Now, my dilemma: Using the above settings, it is possible to SEND mms messages using arcsoft's software, yet it refuses to RECEIVE messages. I have tried various things, yet are unable to work out how to make arcsoft receive. (It does not even connect to try and receive; it just sits there doing nothing no how many test mails I send from my gmail account)
So, if anybody can solve this, that would be great. Meanwhile, I am stuck with boring old mmslite....
Disclaimer: the above worked for me as much as I described and I take no responsibility if you should get outrageous bills for internet usage/and or you bust your phone through editing the registry.

Thanks for the links, Tora. As far as wifiwake is concerned, I'm just using the default AT&T rom for now, with Larsuck's connection cab posted here. Is there any difference between that and what you posted?

Jonathan24 said:
Thanks for the links, Tora. As far as wifiwake is concerned, I'm just using the default AT&T rom for now, with Larsuck's connection cab posted here. Is there any difference between that and what you posted?
Click to expand...
Click to collapse
I'm pretty sure it is the same thing. WIFIwake was the program previously used to input the password contained in the SBM connection cab.
And it is RayB's cab. Not mine. I don't want to take credit (or responisbility ) I just started the thread.

To get the Softbank connection going (which will also work with the softbank flat plan) get these files: http://forum.xda-developers.com/showthread.php?t=298031
Install connSBM (non-proxy version) as per instructions. Then you will need a new copy of wifiwake.exe (to replace the one included in the above .zip)
Go here:http://forum.xda-developers.com/show...light=wifiwake
Click to expand...
Click to collapse
Hi, quick question regarding the data connection to softbank
I'm using an unlocked HTC Touch Pro with Softbank,
All I did to get the Softbank internet access is add the Softbank access point: open.softbank.ne.jp with the corresponding password as per this blog post.
I've been using it under the packet-hodai plan for a few months now with no problems although I'm using the 9,800yen plan and recently asked to switch to the 5,700yen plan.
Your instructions are much more complicated, what's the difference with my setup?
Thanks!

Benji99 said:
Hi, quick question regarding the data connection to softbank
I'm using an unlocked HTC Touch Pro with Softbank,
All I did to get the Softbank internet access is add the Softbank access point: open.softbank.ne.jp with the corresponding password as per this blog post.
I've been using it under the packet-hodai plan for a few months now with no problems although I'm using the 9,800yen plan and recently asked to switch to the 5,700yen plan.
Your instructions are much more complicated, what's the difference with my setup?
Thanks!
Click to expand...
Click to collapse
Your are talking about internet access, and this thread is talking about MMS access.
Tora201 is talking about getting S!Mail (Softbank's proprietary MMS) working with Arcsoft. Arcsoft isn't built to access S!Mail, so that's why his instructions are complicated. That is also why they don't work perfectly.
Completely unrelated to S!Mail access, the cab file mentioned by Jonathan24 automatically creates the same Internet Access Protocol that your link points to. There is no significant difference between the AP this cab creates and the one you inputted by hand.

Jonathan24 said:
Thanks for the links, Tora. As far as wifiwake is concerned, I'm just using the default AT&T rom for now, with Larsuck's connection cab posted here. Is there any difference between that and what you posted?
Click to expand...
Click to collapse
If Larsuck's cab works, then fine! I have not tried it. All I know that if you use the method I described then you will need the modified wifiwake. The original one was designed for the X01HT.
As for the post about the password, well -- I think everybody agreed some months ago it was not a good idea to post it around XDA - developers.
Regarding MMS, I am hoping somebody can figure out how to get the "receive" for MMS going under Arcsoft..... then we won't need mmslite anymore! (yay)

tora201 said:
Regarding MMS, I am hoping somebody can figure out how to get the "receive" for MMS going under Arcsoft..... then we won't need mmslite anymore! (yay)
Click to expand...
Click to collapse
I think Zgembo is working on that. He is trying to extract the modified Arcsoft from X04HT. Apparently it somehow works with S!Mail.

Guys!
Does anyone have Japanese IME for QVGA (HTC Polaris)? Could someone share it please? Thank you!

dim4x4 said:
Guys!
Does anyone have Japanese IME for QVGA (HTC Polaris)? Could someone share it please? Thank you!
Click to expand...
Click to collapse
I know it's a big site, but try searching around a little more next time.
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip

Thanks larsuck, I tried that, but my problem remained: Kensaku and Tegaki dont work. I read comments to this forum http://asukal.net/blog/?p=96 many people have same problem and there seems to be no solution. Looks like it's a problem with device memory allocation for SIPs. I tried this IME and IME from flinx1 and none of them show those two keyboards. So I was wondering if there's another IME that I can try? Zgembo said in the first post "(Planning to make QVGA version too, stay tuned)" - so I'll wait for that and maybe it will work. Or... i may try another ROM, though I really like the one I have.