Hi all,
I need to travel around for business trips and I will need to add IDD code and area code in front of the phone number before I dial when I travel. I found that it is very inconvenient to use O2 mini, as I cannot edit the number before I dial. Anyone knows if I can change the setting and could amend the phone on the dialer? Or I will be grateful if there is a dialer programme to replace the default one on O2 mini. Thanks
Hi.
Sorry I dont know of any proggi that will do this for you, but if i where you I would just start writing in those +XX numbers in front of every number in your contacts, and make it a habbit to do so every time you create a new contact!
Maybee some else knows of a proggi to do this for you
Thanks for your input. I am very delighted to found Bong's Workship Prefix Dial which could solve my problem well and it is free. :wink:
Hello,
After upgrading to WM6, I found when viewing SMS messages that the left softkey no longer gave the option new, just delete.
I put together this little shortcut which will send you straight to a new SMS.
I then mapped the shortcut to the now defunct video call button.
Download and unzip the attached file. Copy the extracted file to somewhere on you device (I put in in \Windows\AppButtons) and then edited the following registry entry:
HKLM\Software\Microsoft\Shell\Keys\40C2
amending Default from "\Windows\AppButtons\Video Call.lnk" to "\Windows\AppButtons\New SMS.lnk" (you will need to amend this to wherever you put the New SMS.lnk file)
Hope that helps, but you are amending and playing with your phone/registry so I take no responsibility for anything you mess up!
Sorry if this is a known resolution, but I hadn't seen anything specifically in this forum, and not one with a complete solution.
Hi Steve,
Thanks for the little tool. I was wondering if the 'Delete' option could be turned into the old 'New' setting without loosing the video call button?
AFAIK No!
I've searched the forums and nobody seems to have an answer for this. I can't find where in the registry to edit either (I'm no expert of registry settings)
This seems like the only option for now. I think the softkeys in the mail app are hardcoded, so would need someone with more ability than I to take apart the tmail.exe file and make the required alterations. Still after nearly a year of ownership I've never used the video call button, and find it handy to be able to go to a new sms from anywhere on the device. Maybe this will be addressed in a future build of WM6? Or possibly someone will give the option of either NEW / DELETE...
Well.. Thank you for the workaround.
I'm looking for a solution, too.
I HATE that "delete" button, it's really boring!
Please help me!
Hi!
Please help to me! i want to create a shortcut send SMS in PPC, but i don't know how to do that? (example: send "GPRS +" to 8125 by SMS)
Many thanks
1. I don't understand what you want to do.
2. This is the forum for the HTC Universal device, judging by your username, you'd be better asking your question here
(anyone else think that HTC has made life a little complicated calling one of their models the UNIVERSAL...)
try vjphonetools do a search on the forums
Please help me!
Hi!
I want to design a page web run in PPC, so in this page, i create a hyperlink. when i click this hyperlink , the PPC will be send "GPRS +" to 8125 by SMS.
Many thanks.
Awesome, this is exactly what I needed!
Hi there,
I'm new here but got so much out of this forum so I'm happy I can give something back to the community - though it's mainly interesting for the German folks.
After many hours I finally figured out how to activate the display of the home zone on the stock HTC Touch Pro as on the branded O2 XDA Diamond Pro.
1. Install the missing manila files "1bf4fdc4_manila", "5e8e48df_manila" and "6b3eaf1e_manila" which are included in the O2 branded ROM to your windows folder using total commander e.g..
2. Create the following registry keys and entries (e.g. with TaskManager or any other registry editor for PPC):
a) Under "HKEY_LOCAL_MACHINE\SOFTWARE\HTC" create a key named "HZI".
Under this key put the following entries:
"HZService version"="1.30.30448"
"Type"=dword:00000000
"Tag"=""
"LACIn2G"=dword:00000001
Under "HKEY_LOCAL_MACHINE\Services" create a key named "HZService".
Under this key put the following entries:
"DLL"="HZService.dll"
"Prefix"="HZS"
"Keep"=dword:00000001
"Order"=dword:00000008
"Index"=dword:00000000
Under "HKEY_LOCAL_MACHINE\SOFTWARE\OEM" create a key named "MASD".
Under this key put the following entries:
"HZService_O2DE"="1_30_30448_0"
3. Restart TouchFlo3D or Touch Pro itself.
That's it, the home zone symbol and the word "home" will be shown in the left top area at the same height as the operator logo (usually there is the date shown which moves underneath the big clock and is then situated right to the alarm clock). The same symbol but a in a small version will also be shown on the telephone screen left to the "backspace" symbol in the top area.
IMPORTANT: O2 currently does NOT support home zone display when registered in their 3G network (UMTS) but only in GSM, so either put your phone in GSM mode only or use the tone indicator offered by O2. To figure that out it took me quite a while since my phone was set to automatic and during testing never showed the symbol though it was correctly set up ...
Hope that helps a couple of you out there since that information I could not find anywhere on the web.
CU,
Vampyre
UPDATE: Okay, I got it now working on 3G as well - it turned out to be an O2 issue, not the Touch Pro's fault or anything on my side. For all having trouble with display of the symbol in 3G: Call the hotline and let them open a trouble ticket for you stating the problem. Maybe you'll have to try several times but it actually works. Currently it only stops working when in 3G mode HSDPA is available and shown on the TP display. But I'm working on that as well...
Cactus World said:
IMPORTANT: O2 currently does NOT support home zone display when registered in their 3G network (UMTS) but only in GSM, so either put your phone in GSM mode only or use the tone indicator offered by O2. To figure that out it took me quite a while since my phone was set to automatic and during testing never showed the symbol though it was correctly set up ...
Click to expand...
Click to collapse
On my xda Diamond Pro (ROM: 1.90.207.4 GER) I can see the homezone indicator in 3G mode.
schinge said:
On my xda Diamond Pro (ROM: 1.90.207.4 GER) I can see the homezone indicator in 3G mode.
Click to expand...
Click to collapse
Okay, since I don't have a XDA I cannot verify that. I got that information straight from the O2 hotline. But if you can I would appreciate an export of your registry to check if that can help to solve the issue as well as a copy of the "HZService.dll" located in the windows folder.
CU,
Vampyre
Could you please send me a CAB file? Thanks in advance.
Cactus World said:
Okay, since I don't have a XDA I cannot verify that. I got that information straight from the O2 hotline. But if you can I would appreciate an export of your registry to check if that can help to solve the issue as well as a copy of the "HZService.dll" located in the windows folder.
CU,
Vampyre
Click to expand...
Click to collapse
Under "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HZI" I have an additional entry named "HZService version" and the REG_SZ value "1.30.30448" and the entry "Tag" has the value "home". All other entries are identical to the entries you decribed above.
The missing homezone indicator could also be a SIM problem. I had this problem (missing indicator in 2G and/or 3G mode) several times when I got a new SIM (replacement or new multicard). Then the service hotline resent the homezone coordinates (once they had to send it 3 times) to my mobile (logged in to 3G network) and all worked perfect.
schinge said:
Under "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HZI" I have an additional entry named "HZService version" and the REG_SZ value "1.30.30448" and the entry "Tag" has the value "home". All other entries are identical to the entries you decribed above.
The missing homezone indicator could also be a SIM problem. I had this problem (missing indicator in 2G and/or 3G mode) several times when I got a new SIM (replacement or new multicard). Then the service hotline resent the homezone coordinates (once they had to send it 3 times) to my mobile (logged in to 3G network) and all worked perfect.
Click to expand...
Click to collapse
Okay, the tag value is set during the operation of the DLL, so it's "home" on mine too. The second entry I do have too; I just forgot to mention it in the first posting (gotta to add it).
Okay, the SIM might be a problem too, so I'll try your procedure as well (hopefully it's not the same person on the phone as when calling the first time and getting the above stated information about the lacking support for home zone in 3G).
The DLL is identical to mine, thanks for sending it anyway.;-)
I'd still like to compare my whole registry to yours...;-)
sonyuk143 said:
Could you please send me a CAB file? Thanks in advance.
Click to expand...
Click to collapse
Here you go. Please check if it works as expected, i.e. also means the installation because it's my first cab file I set up.
Doesnt work on XDA Orbit 2 (Polaris)
Hi there,
i'm using a XDA Orbit 2 (Polaris) with Touch-It M2d 3.6 and installed your .cab, but no homezone symbol on my Today screen =(
Does this .cab work for Polaris at all?
thx for your help
greets from Munich
Alex
alkumuc said:
Hi there,
i'm using a XDA Orbit 2 (Polaris) with Touch-It M2d 3.6 and installed your .cab, but no homezone symbol on my Today screen =(
Does this .cab work for Polaris at all?
thx for your help
greets from Munich
Alex
Click to expand...
Click to collapse
Actually this cab is only meant to be for the HTC Touch Pro aka Raphael as is the forum in which this post is located ;-)
If it can work for your Orbit 2 as well I cannot tell, but since you don't have the TouchFlo3D interface I doubt it.
CU,
Vampyre
Still no homezone icon on my today screen but on my contacts and dial screen of iPhone! Seems to be at the same places like in the original dialer. Thats all I need.
thanks
Alex
Thanks for your kind reply and cab file. I am using xda diamond, windows 6.1.
I am unsuccessful in installing on my device. My phone was already saying that this application is not suitable for my ROM.
Could you please provide the cab file for xda diamond.
EDIT: Whoops, I should have read the whole thread. @mods: please delete this post, it was redundant.
sonyuk143 said:
Thanks for your kind reply and cab file. I am using xda diamond, windows 6.1.
I am unsuccessful in installing on my device. My phone was already saying that this application is not suitable for my ROM.
Could you please provide the cab file for xda diamond.
Click to expand...
Click to collapse
Hmm, as I already stated, I've never made up a cab file before and I'm pretty new to this PDA stuff, so maybe somebody with more experience in making cabs could check what has to be done to make it work on Diamond Pro?
UPDATE: I guess I could fix the CAB now as I got more insight on this process...Could you try it out?
Thanks for your post. But my phone was unable to install this CAB.
Okay, here we go again, another try with the CAB. At least on mine it seems to install.
Thanks for trying.
CU,
Cactus World
I tried it on my Herald / Xda terra and didnt work as well :-( I dunno what the difference between the models is, but I also use Manila 2D (OpenTouch 7.7. ROM). Which program can I use to edit the registry? TaskManager didnt work here... Sorry, I seem to be quite untalented..
As I already stated, this method and DLL are *O*N*L*Y* valid for Touch Pro and Diamond. It needs TouchFlo3D to work. Manila 2D as well as other interfaces to WM will probably not work.
TaskManager works for me, but there are other registry editing tools out there. BTW, with TaskManager a separate tool and not the in Manila integrated task manager is meant.
I own HTC touch pro 2 (win mobile 6.1.; touchFLo Vs. 3.0 - it should be the same as touchFlo3d?). It is new (seems to be produced 05-2009) and unbranded.
I tried your cab. It installs and the registry entries are as you wrote in the beginning of this thread. I copied HZService.dll to the windows folder and restarted.
It does not work at all. What the heck could be the problem?
Hope this thread isn't closed yet.
Greetings from Berlin, Germany
Are you in a HSDPA area? As in previous posts noted the cab will not work when in HSDPA mode. A workaround is to disable the display of the "H" symbol which will give you the home zone icon but no "H" icon any more (though HSDPA speed when available will remain as quoted by other users).
CU,
Cactus World
I am in Berlin, Germany. This should be a HSDPA area but I always only have "G" on my phone. Any other ideas?
Hello everyone,
After a lot of "tricks& hicks" on my phone, I've lost the ability to type sms, mail and MMS...
I mean I can type the To: with letters, but when typing any letter in the sms area, nothing except a beep.
I've surfed the forum but nothing, I think I changed in the registry the type of input specificity of the tmail.exe when trying to install HTC keyboard, EZ input...
but can't find where.
Does anyone faced that before, and could give me another answer than Hard Rest ?
Best regards, ad long live XDA
Digging...
Up
Seems no one ever had this strange sms issue
Hey hey,
I've just seen the answer of skribzy in this topic this night, and it WORKS!!!
big big up to you
QUote:
I had this problems - First get 'HD Tweak'
Open HD Tweak and go down to section 20 (Keyboard)
Disable T9 mode - I think that did it!
Regards and Xda rocks!!!
+1
Cheers Jeant, you just fixed my Diamond from enterring numbers rather than letters in SMS with the keyboard set to phonepad. That'll learn me for changing EVERY setting at once in diamond tweak, if it ain't broke don't fix...
Good evening everyone,
I have had the Verizon Touch Pro 2 for three days now and everything works great except one annoyance. Does anyone know any way to disable the “pop up message” after I send a SMS message. It’s so annoying. I’ve tried the following and I’m trying to get rid of the notification message, NOT just the sound.
- I’ve tried editing the registry by changing the values of the SMSNoMsg to 1 and 0 and no luck.
- If I change the value from 1 to 0, that will get rid of the Microsoft version of the alert window, but the darn HTC version of the alert comes on!
- I’ve looked at the HKLM part of the registry and even made a new DWORD and no success at all.
Any thoughts or ideas from anyone are greatly appreciated, because it’s very annoying that I have to see that message and hear that tone when I send out a text.
Thank you in advance and please let’s keep this thread to the question that has been asked.
NEVERMIND... saw a new thread with the solution - Thank you
Saw the new thread that has the solution...
Could you post link in this thread or PM me the link to the fix.
Thanks
would also love a solution
was already posted. just scroll down a few threads
http://forum.xda-developers.com/showthread.php?t=561443