Hi All
I have Dev G1 i was enjoying it until one day i decided i want more ,
so i went on line looking for images and i found one that i liked
which includes the multy touch and the root access i have followed the
steeps and it worked ,
until i received a call form my operator claiming that my mobile is
sending bulk SMS :s .
so i want the device back to its original state now i have downloaded
the radio image and the recovery image from HTC and i followed the
steps i have already done it once when i updated from 1.0 to 1.1 , any
way the radio image updated successfully , and i have copied the
recovery image and restarted with home and then i pressed Alt+s .. and
devices shows that its updating but nothing its the same with the same
SMS problem ,
so i wanted to try the fast boot i have found the fast boot screen
changed from the skater android to some screen with rainbow colors and
adb cant detect the device and i have T-mobile shows up when i start
the dev it shouldn't be there , any way all i want is to have my
mobile back
My current status is :
Model number
T-Mobile G1
Frimware version
1.1
Baseband version
62.33.20.08H_1.22.14.11
Kernel
2.6.25-01843-gfea26b0
[email protected] #1
Build Number
Kila-user 1.1 PLAT-RC33 126986
OTA-rel-keys,release-keys
Note i have followed the steps from this link
http://hehe2.net/gadgets/howto-multitouch-tethering-task-manager-for-android-g1/
Pleaaaase help me
maybe this has something to do with myFav.
are you with T-mobile ?
No
Hi
No I'm not with T-mobile , I'm from jordan .
Get JF ADP1.1 or Haykuro's firmware. MyFaves is causing it, and sending SMS thinking you are on T-Mobile.
Thank you , i will search for JF ADP1.1 , but is there anyway to restore it as i got it ?
as I guessed in my first reply, since you are not with T-Mobile and you have myFav preinstalled, it sends sms to the service provider. Its an application that has to do with a plan provided from T-mobile.
this link includes the latest builds of JF including ADP1.1h.
Thx alot
Thanks allot Nayyak and coolbho3000 i have downloaded the holiday update by JesusFreke and its working , though i still want to ask if there is a way to get my phone back the the original 1.1
another problem
Hi
After I have installed JFv1.43_Holiday.zip , and every thing was cool , untill i decided i want to call my friend and each time i enter the dialer or some one calls me i got the following error
The process android.process.acore has stopped unexpectedly . please try again
i have restarted the device i have tryed again over and over but nothing changed .
Thank you in advance
Re-download update, wipe, install, wipe. Fixes 9 out of 10 bugs.
mshayeb said:
Hi
After I have installed JFv1.43_Holiday.zip , and every thing was cool , untill i decided i want to call my friend and each time i enter the dialer or some one calls me i got the following error
The process android.process.acore has stopped unexpectedly . please try again
i have restarted the device i have tryed again over and over but nothing changed .
Thank you in advance
Click to expand...
Click to collapse
You should do a wipe when you change to a different build (e.g. from RC to ADP or vice versa).
Thanks
It's all good now , thanks all for the tips
official adp 1.1 is here:
http://member.america.htc.com/download/web_materials/ADP/signed-dream_devphone-ota-142608.zip
this is the complete recevery, image+ radio rom.
Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...
Hello,
I received a notification that 2.3.4 update available for my phone (Unbranded bought from Amazon.co.uk, I am on o2 and rooted). I tried to download that update and tried install it but it always stuck on startup showing error icon (Exclamation mark and Android green guy logo).
But when I took the battery out and put back in it works… showing old 2.3.3 not the new version.
I factory reset it but still same issue.
Anyone having same issue or solution.
Before anyone start slamming me… I tried to search it but unable to find that particular issue resolution.
Please HELP.
Thanks
raheelqureshi said:
Hello,
I received a notification that 2.3.4 update available for my phone (Unbranded bought from Amazon.co.uk, I am on o2 and rooted). I tried to download that update and tried install it but it always stuck on startup showing error icon (Exclamation mark and Android green guy logo).
But when I took the battery out and put back in it works… showing old 2.3.3 not the new version.
I factory reset it but still same issue.
Anyone having same issue or solution.
Before anyone start slamming me… I tried to search it but unable to find that particular issue resolution.
Please HELP.
Thanks
Click to expand...
Click to collapse
Wrong section.
Make sure you're on stock recovery.
Sorry, I thought this is the right section.
Also can you please explain a little bit more what is stock recovery?
Thanks
MOD can you please move to correct section. Thanks
raheelqureshi said:
...... and rooted). I tried to .......
Click to expand...
Click to collapse
I think this is your problem. You can not install the update if you are rooted.
To the OP:
If you don't mind losing your data (backup with Titanium Backup as a precaution) just flash the 1.45.401.2 RUU - gives you 2.3.4 and then you can just root again and restore your data if you did decide to back it up first
Hi Everyone:
I got a Samsung S4(GT-I9505) a few days, rooted it and put up cyanogenmod by using the cyanogenmod installer. It installed v 10.2 snapshot.
However today morning, I couldnt access the internet with my phone (over 3G/LTE). Wifi works fine. I get the 3G/ LTE icon in the status bar, but they are grayed out (as opposed to being blue). I tried installing another cyanogen mod version, but it didnt help either.
I am thinking something might be wrong with the hardware. So I might have to return it , but I will need to unroot my device and put up samsung firmware on it. I needed some help with this:
1. How can I find firmware that will work on my phone? My model number is GT-I9505, the cyanogen mod is running baseband I9505XXUEMK8 - how can i determine if this is correct baseband?
2. When I tried running the triangle remove app to unroot the device, I again had problems - at the point where the phone is supposed to re boot into download mode, it just starts up normally - is this because I am running cyanogen and I need stock for triangle remove to work?
Thank you so much for any help!
Quote
MultiQuote
Edit
I bought an Acer A700 tablet off ebay, was supposed to be new unused condition. Booted it up and it had no system bar at bottom of page. That means you can't get out of any app you have to reboot, useless. Thru reading on site and exploring this tab i found out it has super user installed on it and on bootup in the left hand corner it reads "boot loader ICS-MRI 7173de1 (unlock mode)" every thing on the tablet seems to work except no navigation bar, no circle in center, and no status info no bar at all full screen. I have played with this thing been on Acer chat and they say hard ware failure. That is before i new it was rooted, i guess that is the reason the update he wanted me to try did not work. I don't know if i try a new OS system if that will even work. I am 68 years old and this is my first android tablet, new ground for me. Most every thing i read is above my knowledge, would appreciate any advice i might just try it. thanks ahead of time
demo mode
Is there a demo mode on this acer A700 and if so where to look thanks
easyreble said:
I bought an Acer A700 tablet off ebay, was supposed to be new unused condition. Booted it up and it had no system bar at bottom of page. That means you can't get out of any app you have to reboot, useless. Thru reading on site and exploring this tab i found out it has super user installed on it and on bootup in the left hand corner it reads "boot loader ICS-MRI 7173de1 (unlock mode)" every thing on the tablet seems to work except no navigation bar, no circle in center, and no status info no bar at all full screen. I have played with this thing been on Acer chat and they say hard ware failure. That is before i new it was rooted, i guess that is the reason the update he wanted me to try did not work. I don't know if i try a new OS system if that will even work. I am 68 years old and this is my first android tablet, new ground for me. Most every thing i read is above my knowledge, would appreciate any advice i might just try it. thanks ahead of time
Click to expand...
Click to collapse
Ok, so whoever you bought it from, told you an outright lie. The bootloader is unlocked, and, it most likely has a custom OS installed on it. You can check this by going into "Settings" "About Tablet" and seeing what is installed on it.
Or,
The previous owner had root access (obviously) and went mucking around with the SystemUI.apk and goobered something up (most likely). In fact, I would guess he had CM installed and didn't like the way the nav icons were (in the center) and tried doing something about it by modifying files he had no idea of what to do.
The most simple fix, would just be to install a fresh version of either a custom ROM, or, revert it back to a stock factory ROM. Both of which are relatively easy to do.
MD
EDIT: Other things to look for now that I think about it. Check your applications and see if any of the following are installed.
Launcher (Nova, Go, etc) These sometimes have an option to disable the system bar (Nav Bar).
ExPosed Installer - This allows loading of custom exposed frameworks mods that several have the option to disable the System Bar (nav bar)
Any Nav Bar/System Bar "Hide" application. These at one time were useful to open more display real estate for games. (not many use them anymore)
Those applications you can safely uninstall through Settings/Applications, then reboot.
Other than that, I can't think of anything else. Will wait till you tell us which OS is installed (CM; Cyanogen Mod, PA; Paranoid Android, etc)
Oh, and one more thing. Stop talking to those folks on Acer Chat. This is a software issue, and not a Hardware issue. This I can promise.
easyreble said:
Is there a demo mode on this acer A700 and if so where to look thanks
Click to expand...
Click to collapse
"Demo" mode, is not a configurable option on most devices. In reality, it is a custom software from Acer that is installed for Store Display purposes. Several items have been left out of the build, specifically to prevent casual customers from mucking things up.
This is generally fixed by installing a full ROM.
MD
Moscow Desire said:
Ok, so whoever you bought it from, told you an outright lie. The bootloader is unlocked, and, it most likely has a custom OS installed on it. You can check this by going into "Settings" "About Tablet" and seeing what is installed on it.
Or,
The previous owner had root access (obviously) and went mucking around with the SystemUI.apk and goobered something up (most likely). In fact, I would guess he had CM installed and didn't like the way the nav icons were (in the center) and tried doing something about it by modifying files he had no idea of what to do.
The most simple fix, would just be to install a fresh version of either a custom ROM, or, revert it back to a stock factory ROM. Both of which are relatively easy to do.
MD
EDIT: Other things to look for now that I think about it. Check your applications and see if any of the following are installed.
Launcher (Nova, Go, etc) These sometimes have an option to disable the system bar (Nav Bar).
ExPosed Installer - This allows loading of custom exposed frameworks mods that several have the option to disable the System Bar (nav bar)
Any Nav Bar/System Bar "Hide" application. These at one time were useful to open more display real estate for games. (not many use them anymore)
Those applications you can safely uninstall through Settings/Applications, then reboot.
Other than that, I can't think of anything else. Will wait till you tell us which OS is installed (CM; Cyanogen Mod, PA; Paranoid Android, etc)
Oh, and one more thing. Stop talking to those folks on Acer Chat. This is a software issue, and not a Hardware issue. This I can promise.
Click to expand...
Click to collapse
You are correct, i will never talk to acer support again. I am getting ready to install a rom if i can figure out which one to start with. It has Adroid Veersion 4.0.4 Kernal version 2.6.39.4+ Boot loader ICS-MRI 7173de1 (unlock mode) It has superuser app installed, I did download an app which gave me a navigation bar that i am using till i can get a rom installed. My problem is that looks like i need to upgrade this 4.0.4 ICS before i can install the up to date roms is that correct. Thanks for helping be get this straight this is a lot for an old man to take in lol.
easyreble said:
You are correct, i will never talk to acer support again. I am getting ready to install a rom if i can figure out which one to start with. It has Adroid Veersion 4.0.4 Kernal version 2.6.39.4+ Boot loader ICS-MRI 7173de1 (unlock mode) It has superuser app installed, I did download an app which gave me a navigation bar that i am using till i can get a rom installed. My problem is that looks like i need to upgrade this 4.0.4 ICS before i can install the up to date roms is that correct. Thanks for helping be get this straight this is a lot for an old man to take in lol.
Click to expand...
Click to collapse
4.0.4 should be the original ICS ROM. If you get it installed, it should get you a locked bootloader, and hopefully offer the upgrade to JellyBean (4.1.x I believe)
Don't worry about age, I'm not far behind you
Have an issue, just PM me and I'll see if I can help.
MD
Moscow Desire said:
4.0.4 should be the original ICS ROM. If you get it installed, it should get you a locked bootloader, and hopefully offer the upgrade to JellyBean (4.1.x I believe)
Don't worry about age, I'm not far behind you
Have an issue, just PM me and I'll see if I can help.
MD
Click to expand...
Click to collapse
No that is what is on my tablet now unlocked and rooted. thanks. i am not clear as to get it upgraded form 4.0.4 and not sure if i need to upgrade to put new rom on it, and which one to work with. I have all my info downloaded on my computer, got to get a cable to work with. Just not sure if i can put the newest version on it without flashing it back to stock locking the boot loader upgrading and then rooting it again just to much i may need to take a break after 3 days of reading, but i have learned a lot. thanks what do u think
easyreble said:
No that is what is on my tablet now unlocked and rooted. thanks. i am not clear as to get it upgraded form 4.0.4 and not sure if i need to upgrade to put new rom on it, and which one to work with. I have all my info downloaded on my computer, got to get a cable to work with. Just not sure if i can put the newest version on it without flashing it back to stock locking the boot loader upgrading and then rooting it again just to much i may need to take a break after 3 days of reading, but i have learned a lot. thanks what do u think
Click to expand...
Click to collapse
Well, 4.0.4 ICS (ice cream sandwich) is the OS these tablets were shipped with. Then, it generally, after some days, would upgrade to 4.1x (jelly bean) Gotta love Google and the names.
Now, considering your tablet has SU (Superuser), and and unlocked bootloader, means somebody mucked with it, hence the missing NAV(Sys) bar. Dude undoubtedly mucked around with things.
As I stated before, this can happen due to several different reasons. How it got to that point, who knows.... In testing ROMs, Ive had this issue by installing a different SystemUI.apk that didn't match all the other files, Or, by "dirty" flashing a ROM without wiping /System partition.
Basically, to get it back to a completely stock A700, you will need to install a stock Factory A700 ROM. the 4.0.4 version. Should be able to find one quite easily, but if not, let me know and I'll help.
Basically, you rename that Stock ROM to "update.zip", copy it to ext SD, then boot the tablet holding "VOL+ then PWR and it "should see the zip and start to install it. "Should".
If not, then I can walk you through the steps to install a custom recovery, and we can do it that way. Acer, with JellyBean, actually has a somewhat recovery menu. Not sure if the 4.0.4 has it or not. Been too long. It may just look for "update.zip" and try and install it.
So will just have to see how it plays out.
For my own, I use "fastboot" so install image files to revert back, but that's just me. Also I have an A701, so it wouldn't do you much good
Same hardware so to speak, except for the 3g part and some different files.
MD