Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...
Related
I have previously upgraded to RWE wm6, now the official ATT upgrader says "you have a newer version of this software" and wont update to the latest ROM. Any suggestions to fool the updater and install official WM6 release?
Thanks in advance- this forum always amazes me!!
Is a simple edit of the payload file all thats needed here?
File Edit
DocKill said:
I have previously upgraded to RWE wm6, now the official ATT upgrader says "you have a newer version of this software" and wont update to the latest ROM. Any suggestions to fool the updater and install official WM6 release?
Thanks in advance- this forum always amazes me!!
Is a simple edit of the payload file all thats needed here?
Click to expand...
Click to collapse
Yes.
http://forum.xda-developers.com/showthread.php?t=345531
Thanks
Awesome as always!! Thanks!!!!
Next question....Installer gets through initial phase, treo gets 4 dark colored bars, then connection is lost and install cant complete. I tried removing the SD card-no luck. Advice ?
Thanks again
I got the same problem , after the erase all data it just froze up ..... is it bricked. hopefully someone can help
I also had the same problem with my device but what i did is switch computers with Windows xp and with Activesync 4.5 that should do the trick
fixed
installed from XP instead of Vista...no problem at all. Appears Vista has trouble with recognizing the treo after loses activesync connection
seems my problem had to do with the unit, i did the sdupdater recovery tool from palm to no avail, finally i removed the battery and reinserted it and bam WM6 appeared after numerous attempt at upgrade and different ROMS tried. I asume the original upgrade got stuck and the removal of the battery, helped it finish. Who knows at least its not bricked
Can someone direct me to a walkthrough for a hard-reset on an xda mini s?
I have searched and searched these threads-alas! but i do recall that i can perform a hard reset to reload the o/s restart in basic mode and delete the unwanted software (which files it would be i dont know)
Also I've been following the guides given on this site to unlock cid (succsessful) and flash the rom on the pda, but cant get Vista to run the flash rom update utilities software to flash the rom to downgrade. It keeps closing it down. I've spent hours attemping this but have had to concede that Vista isnt wanting to play! yes i have installed active sync and the rom update version for Vista. Does the cab file that has to be installed on the pda have to be re-installed every time the thing is rebooted by the software? After dozens of goes i still have spl's of 2.1. (I only aim to flash the rom with the T-Mobile 2.6 version of WM5 to get a stable device at the moment)
Without wanting to spend valuable hours of my life persuing this i might just try it on a friends xp desktop Pc and see if i can get success.
Hi,
I have a htc pro 7 bought in the uk and was running mango running the latest 5.11 bootloader, and i wanted to go to the newtech rom.
I downloaded RUU_Gold7Pro_HTC_Europe_5.11.401.02_Radio_5.71.09.02a_22.51.50.21U_NT_Mango_8107_22L_by_ansar (1)
and
RUU_Gold_7Pro_Europe_5.10.401.03_SLSPL_by_ansar
from the links in the forum and they downloaded completely.
I first powered into bootloader with vol down and then used the ROMUpdateUtility to flash the RUU_Gold_7Pro_Europe_5.10.401.03_SLSPL_by_ansar file which seemed to flash fine, the progress bar completed and phone ended up in the bootloader again.
Then following the instructions i went to the other file but when i ran the update utility this time it found the phone and tried to update but never got past 0% before prompting me that it failed after a 10minish wait.
I was able to pull the battery and turn on back into bootloader mode but when i tried flashing the second file again, it failed. (Should I be reflashing the first again every time too?)
I wondered if the package was faulty and so downloaded 7713_GOLD_USA_CHT_CHS_JPN_KOR(www.dft.so) package of the dft release but the same thing, stalls at 0%.
I am left in bootloader (attached pic) and before trying to go back to stock mango using the zune update would like to know if there is a way to get to (ideally) the intrinsic rom.
Many thanks for your help,
Edit:
Adding that I am using windows 7, will try xp on my old PC as soon as zune software can download....
Also is there a way to get out bootloader mode? as restarting just goes back into the bootloader again...?
Edit 2
Solved!
Solved!
Ok Sorted it in the end, It was my fault, I missed a step.
If anyone else gets this problem (and the error 262 in romutility to go with it) and you are left in bootloader 1.7 its simple.
My first steps were right, first flash RUU_Gold_7Pro_Europe_5.10.401.03_SLSPL_by_ansar
and then you get the bootloader, and you then have the 1.7 bootloader problem, but are NOT yet ready for custom roms!
you must then flash RUU_Gold_HTC_Europe_1.22.401.01_Radio_5.63.09.13_3a_22.36.50.15U_by_ansar
(or similar) which will you give you a 1.22 radio.
From here you can then use the dft tool to get a rspl or hspl as needed, and from there you can then flash a custom rom.
I stupidly didn't realise and thought that the slspl replaced the downgrade, which it doesnt!
Glad I got that cleared up! Am now on the custom rom and all seems good!
Edit:
Exact same symptoms here http://forum.xda-developers.com/showthread.php?t=1318726
Bootloader:SPL - 1.7.2250.0
MID: PC921000
my current Windows Phone 7 Version: 7.0.7392.0
wont appear in zune, wont flash with custom rom, gives error 262.
多谢楼上分享！！！！
Help.
I completely screwed up but do not know where.
Had problems rooting but eventually made it with 'Automatic-Root-Enabler--U8510--v1.1' which worked first time.
Then used rom manager to install HuaweiU8510.zip which did not work so tried U8500_Huaweid.zip.
cache and Delvic cleared, rebooted and red huawei came on screen and there it stayed.
Removed battery, boot into recovery went into firmware update(image in dload but cant remember name) starts step 1 unpacking get yellow triangle with ! and says update failed. also tried again with zip files on sd card but back to red Huawei
Any one got any ideas please as I can get to the sd card but not to the internal memory and not adb/fastboot. So no way of getting a new recovery image into dload
Keith
Here in the netherlands there are no huawei phones too bad because on the wmc they announced some pretty good phones ..
But on topic...
Does your phone still start normal?
If not try flashing it back to stock firmware..
Maybe it's a problem with the custom rom...
Sarvesh50 said:
Here in the netherlands there are no huawei phones too bad because on the wmc they announced some pretty good phones ..
But on topic...
Does your phone still start normal?
If not try flashing it back to stock firmware..
Maybe it's a problem with the custom rom...
Click to expand...
Click to collapse
Thanks
1. no
2. trying once I get original rom
3. Funny it is every one I tried
Keith
I do own a galaxy s...
Once i had a similar problem...
It was caused by the filesystem
Samsung uses the rfs system but custom roms prefer ext4 which is better...
When your filesystem isn't compatible with your custom rom than you will have a startup problem so try to figure out if you have to change the filesystem.
can't post links from other sites cause i am a newby to xda forums this is really annoying
Check this
http://forum.xda-developers.com/archive/index.php/t-1200195.html
Hey guys,
Have had my Honor 6 H60-L02 FDD-LTE for little under 4 hours now
Already unlocked the bootloader and flashed CWM V.6.0.5.1
I installed the MIUI v4.9.6 Rom and i don't really like it, it keeps coming up saying com.android.phone has stopped, and when you update to v4.12 it gets stuck in a boot loop
So I don't think MIUI is very stable for the phone, and I want to install EMUI v3.0 (This isn't lollipop yet is it?)
Long story short, I figure i have to reflash the stock recovery firmware because CWM wont install an Update.App file
I downloaded the Honor 6 Multitool
When i get to install recovery, i choose my honor 6 model then it asks for EMUI 2.3 or 3.0, i tried all the 3.0's and they dont load the recovery, just go back into android
so i tried some of the EMUI 2.3's, i have no idea what each number at the end represent and which one suits my phone... i.e B118SP02?
So that is what stage im at, i have MIUI v4.9.6 with CWM V.6.0.5.1
And i am trying to install EMUI v3.0 stable
Any help would be pretty awesome, can say im slightly disappointed with the availability of roms for this phone, but hopefully this will change in the future
Ok ...
i will start from beginning , i will tell you how to get the last stable update for your phone .
witch is B310【EMUI3.0_Android4.4】.
First Download it from here it's 1GB .
or from here (you should translate it first and click on stable and download) .
Second continue with this link .
Attention : Do step 6 before 5 .
Or go to
http://forum.xda-developers.com/showpost.php?p=57274153&postcount=1
scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Links to the revert package etc are in the post too
Tried Myahyam's method and now the phone is stuck in a boot loop (shows the honor, powered by android splash, goes black then repeats the splash)
need to unbrick the damn thing now
im following the honor 6 multitools unbrick method, its in fastboot transfering files now, will report back when its done.
Just out of curiosity, besides MIUI and EMUI, what other roms are available to flash using CWM or TWRP?
Okay, managed to get CWM back on and sideload the MIUI4 rom again, just to prove to myself that I didn't brick my phone, so that parts all good!
I will have to try your method another time Julsen, i fly out on a 3 week holiday tomorrow morning, and want to load some games and movies to the phone to watch on the plane.
Hopefully when I come back in 3 weeks, there will be a better choice of roms to install using CWM/TWRK
If not, I will attempt your method Julsen, at least i now know how to fix any softboot/bootloop problems, good learning experience all up!
Here u will find couple of custom roms flashable via cwm
http://bbs.anzhi.com/forum.php?mod=forumdisplay&fid=1387&filter=typeid&typeid=15409&mobile=no
Sent from my H60-L02 using Tapatalk
Help me please!
I am having exactly the same problem that serpent is having.
Did any1 found solution?
Hey all, back from my 3 week trip
@nrpetonr i went to that site and grabbed two roms to flash using CWM, they both seem to put it into a boot loop
This phone is strange really, ever since i have unlocked the bootloader and put on a custom rom, its been the only rom that has worked, the rest all put me into a bootloop
Maybe i should try TWRP instead