Multipress time out / VDA V - HTC Vox

Hello
I have the problem with my VDA V (original Vodafon ROM) that multipress timeout (settings/accessibilty) don't react when I change value. I used to set 1/2 second (on my SDA with ROM 6.1 it works). But in case of my VDA V I can select each value (1/2 sec / 1 Sec. / no delay action) and in each case the timeout takes approx. 1 second. And thats to long.
Do you have a solution for this problem ?
regards Odiad

Related

8 to 12 seconds from PWR on to operate

Hi
I've noticed that from power on to operate fx. the phone or the calender (Pocket Informant Pro b4) it takes approx. 8 - 12 seconds before you can use the software.
I think thats too long a delay - any suggestions?
I've upgraded to XDA2_WM2k5_1.65b.96WWE from buzz (Thanx - U R the man). And the delay is still the same as with ver. 1.60c!
NIE

Display goes out in seconds?!

Hi there, my SP5m display always goes out (e.g. turns black) in less than 5 seconds even though I didn't specify such setting anywhere on my smartphone?! It doesn't keylock it, it just goes black and doesn't prevent key presses, whenever I hit a button it comes back to normal and it's a real pain for the moment!
FYI, I'm using WM6 perfect edition (thanks btw!) and here are my settings for "power management" options:
Backlight timeout on battery: 15 seconds
Display timeout: 1 minute
Light sensor: enable
By the way, what's the difference between backlight timeout and display timeout?
Also, I enabled the "Low light" application and modified some "Keylock Config" options...
I also played with "Multi Flash Light" if it helps you guys investigating... Btw, is there any other purpose for this application other than being a "flashlight"? Why was that application loaded in the ROM? Are you guys really using your smartphone as a flashlight? I'd like to know...
Thank you all for your time.
highmighty
Maybe this will help?
It sure helped me... but I modified another key instead of "LockLevel" cause this one looked OK.
Under HKEY_CURRENT_USER\ControlPanel\Power\Backlight the key "BatteryTimeout" was set to 0 instead of 15 seconds... and I don't know why?! I modified it and so far so good. It finally works like a charm
P.S. And what about Multi Flash Lite?
Thanks to all

Windows Mobile 6.1 ROM Links !!! Updated Daily!

I will be updating with all ROM's and Radios and any new info thats important to Kaiser owners!!!
Someone please take charge of the Kaiser Wiki... Anyone Standing up for the role?
FLASHING FOR N00BS 101...
#1 - download and install HardSPL for Kaisers
#2- Download the ROM you wish to install on your Kaiser MORE ADVANCED-(you can either unpack the RUU-signed.nbh using WinRar and use NBHextract.exe to extract just the OS.nb (if you do this you must use another exe to pack the OS.nb into a RUU_signed.nbh) or flash the whole thing which will include the radio)
#3- Reset up all your settings DO NOT try and install a back up from a different ROM cuz it won't work!
HARD SPL!! Thank You Pof!!
http://forum.xda-developers.com/showthread.php?t=334678
Custom_RUU: For wrapping cooked roms or just Radio or Splash screens for flashing great tool to have and once again thank you pof!
http://forum.xda-developers.com/showthread.php?t=334890
Building Custom Splash Screens!! Flashing Splash Screens!
http://forum.xda-developers.com/showthread.php?t=334907
AT-T KeyBoard Fix for those of you that flashed the HTC ship rom! Thanks to TaurusBullba!!
http://forum.xda-developers.com/showthread.php?t=334911
Kaiser PagePool Changing!! Here is the thread talking about that! Confirmed It works Since I am know running a 4MB HTC shipped ROM
http://forum.xda-developers.com/showthread.php?t=335026
To Flash a ROM or Radio simply use a tool to convert the .nb files in to .nbh format Dutty's NBH tool works great! then copy pof's Kaiser Custom_RUU into the same folder and then run the Custom_RUU and your device will start the upgrade process. With the new RUU when you flash a splash screen or radio only your device will not hard reset!
You can also flash any ROM now that HardSPL has been release! Simply download the rom you like and run the .exe and start flashing!
The Kaiser is just like the Hermes in many ways if you have questions you can always consult the Hermes WiKi for Ideas and Help!! Most of all please try to learn and share knowledge back to the Xda forums!
-Enter Bootloader mode: Hold Camera + Power buttons together and reset with stylus(thanks pof)
-HardReset: Hold Both soft keys in while pushing in Reset button :When prompted push Green Talk Button to clear data.
-Task2a with mtty: 'task 2a' command is enabled in kaiser bootloader (even in non-MFG bootloaders), it will try to correct non-factory marked bad blocks, but it will format everything and leave your device in bootloader mode. Make sure you download a ROM matching your CID before issuing 'task 2a'.
*MICROSD FLASHING*
***IMPORTANT***
Please make sure you have HardSPL on your device.
1. Get a 128MB MicroSD card (or whatever size you like) and format it (***please make sure you format it, but not just delete all contents on it)
2. find the ROM image you would like to use, normally namede RUU_Sign.nbh, and rename it to "KAISIMG.nbh"
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
4. You will first see a tri-color screen then the information on the card. Press power button to start flashing.
5. After all these are done, press the reset button located at the bottom of the phone to reset the device.
Windows Mobile 6.1 ROM Link!!
http://www.askajoke99.com/xdaDevelopers/index.php?path=New_WM6.1_Roms/
-Factory Shipped ROM form HTC
http://rapidshare.com/files/5781641...dio_sign_22.45.88.07_1.27.12.11_Ship.rar.html
OS 5.2.1620 build 18125.0.4.2
OS.nb Only no Radio, Splash screens, Or SPL
http://rapidshare.com/files/61817362/Kaiser_Ship.rar
-Cingular/AT-T Kaiser ROM
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
GSM Radio: 1.27.12.11
Protocol version: 22.45.88.07H
CE version: 1.57.502.2
OS build: Windows Mobile 6 AKU 0.4.2 Build 18125
-French ROM I guess for French peeps!
http://rapidshare.com/files/5807125...06.5_22.45.88.07_1.27.12.17_Ship.exe.zip.html
Radio: 1.27.12.17
-
-
-
-Non-RapidShare Hosted... Thanks Palmore
Cingular WWE Rom
http://www.crackedconsole.com/hosted...GULAR_WWE_.exe
HTC Kraiser Rom
http://www.crackedconsole.com/hosted...12.11_Ship.rar
SSPL v1
http://www.crackedconsole.com/hosted...ser-SSPLv1.zip
Hard-SPL v1
http://www.crackedconsole.com/hosted...-HardSPLv1.zip
-
COOL TWEAKS UNLOCKED BY REG EDITS: YOU WILL NEED A REG EDITING APP FOR THESE! MANY GOOD FREE ONES OUT...
-How to to activate the gps photo on the TytnII (like the Artemis): HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\
in the folder called P9 change the value "enabled" from 0 to 1.
Now if you launch the camera you must find a new menu called "gps photo".
-Screen Going Off Durning a Call Bother You?
If you would like it to never go of during a call then edit this registry key
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
From "1" to "0"
-To increase sensivity of TouchFlow: HKLM>Drivers>TouchPanel>PressureThreshold and modify to 200 or more
-Disable TouchFlo scroller: HKLM\Software\OEM\TFLOSettings\ and change EnableScroll key to 0
-Camera bug that makes each picture rotated 90 degrees clockwise by default: HKLM\Software\HTC\Camera\Image
Change the value named "EnableEncodePortrait" to 0 Default is "EnableEncodePortrait" Dword: 1
-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
Click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
Name the New Key as "Settings"
Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1 Soft reset your device
-Change the keyboard backlight duration
To change the duration of the keyboard backlight, you can set (example is 30 seconds):
HKCU\ControlPanel\Backlight\QKeyLedTimeout = 30 (DWORD decimal)
-Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
-If you want your GPRS (or EDGE) connection to always be on, set the following:
HKLM\Comm\ConnMgr\Providers\{7C4B7A38-}\Connections\|gprs connection name (my Isp/MediaNet} \AlwaysOn = 1 (DWORD decimal)
-Kaiser saves to \Storage Card\DCIM\100MEDIA, by defualt if you want your storage card instead edit the following registry key: HKLM\Software\HTC\Camera\General and change EnableDCIM from 1 to 0
-
-
-
austinsnyc said:
Enter Bootloader mode: Unknown
Click to expand...
Click to collapse
Hold Camera + Power buttons together and reset with stylus.
You can use the ROMs in the first post as long as your device is not CID locked. if it is CID locked you have to wait untill a CID-unlocker is released which will be soon.!
has anyone been able to view the Extended Rom? The old way (with Total Commander) doesn't seem to work.
-Mc
McHale said:
has anyone been able to view the Extended Rom? The old way (with Total Commander) doesn't seem to work.
-Mc
Click to expand...
Click to collapse
Good Question i have never tried to do that. I will look into that but I'm sure its not a problem with the correct REG settings.
Hello from Germany!
Is there any hope to get an German TyTN II ROM when CID-Unlocker is released.
Because the Branding of the VPA Compact V is horrible (Just like VPA Compact III/TyTN)
hopefull
Maolda
I'm sure once we start having more roms come out and a HardSPL and CID_unlocker the roms will start flowing. Everyone please remember that this HTC just came out so we are just starting to test the waters here and see what we can do. It took the hermes almost 7 months to really start to get going and only now is it almost perfect! Give it some time and you will be amazed at what comes out of this forum. I think we all got a little spoiled with are Hermes lol
Kaiser Registry Tweaks - Share your findings
I don't know whether this is the correct forum but thought of starting up a thread to share and grab Kaiser registry tweaks and fixes.
Camera bug that makes each picture rotated 90 degrees clockwise by default - Fix
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image
Change the value named "EnableEncodePortrait" to 0
Source
_________________________________________________
Disable SMS Sent Notification
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
Click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
Name the New Key as "Settings"
Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
Soft reset your device
Source
____________________________________________________
Screen Turning off Too quickly during a call - fix
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
Change Value from "1" to "0"
Source
Other methods to get the back light on
1> Turn the scroll wheel up/down - works
2> Press the camera button half way - works sometimes
____________________________________________________
Please share your findings on registry tweaks and fixes.
zachto said:
Thanks very much for the explanations. But, what exactly is CID?
Click to expand...
Click to collapse
CID is short for "Carrier ID" Lock (or commonly known as VENDOR LOCK).
It stops you from flashing your phone with ROM's released from different vendors.
i.e. Different language ROM's or a Manufacturer ROM (HTC) instead of the AT&T/T-mobile ROM.
-Syrius
Did all kaiser's ship with SPL/D of 1.56.00.00 ?
sounds like a very good idea
Activate GPS photo
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Camera\
in the folder called P9 change the value "enabled" from 0 to 1
original tweak thread
http://forum.xda-developers.com/showthread.php?t=332680
Disable TouchFlo scroller
HKLM\Software\OEM\TFLOSettings\
and change EnableScroll key to 0
Source: http://forum.xda-developers.com/showpost.php?p=1517577
zetajunkie said:
Did all kaiser's ship with SPL/D of 1.56.00.00 ?
Click to expand...
Click to collapse
Short answear is no, not all shipped with 1.56.00.00 there is another SPL that was shipped if you look in the thread about CID_Unlocking you will see.
Increase Touch-Flo Sensitivity
Increase Touch-Flo Sensitivity
To increase more sensivity go to
HKLM-DRIVERS-TOUCHPANEL-PRESSURE THRESHOLD
and modify to 200 or more.
Source
kavi said:
Increase Touch-Flo Sensitivity
To increase more sensivity go to
HKLM-DRIVERS-TOUCHPANEL-PRESSURE THRESHOLD
and modify to 200 or more.
Source
Click to expand...
Click to collapse
Marvelous. Just what I've been looking for. I settled on 400 for now.
Cheers.
Hey Guys,
When you have a new REG tweak can you just edit your original post and add everything to the same post. That way we dont have to search through pages and pages to find something. I will also be adding all new tweaks to the first post at first chance I get!
Thank you!
How to save changed registry after soft reset
Hi
Anybody knows how to maintain a registry changed value after making a soft reset?
Eg: don't show SIM contacts. We change the parameter at the registry; but making a soft reset something restore the default value.
Thanks
try powering down your device buy holding in the power button and then powering back up. I also thought i saw some place that this was a bug with the SIM manager but i could be wrong. Wouldnt be the first time.
Reg tweak wanted.
When i slid my tytn2 open it makes an extremely annoying sound.
I have tried to deactivate it, but it seems like if i do that i get either no alarm to wake up in the morning or i get no ringer when a phonecall is incoming.
What can i do??!!
By the way, thanks for the send sms tweak. FANTASTIC. Been looking for that for ages on my Universal.. First tweak on Kaiser. Is exactly that. Perfect.
BR
Daniel
Feel free to update links, I put these files on my home web server, off the rapidshare pay site, and will continue to maintain a rom stash on my servers
Cingular WWE Rom
http://www.crackedconsole.com/hosted/tilt/roms/CingularATT/RUU_Kaiser_CINGULAR_WWE_.exe
HTC Kraiser Rom
http://www.crackedconsole.com/hoste....5_radio_sign_22.45.88.07_1.27.12.11_Ship.rar
SSPL v1
http://www.crackedconsole.com/hosted/tilt/roms/SPL/kaiser-SSPLv1.zip
Hard-SPL v1
http://www.crackedconsole.com/hosted/tilt/roms/SPL/kaiser-HardSPLv1.zip
Enjoy, more to come =)

QWERTY Keyboard Time Out

I'm trying to set the QWERTY keyboard to timeout in 5 min rather than the default 10 sec. I've used phone alarm with the power profiles. And edited the registry:
qkeyledtimeout
No go. Help Please!

Power setings on LG Incite

Guys,
I have a problem with my power settings on LG Incite. My config is to turn off screen after 2 minutes if I am not using it, when I am running on internal power.
Now, when I run gps software, I wanna to disable this (iGo Amigo).
Trying adding this to either sys.txt and system.ini (igo) but nothing changed:
[power]
power_off_mode=0
Tested using also powermgm_state (0, 1 e 2), no change.
At last, tried:
[registry]
oninit1="HKLM\System\CurrentControlSet\Control\Power\Timeouts\ACSuspendTimeout:DWORD:0"
oninit2="HKLM\System\CurrentControlSet\Control\Power\Timeouts\BattSuspendTimeout:DWORD:0"
oninit3="HKCU\ControlPanel\BackLight\BatteryTimeout:DWORD:0"
oninit4="HKCU\ControlPanel\BackLight\ACTimeout:DWORD:0"
onexitreset1="HKLM\System\CurrentControlSet\Control\Power\Timeouts\ACSuspendTimeout:DWORD:300"
onexitreset2="HKLM\System\CurrentControlSet\Control\Power\Timeouts\BattSuspendTimeout:DWORD:60"
onexitreset3="HKCU\ControlPanel\BackLight\BatteryTimeout:DWORD:30"
onexitreset4="HKCU\ControlPanel\BackLight\ACTimeout:DWORD:60"
On sys.txt, no change.
Of course, using power settings on control panel works (WM 6.1) but that is not very touch (thumb) friendly.
Any other options?
Thanks.

Categories

Resources